- 14 Jun, 2024 4 commits
-
-
Athira Rajeev authored
perf bench futex fails as below and hangs intermittently when attempted to run on on a powerpc system: ./perf bench futex wake-parallel Running 'futex/wake-parallel' benchmark: Run summary [PID 88588]: blocking on 640 threads (at [private] futex 0x10464b8c), 640 threads waking up 1 at a time. [Run 1]: Avg per-thread latency (waking 1/640 threads) in 0.1309 ms (+-53.27%) [Run 2]: Avg per-thread latency (waking 1/640 threads) in 0.0120 ms (+-31.16%) [Run 3]: Avg per-thread latency (waking 1/640 threads) in 0.1474 ms (+-92.47%) [Run 4]: Avg per-thread latency (waking 1/640 threads) in 0.2883 ms (+-67.75%) [Run 5]: Avg per-thread latency (waking 1/640 threads) in 0.4108 ms (+-39.60%) [Run 6]: Avg per-thread latency (waking 1/640 threads) in 0.7843 ms (+-78.98%) perf: couldn't wakeup all tasks (0/1) perf: couldn't wakeup all tasks (0/1) perf: couldn't wakeup all tasks (0/1) perf: couldn't wakeup all tasks (0/1) perf: couldn't wakeup all tasks (0/1) perf: couldn't wakeup all tasks (0/1) In the system, where perf bench wake-up-parallel is has system configuration of 640 cpus. After debugging, this turned out to be a timing issue. The benchmark creates threads equal to number of cpus and issues a futex_wait. Then it does a usleep for .1 second before initiating futex_wake. In system configuration with more threads, the usleep time is not enough. Patch changes the usleep from 100000 to 200000 With the patch, ran multiple iterations and there were no issues further seen Reported-by:
Disha Goel <disgoel@linux.vnet.ibm.com> Signed-off-by:
Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by:
Ian Rogers <irogers@google.com> Tested-by:
Disha Goel <disgoel@linux.ibm.com> Cc: akanksha@linux.ibm.com Cc: kjain@linux.ibm.com Cc: maddy@linux.ibm.com Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240607044354.82225-3-atrajeev@linux.vnet.ibm.com
-
Athira Rajeev authored
Perf bench epoll fails as below when attempted to run on on a powerpc system: ./perf bench epoll wait Running 'epoll/wait' benchmark: Run summary [PID 627653]: 79 threads monitoring on 64 file-descriptors for 8 secs. perf: pthread_create: No such file or directory In the setup where this perf bench was ran, difference was that partition had 640 CPU's, but not all CPUs were online. 80 CPUs were online. While creating threads and using epoll_wait , code sets the affinity using cpumask. The cpumask size used is 80 which is picked from "nrcpus = perf_cpu_map__nr(cpu)". Here the benchmark reports fail while setting affinity for cpu number which is greater than 80 or higher, because it attempts to set a bit position which is not allocated on the cpumask. Fix this by changing the size of cpumask to number of possible cpus and not the number of online cpus. Signed-off-by:
-
Athira Rajeev authored
Perf bench futex fails as below when attempted to run on on a powerpc system: ./perf bench futex all Running futex/hash benchmark... Run summary [PID 626307]: 80 threads, each operating on 1024 [private] futexes for 10 secs. perf: pthread_create: No such file or directory In the setup where this perf bench was ran, difference was that partition had 640 CPU's, but not all CPUs were online. 80 CPUs were online. While blocking the threads with futex_wait, code sets the affinity using cpumask. The cpumask size used is 80 which is picked from "nrcpus = perf_cpu_map__nr(cpu)". Here the benchmark reports fail while setting affinity for cpu number which is greater than 80 or higher, because it attempts to set a bit position which is not allocated on the cpumask. Fix this by changing the size of cpumask to number of possible cpus and not the number of online cpus. Signed-off-by:
-
Ian Rogers authored
Previous allocation didn't account for sample ID written after the lost samples event. Switch from malloc/free to a stack allocation. Reported-by:
Milian Wolff <milian.wolff@kdab.com> Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/Signed-off-by:
-
- 10 Jun, 2024 1 commit
-
-
Ian Rogers authored
Tool events unnecessarily open a dummy perf event which is useless even with `perf record` which will still open a dummy event. Change the behavior of tool events so: - duration_time - call `rdclock` on open and then report the count as a delta since the start in evsel__read_counter. This moves code out of builtin-stat making it more general purpose. - user_time/system_time - open the fd as either `/proc/pid/stat` or `/proc/stat` for cases like system wide. evsel__read_counter will read the appropriate field out of the procfs file. These values were previously supplied by wait4, if the procfs read fails then the wait4 values are used, assuming the process/thread terminated. By reading user_time and system_time this way, interval mode, per PID and per CPU can be supported although there are restrictions given what the files provide (e.g. per PID can't be combined with per CPU). Opening any of the tool events for `perf record` is changed to return invalid. Signed-off-by:
Weilin Wang <weilin.wang@intel.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: James Clark <james.clark@arm.com> Cc: Dmitrii Dolgov <9erthalion6@gmail.com> Cc: Ze Gao <zegao2021@gmail.com> Cc: Song Liu <song@kernel.org> Cc: Leo Yan <leo.yan@linux.dev> Signed-off-by:
-
- 07 Jun, 2024 7 commits
-
-
Thomas Richter authored
On some s390 linux machine (mostly older models) and with debug packages installed, the test case 'perf annotate basic tests' runs for some longer time. Speed up the test and save the output of command perf annotate in a temporary file. This is used to perform pattern matching via grep command. This saves on invocation of perf annotate which runs for some time. Output before: # time bash -x tests/shell/annotate.sh >/dev/null 2>&1; echo EXIT CODE $? real 4m35.543s user 3m19.442s sys 1m14.322s EXIT CODE 0 # Output after: # time bash -x tests/shell/annotate.sh >/dev/null 2>&1; echo EXIT CODE $? real 2m2.881s user 1m30.980s sys 0m30.684s EXIT CODE 0 # Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Acked-by:
-
Ian Rogers authored
When multiple aggregation options are passed to perf stat the behavior isn't clear. Consider "perf stat -A --per-socket .." and "perf stat --per-socket -A ..", the first won't aggregate at all while the second will do per-socket aggregation, even though the same options were passed. Rather than set an enum value, gather the options in a struct and process them from most to least aggregate. This ensures the least aggregate option always applies, so no aggregation if "-A" is passed. Signed-off-by:
-
Ian Rogers authored
Reduce the scope of stat_options to cmd_stat, and pass as an argument to __cmd_record. This is done to make more localized changes to the options in later patches. A side-effect of the change is to reduce the size of a stripped PIE perf binary by 5952 bytes. The savings come mainly in the dynamic relocation section. Signed-off-by:
-
Ian Rogers authored
Data may have lots of overlapping mmaps. The regular insert adds at the end and relies on a later sort. For data with overlapping mappings the sort will happen during a subsequent maps__find or __maps__fixup_overlap_and_insert, there's never a period where the inserted maps buffer up and a single sort happens. To avoid back to back sorts, maintain the sort order when fixing up and inserting. Previously the first_ending_after search was O(log n) where n is the size of maps, and the insert was O(1) but because of the continuous sorting was becoming O(n*log(n)). With maintaining sort order, the insert now becomes O(n) for a memmove. For a perf report on a perf.data file containing overlapping mappings the time numbers are: Before: real 0m5.894s user 0m5.650s sys 0m0.231s After: real 0m0.675s user 0m0.454s sys 0m0.196s Signed-off-by:
James Clark <james.clark@arm.com> Cc: Steinar H . Gunderson <sesse@google.com> Signed-off-by:
-
Ian Rogers authored
When an 'after' map is generated the 'new' map must be before it so terminate iterating and don't resort. If the entry 'pos' is entirely overlapped by the 'new' mapping then don't remove and insert the mapping, just replace - again to remove sorting. For a perf report on a perf.data file containing overlapping mappings the time numbers are: Before: real 0m9.856s user 0m9.637s sys 0m0.204s After: real 0m5.894s user 0m5.650s sys 0m0.231s Signed-off-by:
-
Ian Rogers authored
In the case 'before' and 'after' are broken out from pos, maps_by_address may be changed by __maps__insert, as such it needs re-reading. Don't ignore the return value from __maps_insert. Fixes: 659ad349 ("perf maps: Switch from rbtree to lazily sorted array for addresses") Signed-off-by:
-
Lucas Stach authored
dd1b5278 ("net: add location to trace_consume_skb()") added a new parameter to the consume_skb tracepoint. Adapt the script to match. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Acked-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: kernel@pengutronix.de Cc: patchwork-lst@pengutronix.de Signed-off-by:
-
- 06 Jun, 2024 1 commit
-
-
Clément Le Goffic authored
Compiling perf tool with 'DEBUG_PARSER=1' leads to errors: $> make -C tools/perf PARSER_DEBUG=1 NO_LIBTRACEEVENT=1 ... CC util/expr-flex.o CC util/expr.o util/parse-events.c:33:12: error: redundant redeclaration of ‘parse_events_debug’ [-Werror=redundant-decls] 33 | extern int parse_events_debug; | ^~~~~~~~~~~~~~~~~~ In file included from util/parse-events.c:18: util/parse-events-bison.h:43:12: note: previous declaration of ‘parse_events_debug’ with type ‘int’ 43 | extern int parse_events_debug; | ^~~~~~~~~~~~~~~~~~ util/expr.c:27:12: error: redundant redeclaration of ‘expr_debug’ [-Werror=redundant-decls] 27 | extern int expr_debug; | ^~~~~~~~~~ In file included from util/expr.c:11: util/expr-bison.h:43:12: note: previous declaration of ‘expr_debug’ with type ‘int’ 43 | extern int expr_debug; | ^~~~~~~~~~ cc-1: all warnings being treated as errors Remove extern declaration from the parse-envents.c file as there is a conflict with the ones generated using bison and yacc tools from the file parse-events.[ly]. Signed-off-by:Clément Le Goffic <clement.legoffic@foss.st.com> Reviewed-by:
-
- 05 Jun, 2024 1 commit
-
-
Dr. David Alan Gilbert authored
'hisi_ptt_queue' has been unused since the original commit 5e91e57e ("perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet"). Remove it. Signed-off-by:
Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by:
-
- 04 Jun, 2024 2 commits
-
-
Dr. David Alan Gilbert authored
'options' has been unused since commit fa7f7e73 ("perf jit: Move test functionality in to a test"). Remove it. Signed-off-by:
-
Nick Forrington authored
Change "perf lock info" argument handling to: Display both map and thread info (rather than an error) when neither are specified. Display both map and thread info (rather than just thread info) when both are requested. Signed-off-by:
Nick Forrington <nick.forrington@arm.com> Signed-off-by:
-
- 30 May, 2024 6 commits
-
-
Ian Rogers authored
Allow filters to be added to perf top events. One use is to workaround issues with: ``` $ perf top --uid="$(id -u)" ``` which tries to scan /proc find processes belonging to the uid and can fail in such a pid terminates between the scan and the perf_event_open reporting: ``` Error: The sys_perf_event_open() syscall returned with 3 (No such process) for event (cycles:P). /bin/dmesg | grep -i perf may provide additional information. ``` A similar filter: ``` $ perf top -e cycles:P --filter "uid == $(id -u)" ``` doesn't fail this way. Signed-off-by:
-
Ian Rogers authored
Allow the BPF filter to use the uid and gid terms determined by the bpf_get_current_uid_gid BPF helper. For example, the following will record the cpu-clock event system wide discarding samples that don't belong to the current user. $ perf record -e cpu-clock --filter "uid == $(id -u)" -a sleep 0.1 Signed-off-by:
-
Ian Rogers authored
Give the term types their own enum so that additional terms can be added that don't correspond to a PERF_SAMPLE_xx flag. The term values are numerically ascending rather than bit field positions, this means they need translating to a PERF_SAMPLE_xx bit field in certain places using a shift. Signed-off-by:
-
Ian Rogers authored
In general a read fills 4kb so filling the buffer is a 1 in 4096 operation, move it out of the io__get_char function to avoid some checking overhead and to better hint the function is good to inline. For perf's IO intensive internal (non-rigorous) benchmarks there's a small improvement to kallsyms-parsing with a default build. Before: ``` $ perf bench internals all Computing performance of single threaded perf event synthesis by synthesizing events on the perf process itself: Average synthesis took: 146.322 usec (+- 0.305 usec) Average num. events: 61.000 (+- 0.000) Average time per event 2.399 usec Average data synthesis took: 145.056 usec (+- 0.155 usec) Average num. events: 329.000 (+- 0.000) Average time per event 0.441 usec Average kallsyms__parse took: 162.313 ms (+- 0.599 ms) ... Computing performance of sysfs PMU event scan for 100 times Average core PMU scanning took: 53.720 usec (+- 7.823 usec) Average PMU scanning took: 375.145 usec (+- 23.974 usec) ``` After: ``` $ perf bench internals all Computing performance of single threaded perf event synthesis by synthesizing events on the perf process itself: Average synthesis took: 127.829 usec (+- 0.079 usec) Average num. events: 61.000 (+- 0.000) Average time per event 2.096 usec Average data synthesis took: 133.652 usec (+- 0.101 usec) Average num. events: 327.000 (+- 0.000) Average time per event 0.409 usec Average kallsyms__parse took: 150.415 ms (+- 0.313 ms) ... Computing performance of sysfs PMU event scan for 100 times Average core PMU scanning took: 47.790 usec (+- 1.178 usec) Average PMU scanning took: 376.945 usec (+- 23.683 usec) ``` Signed-off-by:
-
Changbin Du authored
PROT_NONE is also useful information, so do not omit the mmap prot even though it is 0. syscall_arg__scnprintf_mmap_prot() could print PROT_NONE for prot 0. Before: PROT_NONE is not shown. $ sudo perf trace -e syscalls:sys_enter_mmap --filter prot==0 -- ls 0.000 ls/2979231 syscalls:sys_enter_mmap(len: 4220888, flags: PRIVATE|ANONYMOUS) After: PROT_NONE is displayed. $ sudo perf trace -e syscalls:sys_enter_mmap --filter prot==0 -- ls 0.000 ls/2975708 syscalls:sys_enter_mmap(len: 4220888, prot: NONE, flags: PRIVATE|ANONYMOUS) Signed-off-by:Changbin Du <changbin.du@huawei.com> Signed-off-by:
-
Changbin Du authored
For some parameters, it is best to also display them when they are 0, e.g. flags. Here we only check the show_zero property and let arg printer handle special cases. Signed-off-by:
-
- 29 May, 2024 1 commit
-
-
Ian Rogers authored
Assorted typo fixes. Signed-off-by:
-
- 28 May, 2024 4 commits
-
-
Breno Leitao authored
Currently, the --no-desc option in perf list isn't functioning as intended. This issue arises from the overwriting of struct option->desc with the opposite value of struct option->long_desc. Consequently, whatever parse_options() returns at struct option->desc gets overridden later, rendering the --desc or --no-desc arguments ineffective. To resolve this, set ->desc as true by default and allow parse_options() to adjust it accordingly. This adjustment will fix the --no-desc option while preserving the functionality of the other parameters. Signed-off-by:
Breno Leitao <leitao@debian.org> Reviewed-by:
-
Ian Rogers authored
Use get_unaligned_leXX instead of leXX_to_cpu to handle unaligned pointers. Such pointers occur with libFuzzer testing. A similar change for intel-pt was done in: https://lore.kernel.org/r/20231005190451.175568-6-adrian.hunter@intel.comSigned-off-by:
-
Ian Rogers authored
Test behavior of PMU names and comparisons wrt suffixes using Intel uncore_cha, marvell mrvl_ddr_pmu and S390's cpum_cf as examples. Signed-off-by:
-
Ian Rogers authored
The mrvl_ddr_pmu is uncore and has a hexadecimal address suffix while the previous PMU sorting/merging code assumes uncore PMU names start with uncore_ and have a decimal suffix. Because of the previous assumption it isn't possible to wildcard the mrvl_ddr_pmu. Modify pmu_name_len_no_suffix but also remove the suffix number out argument, this is because we don't know if a suffix number of say 100 is in hexadecimal or decimal. As the only use of the suffix number is in comparisons, it is safe there to compare the values as hexadecimal. Modify perf_pmu__match_ignoring_suffix so that hexadecimal suffixes are ignored. Only allow hexadecimal suffixes to be greater than length 2 (ie 3 or more) so that S390's cpum_cf PMU doesn't lose its suffix. Change the return type of pmu_name_len_no_suffix to size_t to workaround GCC incorrectly determining the result could be negative. Signed-off-by:
-
- 26 May, 2024 5 commits
-
-
Linus Torvalds authored
-
Kent Overstreet authored
percpu.h depends on smp.h, but doesn't include it directly because of circular header dependency issues; percpu.h is needed in a bunch of low level headers. This fixes a randconfig build error on mips: include/linux/alloc_tag.h: In function '__alloc_tag_ref_set': include/asm-generic/percpu.h:31:40: error: implicit declaration of function 'raw_smp_processor_id' [-Werror=implicit-function-declaration] Reported-by:
kernel test robot <lkp@intel.com> Fixes: 24e44cc2 ("mm: percpu: enable per-cpu allocation tagging") Closes: https://lore.kernel.org/oe-kbuild-all/202405210052.DIrMXJNz-lkp@intel.com/Signed-off-by:
Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tool fix from Arnaldo Carvalho de Melo: "Revert a patch causing a regression. This made a simple 'perf record -e cycles:pp make -j199' stop working on the Ampere ARM64 system Linus uses to test ARM64 kernels". * tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"
-
Arnaldo Carvalho de Melo authored
This reverts commit 617824a7. This made a simple 'perf record -e cycles:pp make -j199' stop working on the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed at length in the threads in the Link tags below. The fix provided by Ian wasn't acceptable and work to fix this will take time we don't have at this point, so lets revert this and work on it on the next devel cycle. Reported-by:
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: - two important netfs integration fixes - including for a data corruption and also fixes for multiple xfstests - reenable swap support over SMB3 * tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix missing set of remote_i_size cifs: Fix smb3_insert_range() to move the zero_point cifs: update internal version number smb3: reenable swapfiles over SMB3 mounts
-
- 25 May, 2024 8 commits
-
-
Linus Torvalds authored
Merge tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "16 hotfixes, 11 of which are cc:stable. A few nilfs2 fixes, the remainder are for MM: a couple of selftests fixes, various singletons fixing various issues in various parts" * tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/ksm: fix possible UAF of stable_node mm/memory-failure: fix handling of dissolved but not taken off from buddy pages mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again nilfs2: fix potential hang in nilfs_detach_log_writer() nilfs2: fix unexpected freezing of nilfs_segctor_sync() nilfs2: fix use-after-free of timer for log writer thread selftests/mm: fix build warnings on ppc64 arm64: patching: fix handling of execmem addresses selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages selftests/mm: compaction_test: fix bogus test success on Aarch64 mailmap: update email address for Satya Priya mm/huge_memory: don't unpoison huge_zero_folio kasan, fortify: properly rename memintrinsics lib: add version into /proc/allocinfo output mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Ingo Molnar: - Fix x86 IRQ vector leak caused by a CPU offlining race - Fix build failure in the riscv-imsic irqchip driver caused by an API-change semantic conflict - Fix use-after-free in irq_find_at_or_after() * tag 'irq-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after() genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline irqchip/riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: - Fix regressions of the new x86 CPU VFM (vendor/family/model) enumeration/matching code - Fix crash kernel detection on buggy firmware with non-compliant ACPI MADT tables - Address Kconfig warning * tag 'x86-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Fix x86_match_cpu() to match just X86_VENDOR_INTEL crypto: x86/aes-xts - switch to new Intel CPU model defines x86/topology: Handle bogus ACPI tables correctly x86/kconfig: Select ARCH_WANT_FRAME_POINTERS again when UNWINDER_FRAME_POINTER=y
-
https://github.com/cminyard/linux-ipmiLinus Torvalds authored
Pull ipmi updates from Corey Minyard: "Mostly updates for deprecated interfaces, platform.remove and converting from a tasklet to a BH workqueue. Also use HAS_IOPORT for disabling inb()/outb()" * tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmi: ipmi: kcs_bmc_npcm7xx: Convert to platform remove callback returning void ipmi: kcs_bmc_aspeed: Convert to platform remove callback returning void ipmi: ipmi_ssif: Convert to platform remove callback returning void ipmi: ipmi_si_platform: Convert to platform remove callback returning void ipmi: ipmi_powernv: Convert to platform remove callback returning void ipmi: bt-bmc: Convert to platform remove callback returning void char: ipmi: handle HAS_IOPORT dependencies ipmi: Convert from tasklet to BH workqueue
-
https://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph updates from Ilya Dryomov: "A series from Xiubo that adds support for additional access checks based on MDS auth caps which were recently made available to clients. This is needed to prevent scenarios where the MDS quietly discards updates that a UID-restricted client previously (wrongfully) acked to the user. Other than that, just a documentation fixup" * tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-client: doc: ceph: update userspace command to get CephFS metadata ceph: add CEPHFS_FEATURE_MDS_AUTH_CAPS_CHECK feature bit ceph: check the cephx mds auth access for async dirop ceph: check the cephx mds auth access for open ceph: check the cephx mds auth access for setattr ceph: add ceph_mds_check_access() helper ceph: save cap_auths in MDS client when session is opened
-
https://github.com/Paragon-Software-Group/linux-ntfs3Linus Torvalds authored
Pull ntfs3 updates from Konstantin Komarov: "Fixes: - reusing of the file index (could cause the file to be trimmed) - infinite dir enumeration - taking DOS names into account during link counting - le32_to_cpu conversion, 32 bit overflow, NULL check - some code was refactored Changes: - removed max link count info display during driver init Remove: - atomic_open has been removed for lack of use" * tag 'ntfs3_for_6.10' of https://github.com/Paragon-Software-Group/linux-ntfs3: fs/ntfs3: Break dir enumeration if directory contents error fs/ntfs3: Fix case when index is reused during tree transformation fs/ntfs3: Mark volume as dirty if xattr is broken fs/ntfs3: Always make file nonresident on fallocate call fs/ntfs3: Redesign ntfs_create_inode to return error code instead of inode fs/ntfs3: Use variable length array instead of fixed size fs/ntfs3: Use 64 bit variable to avoid 32 bit overflow fs/ntfs3: Check 'folio' pointer for NULL fs/ntfs3: Missed le32_to_cpu conversion fs/ntfs3: Remove max link count info display during driver init fs/ntfs3: Taking DOS names into account during link counting fs/ntfs3: remove atomic_open fs/ntfs3: use kcalloc() instead of kzalloc()
-
git://git.samba.org/ksmbdLinus Torvalds authored
Pull smb server fixes from Steve French: "Two ksmbd server fixes, both for stable" * tag '6.10-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: ignore trailing slashes in share paths ksmbd: avoid to send duplicate oplock break notifications
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC updates from Alexandre Belloni: "There is one new driver and then most of the changes are the device tree bindings conversions to yaml. New driver: - Epson RX8111 Drivers: - Many Device Tree bindings conversions to dtschema - pcf8563: wakeup-source support" * tag 'rtc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: pcf8563: add wakeup-source support rtc: rx8111: handle VLOW flag rtc: rx8111: demote warnings to debug level rtc: rx6110: Constify struct regmap_config dt-bindings: rtc: convert trivial devices into dtschema dt-bindings: rtc: stmp3xxx-rtc: convert to dtschema dt-bindings: rtc: pxa-rtc: convert to dtschema rtc: Add driver for Epson RX8111 dt-bindings: rtc: Add Epson RX8111 rtc: mcp795: drop unneeded MODULE_ALIAS rtc: nuvoton: Modify part number value rtc: test: Split rtc unit test into slow and normal speed test dt-bindings: rtc: nxp,lpc1788-rtc: convert to dtschema dt-bindings: rtc: digicolor-rtc: move to trivial-rtc dt-bindings: rtc: alphascale,asm9260-rtc: convert to dtschema dt-bindings: rtc: armada-380-rtc: convert to dtschema rtc: cros-ec: provide ID table for avoiding fallback match
-
