- 30 Jul, 2012 40 commits
-
-
Lad, Prabhakar authored
This patch migrates VPIF display driver to videobuf2 framework. Signed-off-by:
Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by:
Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Lad, Prabhakar authored
This patch migrates VPIF capture driver to videobuf2 framework. Signed-off-by:
-
Manjunath Hadli authored
Size up the memory for the buffers from the buffer pool allocated in board file. Then adjust the reqbuf count depending the available memory. Signed-off-by:
-
Manjunath Hadli authored
Size up the memory for the buffers from the buffer pool allocated in board file. Then adjust the reqbuf count depending the available memory. Signed-off-by:
-
Manjunath Hadli authored
fix setting of data width in config_vpif_params() function, which was wrongly set. Signed-off-by:
-
Manjunath Hadli authored
omap-l138 shares the interrupt between capture and display. Make sure we are able to request for the same irq number by making a shared irq request. Signed-off-by:
-
Manjunath Hadli authored
change the dm646x specific strings in the driver to make them generic across platforms. In this case change all the strings which have a dm646x connotation to vpif which is a platform independent ip. Signed-off-by:
-
Manjunath Hadli authored
As the same interrupt is shared between capture and display devices, sometimes we get isr calls where the interrupt might not genuinely belong to capture or display. Hence, add a condition in the isr to check for interrupt ownership and channel number to make sure we do not service wrong interrupts. Signed-off-by:
-
Lad, Prabhakar authored
from commit a8f3c203 restore the mapping scheme for uncached buffers, which was changed in a common scheme for cached and uncached. This apparently was wrong, and was probably intended only for cached buffers. the fix fixes the crash observed while mapping uncached buffers. Signed-off-by:
Federico Vaga <federico.vaga@gmail.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@kernel.org Signed-off-by:
-
Hans de Goede authored
This driver consists of 2 parts, a generic tea5777 driver and a driver for the Griffin radioSHARK v2 USB radio receiver, which is the only driver using the generic tea5777 for now. This first version only implements FM support, once the the new VIDIOC_ENUM_FREQ_BANDS API is upstream I'll also add AM support. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans Verkuil authored
Commit efbceecd, adds a number of helper functions for ctrl related ioctls to v4l2-ioctl.c, these helpers assume that if file->private_data != NULL, it points to a v4l2_fh, which is only the case for drivers which actually use v4l2_fh. This breaks for example bttv which use the "filedata" pointer for its own uses, and now all the ctrl ioctls try to use whatever its filedata points to as v4l2_fh and think it has a ctrl_handler, leading to: [ 142.499214] BUG: unable to handle kernel NULL pointer dereference at 0000000000000021 [ 142.499270] IP: [<ffffffffa01cb959>] v4l2_queryctrl+0x29/0x230 [videodev] [ 142.514649] [<ffffffffa01c7a77>] v4l_queryctrl+0x47/0x90 [videodev] [ 142.517417] [<ffffffffa01c58b1>] __video_do_ioctl+0x2c1/0x420 [videodev] [ 142.520116] [<ffffffffa01c7ee6>] video_usercopy+0x1a6/0x470 [videodev] ... This patch adds the missing test_bit(V4L2_FL_USES_V4L2_FH, &vfd->flags) tests to the ctrl ioctl helpers v4l2_fh paths, fixing the issues with for example the bttv driver. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans de Goede authored
And document V4L2_CID_AUTOBRIGHTNESS. Signed-off-by:
-
Hans de Goede authored
When the v4l2_device release handler gets called the kobject under vdev->dev has already been released, so we cannot use kobject_name on it (which video_device_node_name does). Signed-off-by:
-
Hans de Goede authored
As it cannot be changed while streaming. Signed-off-by:
-
Hans de Goede authored
These are broken with my test cam and I've been unable to fix them. Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
-
Hans de Goede authored
The konica needs a freaking large time (circa 6.5 seconds) to "boot", and does not want to be bothered while doing so, so sleep for 6 seconds, and then query its status register at 100ms intervals until it becomes ready. This removes the "reg_w err: -32" messages shown in dmesg whenever a konica cam gets initialized, and also fixes the camera not working when an app tries to use it directly after it has been plugged in and after a suspend/resume cycle. Signed-off-by:
-
Hans de Goede authored
1) The gspca-core's suspend/resume code is such that resume being called after a reset is safe / ok. 2) All devices tested sofar seem to need the reset_resume callback to work properly over a suspend 3) The USB-core won't call the reset_resume callback for devices which don't need it Thus it seems the simplest and the best to just add the callback to all sub-drivers, rather then adding the callbacks one-by-one as each driver gets tested with suspend/resume. Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
-
Hans de Goede authored
Various gspca-subdrivers have a JPEG quality control which only changes the quantization tables in the JPEG headers send to user-space without making any changes to the settings of the bridge. Remove these bogus / wrong controls. Signed-off-by:
-
Hans Verkuil authored
This ensures the controls are setup correctly. Signed-off-by:
-
Hans Verkuil authored
The v4l2_pix_format priv field must be 0, so zero it. Also disable ioctls that are not implemented by a subdriver. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Changes by Hans de Goede: -rework how gain controls work to better match control framework -make awb + gain + red/blue-balance a single auto-cluster -only add the HFLIP control for TAS5130a sensor cams, as it breaks the video on other cams Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
