- 05 Feb, 2016 1 commit
-
-
Jani Nikula authored
Make it cleaner to add more checks in the function. No functional changes. Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Reviewed-by:
Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Cc: drm-intel-fixes@lists.freedesktop.org # dependency on the next patch Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454667370-8001-1-git-send-email-jani.nikula@intel.com
-
- 04 Feb, 2016 11 commits
-
-
Jani Nikula authored
Skip v3 gpio element because the support is not there, and skip gpio element on non-vlv because the sideband code is vlv specific. v2: the gpio stuff is currently only supported on vlv (Ville) Cc: drm-intel-fixes@lists.freedesktop.org Fixes: 2a33d934 ("drm/i915/bios: add support for MIPI sequence block v3") Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Deepak M authored
Make the gpio read/write functions more generic iosf sideband read/write functions, taking the iosf port as argument. v2: rebase v3: rebase v4 by Jani: address Ville's review v5 by Jani: drop the PCI_DEVFN change (Ville) Signed-off-by:
Deepak M <m.deepak@intel.com> Reviewed-by:
-
Jani Nikula authored
Not needed. Signed-off-by:
-
Jani Nikula authored
Make it easier to spot duplicates. Signed-off-by:
-
Jani Nikula authored
Since sequence block v2 the second byte contains flags other than just pull up/down. Don't pass arbitrary data to the sideband interface. The rest may or may not work for sequence block v2, but there should be no harm done. Cc: stable@vger.kernel.org Reviewed-by:
-
Jani Nikula authored
Do not blindly trust the VBT data used for indexing. Cc: stable@vger.kernel.org Reviewed-by:
-
Paulo Zanoni authored
Now that we have top-level gen-independent hw_activate and hw_deactivate functions, set fbc->active directly from them, removing the duplicated code. Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454101060-23198-3-git-send-email-paulo.r.zanoni@intel.com
-
Paulo Zanoni authored
The recent introduction of a new caller of dev_priv->fbc.deactivate() is a good example of why we need unexport those functions. Anything outside intel_fbc.c should only call the functions exported by intel_fbc.c, so in order to enforce that, kill the function pointers stored inside dev_priv->fbc and replace them with functions that can't be called from outside intel_fbc.c. This should make it much harder for new code to call these functions from outside intel_fbc.c. Reviewed-by:
-
Paulo Zanoni authored
FBC is already deactivated at this point. Besides, nothing should be calling these lower-level function pointers. A few months ago, the only caller of dev_priv->fbc.deactivate was intel_pipe_set_base_atomic(), which was the kgdboc function. But the following commit added it to the SKL function: commit a8d201af Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Thu Jan 7 11:54:11 2016 +0100 drm/i915: Use plane state for primary plane updates. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: -
Tim Gore authored
WaIncreaseDefaultTLBEntries increases the number of TLB entries available for GPGPU workloads and gives significant ( > 10% ) performance gain for some OCL benchmarks. Put this in a new function that can be a place for workarounds that are GT related but not required per ring. This function is called on driver load and also after a reset and on resume, so it is safe for workarounds that get clobbered in these situations. This function currently has just this one workaround. v2: This was originally split into 3 patches but following review feedback was squashed into 1. I have not incorporated some style comments from Chris Wilson as I felt that after defining and intialising a temporary variable and then adding an additional if block to only write the register if the temporary variable had been set, this didn't really give a net gain. v3: Resending in the hope that BAT will run v4: Change subject line to trigger BAT (please!) Signed-off-by:
Tim Gore <tim.gore@intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454586574-2343-1-git-send-email-tim.gore@intel.com
-
Ramalingam C authored
We need to enable DSI PLL before configuring the DSI registers. This has worked before on BYT/CHV, but BXT is more fussy. Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Mika Kahola <mika.kahola@intel.com> Tested-by: Mika Kahola <mika.kahola@intel.com> # BXT Tested-by: Jani Nikula <jani.nikula@intel.com> # BYT Signed-off-by:
-
- 03 Feb, 2016 3 commits
-
-
Chris Wilson authored
commit 033908ae Author: Dave Gordon <david.s.gordon@intel.com> Date: Thu Dec 10 18:51:23 2015 +0000 drm/i915: mark GEM object pages dirty when mapped & written by the CPU introduced a check into i915_gem_object_get_dirty_pages() that returned a NULL pointer when called with a bad object, one that was not backed by shmemfs. This WARN was too strict as we can work on all struct page backed objects, and resulted in a WARN + GPF for existing userspace. In order to differentiate the various types of objects, add a new flags field to the i915_gem_object_ops struct to describe their capabilities, with the first flag being whether the object has struct pages. v2: Drop silly const before an integer in the structure declaration. Testcase: igt/gem_userptr_blits/relocations Reported-and-tested-by:
Kristian Høgsberg Kristensen <krh@bitplanet.net> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Gordon <david.s.gordon@intel.com> Cc: Kristian Høgsberg Kristensen <krh@bitplanet.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Dave Gordon <david.s.gordon@intel.com> Reviewed-by:
Michal Winiarski <michal.winiarski@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453487551-16799-1-git-send-email-chris@chris-wilson.co.uk
-
Matt Roper authored
Due to our lack of two-step watermark programming, our driver has historically pretended that the cursor plane is always on for the purpose of watermark calculations; this helps avoid serious flickering when the cursor turns off/on (e.g., when the user moves the mouse pointer to a different screen). That workaround was accidentally dropped as we started working toward atomic watermark updates. Since we still aren't quite there yet with two-stage updates, we need to resurrect the workaround and treat the cursor as always active. v2: Tweak cursor width calculations slightly to more closely match the logic we used before the atomic overhaul began. (Ville) Cc: simdev11@outlook.com Cc: manfred.kitzbichler@gmail.com Cc: drm-intel-fixes@lists.freedesktop.org Reported-by: simdev11@outlook.com Reported-by: manfred.kitzbichler@gmail.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93892 Fixes: 43d59eda ("drm/i915: Eliminate usage of plane_wm_parameters from ILK-style WM code (v2)") Signed-off-by:Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454479611-6804-1-git-send-email-matthew.d.roper@intel.com
-
Matt Roper authored
In commit bfb9faab8 we added a workaround for some BXT BIOS that fail to properly initialize the DDI_A_4_LANES bit of the control register (4 lanes is the only valid configuration on BXT since there is no DDI E to share with). A recent patch added some additional checks on this register bit before the workaround gets applied; this breaks eDP on BXT in some settings. Some minor code shuffling is all we need to restore the workaround. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: 7cd87cb80 ("drm/i915: Check max number of lanes when registering DDI ports") Signed-off-by:
-
- 02 Feb, 2016 7 commits
-
-
Matt Roper authored
Our attempts save/restore panel power state in i915_suspend.c are causing unclaimed register warnings on BXT since the registers for this platform differ from older platforms. The big hammer suspend/resume shouldn't be necessary for PP since the connector/encoder hooks should already handle this. In theory we could remove this for all platforms, but in practice it's likely that would cause some regressions since older platforms with LVDS may have incomplete PP handling. For now we'll leave the PCH save/restore alone and change the non-PCH branch to only operate on gen <= 4 so that BXT and future platforms aren't included. v2: Typo fix: s/||/&&/ v3: Change non-PCH condition to a gen <= 4 test rather than listing VLV/CHV/BXT as specific platforms to exclude; should be more future-proof as we add new platforms. (Daniel) Cc: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by: -
Imre Deak authored
Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
David Weinehall <david.weinehall@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454071949-24677-4-git-send-email-imre.deak@intel.com
-
Imre Deak authored
While not being able to enable MSI interrupts may be a normal circumstance, for debugging it may still be a useful information, so emit an info about this. Signed-off-by:
-
Imre Deak authored
Atm we wouldn't catch these errors or on the error path we would end up with a division-by-zero, fix this up. Signed-off-by:
-
Imre Deak authored
While we are calling intel_dp_aux_transfer() with msg->size=0 whenever msg->buffer is NULL, passing NULL to memcpy() is undefined according to the ISO C standard. I haven't found any notes about this in the GNU C's or the kernel's documentation of the function and can't imagine what it would do with the NULL ptr. To better document this use of the parameters it still make sense to add an explicit check for this to the code. Signed-off-by:
-
Imre Deak authored
Add PCIIDs for new versions of the SOC, based on BSpec. Also add the name of the versions as code comment where this is available. The new versions don't have any changes visible to the kernel driver. Signed-off-by:
-
Patrik Jakobsson authored
On SKL and KBL we can have pipe A/B/C disabled by fuse settings. The pipes must be fused in descending order (e.g. C, B+C, A+B+C). We simply decrease info->num_pipes if we find a valid fused out config. v2: Don't store the pipe disabled mask in device info (Damien) v3: Don't check FUSE_STRAP register for pipe c disabled Cc: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Reviewed-by:
Damien Lespiau <damien.lespiau@intel.com> [Jani: fixed some checkpatch indentation complaints] Signed-off-by:
-
- 01 Feb, 2016 4 commits
-
-
Rodrigo Vivi authored
Unfortunately we don't know all panels and platforms out there and we found internal prototypes without VBT proper set but where only link in standby worked well. So, before enable PSR by default let's instrument the PSR parameter in a way that we can identify different panels out there that might require or work better with link standby mode. It is also useful to say that for backward compatibility I'm not changing the meaning of this flag. So "0" still means disabled and "1" means enabled with full support and maximum power savings. v2: Use positive value instead of negative for different operation mode as suggested by Daniel. v3: As Paulo suggested use 2 to force link standby and 3 to force link fully on. Also split the link_standby introduction in a separated patch. v4: Use DRM_ERROR for link off request on platforms that don't support and Remove the quirk promise. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: -
Rodrigo Vivi authored
Link standby support has been deprecated with 'commit 89251b17 ("drm/i915: PSR: deprecate link_standby support for core platforms.")' The reason for that is that main link in full off offers more power savings and on HSW and BDW implementations on source side had known bugs with link standby. However that same HSD report only mentions BDW and HSW and tells that a fix was going to new platforms. Since on Skylake link standby didn't cause the bad blank flickering screens seen on HSW and BDW let's respect VBT again for this and future platforms. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
Current code not just block link_standby for non DDI platforms but also block PSR from work on other ports B/C/D/E. So, besides change any behaviour let's just fix the mess a bit here and reuse HSW check to block the other ports and reduce the second if only to link stadnby request. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Mat Martineau authored
The driver does not load firmware for unknown steppings, so these new steppings must be added to the list. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Reviewed-by:
-
- 29 Jan, 2016 14 commits
-
-
Rodrigo Vivi authored
When we stop the sink CRC calculation we wait a while until the counter is reset to zero and return -ETIMEDOUT. However the sink crc was calculated already by this point so we just ignore this return at the main function. So, let's also ignore the message and put it as a debug message instead of an error one. The message might still be useful when debuging test failures so we could be able to know something was not going so well with sink crc stop. v2: Improve log message. Reference: https://bugs.freedesktop.org/show_bug.cgi?id=93694 Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Paulo Zanoni authored
The FBC fixes we've been doing in the last months required a lot of refactor, so functions that were once big and called from different spots are now small and called only once. IMHO now it's better to just move the contents of these functions to their only callers since this reduces the number of indirections while reading the code. While at it, also improve the related comments a little bit. Signed-off-by:
-
Paulo Zanoni authored
We already make sure we run intel_fbc_update_update during modesets and page flips, and this function takes care of deactivating FBC, so it shouldn't be possible for us to reach the condition we check at intel_fbc_work_fn. So instead of grabbing framebuffer references and adding a lot of code to track when we need to free them, just don't track anything at all since we shouldn't need to. v2: Rebase. Reviewed-by:
-
Paulo Zanoni authored
Make sure we do the pre_update - which also deactivates FBC - before we actually schedule the page flip, just to make sure we don't flip to the new FB with FBC still activated for the previous FB. Reviewed-by:
-
Paulo Zanoni authored
We don't actually use fb_id anywhere. We already compare all parameters that matter to the hardware: pixel format, stride, fence_reg and ggtt_offset. The ID shouldn't make a difference. Besides, we already update the FBC data at every modeset/flip, so this can't change behind our backs. Reviewed-by:
-
Paulo Zanoni authored
Our dmesg messages started being misleading after we converted to the enable+activate model: we always print "Disabling FBC", even when we're just deactivating it. So, for example, when I boot my machine and do "dmesg | grep -i fbc", I see: [drm:intel_fbc_enable] Enabling FBC on pipe A [drm:set_no_fbc_reason] Disabling FBC: framebuffer not tiled or fenced but then, if I read the debugfs file, I will see: $ sudo cat i915_fbc_status FBC enabled Compressing: yes so we can conclude that dmesg is misleading, since FBC is actually enabled. What happened is that we deactivated FBC due to fbcon not being tiled, but when we silently reactivated it when the display manager started. We don't print activation messages since there may be way too many of these operations per second during normal desktop usage. One possible solution would be to change set_no_fbc_reason to correctly differentiate between disable and deactivation, but we removed support from printing activation/deactivation messages in the past because they were too frequent. So instead of doing this, let's just not print anything on dmesg, and leave the debugfs file if the user needs to investigate something. We already print when we enable and disable FBC anyway on a given pipe, so this should already help triaging bugs. Reviewed-by:
-
Paulo Zanoni authored
During FBC invalidation, don't call intel_fbc_deactivate if it's not enabled. This doesn't fix any bug, but helps making the interface saner. Reviewed-by:
-
Paulo Zanoni authored
Move intel_fbc_enable to a place where it is called regardless of the "modeset" variable, and make sure intel_fbc_enable can be called multiple times without intel_fbc_disable being called. Reviewed-by:
-
Paulo Zanoni authored
Instead of duplicating the calls for every platform, let's just put them in the correct places inside intel_atomic_commit. This will also make it easier for us to move the enable call in order to support fasbtoot. Reviewed-by:
-
Paulo Zanoni authored
This opens the possibility of implementing nicer schemes to choose the CRTC, such as checking the amount of stolen memory available, or choosing the best pipe on platforms that don't die FBC to pipe or plane A. This code was written for another refactor that I ended up discarding, so I don't actually need it, but I figured this patch would be an improvement on its own so I kept it on the series. Reviewed-by:
-
Paulo Zanoni authored
We already have a dev variable, there's no need to access state->dev. Also, I plan to add another dev_priv user here, so declare one for the current user. Reviewed-by:
-
Paulo Zanoni authored
Older FBC platforms have this restriction where FBC can't be enabled if multiple pipes are enabled. In the current code, we disable FBC before the second pipe becomes visible. One of the problems with this code is that the current multiple_pipes_ok() implementation just iterates through all CRTCs looking at their states, but it doesn't make sure that the state locks are grabbed. It also can't just grab the locks for every CRTC since this would kill one of the biggest advantages of atomic modesetting. After the recent FBC changes, we now have the appropriate locks for the given CRTC, so we can just try to maintain the state of each CRTC and update it once intel_fbc_pre_update is called. As a last note, I don't have gen 2/3 machines to test this code. My current plan is to enable FBC on just the newer platforms, so this patch is just an attempt to get the gen 2/3 code at least looking sane, so if one day someone decide to fix FBC on these platforms, they may have less work to do. Not-tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (only on HSW+) Reviewed-by:
-
Paulo Zanoni authored
Just to be sure nothing will survive a module unload. We need to do this after the unlock in order to make sure the function won't get stuck trying to grab the lock we already own while we wait for it to finish. Reported-by:
Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Paulo Zanoni authored
Instead of: - intel_fbc_disable_crtc(crtc) - intel_fbc_disable(dev_priv) we now have: - intel_fbc_disable(crtc) - intel_fbc_global_disable(dev_priv) This is because all the other functions that take a CRTC are called - intel_fbc_something(crtc) Instead of: - intel_fbc_something_crtc(crtc) And I also hope that the word "global" is going to help make it more explicit that "global" is the unusual case, not the opposite. Reported-by:
-
