RFC 9293 states that in the case of simultaneous connect(), the connection
gets established when SYN+ACK is received. [0]

      TCP Peer A                                       TCP Peer B

  1.  CLOSED                                           CLOSED
  2.  SYN-SENT     --> <SEQ=100><CTL=SYN>              ...
  3.  SYN-RECEIVED <-- <SEQ=300><CTL=SYN>              <-- SYN-SENT
  4.               ... <SEQ=100><CTL=SYN>              --> SYN-RECEIVED
  5.  SYN-RECEIVED --> <SEQ=100><ACK=301><CTL=SYN,ACK> ...
  6.  ESTABLISHED  <-- <SEQ=300><ACK=101><CTL=SYN,ACK> <-- SYN-RECEIVED
  7.               ... <SEQ=100><ACK=301><CTL=SYN,ACK> --> ESTABLISHED

However, since commit 0c24604b ("tcp: implement RFC 5961 4.2"), such a
SYN+ACK is dropped in tcp_validate_incoming() and responded with Challenge
ACK.

For example, the write() syscall in the following packetdrill script fails
with -EAGAIN, and wrong SNMP stats get incremented.

   0 socket(..., SOCK_STREAM|SOCK_NONBLOCK, IPPROTO_TCP) = 3
  +0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress)

  +0 > S  0:0(0) <mss 1460,sackOK,TS val 1000 ecr 0,nop,wscale 8>
  +0 < S  0:0(0) win 1000 <mss 1000>
  +0 > S. 0:0(0) ack 1 <mss 1460,sackOK,TS val 3308134035 ecr 0,nop,wscale 8>
  +0 < S. 0:0(0) ack 1 win 1000

  +0 write(3, ..., 100) = 100
  +0 > P. 1:101(100) ack 1

  --

  # packetdrill cross-synack.pkt
  cross-synack.pkt:13: runtime error in write call: Expected result 100 but got -1 with errno 11 (Resource temporarily unavailable)
  # nstat
  ...
  TcpExtTCPChallengeACK           1                  0.0
  TcpExtTCPSYNChallenge           1                  0.0

The problem is that bpf_skops_established() is triggered by the Challenge
ACK instead of SYN+ACK.  This causes the bpf prog to miss the chance to
check if the peer supports a TCP option that is expected to be exchanged
in SYN and SYN+ACK.

Let's accept a bare SYN+ACK for active-open TCP_SYN_RECV sockets to avoid
such a situation.

Note that tcp_ack_snd_check() in tcp_rcv_state_process() is skipped not to
send an unnecessary ACK, but this could be a bit risky for net.git, so this
targets for net-next.

Link: https://www.rfc-editor.org/rfc/rfc9293.html#section-3.5-7 [0]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240710171246.87533-2-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add install target for vsock to make Yocto easy to install the images.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20240710122728.45044-1-peng.fan@oss.nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Following files are part of TCP stack:

- net/ipv4/inet_connection_sock.c
- net/ipv4/inet_hashtables.c
- net/ipv4/inet_timewait_sock.c
- net/ipv6/inet6_connection_sock.c
- net/ipv6/inet6_hashtables.c
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240712234213.3178593-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
idpf: XDP chapter I: convert Rx to libeth

Alexander Lobakin says:

XDP for idpf is currently 5 chapters:
* convert Rx to libeth (this);
* convert Tx and stats to libeth;
* generic XDP and XSk code changes, libeth_xdp;
* actual XDP for idpf via libeth_xdp;
* XSk for idpf (^).

Part I does the following:
* splits &idpf_queue into 4 (RQ, SQ, FQ, CQ) and puts them on a diet;
* ensures optimal cacheline placement, strictly asserts CL sizes;
* moves currently unused/dead singleq mode out of line;
* reuses libeth's Rx ptype definitions and helpers;
* uses libeth's Rx buffer management for both header and payload;
* eliminates memcpy()s and coherent DMA uses on hotpath, uses
  napi_build_skb() instead of in-place short skb allocation.

Most idpf patches, except for the queue split, removes more lines
than adds.

Expect far better memory utilization and +5-8% on Rx depending on
the case (+17% on skb XDP_DROP :>).

* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  idpf: use libeth Rx buffer management for payload buffer
  idpf: convert header split mode to libeth + napi_build_skb()
  libeth: support different types of buffers for Rx
  idpf: remove legacy Page Pool Ethtool stats
  idpf: reuse libeth's definitions of parsed ptype structures
  idpf: compile singleq code only under default-n CONFIG_IDPF_SINGLEQ
  idpf: merge singleq and splitq &net_device_ops
  idpf: strictly assert cachelines of queue and queue vector structures
  idpf: avoid bloating &idpf_q_vector with big %NR_CPUS
  idpf: split &idpf_queue into 4 strictly-typed queue structures
  idpf: stop using macros for accessing queue descriptors
  libeth: add cacheline / struct layout assertion helpers
  page_pool: use __cacheline_group_{begin, end}_aligned()
  cache: add __cacheline_group_{begin, end}_aligned() (+ couple more)
====================

Link: https://patch.msgid.link/20240710203031.188081-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf-next 2024-07-12

We've added 23 non-merge commits during the last 3 day(s) which contain
a total of 18 files changed, 234 insertions(+), 243 deletions(-).

The main changes are:

1) Improve BPF verifier by utilizing overflow.h helpers to check
   for overflows, from Shung-Hsi Yu.

2) Fix NULL pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT
   when attr->attach_prog_fd was not specified, from Tengda Wu.

3) Fix arm64 BPF JIT when generating code for BPF trampolines with
   BPF_TRAMP_F_CALL_ORIG which corrupted upper address bits,
   from Puranjay Mohan.

4) Remove test_run callback from lwt_seg6local_prog_ops which never worked
   in the first place and caused syzbot reports,
   from Sebastian Andrzej Siewior.

5) Relax BPF verifier to accept non-zero offset on KF_TRUSTED_ARGS/
   /KF_RCU-typed BPF kfuncs, from Matt Bobrowski.

6) Fix a long standing bug in libbpf with regards to handling of BPF
   skeleton's forward and backward compatibility, from Andrii Nakryiko.

7) Annotate btf_{seq,snprintf}_show functions with __printf,
   from Alan Maguire.

8) BPF selftest improvements to reuse common network helpers in sk_lookup
   test and dropping the open-coded inetaddr_len() and make_socket() ones,
   from Geliang Tang.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (23 commits)
  selftests/bpf: Test for null-pointer-deref bugfix in resolve_prog_type()
  bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT
  selftests/bpf: DENYLIST.aarch64: Skip fexit_sleep again
  bpf: use check_sub_overflow() to check for subtraction overflows
  bpf: use check_add_overflow() to check for addition overflows
  bpf: fix overflow check in adjust_jmp_off()
  bpf: Eliminate remaining "make W=1" warnings in kernel/bpf/btf.o
  bpf: annotate BTF show functions with __printf
  bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG
  selftests/bpf: Close obj in error path in xdp_adjust_tail
  selftests/bpf: Null checks for links in bpf_tcp_ca
  selftests/bpf: Use connect_fd_to_fd in sk_lookup
  selftests/bpf: Use start_server_addr in sk_lookup
  selftests/bpf: Use start_server_str in sk_lookup
  selftests/bpf: Close fd in error path in drop_on_reuseport
  selftests/bpf: Add ASSERT_OK_FD macro
  selftests/bpf: Add backlog for network_helper_opts
  selftests/bpf: fix compilation failure when CONFIG_NF_FLOW_TABLE=m
  bpf: Remove tst_run from lwt_seg6local_prog_ops.
  bpf: relax zero fixed offset constraint on KF_TRUSTED_ARGS/KF_RCU
  ...
====================

Link: https://patch.msgid.link/20240712212448.5378-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

Conflicts:

drivers/net/ethernet/broadcom/bnxt/bnxt.c
  f7ce5eb2 ("bnxt_en: Fix crash in bnxt_get_max_rss_ctx_ring()")
  20c8ad72 ("eth: bnxt: use the RSS context XArray instead of the local list")

Adjacent changes:

net/ethtool/ioctl.c
  503757c8 ("net: ethtool: Fix RSS setting")
  eac9122f ("net: ethtool: record custom RSS contexts in the XArray")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Jakub Kicinski says:

====================
eth: bnxt: use the new RSS API

Convert bnxt from using the set_rxfh API to separate create/modify/remove
callbacks.

Two small extensions to the core APIs are necessary:
 - the ability to discard contexts if for some catastrophic reasons
   device can no longer provide them;
 - the ability to reserve space in the context for RSS table growth.

The driver is adjusted to store indirection tables on u32 to make
it easier to use core structs directly.

With that out of the way the conversion is fairly straightforward.

Since the opposition to discarding contexts was relatively mild
and its what bnxt does already, I'm sticking to that. We may very
well need to revisit that at a later time.

v1: https://lore.kernel.org/all/20240702234757.4188344-1-kuba@kernel.org/
====================

Link: https://patch.msgid.link/20240711220713.283778-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of allocating a separate indir table in the vnic use
the one already present in the RSS context allocated by the core.
This saves some LoC and also we won't have to worry about syncing
the local version back to the core, once core learns how to dump
contexts.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-12-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Ethtool core stores indirection table with u32 entries, "just to be safe".
Switch the type in the driver, so that it's easier to swap local tables
for the core ones. Memory allocations already use sizeof(*entry), switch
the memset()s as well.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-11-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

bnxt allocates tables of max size, and changes the used size
based on number of active rings. The unused entries get padded
out with zeros. bnxt_modify_rss() seems to always pad out
the table of the main / default RSS context, instead of
the table of the modified context.

I haven't observed any behavior change due to this patch,
so I don't think it's a fix. Not entirely sure what role
the padding plays, 0 is a valid queue ID.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-10-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Core already maintains all RSS contexts in an XArray, no need
to keep a second list in the driver.

Remove bnxt_get_max_rss_ctx_ring() completely since core performs
the same check already.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-9-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Core can allocate space for per-context driver-private data,
use it for struct bnxt_rss_ctx. Inline bnxt_alloc_rss_ctx()
at this point, most of the init (as in the actions bnxt_del_one_rss_ctx()
will undo) is open coded in bnxt_create_rxfh_context(), anyway.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-8-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

New RSS context API removes old contexts on netdev unregister.
No need to wipe them manually.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-7-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Core will allocate IDs for the driver, from the range
[1, BNXT_MAX_ETH_RSS_CTX], no need to track the allocations.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-6-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use the new ethtool ops for RSS context management. The conversion
is pretty straightforward cut / paste of the right chunks of the
combined handler. Main change is that we let the core pick the IDs
(bitmap will be removed separately for ease of review), so we need
to tell the core when we lose a context.
Since the new API passes rxfh as const, change bnxt_modify_rss()
to also take const.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-5-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Contexts get deleted from FW when the device is down, but they
are kept in SW and re-added back on open. bnxt_set_rxfh_context()
apparently does not want to deal with complexity of dealing with
both the device down and device up cases. This is perhaps acceptable
for creating new contexts, but not being able to delete contexts
makes core-driven cleanups messy. Specifically with the new RSS
API core will try to delete contexts automatically after bringing
the device down.

Support the delete-while-down case. Skip the FW logic and delete
just the driver state.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-4-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Some drivers (bnxt but I think also mlx5 from ML discussions) change
the size of the indirection table depending on the number of Rx rings.
Decouple the max table size from the size of the currently used table,
so that we can reserve space in the context for table growth.

Static members in ethtool_ops are good enough for now, we can add
callbacks to read the max size more dynamically if someone needs
that.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-3-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

RSS contexts may get lost from a device, in various extreme circumstances.
Specifically if the firmware leaks resources and resets, or crashes and
either recovers in partially working state or the crash causes a
different FW version to run - creating the context again may fail.

Drivers should do their absolute best to prevent this from happening.
When it does, however, telling user that a context exists, when it can't
possibly be used any more is counter productive. Add a helper for
drivers to discard contexts. Print an error, in the future netlink
notification will also be sent.

More robust approaches were proposed, like keeping the contexts
but marking them as "dead" (but possibly resurrected by next reset).
That may be better but it's unclear at this stage whether the
effort is worth the benefits.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-2-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull more networking fixes from Jakub Kicinski:
 "A quick follow up to yesterday's pull. We got a regressions report for
  the bnxt patch as soon as it got to your tree. The ethtool fix is also
  good to have, although it's an older regression.

  Current release - regressions:

   - eth: bnxt_en: fix crash in bnxt_get_max_rss_ctx_ring() on older HW
     when user tries to decrease the ring count

  Previous releases - regressions:

   - ethtool: fix RSS setting, accept "no change" setting if the driver
     doesn't support the new features

   - eth: i40e: remove needless retries of NVM update, don't wait 20min
     when we know the firmware update won't succeed"

* tag 'net-6.10-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net:
  bnxt_en: Fix crash in bnxt_get_max_rss_ctx_ring()
  octeontx2-af: fix issue with IPv4 match for RSS
  octeontx2-af: fix issue with IPv6 ext match for RSS
  octeontx2-af: fix detection of IP layer
  octeontx2-af: fix a issue with cpt_lf_alloc mailbox
  octeontx2-af: replace cpt slot with lf id on reg write
  i40e: fix: remove needless retries of NVM update
  net: ethtool: Fix RSS setting

On older chips not supporting multiple RSS contexts, reducing
ethtool channels will crash:

BUG: kernel NULL pointer dereference, address: 00000000000000b8
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 7032 Comm: ethtool Tainted: G S                 6.10.0-rc4 #1
Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017
RIP: 0010:bnxt_get_max_rss_ctx_ring+0x4c/0x90 [bnxt_en]
Code: c3 d3 eb 4c 8b 83 38 01 00 00 48 8d bb 38 01 00 00 4c 39 c7 74 42 41 8d 54 24 ff 31 c0 0f b7 d2 4c 8d 4c 12 02 66 85 ed 74 1d <49> 8b 90 b8 00 00 00 49 8d 34 11 0f b7 0a 66 39 c8 0f 42 c1 48 83
RSP: 0018:ffffaaa501d23ba8 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff8efdf600c940 RCX: 0000000000000000
RDX: 000000000000007f RSI: ffffffffacf429c4 RDI: ffff8efdf600ca78
RBP: 0000000000000080 R08: 0000000000000000 R09: 0000000000000100
R10: 0000000000000001 R11: ffffaaa501d238c0 R12: 0000000000000080
R13: 0000000000000000 R14: ffff8efdf600c000 R15: 0000000000000006
FS:  00007f977a7d2740(0000) GS:ffff8f041f840000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000b8 CR3: 00000002320aa004 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die_body+0x15/0x60
? page_fault_oops+0x157/0x440
? do_user_addr_fault+0x60/0x770
? _raw_spin_lock_irqsave+0x12/0x40
? exc_page_fault+0x61/0x120
? asm_exc_page_fault+0x22/0x30
? bnxt_get_max_rss_ctx_ring+0x4c/0x90 [bnxt_en]
? bnxt_get_max_rss_ctx_ring+0x25/0x90 [bnxt_en]
bnxt_set_channels+0x9d/0x340 [bnxt_en]
ethtool_set_channels+0x14b/0x210
__dev_ethtool+0xdf8/0x2890
? preempt_count_add+0x6a/0xa0
? percpu_counter_add_batch+0x23/0x90
? filemap_map_pages+0x417/0x4a0
? avc_has_extended_perms+0x185/0x420
? __pfx_udp_ioctl+0x10/0x10
? sk_ioctl+0x55/0xf0
? kmalloc_trace_noprof+0xe0/0x210
? dev_ethtool+0x54/0x170
dev_ethtool+0xa2/0x170
dev_ioctl+0xbe/0x530
sock_do_ioctl+0xa3/0xf0
sock_ioctl+0x20d/0x2e0

bp->rss_ctx_list is not initialized if the chip or firmware does not
support multiple RSS contexts.  Fix it by adding a check in
bnxt_get_max_rss_ctx_ring() before proceeding to reference
bp->rss_ctx_list.

Fixes: 0d1b7d6c ("bnxt: fix crashes when reducing ring count with active RSS contexts")
Reported-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/netdev/ZpFEJeNpwxW1aW9k@gmail.com/Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240712175318.166811-1-michael.chan@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This test verifies that resolve_prog_type() works as expected when
`attach_prog_fd` is not passed in.

`prog->aux->dst_prog` in resolve_prog_type() is assigned by
`attach_prog_fd`, and would be NULL if `attach_prog_fd` is not provided.

Loading EXT prog with bpf_dynptr_from_skb() kfunc call in this way will
lead to null-pointer-deref.

Verify that the null-pointer-deref bug in resolve_prog_type() is fixed.
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240711145819.254178-3-wutengda@huaweicloud.com

When loading a EXT program without specifying `attr->attach_prog_fd`,
the `prog->aux->dst_prog` will be null. At this time, calling
resolve_prog_type() anywhere will result in a null pointer dereference.

Example stack trace:

[    8.107863] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
[    8.108262] Mem abort info:
[    8.108384]   ESR = 0x0000000096000004
[    8.108547]   EC = 0x25: DABT (current EL), IL = 32 bits
[    8.108722]   SET = 0, FnV = 0
[    8.108827]   EA = 0, S1PTW = 0
[    8.108939]   FSC = 0x04: level 0 translation fault
[    8.109102] Data abort info:
[    8.109203]   ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[    8.109399]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[    8.109614]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[    8.109836] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101354000
[    8.110011] [0000000000000004] pgd=0000000000000000, p4d=0000000000000000
[    8.112624] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[    8.112783] Modules linked in:
[    8.113120] CPU: 0 PID: 99 Comm: may_access_dire Not tainted 6.10.0-rc3-next-20240613-dirty #1
[    8.113230] Hardware name: linux,dummy-virt (DT)
[    8.113390] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    8.113429] pc : may_access_direct_pkt_data+0x24/0xa0
[    8.113746] lr : add_subprog_and_kfunc+0x634/0x8e8
[    8.113798] sp : ffff80008283b9f0
[    8.113813] x29: ffff80008283b9f0 x28: ffff800082795048 x27: 0000000000000001
[    8.113881] x26: ffff0000c0bb2600 x25: 0000000000000000 x24: 0000000000000000
[    8.113897] x23: ffff0000c1134000 x22: 000000000001864f x21: ffff0000c1138000
[    8.113912] x20: 0000000000000001 x19: ffff0000c12b8000 x18: ffffffffffffffff
[    8.113929] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720
[    8.113944] x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720
[    8.113958] x11: 0720072007200720 x10: 0000000000f9fca4 x9 : ffff80008021f4e4
[    8.113991] x8 : 0101010101010101 x7 : 746f72705f6d656d x6 : 000000001e0e0f5f
[    8.114006] x5 : 000000000001864f x4 : ffff0000c12b8000 x3 : 000000000000001c
[    8.114020] x2 : 0000000000000002 x1 : 0000000000000000 x0 : 0000000000000000
[    8.114126] Call trace:
[    8.114159]  may_access_direct_pkt_data+0x24/0xa0
[    8.114202]  bpf_check+0x3bc/0x28c0
[    8.114214]  bpf_prog_load+0x658/0xa58
[    8.114227]  __sys_bpf+0xc50/0x2250
[    8.114240]  __arm64_sys_bpf+0x28/0x40
[    8.114254]  invoke_syscall.constprop.0+0x54/0xf0
[    8.114273]  do_el0_svc+0x4c/0xd8
[    8.114289]  el0_svc+0x3c/0x140
[    8.114305]  el0t_64_sync_handler+0x134/0x150
[    8.114331]  el0t_64_sync+0x168/0x170
[    8.114477] Code: 7100707f 54000081 f9401c00 f9403800 (b9400403)
[    8.118672] ---[ end trace 0000000000000000 ]---

One way to fix it is by forcing `attach_prog_fd` non-empty when
bpf_prog_load(). But this will lead to `libbpf_probe_bpf_prog_type`
API broken which use verifier log to probe prog type and will log
nothing if we reject invalid EXT prog before bpf_check().

Another way is by adding null check in resolve_prog_type().

The issue was introduced by commit 4a9c7bbe ("bpf: Resolve to
prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT") which wanted
to correct type resolution for BPF_PROG_TYPE_TRACING programs. Before
that, the type resolution of BPF_PROG_TYPE_EXT prog actually follows
the logic below:

  prog->aux->dst_prog ? prog->aux->dst_prog->type : prog->type;

It implies that when EXT program is not yet attached to `dst_prog`,
the prog type should be EXT itself. This code worked fine in the past.
So just keep using it.

Fix this by returning `prog->type` for BPF_PROG_TYPE_EXT if `dst_prog`
is not present in resolve_prog_type().

Fixes: 4a9c7bbe ("bpf: Resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20240711145819.254178-2-wutengda@huaweicloud.com

Pull btrfs fixes from David Sterba:
 "Fix a regression in extent map shrinker behaviour.

  In the past weeks we got reports from users that there are huge
  latency spikes or freezes. This was bisected to newly added shrinker
  of extent maps (it was added to fix a build up of the structures in
  memory).

  I'm assuming that the freezes would happen to many users after release
  so I'd like to get it merged now so it's in 6.10. Although the diff
  size is not small the changes are relatively straightforward, the
  reporters verified the fixes and we did testing on our side.

  The fixes:

   - adjust behaviour under memory pressure and check lock or scheduling
     conditions, bail out if needed

   - synchronize tracking of the scanning progress so inode ranges are
     not skipped or work duplicated

   - do a delayed iput when scanning a root so evicting an inode does
     not slow things down in case of lots of dirty data, also fix
     lockdep warning, a deadlock could happen when writing the dirty
     data would need to start a transaction"

* tag 'for-6.10-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: avoid races when tracking progress for extent map shrinking
  btrfs: stop extent map shrinker if reschedule is needed
  btrfs: use delayed iput during extent map shrinking

Pull ceph fixes from Ilya Dryomov:
 "A fix for a possible use-after-free following "rbd unmap" or "umount"
  marked for stable and two kernel-doc fixups"

* tag 'ceph-for-6.10-rc8' of https://github.com/ceph/ceph-client:
  libceph: fix crush_choose_firstn() kernel-doc warnings
  libceph: suppress crush_choose_indep() kernel-doc warnings
  libceph: fix race between delayed_work() and ceph_monc_stop()

Pull pmdomain fix from Ulf Hansson:

 - qcom: Skip retention level for rpmhpd's

* tag 'pmdomain-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
  pmdomain: qcom: rpmhpd: Skip retention level for Power Domains

Pull MMC host fixes from Ulf Hansson:

 - davinci_mmc: Prevent transmitted data size from exceeding sgm's
   length

 - sdhci: Fix max_seg_size for 64KiB PAGE_SIZE

* tag 'mmc-v6.10-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: davinci_mmc: Prevent transmitted data size from exceeding sgm's length
  mmc: sdhci: Fix max_seg_size for 64KiB PAGE_SIZE

Revert commit 90dc9460 ("selftests/bpf: DENYLIST.aarch64: Remove
fexit_sleep") again. The fix in 19d3c179 ("bpf, arm64: Fix trampoline
for BPF_TRAMP_F_CALL_ORIG") does not address all of the issues and BPF
CI is still hanging and timing out:

   https://github.com/kernel-patches/bpf/actions/runs/9905842936/job/27366435436

   [...]
   #89/11   fexit_bpf2bpf/func_replace_global_func:OK
   #89/12   fexit_bpf2bpf/fentry_to_cgroup_bpf:OK
   #89/13   fexit_bpf2bpf/func_replace_progmap:OK
   #89      fexit_bpf2bpf:OK
   Error: The operation was canceled.

Thus more investigation work & fixing is needed before the test can be put
in place again.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/bpf/20240705145009.32340-1-puranjay@kernel.org

Pull ARM SoC fixes from Arnd Bergmann:
 "Most of these changes are Qualcomm SoC specific and came in just after
  I sent out the last set of fixes. This includes two regression fixes
  for SoC drivers, a defconfig change to ensure the Lenovo X13s is
  usable and 11 changes to DT files to fix regressions and minor
  platform specific issues.

  Tony and Chunyan step back from their respective maintainership roles
  on the omap and unisoc platforms, and Christophe in turn takes over
  maintaining some of the Freescale SoC drivers that he has been taking
  care of in practice already.

  Lastly, there are two trivial fixes for the davinci and sunxi
  platforms"

* tag 'arm-fixes-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: Update FREESCALE SOC DRIVERS and QUICC ENGINE LIBRARY
  MAINTAINERS: Add more maintainers for omaps
  ARM: davinci: Convert comma to semicolon
  MAINTAINERS: Move myself from SPRD Maintainer to Reviewer
  Revert "dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries"
  arm64: dts: qcom: qdu1000: Fix LLCC reg property
  arm64: dts: qcom: sm6115: add iommu for sdhc_1
  arm64: dts: qcom: x1e80100-crd: fix DAI used for headset recording
  arm64: dts: qcom: x1e80100-crd: fix WCD audio codec TX port mapping
  soc: qcom: pmic_glink: disable UCSI on sc8280xp
  arm64: defconfig: enable Elan i2c-hid driver
  arm64: dts: qcom: sc8280xp-crd: use external pull up for touch reset
  arm64: dts: qcom: sc8280xp-x13s: fix touchscreen power on
  arm64: dts: qcom: x1e80100: Fix PCIe 6a reg offsets and add MHI
  arm64: dts: qcom: sa8775p: Correct IRQ number of EL2 non-secure physical timer
  arm64: dts: allwinner: Fix PMIC interrupt number
  arm64: dts: qcom: sc8280xp: Set status = "reserved" on PSHOLD
  arm64: dts: qcom: x1e80100-*: Allocate some CMA buffers
  arm64: dts: qcom: sc8180x: Fix LLCC reg property again

Shung-Hsi Yu says:

====================
Use overflow.h helpers to check for overflows

This patch set refactors kernel/bpf/verifier.c to use type-agnostic, generic
overflow-check helpers defined in include/linux/overflow.h to check for addition
and subtraction overflow, and drop the signed_*_overflows() helpers we currently
have in kernel/bpf/verifier.c; with a fix for overflow check in adjust_jmp_off()
in patch 1.

There should be no functional change in how the verifier works and  the main
motivation is to make future refactoring[1] easier.

While check_mul_overflow() also exists and could potentially replace what
we have in scalar*_min_max_mul(), it does not help with refactoring and
would either change how the verifier works (e.g. lifting restriction on
umax<=U32_MAX and u32_max<=U16_MAX) or make the code slightly harder to
read, so it is left for future endeavour.

Changes from v2 <https://lore.kernel.org/r/20240701055907.82481-1-shung-hsi.yu@suse.com>
- add fix for 5337ac4c ("bpf: Fix the corner case with may_goto and jump to
  the 1st insn.") to correct the overflow check for general jump instructions
- adapt to changes in commit 5337ac4c ("bpf: Fix the corner case with
  may_goto and jump to the 1st insn.")
  - refactor in adjust_jmp_off() as well and remove signed_add16_overflow()

Changes from v1 <https://lore.kernel.org/r/20240623070324.12634-1-shung-hsi.yu@suse.com>:
- use pointers to values in dst_reg directly as the sum/diff pointer and
  remove the else branch (Jiri)
- change local variables to be dst_reg pointers instead of src_reg values
- include comparison of generated assembly before & after the change
  (Alexei)

1: https://github.com/kernel-patches/bpf/pull/7205/commits
====================

Link: https://lore.kernel.org/r/20240712080127.136608-1-shung-hsi.yu@suse.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Similar to previous patch that drops signed_add*_overflows() and uses
(compiler) builtin-based check_add_overflow(), do the same for
signed_sub*_overflows() and replace them with the generic
check_sub_overflow() to make future refactoring easier and have the
checks implemented more efficiently.

Unsigned overflow check for subtraction does not use helpers and are
simple enough already, so they're left untouched.

After the change GCC 13.3.0 generates cleaner assembly on x86_64:

	if (check_sub_overflow(*dst_smin, src_reg->smax_value, dst_smin) ||
   139bf:	mov    0x28(%r12),%rax
   139c4:	mov    %edx,0x54(%r12)
   139c9:	sub    %r11,%rax
   139cc:	mov    %rax,0x28(%r12)
   139d1:	jo     14627 <adjust_reg_min_max_vals+0x1237>
	    check_sub_overflow(*dst_smax, src_reg->smin_value, dst_smax)) {
   139d7:	mov    0x30(%r12),%rax
   139dc:	sub    %r9,%rax
   139df:	mov    %rax,0x30(%r12)
	if (check_sub_overflow(*dst_smin, src_reg->smax_value, dst_smin) ||
   139e4:	jo     14627 <adjust_reg_min_max_vals+0x1237>
   ...
		*dst_smin = S64_MIN;
   14627:	movabs $0x8000000000000000,%rax
   14631:	mov    %rax,0x28(%r12)
		*dst_smax = S64_MAX;
   14636:	sub    $0x1,%rax
   1463a:	mov    %rax,0x30(%r12)

Before the change it gives:

	if (signed_sub_overflows(dst_reg->smin_value, smax_val) ||
   13a50:	mov    0x28(%r12),%rdi
   13a55:	mov    %edx,0x54(%r12)
		dst_reg->smax_value = S64_MAX;
   13a5a:	movabs $0x7fffffffffffffff,%rdx
   13a64:	mov    %eax,0x50(%r12)
		dst_reg->smin_value = S64_MIN;
   13a69:	movabs $0x8000000000000000,%rax
	s64 res = (s64)((u64)a - (u64)b);
   13a73:	mov    %rdi,%rsi
   13a76:	sub    %rcx,%rsi
	if (b < 0)
   13a79:	test   %rcx,%rcx
   13a7c:	js     145ea <adjust_reg_min_max_vals+0x119a>
	if (signed_sub_overflows(dst_reg->smin_value, smax_val) ||
   13a82:	cmp    %rsi,%rdi
   13a85:	jl     13ac7 <adjust_reg_min_max_vals+0x677>
	    signed_sub_overflows(dst_reg->smax_value, smin_val)) {
   13a87:	mov    0x30(%r12),%r8
	s64 res = (s64)((u64)a - (u64)b);
   13a8c:	mov    %r8,%rax
   13a8f:	sub    %r9,%rax
	return res > a;
   13a92:	cmp    %rax,%r8
   13a95:	setl   %sil
	if (b < 0)
   13a99:	test   %r9,%r9
   13a9c:	js     147d1 <adjust_reg_min_max_vals+0x1381>
		dst_reg->smax_value = S64_MAX;
   13aa2:	movabs $0x7fffffffffffffff,%rdx
		dst_reg->smin_value = S64_MIN;
   13aac:	movabs $0x8000000000000000,%rax
	if (signed_sub_overflows(dst_reg->smin_value, smax_val) ||
   13ab6:	test   %sil,%sil
   13ab9:	jne    13ac7 <adjust_reg_min_max_vals+0x677>
		dst_reg->smin_value -= smax_val;
   13abb:	mov    %rdi,%rax
		dst_reg->smax_value -= smin_val;
   13abe:	mov    %r8,%rdx
		dst_reg->smin_value -= smax_val;
   13ac1:	sub    %rcx,%rax
		dst_reg->smax_value -= smin_val;
   13ac4:	sub    %r9,%rdx
   13ac7:	mov    %rax,0x28(%r12)
   ...
   13ad1:	mov    %rdx,0x30(%r12)
   ...
	if (signed_sub_overflows(dst_reg->smin_value, smax_val) ||
   145ea:	cmp    %rsi,%rdi
   145ed:	jg     13ac7 <adjust_reg_min_max_vals+0x677>
   145f3:	jmp    13a87 <adjust_reg_min_max_vals+0x637>
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240712080127.136608-4-shung-hsi.yu@suse.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

signed_add*_overflows() was added back when there was no overflow-check
helper. With the introduction of such helpers in commit f0907827
("compiler.h: enable builtin overflow checkers and add fallback code"), we
can drop signed_add*_overflows() in kernel/bpf/verifier.c and use the
generic check_add_overflow() instead.

This will make future refactoring easier, and takes advantage of
compiler-emitted hardware instructions that efficiently implement these
checks.

After the change GCC 13.3.0 generates cleaner assembly on x86_64:

	err = adjust_scalar_min_max_vals(env, insn, dst_reg, *src_reg);
   13625:	mov    0x28(%rbx),%r9  /*  r9 = src_reg->smin_value */
   13629:	mov    0x30(%rbx),%rcx /* rcx = src_reg->smax_value */
   ...
	if (check_add_overflow(*dst_smin, src_reg->smin_value, dst_smin) ||
   141c1:	mov    %r9,%rax
   141c4:	add    0x28(%r12),%rax
   141c9:	mov    %rax,0x28(%r12)
   141ce:	jo     146e4 <adjust_reg_min_max_vals+0x1294>
	    check_add_overflow(*dst_smax, src_reg->smax_value, dst_smax)) {
   141d4:	add    0x30(%r12),%rcx
   141d9:	mov    %rcx,0x30(%r12)
	if (check_add_overflow(*dst_smin, src_reg->smin_value, dst_smin) ||
   141de:	jo     146e4 <adjust_reg_min_max_vals+0x1294>
   ...
		*dst_smin = S64_MIN;
   146e4:	movabs $0x8000000000000000,%rax
   146ee:	mov    %rax,0x28(%r12)
		*dst_smax = S64_MAX;
   146f3:	sub    $0x1,%rax
   146f7:	mov    %rax,0x30(%r12)

Before the change it gives:

	s64 smin_val = src_reg->smin_value;
     675:	mov    0x28(%rsi),%r8
	s64 smax_val = src_reg->smax_value;
	u64 umin_val = src_reg->umin_value;
	u64 umax_val = src_reg->umax_value;
     679:	mov    %rdi,%rax /* rax = dst_reg */
	if (signed_add_overflows(dst_reg->smin_value, smin_val) ||
     67c:	mov    0x28(%rdi),%rdi /* rdi = dst_reg->smin_value */
	u64 umin_val = src_reg->umin_value;
     680:	mov    0x38(%rsi),%rdx
	u64 umax_val = src_reg->umax_value;
     684:	mov    0x40(%rsi),%rcx
	s64 res = (s64)((u64)a + (u64)b);
     688:	lea    (%r8,%rdi,1),%r9 /* r9 = dst_reg->smin_value + src_reg->smin_value */
	return res < a;
     68c:	cmp    %r9,%rdi
     68f:	setg   %r10b /* r10b = (dst_reg->smin_value + src_reg->smin_value) > dst_reg->smin_value */
	if (b < 0)
     693:	test   %r8,%r8
     696:	js     72b <scalar_min_max_add+0xbb>
	    signed_add_overflows(dst_reg->smax_value, smax_val)) {
		dst_reg->smin_value = S64_MIN;
		dst_reg->smax_value = S64_MAX;
     69c:	movabs $0x7fffffffffffffff,%rdi
	s64 smax_val = src_reg->smax_value;
     6a6:	mov    0x30(%rsi),%r8
		dst_reg->smin_value = S64_MIN;
     6aa:	00 00 00 	movabs $0x8000000000000000,%rsi
	if (signed_add_overflows(dst_reg->smin_value, smin_val) ||
     6b4:	test   %r10b,%r10b /* (dst_reg->smin_value + src_reg->smin_value) > dst_reg->smin_value ? goto 6cb */
     6b7:	jne    6cb <scalar_min_max_add+0x5b>
	    signed_add_overflows(dst_reg->smax_value, smax_val)) {
     6b9:	mov    0x30(%rax),%r10   /* r10 = dst_reg->smax_value */
	s64 res = (s64)((u64)a + (u64)b);
     6bd:	lea    (%r10,%r8,1),%r11 /* r11 = dst_reg->smax_value + src_reg->smax_value */
	if (b < 0)
     6c1:	test   %r8,%r8
     6c4:	js     71e <scalar_min_max_add+0xae>
	if (signed_add_overflows(dst_reg->smin_value, smin_val) ||
     6c6:	cmp    %r11,%r10 /* (dst_reg->smax_value + src_reg->smax_value) <= dst_reg->smax_value ? goto 723 */
     6c9:	jle    723 <scalar_min_max_add+0xb3>
	} else {
		dst_reg->smin_value += smin_val;
		dst_reg->smax_value += smax_val;
	}
     6cb:	mov    %rsi,0x28(%rax)
     ...
     6d5:	mov    %rdi,0x30(%rax)
     ...
	if (signed_add_overflows(dst_reg->smin_value, smin_val) ||
     71e:	cmp    %r11,%r10
     721:	jl     6cb <scalar_min_max_add+0x5b>
		dst_reg->smin_value += smin_val;
     723:	mov    %r9,%rsi
		dst_reg->smax_value += smax_val;
     726:	mov    %r11,%rdi
     729:	jmp    6cb <scalar_min_max_add+0x5b>
		return res > a;
     72b:	cmp    %r9,%rdi
     72e:	setl   %r10b
     732:	jmp    69c <scalar_min_max_add+0x2c>
     737:	nopw   0x0(%rax,%rax,1)

Note: unlike adjust_ptr_min_max_vals() and scalar*_min_max_add(), it is
necessary to introduce intermediate variable in adjust_jmp_off() to keep
the functional behavior unchanged. Without an intermediate variable
imm/off will be altered even on overflow.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20240712080127.136608-3-shung-hsi.yu@suse.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

adjust_jmp_off() incorrectly used the insn->imm field for all overflow check,
which is incorrect as that should only be done or the BPF_JMP32 | BPF_JA case,
not the general jump instruction case. Fix it by using insn->off for overflow
check in the general case.

Fixes: 5337ac4c ("bpf: Fix the corner case with may_goto and jump to the 1st insn.")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20240712080127.136608-2-shung-hsi.yu@suse.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Pull char / misc driver fixes from Greg KH:
 "Here are some small remaining driver fixes for 6.10-final that have
  all been in linux-next for a while and resolve reported issues.
  Included in here are:

   - mei driver fixes (and a spelling fix at the end just to be clean)

   - iio driver fixes for reported problems

   - fastrpc bugfixes

   - nvmem small fixes"

* tag 'char-misc-6.10-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mei: vsc: Fix spelling error
  mei: vsc: Enhance SPI transfer of IVSC ROM
  mei: vsc: Utilize the appropriate byte order swap function
  mei: vsc: Prevent timeout error with added delay post-firmware download
  mei: vsc: Enhance IVSC chipset stability during warm reboot
  nvmem: core: limit cell sysfs permissions to main attribute ones
  nvmem: core: only change name to fram for current attribute
  nvmem: meson-efuse: Fix return value of nvmem callbacks
  nvmem: rmem: Fix return value of rmem_read()
  misc: microchip: pci1xxxx: Fix return value of nvmem callbacks
  hpet: Support 32-bit userspace
  misc: fastrpc: Restrict untrusted app to attach to privileged PD
  misc: fastrpc: Fix ownership reassignment of remote heap
  misc: fastrpc: Fix memory leak in audio daemon attach operation
  misc: fastrpc: Avoid updating PD type for capability request
  misc: fastrpc: Copy the complete capability structure to user
  misc: fastrpc: Fix DSP capabilities request
  iio: light: apds9306: Fix error handing
  iio: trigger: Fix condition for own trigger

Pull tty / serial fixes from Greg KH:
 "Here are some small serial driver fixes for 6.10-final. Included in
  here are:

   - qcom-geni fixes for a much much much discussed issue and everyone
     now seems to be agreed that this is the proper way forward to
     resolve the reported lockups

   - imx serial driver bugfixes

   - 8250_omap errata fix

   - ma35d1 serial driver bugfix

  All of these have been in linux-next for over a week with no reported
  issues"

* tag 'tty-6.10-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: qcom-geni: do not kill the machine on fifo underrun
  serial: qcom-geni: fix hard lockup on buffer flush
  serial: qcom-geni: fix soft lockup on sw flow control and suspend
  serial: imx: ensure RTS signal is not left active after shutdown
  tty: serial: ma35d1: Add a NULL check for of_node
  serial: 8250_omap: Fix Errata i2310 with RX FIFO level check
  serial: imx: only set receiver level if it is zero

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes and new device ids for
  6.10-final. Included in here are:

   - new usb-serial device ids for reported devices

   - syzbot-triggered duplicate endpoint bugfix

   - gadget bugfix for configfs memory overwrite

   - xhci resume bugfix

   - new device quirk added

   - usb core error path bugfix

  All of these have been in linux-next (most for a while) with no
  reported issues"

* tag 'usb-6.10-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: mos7840: fix crash on resume
  USB: serial: option: add Rolling RW350-GL variants
  USB: serial: option: add support for Foxconn T99W651
  USB: serial: option: add Netprisma LCUK54 series modules
  usb: gadget: configfs: Prevent OOB read/write in usb_string_copy()
  usb: dwc3: pci: add support for the Intel Panther Lake
  usb: core: add missing of_node_put() in usb_of_has_devices_or_graph
  USB: Add USB_QUIRK_NO_SET_INTF quirk for START BP-850k
  USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor
  xhci: always resume roothubs if xHC was reset during resume
  USB: serial: option: add Telit generic core-dump composition
  USB: serial: option: add Fibocom FM350-GL
  USB: serial: option: add Telit FN912 rmnet compositions

Pull sound fixes from Takashi Iwai:
 "The majority of changes here are small device-specific fixes for ASoC
  SOF / Intel and usual HD-audio quirks.

  The only significant high LOC is found in the Cirrus firmware driver,
  but all those are for hardening against malicious firmware blobs, and
  they look fine for taking as a last minute fix, too"

* tag 'sound-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: Enable Mute LED on HP 250 G7
  firmware: cs_dsp: Use strnlen() on name fields in V1 wmfw files
  ALSA: hda/realtek: Limit mic boost on VAIO PRO PX
  ALSA: hda: cs35l41: Fix swapped l/r audio channels for Lenovo ThinBook 13x Gen4
  ASoC: SOF: Intel: hda-pcm: Limit the maximum number of periods by MAX_BDL_ENTRIES
  ASoC: rt711-sdw: add missing readable registers
  ASoC: SOF: Intel: hda: fix null deref on system suspend entry
  ALSA: hda/realtek: add quirk for Clevo V5[46]0TU
  firmware: cs_dsp: Prevent buffer overrun when processing V2 alg headers
  firmware: cs_dsp: Validate payload length before processing block
  firmware: cs_dsp: Return error if block header overflows file
  firmware: cs_dsp: Fix overflow checking of wmfw header

Pull more bcachefs fixes from Kent Overstreet:

 - revert the SLAB_ACCOUNT patch, something crazy is going on in memcg
   and someone forgot to test

 - minor fixes: missing rcu_read_lock(), scheduling while atomic (in an
   emergency shutdown path)

 - two lockdep fixes; these could have gone earlier, but were left to
   bake awhile

* tag 'bcachefs-2024-07-12' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: bch2_gc_btree() should not use btree_root_lock
  bcachefs: Set PF_MEMALLOC_NOFS when trans->locked
  bcachefs; Use trans_unlock_long() when waiting on allocator
  Revert "bcachefs: Mark bch_inode_info as SLAB_ACCOUNT"
  bcachefs: fix scheduling while atomic in break_cycle()
  bcachefs: Fix RCU splat

As reported by Mirsad [1] we still see format warnings in kernel/bpf/btf.o
at W=1 warning level:

  CC      kernel/bpf/btf.o
./kernel/bpf/btf.c: In function ‘btf_type_seq_show_flags’:
./kernel/bpf/btf.c:7553:21: warning: assignment left-hand side might be a candidate for a format attribute [-Wsuggest-attribute=format]
 7553 |         sseq.showfn = btf_seq_show;
      |                     ^
./kernel/bpf/btf.c: In function ‘btf_type_snprintf_show’:
./kernel/bpf/btf.c:7604:31: warning: assignment left-hand side might be a candidate for a format attribute [-Wsuggest-attribute=format]
 7604 |         ssnprintf.show.showfn = btf_snprintf_show;
      |                               ^

Combined with CONFIG_WERROR=y these can halt the build.

The fix (annotating the structure field with __printf())
suggested by Mirsad resolves these. Apologies I missed this last time.
No other W=1 warnings were observed in kernel/bpf after this fix.

[1] https://lore.kernel.org/bpf/92c9d047-f058-400c-9c7d-81d4dc1ef71b@gmail.com/

Fixes: b3470da3 ("bpf: annotate BTF show functions with __printf")
Reported-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Suggested-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240712092859.1390960-1-alan.maguire@oracle.com

Srujana Challa says:

====================
Fixes for CPT and RSS configuration

This series of patches fixes various issues related to CPT
configuration and RSS configuration.

v1->v2:
- Excluded the patch "octeontx2-af: reduce cpt flt interrupt vectors for
  cn10kb" to submit it to net-next.
- Addressed the review comments.

Kiran Kumar K (1):
  octeontx2-af: Fix issue with IPv6 ext match for RSS
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

While performing RSS based on IPv4, packets with
IPv4 options are not being considered. Adding changes
to match both plain IPv4 and IPv4 with option header.

Fixes: 41a7aa7b ("octeontx2-af: NIX Rx flowkey configuration for RSS")
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>