- 07 Oct, 2016 40 commits
-
-
Erez Shitrit authored
commit 68c6bcdd upstream. The function send_leave sets the member: group->query_id (group->query_id = ret) after calling the sa_query, but leave_handler can be executed before the setting and it might delete the group object, and will get a memory corruption. Additionally, this patch gets rid of group->query_id variable which is not used. Fixes: faec2f7b ('IB/sa: Track multicast join/leave requests') Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Erez Shitrit authored
commit 546481c2 upstream. When a new CM connection is being requested, ipoib driver copies data from the path pointer in the CM/tx object, the path object might be invalid at the point and memory corruption will happened later when now the CM driver will try using that data. The next scenario demonstrates it: neigh_add_path --> ipoib_cm_create_tx --> queue_work (pointer to path is in the cm/tx struct) #while the work is still in the queue, #the port goes down and causes the ipoib_flush_paths: ipoib_flush_paths --> path_free --> kfree(path) #at this point the work scheduled starts. ipoib_cm_tx_start --> copy from the (invalid)path pointer: (memcpy(&pathrec, &p->path->pathrec, sizeof pathrec);) -> memory corruption. To fix that the driver now starts the CM/tx connection only if that specific path exists in the general paths database. This check is protected with the relevant locks, and uses the gid from the neigh member in the CM/tx object which is valid according to the ref count that was taken by the CM/tx. Fixes: 839fcaba ('IPoIB: Connected mode experimental support') Signed-off-by:
-
Radim Krčmář authored
commit dccbfcf5 upstream. If vmcs12 does not intercept APIC_BASE writes, then KVM will handle the write with vmcs02 as the current VMCS. This will incorrectly apply modifications intended for vmcs01 to vmcs02 and L2 can use it to gain access to L0's x2APIC registers by disabling virtualized x2APIC while using msr bitmap that assumes enabled. Postpone execution of vmx_set_virtual_x2apic_mode until vmcs01 is the current VMCS. An alternative solution would temporarily make vmcs01 the current VMCS, but it requires more care. Fixes: 8d14695f ("x86, apicv: add virtual x2apic support") Reported-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Wei Yongjun authored
commit 6a8b0c6b upstream. free_irq() expects the same device identity that was passed to corresponding request_irq(), otherwise the IRQ is not freed. Fixes: e1f7c9ee ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by:
Wei Yongjun <weiyj.lk@gmail.com> Acked-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Michal Hocko authored
commit 735f2770 upstream. Commit fec1d011 ("[PATCH] Disable CLONE_CHILD_CLEARTID for abnormal exit") has caused a subtle regression in nscd which uses CLONE_CHILD_CLEARTID to clear the nscd_certainly_running flag in the shared databases, so that the clients are notified when nscd is restarted. Now, when nscd uses a non-persistent database, clients that have it mapped keep thinking the database is being updated by nscd, when in fact nscd has created a new (anonymous) one (for non-persistent databases it uses an unlinked file as backend). The original proposal for the CLONE_CHILD_CLEARTID change claimed (https://lkml.org/lkml/2006/10/25/233): : The NPTL library uses the CLONE_CHILD_CLEARTID flag on clone() syscalls : on behalf of pthread_create() library calls. This feature is used to : request that the kernel clear the thread-id in user space (at an address : provided in the syscall) when the thread disassociates itself from the : address space, which is done in mm_release(). : : Unfortunately, when a multi-threaded process incurs a core dump (such as : from a SIGSEGV), the core-dumping thread sends SIGKILL signals to all of : the other threads, which then proceed to clear their user-space tids : before synchronizing in exit_mm() with the start of core dumping. This : misrepresents the state of process's address space at the time of the : SIGSEGV and makes it more difficult for someone to debug NPTL and glibc : problems (misleading him/her to conclude that the threads had gone away : before the fault). : : The fix below is to simply avoid the CLONE_CHILD_CLEARTID action if a : core dump has been initiated. The resulting patch from Roland (https://lkml.org/lkml/2006/10/26/269) seems to have a larger scope than the original patch asked for. It seems that limitting the scope of the check to core dumping should work for SIGSEGV issue describe above. [Changelog partly based on Andreas' description] Fixes: fec1d011 ("[PATCH] Disable CLONE_CHILD_CLEARTID for abnormal exit") Link: http://lkml.kernel.org/r/1471968749-26173-1-git-send-email-mhocko@kernel.orgSigned-off-by:
Michal Hocko <mhocko@suse.com> Tested-by:
William Preston <wpreston@suse.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Andreas Schwab <schwab@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Peter Ujfalusi authored
commit a8719670 upstream. Fixes: ddd17531 ("ASoC: omap-mcpdm: Clean up with devm_* function") Managed irq request will not doing any good in ASoC probe level as it is not going to free up the irq when the driver is unbound from the sound card. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Reported-by:
Russell King <linux@armlinux.org.uk> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Subash Abhinov Kasiviswanathan authored
commit e7d316a0 upstream. We have scripts which write to certain fields on 3.18 kernels but this seems to be failing on 4.4 kernels. An entry which we write to here is xfrm_aevent_rseqth which is u32. echo 4294967295 > /proc/sys/net/core/xfrm_aevent_rseqth Commit 230633d1 ("kernel/sysctl.c: detect overflows when converting to int") prevented writing to sysctl entries when integer overflow occurs. However, this does not apply to unsigned integers. Heinrich suggested that we introduce a new option to handle 64 bit limits and set min as 0 and max as UINT_MAX. This might not work as it leads to issues similar to __do_proc_doulongvec_minmax. Alternatively, we would need to change the datatype of the entry to 64 bit. static int __do_proc_doulongvec_minmax(void *data, struct ctl_table { i = (unsigned long *) data; //This cast is causing to read beyond the size of data (u32) vleft = table->maxlen / sizeof(unsigned long); //vleft is 0 because maxlen is sizeof(u32) which is lesser than sizeof(unsigned long) on x86_64. Introduce a new proc handler proc_douintvec. Individual proc entries will need to be updated to use the new handler. [akpm@linux-foundation.org: coding-style fixes] Fixes: 230633d1 ("kernel/sysctl.c:detect overflows when converting to int") Link: http://lkml.kernel.org/r/1471479806-5252-1-git-send-email-subashab@codeaurora.orgSigned-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Kees Cook <keescook@chromium.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by:
-
Michael Ellerman authored
commit 66443efa upstream. When booting from an OpenFirmware which supports it, we use the "ibm,client-architecture-support" firmware call to communicate our capabilities to firmware. The format of the structure we pass to firmware is specified in PAPR (Power Architecture Platform Requirements), or the public version LoPAPR (Linux on Power Architecture Platform Reference). Referring to table 244 in LoPAPR v1.1, option vector 5 contains a 4 byte field at bytes 17-20 for the "Platform Facilities Enable". This is followed by a 1 byte field at byte 21 for "Sub-Processor Represenation Level". Comparing to the code, there we have the Platform Facilities options (OV5_PFO_*) at byte 17, but we fail to pad that field out to its full width of 4 bytes. This means the OV5_SUB_PROCESSORS option is incorrectly placed at byte 18. Fix it by adding zero bytes for bytes 18, 19, 20, and comment the bytes to hopefully make it clearer in future. As far as I'm aware nothing actually consumes this value at this time, so the effect of this bug is nil in practice. It does mean we've been incorrectly setting bit 15 of the "Platform Facilities Enable" option for the past ~3 1/2 years, so we should avoid allocating that bit to anything else in future. Fixes: df77c799 ("powerpc/pseries: Update ibm,architecture.vec for PAPR 2.7/POWER8") Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Florian Fainelli authored
commit f823a2aa upstream. wlc_phy_txpower_get_current() does a logical OR of power->flags, which presumes that power.flags was initiliazed earlier by the caller, unfortunately, this is not the case, so make sure we zero out the struct tx_power before calling into wlc_phy_txpower_get_current(). Reported-by: coverity (CID 146011) Fixes: 5b435de0 ("net: wireless: add brcm80211 drivers") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Florian Fainelli authored
commit 5c5fa1f4 upstream. In case dma_mapping_error() returns an error in dma_rxfill, we would be leaking a packet that we allocated with brcmu_pkt_buf_get_skb(). Reported-by: coverity (CID 1081819) Fixes: 67d0cf50 ("brcmsmac: Fix WARNING caused by lack of calls to dma_mapping_error()") Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Florian Fainelli authored
commit 3bdae810 upstream. In case brcmf_sdiod_recv_chain() cannot complete a succeful call to brcmf_sdiod_buffrw, we would be leaking glom_skb and not free it as we should, fix this. Reported-by: coverity (CID 1164856) Fixes: a413e39a ("brcmfmac: fix brcmf_sdcard_recv_chain() for host without sg support") Signed-off-by:
-
Wei Yongjun authored
commit 979cf59a upstream. Fix to return error code -ENODEV from the error handling case instead of 0, as done elsewhere in this function. Fixes: 87b2bdf0 ("ASoC: Intel: Skylake: Initialize NHLT table") Signed-off-by:
Vinod Koul <vinod.kou@intel.com> Signed-off-by:
-
Trond Myklebust authored
commit c001c87a upstream. We should always do a layoutcommit after commit to DS, except if the layout segment we're using has set FF_FLAGS_NO_LAYOUTCOMMIT. Fixes: d67ae825 ("pnfs/flexfiles: Add the FlexFile Layout Driver") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit 73e6c5d8 upstream. According to the errata https://www.rfc-editor.org/errata_search.php?rfc=5661&eid=2751 we should always send layout commit after a commit to DS. Fixes: bc7d4b8f ("nfs/filelayout: set layoutcommit...") Signed-off-by:
-
Chuck Lever authored
commit a4e187d8 upstream. Before commit 778be232 ("NFS do not find client in NFSv4 pg_authenticate"), the Linux callback server replied with RPC_AUTH_ERROR / RPC_AUTH_BADCRED, instead of dropping the CB request. Let's restore that behavior so the server has a chance to do something useful about it, and provide a warning that helps admins correct the problem. Fixes: 778be232 ("NFS do not find client in NFSv4 ...") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Tested-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Chuck Lever authored
commit 0533b130 upstream. If an RPC program does not set vs_dispatch and pc_func() returns rpc_drop_reply, the server sends a reply anyway containing a single word containing the value RPC_DROP_REPLY (in network byte-order, of course). This is a nonsense RPC message. Fixes: 9e701c61 ("svcrpc: simpler request dropping") Signed-off-by:
-
Alexandre Belloni authored
commit 3935e087 upstream. mbr_ds is an integer, don't use %pad to print it. Fixes: commit 268914f4 ("dmaengine: at_xdmac: use %pad format string for dma_addr_t") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Dan Carpenter authored
commit dd7328e4 upstream. pci_dma_mapping_error() returns true on error and false on success. Fixes: fd6ddfa4 ('fnic: check pci_map_single() return value') Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Dan Carpenter authored
commit 55f1cf83 upstream. The pio_dev[] array has MAX_NR_PIO_DEVICES elements so the > should be >=. Fixes: 5f97f7f9 ('[PATCH] avr32 architecture') Signed-off-by:
-
Sven Eckelmann authored
commit aaab50fc upstream. The function ar9003_hw_apply_minccapwr_thresh takes as second parameter not a pointer to the channel but a boolean value describing whether the channel is 2.4GHz or not. This broke (according to the origin commit) the ETSI regulatory compliance on 5GHz channels. Fixes: 3533bf6b ("ath9k: Fix regulatory compliance") Signed-off-by:
Sven Eckelmann <sven@narfation.org> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Arnd Bergmann authored
commit d7e92e15 upstream. When CONFIG_INPUT is disabled, multiple gspca backend drivers print compile-time warnings about unused variables: media/usb/gspca/cpia1.c: In function 'sd_stopN': media/usb/gspca/cpia1.c:1627:13: error: unused variable 'sd' [-Werror=unused-variable] media/usb/gspca/konica.c: In function 'sd_stopN': media/usb/gspca/konica.c:246:13: error: unused variable 'sd' [-Werror=unused-variable] This annotates the variables as __maybe_unused, to let the compiler know that they are declared intentionally. Fixes: ee186fd9 ("[media] gscpa_t613: Add support for the camera button") Fixes: c2f644ae ("[media] gspca_cpia1: Add support for button") Fixes: b517af72 ("V4L/DVB: gspca_konica: New gspca subdriver for konica chipset using cams") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Dan Carpenter authored
commit e44c153b upstream. The code is checking for negative returns but it should be checking for zero. Fixes: aab3125c ('[media] em28xx: add support for registering multiple i2c buses') Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit fa1ce54e upstream. drivers/nfc/fdp/fdp.c: In function ‘fdp_nci_patch_otp’: drivers/nfc/fdp/fdp.c:373: warning: comparison is always false due to limited range of data type drivers/nfc/fdp/fdp.c: In function ‘fdp_nci_patch_ram’: drivers/nfc/fdp/fdp.c:444: warning: comparison is always false due to limited range of data type fdp_nci_create_conn() may return a negative error code, which is silently ignored by assigning it to a u8. Change conn_id from u8 to int to fix this. Fixes: a06347c0 ("NFC: Add Intel Fields Peak NFC solution driver") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
striebit authored
commit 849a9627 upstream. Currently the state sent in SF configuration is always FULL_ON. This commit sets the correct state (e.g. INIT_OFF when station is not associated). Fixes: commit f4a3ee49 ("iwlwifi: mvm: Always enable the smart FIFO") Signed-off-by:
Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
James Hogan authored
commit cdf8b463 upstream. AT_VECTOR_SIZE_ARCH should be defined with the maximum number of NEW_AUX_ENT entries that ARCH_DLINFO can contain, but it wasn't defined for tile at all even though ARCH_DLINFO will contain one NEW_AUX_ENT for the VDSO address. This shouldn't be a problem as AT_VECTOR_SIZE_BASE includes space for AT_BASE_PLATFORM which tile doesn't use, but lets define it now and add the comment above ARCH_DLINFO as found in several other architectures to remind future modifiers of ARCH_DLINFO to keep AT_VECTOR_SIZE_ARCH up to date. Fixes: 4a556f4f ("tile: implement gettimeofday() via vDSO") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Signed-off-by:
Chris Metcalf <cmetcalf@mellanox.com> Signed-off-by:
-
Geliang Tang authored
commit 52d210d9 upstream. In ee1d2674 ("pstore: add pstore unregister") I added: .owner = THIS_MODULE, in both pstore_fs_type and pstore_file_operations to increase a reference count when pstore filesystem is mounted and pstore file is opened. But, it's repetitive. There is no need to increase the opened reference count. We only need to increase the mounted reference count. When a file is opened, the filesystem can't be unmounted. Hence the pstore module can't be unloaded either. So I drop the opened reference count in this patch. Fixes: ee1d2674 ("pstore: add pstore unregister") Signed-off-by:
Geliang Tang <geliangtang@163.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Omar Sandoval authored
commit 52b9c330 upstream. If ->queue_rq() returns BLK_MQ_RQ_QUEUE_OK, we use continue and skip over the rest of the loop body. However, dptr is assigned later in the loop body, and the BLK_MQ_RQ_QUEUE_OK case is exactly the case that we'd want it for. NVMe isn't actually using BLK_MQ_F_DEFER_ISSUE yet, nor is any other in-tree driver, but if the code's going to be there, it might as well work. Fixes: 74c45052 ("blk-mq: add a 'list' parameter to ->queue_rq()") Signed-off-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Nishanth Menon authored
commit 61dc0a44 upstream. pm_runtime_get_sync does return a error value that must be checked for error conditions, else, due to various reasons, the device maynot be enabled and the system will crash due to lack of clock to the hardware module. Before: 12.562784] [00000000] *pgd=fe193835 12.562792] Internal error: : 1406 [#1] SMP ARM [...] 12.562864] CPU: 1 PID: 241 Comm: modprobe Not tainted 4.7.0-rc4-next-20160624 #2 12.562867] Hardware name: Generic DRA74X (Flattened Device Tree) 12.562872] task: ed51f140 ti: ed44c000 task.ti: ed44c000 12.562886] PC is at omap4_rng_init+0x20/0x84 [omap_rng] 12.562899] LR is at set_current_rng+0xc0/0x154 [rng_core] [...] After the proper checks: [ 94.366705] omap_rng 48090000.rng: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info [ 94.375767] omap_rng 48090000.rng: Failed to runtime_get device -19 [ 94.382351] omap_rng 48090000.rng: initialization failed. Fixes: 665d92fa ("hwrng: OMAP: convert to use runtime PM") Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Russell King authored
commit 06dfe5cc upstream. SA1111 PCMCIA was broken when PCMCIA switched to using dev_pm_ops for the PCMCIA socket class. PCMCIA used to handle suspend/resume via the socket hosting device, which happened at normal device suspend/resume time. However, the referenced commit changed this: much of the resume now happens much earlier, in the noirq resume handler of dev_pm_ops. However, on SA1111, the PCMCIA device is not accessible as the SA1111 has not been resumed at _noirq time. It's slightly worse than that, because the SA1111 has already been put to sleep at _noirq time, so suspend doesn't work properly. Fix this by converting the core SA1111 code to use dev_pm_ops as well, and performing its own suspend/resume at noirq time. This fixes these errors in the kernel log: pcmcia_socket pcmcia_socket0: time out after reset pcmcia_socket pcmcia_socket1: time out after reset and the resulting lack of PCMCIA cards after a S2RAM cycle. Fixes: d7646f76 ("pcmcia: use dev_pm_ops for class pcmcia_socket_class") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Wolfram Sang authored
commit c2f32112 upstream. The current implementation only works if the da9xxx devices are added before their drivers are registered. Only then it can apply the fixes to both devices. Otherwise, the driver for the first device gets probed before the fix for the second device can be applied. This is what fails when using the IP core switcher or when having the i2c master driver as a module. So, we need to disable both da9xxx once we detected one of them. We now use i2c_transfer with hardcoded i2c_messages and device addresses, so we don't need the da9xxx client devices to be instantiated. Because the fixup is used on specific boards only, the addresses are not going to change. Fixes: 663fbb52 ("ARM: shmobile: R-Car Gen2: Add da9063/da9210 regulator quirk") Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> (r8a7791/koelsch) Tested-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Russell King authored
commit da60626e upstream. Clear the current reset status prior to rebooting the platform. This adds the bit missing from 04fef228 ("[ARM] pxa: introduce reset_status and clear_reset_status for driver's usage"). Fixes: 04fef228 ("[ARM] pxa: introduce reset_status and clear_reset_status for driver's usage") Signed-off-by:
-
Russell King authored
commit 02ba38a5 upstream. pxa_timer wants to be able to call clk_enable() etc on this clock, but our clk_enable() implementation expects non-NULL enable/disable operations. Provide these dummy implementations. Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0204000 [00000000] *pgd=00000000 Internal error: Oops: 80000005 [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.8.0-rc2+ #887 Hardware name: Intel-Assabet task: c0644590 task.stack: c0640000 PC is at 0x0 LR is at clk_enable+0x40/0x58 pc : [<00000000>] lr : [<c021b178>] psr: 600000d3 sp : c0641f60 ip : c0641f4c fp : c0641f74 r10: c1ffc7a0 r9 : 6901b118 r8 : 00000001 r7 : c0639a34 r6 : 0000001b r5 : a00000d3 r4 : c0645d70 r3 : c0645d78 r2 : 00000001 r1 : c0641ef0 r0 : c0645d70 Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: c020717f Table: c020717f DAC: 00000053 Process swapper (pid: 0, stack limit = 0xc0640188) Stack: (0xc0641f60 to 0xc0642000) 1f60: 00384000 c08762e4 c0641f98 c0641f78 c063308c c021b144 00000000 00000000 1f80: 00000000 c0660b20 ffffffff c0641fa8 c0641f9c c06220ec c0633058 c0641fb8 1fa0: c0641fac c061f114 c06220dc c0641ff4 c0641fbc c061bb68 c061f0fc ffffffff 1fc0: ffffffff 00000000 c061b6cc c0639a34 c0660cd4 c0642038 c0639a30 c0645434 1fe0: c0204000 c06380f8 00000000 c0641ff8 c0208048 c061b954 00000000 00000000 Backtrace: [<c021b138>] (clk_enable) from [<c063308c>] (pxa_timer_nodt_init+0x40/0x120) r5:c08762e4 r4:00384000 [<c063304c>] (pxa_timer_nodt_init) from [<c06220ec>] (sa1100_timer_init+0x1c/0x20) r6:ffffffff r5:c0660b20 r4:00000000 [<c06220d0>] (sa1100_timer_init) from [<c061f114>] (time_init+0x24/0x2c) [<c061f0f0>] (time_init) from [<c061bb68>] (start_kernel+0x220/0x42c) [<c061b948>] (start_kernel) from [<c0208048>] (0xc0208048) r10:c06380f8 r8:c0204000 r7:c0645434 r6:c0639a30 r5:c0642038 r4:c0660cd4 Code: bad PC value ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Attempted to kill the idle task! Fixes: ee3a4020 ("ARM: 8250/1: sa1100: provide OSTIMER0 clock for pxa_timer") Acked-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by:
-
Russell King authored
commit 198b51e8 upstream. Since we switched to use pxa_timer, we need to provide the OSTIMER0 clock. However, as the clock is initialised early, we need to provide the clock early as well, so that pxa_timer can find it. Adding the clock to the clkdev table at core_initcall() time is way too late. Move the initialisation earlier. Fixes: ee3a4020 ("ARM: 8250/1: sa1100: provide OSTIMER0 clock for pxa_timer") Acked-by:
-
Hugo Grostabussiat authored
commit 539d5c48 upstream. Set cpu_alert0 temperature to 85°C instead of 850°C. Fixes: 32a5d2d1 ("ARM: dts: sun5i: Add cpu thermal zones to dtsi") Signed-off-by:
Hugo Grostabussiat <bonstra@bonstra.fr.eu.org> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Stephen Boyd authored
commit 29028477 upstream. The voltage ranges listed here are wrong. The correct ranges can be seen in the "native" spmi regulator driver qcom_spmi-regulator.c at pldo_ranges[], ftsmps_ranges[] and boost_ranges[] for the pldo, ftsmps, and boost type regulators. Port these ranges over to the RPM SMD regulator driver so that we list the appropriate set of supported voltages on pldos. Doing this allows us to specify a voltage like 3075000 for l24, whereas before that wasn't a supported voltage. Fixes: da65e367 ("regulator: Regulator driver for the Qualcomm RPM") Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Reviewed-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
-
Stephen Boyd authored
commit 93bfe79b upstream. The mvs1 and mvs2 switches are actually called 5vs1 and 5vs2 on some datasheets. Let's rename them to match the datasheets and also match the RPM based regulator driver which calls these by their 5vs names (see qcom_smd-regulator.c). There aren't any users of these regulators so far, so there aren't any concerns of DT ABI breakage here. While we're here making updates to the switches, also mandate usage of the OCP irq for these switches too. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: e92a4047 ("regulator: Add QCOM SPMI regulator driver") Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
-
Stephen Boyd authored
commit 919163f6 upstream. The voltage switches support mode switching, so add support for these ops to those types of regulators. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: e92a4047 ("regulator: Add QCOM SPMI regulator driver") Signed-off-by:
-
Stephen Boyd authored
commit c333dfe8 upstream. The S4 supply is sometimes called the boost regulator because it outputs 5V. Typically it's connected to the 5vs1 and 5vs2 switches for use in USB OTG and HDMI applications. Add support for this regulator which was mistakenly left out from the initial submission of this driver. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: e92a4047 ("regulator: Add QCOM SPMI regulator driver") Signed-off-by:
-
apronin@chromium.org authored
commit 1b0612b0 upstream. The result must be converted from BE byte order, which is used by the TPM2 protocol. This has not popped out because tpm2_get_tpm_pt() has been only used for probing. Fixes: 7a1d7e6d ("tpm: TPM 2.0 baseline support") Change-Id: I7d71cd379b1a3b7659d20a1b6008216762596590 Signed-off-by:
Andrey Pronin <apronin@chromium.org> Reviewed-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Nicolas Iooss authored
commit ae6c33ba upstream. Commit bbeddf52 ("printk: move braille console support into separate braille.[ch] files") moved the parsing of braille-related options into _braille_console_setup(), changing the type of variable str from char* to char**. In this commit, memcmp(str, "brl,", 4) was correctly updated to memcmp(*str, "brl,", 4) but not memcmp(str, "brl=", 4). Update the code to make "brl=" option work again and replace memcmp() with strncmp() to make the compiler able to detect such an issue. Fixes: bbeddf52 ("printk: move braille console support into separate braille.[ch] files") Link: http://lkml.kernel.org/r/20160823165700.28952-1-nicolas.iooss_linux@m4x.orgSigned-off-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
