Skip to content

L
linux
Switch branch/tag
  1. 13 Nov, 2009 1 commit
  3. 05 Nov, 2009 2 commits
    • Martin Schwidefsky's avatar
      nohz: Introduce arch_needs_cpu · 3c5d92a0
      Martin Schwidefsky authored 
      Allow the architecture to request a normal jiffy tick when the system
goes idle and tick_nohz_stop_sched_tick is called . On s390 the hook is
used to prevent the system going fully idle if there has been an
interrupt other than a clock comparator interrupt since the last wakeup.

On s390 the HiperSockets response time for 1 connection ping-pong goes
down from 42 to 34 microseconds. The CPU cost decreases by 27%.
Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
LKML-Reference: <20090929122533.402715150@de.ibm.com>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      3c5d92a0
    • Martin Schwidefsky's avatar
      nohz: Reuse ktime in sub-functions of tick_check_idle. · eed3b9cf
      Martin Schwidefsky authored 
      On a system with NOHZ=y tick_check_idle calls tick_nohz_stop_idle and
tick_nohz_update_jiffies. Given the right conditions (ts->idle_active
and/or ts->tick_stopped) both function get a time stamp with ktime_get.
The same time stamp can be reused if both function require one.

On s390 this change has the additional benefit that gcc inlines the
tick_nohz_stop_idle function into tick_check_idle. The number of
instructions to execute tick_check_idle drops from 225 to 144
(without the ktime_get optimization it is 367 vs 215 instructions).

before:

 0)               |  tick_check_idle() {
 0)               |    tick_nohz_stop_idle() {
 0)               |      ktime_get() {
 0)               |        read_tod_clock() {
 0)   0.601 us    |        }
 0)   1.765 us    |      }
 0)   3.047 us    |    }
 0)               |    ktime_get() {
 0)               |      read_tod_clock() {
 0)   0.570 us    |      }
 0)   1.727 us    |    }
 0)               |    tick_do_update_jiffies64() {
 0)   0.609 us    |    }
 0)   8.055 us    |  }

after:

 0)               |  tick_check_idle() {
 0)               |    ktime_get() {
 0)               |      read_tod_clock() {
 0)   0.617 us    |      }
 0)   1.773 us    |    }
 0)               |    tick_do_update_jiffies64() {
 0)   0.593 us    |    }
 0)   4.477 us    |  }
Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
Cc: john stultz <johnstul@us.ibm.com>
LKML-Reference: <20090929122533.206589318@de.ibm.com>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      eed3b9cf
  5. 05 Oct, 2009 2 commits
    • john stultz's avatar
      time: Remove xtime_cache · 7bc7d637
      john stultz authored 
      With the prior logarithmic time accumulation patch, xtime will now
always be within one "tick" of the current time, instead of
possibly half a second off.

This removes the need for the xtime_cache value, which always
stored the time at the last interrupt, so this patch cleans that up
removing the xtime_cache related code.

This is a bit simpler, but still could use some wider testing.
Signed-off-by: default avatarJohn Stultz <johnstul@us.ibm.com>
Acked-by: default avatarThomas Gleixner <tglx@linutronix.de>
Reviewed-by: default avatarJohn Kacur <jkacur@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <1254525855.7741.95.camel@localhost.localdomain>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      7bc7d637
    • john stultz's avatar
      time: Implement logarithmic time accumulation · a092ff0f
      john stultz authored 
      Accumulating one tick at a time works well unless we're using NOHZ.
Then it can be an issue, since we may have to run through the loop
a few thousand times, which can increase timer interrupt caused
latency.

The current solution was to accumulate in half-second intervals
with NOHZ. This kept the number of loops down, however it did
slightly change how we make NTP adjustments. While not an issue
with NTPd users, as NTPd makes adjustments over a longer period of
time, other adjtimex() users have noticed the half-second
granularity with which we can apply frequency changes to the clock.

For instance, if a application tries to apply a 100ppm frequency
correction for 20ms to correct a 2us offset, with NOHZ they either
get no correction, or a 50us correction.

Now, there will always be some granularity error for applying
frequency corrections. However with users sensitive to this error
have seen a 50-500x increase with NOHZ compared to running without
NOHZ.

So I figured I'd try another approach then just simply increasing
the interval. My approach is to consume the time interval
logarithmically. This reduces the number of times through the loop
needed keeping latency down, while still preserving the original
granularity error for adjtimex() changes.

Further, this change allows us to remove the xtime_cache code
(patch to follow), as xtime is always within one tick of the
current time, instead of the half-second updates it saw before.

An earlier version of this patch has been shipping to x86 users in
the RedHat MRG releases for awhile without issue, but I've reworked
this version to be even more careful about avoiding possible
overflows if the shift value gets too large.
Signed-off-by: default avatarJohn Stultz <johnstul@us.ibm.com>
Acked-by: default avatarThomas Gleixner <tglx@linutronix.de>
Reviewed-by: default avatarJohn Kacur <jkacur@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <1254525473.7741.88.camel@localhost.localdomain>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      a092ff0f
  7. 04 Oct, 2009 8 commits
  9. 03 Oct, 2009 6 commits
  11. 02 Oct, 2009 21 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7