- 07 Jun, 2014 40 commits
-
-
Alex Hung authored
commit ff413195 upstream. The tp_features.bright_acpimode will not be set correctly for brightness control because ACPI_VIDEO_HID will not be located in ACPI. As a result, a duplicated key event will always be sent. acpi_video_backlight_support() is sufficient to detect standard ACPI brightness control. Signed-off-by:
Alex Hung <alex.hung@canonical.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com> Cc: Andreas Sturmlechner <andreas.sturmlechner@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bjorn Helgaas authored
commit f652e7d2 upstream. When we have an SHPC-capable bridge with a second SHPC-capable bridge below it, pushing the upstream bridge's attention button causes a deadlock. The deadlock happens because we use the shpchp_wq workqueue to run shpchp_pushbutton_thread(), which uses shpchp_disable_slot() to remove devices below the upstream bridge. When we remove the downstream bridge, we call shpc_remove(), the shpchp driver's .remove() method. That calls flush_workqueue(shpchp_wq), which deadlocks because the shpchp_pushbutton_thread() work item is still running. This patch avoids the deadlock by creating a workqueue for every slot and removing the single shared workqueue. Here's the call path that leads to the deadlock: shpchp_queue_pushbutton_work queue_work(shpchp_wq) # shpchp_pushbutton_thread ... shpchp_pushbutton_thread shpchp_disable_slot remove_board shpchp_unconfigure_device pci_stop_and_remove_bus_device ... shpc_remove # shpchp driver .remove method hpc_release_ctlr cleanup_slots flush_workqueue(shpchp_wq) This change is based on code inspection, since we don't have hardware with this topology. Based-on-patch-by:
Yijing Wang <wangyijing@huawei.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> [hq: Backported to 3.4: adjust context] Signed-off-by:
Qiang Huang <h.huangqiang@huawei.com> Signed-off-by:
-
Stanislaw Gruszka authored
commit 5b632fe8 upstream. Commit f0425bed "mac80211: retry sending failed BAR frames later instead of tearing down aggr" caused regression on rt2x00 hardware (connection hangs). This regression was fixed by commit be03d4a4 "rt2x00: Don't let mac80211 send a BAR when an AMPDU subframe fails". But the latter commit caused yet another problem reported in https://bugzilla.kernel.org/show_bug.cgi?id=42828#c22 After long discussion in this thread: http://mid.gmane.org/20121018075615.GA18212@redhat.com and testing various alternative solutions, which failed on one or other setup, we have no other good fix for the issues like just revert both mentioned earlier commits. To do not affect other hardware which benefit from commit f0425bed, instead of reverting it, introduce flag that when used will restore mac80211 behaviour before the commit. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> [replaced link with mid.gmane.org that has message-id] Signed-off-by:
Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Bruce Allan authored
commit d821a4c4 upstream. With a low enough MSS on the link partner and TSO enabled locally, the networking stack can periodically send a very large (e.g. 64KB) TCP message for which the driver will attempt to use more Tx descriptors than are available by default in the Tx ring. This is due to a workaround in the code that imposes a limit of only 4 MSS-sized segments per descriptor which appears to be a carry-over from the older e1000 driver and may be applicable only to some older PCI or PCIx parts which are not supported in e1000e. When the driver gets a message that is too large to fit across the configured number of Tx descriptors, it stops the upper stack from queueing any more and gets stuck in this state. After a timeout, the upper stack assumes the adapter is hung and calls the driver to reset it. Remove the unnecessary limitation of using up to only 4 MSS-sized segments per Tx descriptor, and put in a hard failure test to catch when attempting to check for message sizes larger than would fit in the whole Tx ring. Refactor the remaining logic that limits the size of data per Tx descriptor from a seemingly arbitrary 8KB to a limit based on the dynamic size of the Tx packet buffer as described in the hardware specification. Also, fix the logic in the check for space in the Tx ring for the next largest possible packet after the current one has been successfully queued for transmit, and use the appropriate defines for default ring sizes in e1000_probe instead of magic values. This issue goes back to the introduction of e1000e in 2.6.24 when it was split off from e1000. Reported-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Qiang Huang <h.huangqiang@huawei.com> Signed-off-by:
-
Alexander Stein authored
commit 2bd3bc4e upstream. According to C_CAN documentation, the reserved bit in IFx_MASK2 register is fixed 1. Signed-off-by:
Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit 6f8c2e79 upstream. The 'intel_idle_probe' probes the CPU and sets the CPU notifier. But if later on during the module initialization we fail (say in cpuidle_register_driver), we stop loading, but we neglect to unregister the CPU notifier. This means that during CPU hotplug events the system will fail: calling intel_idle_init+0x0/0x326 @ 1 intel_idle: MWAIT substates: 0x1120 intel_idle: v0.4 model 0x2A intel_idle: lapic_timer_reliable_states 0xffffffff intel_idle: intel_idle yielding to none initcall intel_idle_init+0x0/0x326 returned -19 after 14 usecs ... some time later, offlining and onlining a CPU: cpu 3 spinlock event irq 62 BUG: unable to ] __cpuidle_register_device+0x1c/0x120 PGD 99b8b067 PUD 99b95067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: xen_evtchn nouveau mxm_wmi wmi radeon ttm i915 fbcon tileblit font atl1c bitblit softcursor drm_kms_helper video xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xenfs xen_privcmd mperf CPU 0 Pid: 2302, comm: udevd Not tainted 3.8.0-rc3upstream-00249-g09ad159 #1 MSI MS-7680/H61M-P23 (MS-7680) RIP: e030:[<ffffffff814d956c>] [<ffffffff814d956c>] __cpuidle_register_device+0x1c/0x120 RSP: e02b:ffff88009dacfcb8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff880105380000 RCX: 000000000000001c RDX: 0000000000000000 RSI: 0000000000000055 RDI: ffff880105380000 RBP: ffff88009dacfce8 R08: ffffffff81a4f048 R09: 0000000000000008 R10: 0000000000000008 R11: 0000000000000000 R12: ffff880105380000 R13: 00000000ffffffdd R14: 0000000000000000 R15: ffffffff81a523d0 FS: 00007f37bd83b7a0(0000) GS:ffff880105200000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 00000000a09ea000 CR4: 0000000000042660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process udevd (pid: 2302, threadinfo ffff88009dace000, task ffff88009afb47f0) Stack: ffffffff8107f2d0 ffffffff810c2fb7 ffff88009dacfce8 00000000ffffffea ffff880105380000 00000000ffffffdd ffff88009dacfd08 ffffffff814d9882 0000000000000003 ffff880105380000 ffff88009dacfd28 ffffffff81340afd Call Trace: [<ffffffff8107f2d0>] ? collect_cpu_info_local+0x30/0x30 [<ffffffff810c2fb7>] ? __might_sleep+0xe7/0x100 [<ffffffff814d9882>] cpuidle_register_device+0x32/0x70 [<ffffffff81340afd>] intel_idle_cpu_init+0xad/0x110 [<ffffffff81340bc8>] cpu_hotplug_notify+0x68/0x80 [<ffffffff8166023d>] notifier_call_chain+0x4d/0x70 [<ffffffff810bc369>] __raw_notifier_call_chain+0x9/0x10 [<ffffffff81094a4b>] __cpu_notify+0x1b/0x30 [<ffffffff81652cf7>] _cpu_up+0x103/0x14b [<ffffffff81652e18>] cpu_up+0xd9/0xec [<ffffffff8164a254>] store_online+0x94/0xd0 [<ffffffff814122fb>] dev_attr_store+0x1b/0x20 [<ffffffff81216404>] sysfs_write_file+0xf4/0x170 [<ffffffff811a1024>] vfs_write+0xb4/0x130 [<ffffffff811a17ea>] sys_write+0x5a/0xa0 [<ffffffff816643a9>] system_call_fastpath+0x16/0x1b Code: 03 18 00 c9 c3 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83 ec 30 48 89 5d e8 4c 89 65 f0 48 89 fb 4c 89 6d f8 e8 84 08 00 00 <48> 8b 78 08 49 89 c4 e8 f8 7f c1 ff 89 c2 b8 ea ff ff ff 84 d2 RIP [<ffffffff814d956c>] __cpuidle_register_device+0x1c/0x120 RSP <ffff88009dacfcb8> This patch fixes that by moving the CPU notifier registration as the last item to be done by the module. Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> [bwh: Backported to 3.2: notifier is registered only if we do not have ARAT] Signed-off-by:
-
Axel Lin authored
commit e8d9897f upstream. commit 81d0a6ae upstream. Use DIV_ROUND_UP to prevent truncation by integer division issue. This ensures we return enough delay time. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> [bwh: Backported to 3.2: delay is done by driver, not returned to the caller] Signed-off-by:
-
Axel Lin authored
commit bc3b7756 upstream. Current code does integer division (min_vol = min_uV / 1000) before pass min_vol to max8997_get_voltage_proper_val(). So it is possible min_vol is truncated to a smaller value. For example, if the request min_uV is 800900 for ldo. min_vol = 800900 / 1000 = 800 (mV) Then max8997_get_voltage_proper_val returns 800 mV for this case which is lower than the requested voltage. Use uV rather than mV in voltage_map_desc to prevent truncation by integer division. Signed-off-by:
-
Krzysztof Mazur authored
commit 0fde901f upstream. Some broken systems (like HP nc6120) in some cases, usually after LID close/open, enable VGA plane, making display unusable (black screen on LVDS, some strange mode on VGA output). We used to disable VGA plane only once at startup. Now we also check, if VGA plane is still disabled while changing mode, and fix that if something changed it. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57434Signed-off-by:
Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> [bwh: Backported to 3.2: intel_modeset_setup_hw_state() does not exist, so call i915_redisable_vga() directly from intel_lid_notify()] Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 47969684 upstream. The driver has only 4 hardcoded labels, but allows much more memory. Fix it by removing the hardcoded logic, using snprintf() instead. [ 19.833972] general protection fault: 0000 [#1] SMP [ 19.837733] Modules linked in: i82975x_edac(+) edac_core firewire_ohci firewire_core crc_itu_t nouveau mxm_wmi wmi video i2c_algo_bit drm_kms_helper ttm drm i2c_core [ 19.837733] CPU 0 [ 19.837733] Pid: 390, comm: udevd Not tainted 3.6.1-1.fc17.x86_64.debug #1 Dell Inc. Precision WorkStation 390 /0MY510 [ 19.837733] RIP: 0010:[<ffffffff813463a8>] [<ffffffff813463a8>] strncpy+0x18/0x30 [ 19.837733] RSP: 0018:ffff880078535b68 EFLAGS: 00010202 [ 19.837733] RAX: ffff880069fa9708 RBX: ffff880078588000 RCX: ffff880069fa9708 [ 19.837733] RDX: 000000000000001f RSI: 5f706f5f63616465 RDI: ffff880069fa9708 [ 19.837733] RBP: ffff880078535b68 R08: ffff880069fa9727 R09: 000000000000fffe [ 19.837733] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003 [ 19.837733] R13: 0000000000000000 R14: ffff880069fa9290 R15: ffff880079624a80 [ 19.837733] FS: 00007f3de01ee840(0000) GS:ffff88007c400000(0000) knlGS:0000000000000000 [ 19.837733] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 19.837733] CR2: 00007f3de00b9000 CR3: 0000000078dbc000 CR4: 00000000000007f0 [ 19.837733] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 19.837733] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 19.837733] Process udevd (pid: 390, threadinfo ffff880078534000, task ffff880079642450) [ 19.837733] Stack: [ 19.837733] ffff880078535c18 ffffffffa017c6b8 00040000816d627f ffff880079624a88 [ 19.837733] ffffc90004cd6000 ffff880079624520 ffff88007ac21148 0000000000000000 [ 19.837733] 0000000000000000 0004000000000000 feda000078535bc8 ffffffff810d696d [ 19.837733] Call Trace: [ 19.837733] [<ffffffffa017c6b8>] i82975x_init_one+0x2e6/0x3e6 [i82975x_edac] ... Fix bug reported at: https://bugzilla.redhat.com/show_bug.cgi?id=848149 And, very likely: https://bbs.archlinux.org/viewtopic.php?id=148033 https://bugzilla.kernel.org/show_bug.cgi?id=47171 Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> [bwh: Backported to 3.2: - Adjust context - Use csrow->channels[chan].label not csrow->channels[chan]->dimm->label] Signed-off-by:
-
Jiri Slaby authored
commit bcdee04e upstream. pci_disable_device(pdev) used to be in pci remove function. But this PCI device has two functions with interrupt lines connected to a single pin. The other one is a USB host controller. So when we disable the PIN there e.g. by rmmod hpilo, the controller stops working. It is because the interrupt link is disabled in ACPI since it is not refcounted yet. See acpi_pci_link_free_irq called from acpi_pci_irq_disable. It is not the best solution whatsoever, but as a workaround until the ACPI irq link refcounting is sorted out this should fix the reported errors. References: https://lkml.org/lkml/2008/11/4/535Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Nobin Mathew <nobin.mathew@gmail.com> Cc: Robert Hancock <hancockr@shaw.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Altobelli <david.altobelli@hp.com> Signed-off-by:
-
Herton Ronaldo Krzesinski authored
commit d60e7ec1 upstream. On floppy initialization, if something failed inside the loop we call add_disk, there was no cleanup of previous iterations in the error handling. Signed-off-by:
Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Jens Axboe <axboe@kernel.dk> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Seth Forshee authored
commit 824efd37 upstream. Commit c039450 (Input: synaptics - handle out of bounds values from the hardware) caused any hardware reported values over 7167 to be treated as a wrapped-around negative value. It turns out that some firmware uses the value 8176 to indicate a finger near the edge of the touchpad whose actual position cannot be determined. This value now gets treated as negative, which can cause pointer jumps and broken edge scrolling on these machines. I only know of one touchpad which reports negative values, and this hardware never reports any value lower than -8 (i.e. 8184). Moving the threshold for treating a value as negative up to 8176 should work fine then for any hardware we currently know about, and since we're dealing with unspecified behavior it's probably the best we can do. The special 8176 value is also likely to result in sudden jumps in position, so let's also clamp this to the maximum specified value for the axis. BugLink: http://bugs.launchpad.net/bugs/1046512 https://bugzilla.kernel.org/show_bug.cgi?id=46371Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Reviewed-by:
Daniel Kurtz <djkurtz@chromium.org> Tested-by:
Alan Swanson <swanson@ukfsn.org> Tested-by:
Arteom <arutemus@gmail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Matthieu CASTET authored
commit 193819cf upstream. Without this patch, these PEB are not scrubbed until we put data in them. Bitflip can accumulate latter and we can loose the EC header (but VID header should be intact and allow to recover data). Signed-off-by:
Matthieu Castet <matthieu.castet@parrot.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> [bwh: Backported to 3.2: adjust filename, context] Signed-off-by:
-
Rashika Kheria authored
commit 46a51c80 upstream. This patch fixes the bug in reset_store caused by accessing NULL pointer. The bdev gets its value from bdget_disk() which could fail when memory pressure is severe and hence can return NULL because allocation of inode in bdget could fail. Hence, this patch introduces a check for bdev to prevent reference to a NULL pointer in the later part of the code. It also removes unnecessary check of bdev for fsync_bdev(). Acked-by:
Jerome Marchand <jmarchan@redhat.com> Signed-off-by:
Rashika Kheria <rashika.kheria@gmail.com> Acked-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
-
Sergey Senozhatsky authored
commit 75c7caf5 upstream. Pass valid_io_request() checks if request end coincides with disksize (end equals bound), only fail if we attempt to read beyond the bound. mkfs.ext2 produces numerous errors: [ 2164.632747] quiet_error: 1 callbacks suppressed [ 2164.633260] Buffer I/O error on device zram0, logical block 153599 [ 2164.633265] lost page write due to I/O error on zram0 Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
-
Jiang Liu authored
commit 12a7ad3b upstream. Function valid_io_request() should verify the entire request are within the zram device address range. Otherwise it may cause invalid memory access when accessing/modifying zram->meta->table[index] because the 'index' is out of range. Then it may access non-exist memory, randomly modify memory belong to other subsystems, which is hard to track down. Signed-off-by:
Jiang Liu <jiang.liu@huawei.com> Signed-off-by:
-
Jiang Liu authored
commit 39a9b8ac upstream. On error recovery path of zram_init(), it leaks the zram device object causing the failure. So change create_device() to free allocated resources on error path. Signed-off-by:
-
Jiang Liu authored
commit 6030ea9b upstream. Memory for zram->disk object may have already been freed after returning from destroy_device(zram), then it's unsafe for zram_reset_device(zram) to access zram->disk again. We can't solve this bug by flipping the order of destroy_device(zram) and zram_reset_device(zram), that will cause deadlock issues to the zram sysfs handler. So fix it by holding an extra reference to zram->disk before calling destroy_device(zram). Signed-off-by:
-
Minchan Kim authored
commit 7e5a5104 upstream. Now zram allocates new page with GFP_KERNEL in zram I/O path if IO is partial. Unfortunately, It may cause deadlock with reclaim path like below. write_page from fs fs_lock allocation(GFP_KERNEL) reclaim pageout write_page from fs fs_lock <-- deadlock This patch fixes it by using GFP_NOIO. In read path, we reorganize code flow so that kmap_atomic is called after the GFP_NOIO allocation. Acked-by:
Jerome Marchand <jmarchand@redhat.com> Acked-by:
Nitin Gupta <ngupta@vflare.org> [ penberg@kernel.org: don't use GFP_ATOMIC ] Signed-off-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Joe Thornber authored
commit f046f89a upstream. Fix a bug in dm_btree_remove that could leave leaf values with incorrect reference counts. The effect of this was that removal of a shared block could result in the space maps thinking the block was no longer used. More concretely, if you have a thin device and a snapshot of it, sending a discard to a shared region of the thin could corrupt the snapshot. Thinp uses a 2-level nested btree to store it's mappings. This first level is indexed by thin device, and the second level by logical block. Often when we're removing an entry in this mapping tree we need to rebalance nodes, which can involve shadowing them, possibly creating a copy if the block is shared. If we do create a copy then children of that node need to have their reference counts incremented. In this way reference counts percolate down the tree as shared trees diverge. The rebalance functions were incrementing the children at the appropriate time, but they were always assuming the children were internal nodes. This meant the leaf values (in our case packed block/flags entries) were not being incremented. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com> [bwh: Backported to 3.2: bump target version numbers from 1.0.1 to 1.0.2] Signed-off-by:
Rui Xiang <rui.xiang@huawei.com> Signed-off-by:
-
Shiva Krishna Merla authored
commit 954a73d5 upstream. Whenever multipath_dtr() is happening we must prevent queueing any further path activation work. Implement this by adding a new 'pg_init_disabled' flag to the multipath structure that denotes future path activation work should be skipped if it is set. By disabling pg_init and then re-enabling in flush_multipath_work() we also avoid the potential for pg_init to be initiated while suspending an mpath device. Without this patch a race condition exists that may result in a kernel panic: 1) If after pg_init_done() decrements pg_init_in_progress to 0, a call to wait_for_pg_init_completion() assumes there are no more pending path management commands. 2) If pg_init_required is set by pg_init_done(), due to retryable mode_select errors, then process_queued_ios() will again queue the path activation work. 3) If free_multipath() completes before activate_path() work is called a NULL pointer dereference like the following can be seen when accessing members of the recently destructed multipath: BUG: unable to handle kernel NULL pointer dereference at 0000000000000090 RIP: 0010:[<ffffffffa003db1b>] [<ffffffffa003db1b>] activate_path+0x1b/0x30 [dm_multipath] [<ffffffff81090ac0>] worker_thread+0x170/0x2a0 [<ffffffff81096c80>] ? autoremove_wake_function+0x0/0x40 [switch to disabling pg_init in flush_multipath_work & header edits by Mike Snitzer] Signed-off-by:
Shiva Krishna Merla <shivakrishna.merla@netapp.com> Reviewed-by:
Krishnasamy Somasundaram <somasundaram.krishnasamy@netapp.com> Tested-by:
Speagle Andy <Andy.Speagle@netapp.com> Acked-by:
Junichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> [bwh: Backported to 3.2: - Adjust context - Bump version to 1.3.2 not 1.6.0] Signed-off-by:
-
Mikulas Patocka authored
commit 230c83af upstream. There is a possible leak of snapshot space in case of crash. The reason for space leaking is that chunks in the snapshot device are allocated sequentially, but they are finished (and stored in the metadata) out of order, depending on the order in which copying finished. For example, supposed that the metadata contains the following records SUPERBLOCK METADATA (blocks 0 ... 250) DATA 0 DATA 1 DATA 2 ... DATA 250 Now suppose that you allocate 10 new data blocks 251-260. Suppose that copying of these blocks finish out of order (block 260 finished first and the block 251 finished last). Now, the snapshot device looks like this: SUPERBLOCK METADATA (blocks 0 ... 250, 260, 259, 258, 257, 256) DATA 0 DATA 1 DATA 2 ... DATA 250 DATA 251 DATA 252 DATA 253 DATA 254 DATA 255 METADATA (blocks 255, 254, 253, 252, 251) DATA 256 DATA 257 DATA 258 DATA 259 DATA 260 Now, if the machine crashes after writing the first metadata block but before writing the second metadata block, the space for areas DATA 250-255 is leaked, it contains no valid data and it will never be used in the future. This patch makes dm-snapshot complete exceptions in the same order they were allocated, thus fixing this bug. Note: when backporting this patch to the stable kernel, change the version field in the following way: * if version in the stable kernel is {1, 11, 1}, change it to {1, 12, 0} * if version in the stable kernel is {1, 10, 0} or {1, 10, 1}, change it to {1, 10, 2} Userspace reads the version to determine if the bug was fixed, so the version change is needed. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Harshula Jayasuriya authored
commit e4daf1ff upstream. The following call chain: ------------------------------------------------------------ nfs4_get_vfs_file - nfsd_open - dentry_open - do_dentry_open - __get_file_write_access - get_write_access - return atomic_inc_unless_negative(&inode->i_writecount) ? 0 : -ETXTBSY; ------------------------------------------------------------ can result in the following state: ------------------------------------------------------------ struct nfs4_file { ... fi_fds = {0xffff880c1fa65c80, 0xffffffffffffffe6, 0x0}, fi_access = {{ counter = 0x1 }, { counter = 0x0 }}, ... ------------------------------------------------------------ 1) First time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is NULL, hence nfsd_open() is called where we get status set to an error and fp->fi_fds[O_WRONLY] to -ETXTBSY. Thus we do not reach nfs4_file_get_access() and fi_access[O_WRONLY] is not incremented. 2) Second time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is NOT NULL (-ETXTBSY), so nfsd_open() is NOT called, but nfs4_file_get_access() IS called and fi_access[O_WRONLY] is incremented. Thus we leave a landmine in the form of the nfs4_file data structure in an incorrect state. 3) Eventually, when __nfs4_file_put_access() is called it finds fi_access[O_WRONLY] being non-zero, it decrements it and calls nfs4_file_put_fd() which tries to fput -ETXTBSY. ------------------------------------------------------------ ... [exception RIP: fput+0x9] RIP: ffffffff81177fa9 RSP: ffff88062e365c90 RFLAGS: 00010282 RAX: ffff880c2b3d99cc RBX: ffff880c2b3d9978 RCX: 0000000000000002 RDX: dead000000100101 RSI: 0000000000000001 RDI: ffffffffffffffe6 RBP: ffff88062e365c90 R8: ffff88041fe797d8 R9: ffff88062e365d58 R10: 0000000000000008 R11: 0000000000000000 R12: 0000000000000001 R13: 0000000000000007 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #9 [ffff88062e365c98] __nfs4_file_put_access at ffffffffa0562334 [nfsd] #10 [ffff88062e365cc8] nfs4_file_put_access at ffffffffa05623ab [nfsd] #11 [ffff88062e365ce8] free_generic_stateid at ffffffffa056634d [nfsd] #12 [ffff88062e365d18] release_open_stateid at ffffffffa0566e4b [nfsd] #13 [ffff88062e365d38] nfsd4_close at ffffffffa0567401 [nfsd] #14 [ffff88062e365d88] nfsd4_proc_compound at ffffffffa0557f28 [nfsd] #15 [ffff88062e365dd8] nfsd_dispatch at ffffffffa054543e [nfsd] #16 [ffff88062e365e18] svc_process_common at ffffffffa04ba5a4 [sunrpc] #17 [ffff88062e365e98] svc_process at ffffffffa04babe0 [sunrpc] #18 [ffff88062e365eb8] nfsd at ffffffffa0545b62 [nfsd] #19 [ffff88062e365ee8] kthread at ffffffff81090886 #20 [ffff88062e365f48] kernel_thread at ffffffff8100c14a ------------------------------------------------------------ Signed-off-by:
Harshula Jayasuriya <harshula@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> [xr: Backported to 3.4: adjust context] Signed-off-by:
-
NeilBrown authored
commit 80b48124 upstream. The 'enough' function is written to work with 'near' arrays only in that is implicitly assumes that the offset from one 'group' of devices to the next is the same as the number of copies. In reality it is the number of 'near' copies. So change it to make this number explicit. This bug makes it possible to run arrays without enough drives present, which is dangerous. It is appropriate for an -stable kernel, but will almost certainly need to be modified for some of them. Reported-by:
Jakub Husák <jakub@gooseman.cz> Signed-off-by:
NeilBrown <neilb@suse.de> [bwh: Backported to 3.2: s/geo->/conf->/] Signed-off-by:
-
Mikulas Patocka authored
commit 23cb2109 upstream. Add module aliases so that autoloading works correctly if the user tries to activate "snapshot-origin" or "snapshot-merge" targets. Reference: https://bugzilla.redhat.com/889973Reported-by:
Chao Yang <chyang@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit 502624bd upstream. This patch uses memalloc_noio_save to avoid a possible deadlock in dm-bufio. (it could happen only with large block size, at most PAGE_SIZE << MAX_ORDER (typically 8MiB). __vmalloc doesn't fully respect gfp flags. The specified gfp flags are used for allocation of requested pages, structures vmap_area, vmap_block and vm_struct and the radix tree nodes. However, the kernel pagetables are allocated always with GFP_KERNEL. Thus the allocation of pagetables can recurse back to the I/O layer and cause a deadlock. This patch uses the function memalloc_noio_save to set per-process PF_MEMALLOC_NOIO flag and the function memalloc_noio_restore to restore it. When this flag is set, all allocations in the process are done with implied GFP_NOIO flag, thus the deadlock can't happen. This should be backported to stable kernels, but they don't have the PF_MEMALLOC_NOIO flag and memalloc_noio_save/memalloc_noio_restore functions. So, PF_MEMALLOC should be set and restored instead. Signed-off-by:
-
Trond Myklebust authored
commit c489ee29 upstream. NFS4ERR_DELAY is a legal reply when we call DESTROY_SESSION. It usually means that the server is busy handling an unfinished RPC request. Just sleep for a second and then retry. We also need to be able to handle the NFS4ERR_BACK_CHAN_BUSY return value. If the NFS server has outstanding callbacks, we just want to similarly sleep & retry. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Weston Andros Adamson authored
commit 085b7a45 upstream. layoutget's prepare hook can call rpc_exit with status = NFS4_OK (0). Because of this, nfs4_proc_layoutget can't depend on a 0 status to mean that the RPC was successfully sent, received and parsed. To fix this, use the result's len member to see if parsing took place. This fixes the following OOPS -- calling xdr_init_decode() with a buffer length 0 doesn't set the stream's 'p' member and ends up using uninitialized memory in filelayout_decode_layout. BUG: unable to handle kernel paging request at 0000000000008050 IP: [<ffffffff81282e78>] memcpy+0x18/0x120 PGD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:11.0/0000:02:01.0/irq CPU 1 Modules linked in: nfs_layout_nfsv41_files nfs lockd fscache auth_rpcgss nfs_acl autofs4 sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 dm_mirror dm_region_hash dm_log dm_mod ppdev parport_pc parport snd_ens1371 snd_rawmidi snd_ac97_codec ac97_bus snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc e1000 microcode vmware_balloon i2c_piix4 i2c_core sg shpchp ext4 mbcache jbd2 sr_mod cdrom sd_mod crc_t10dif pata_acpi ata_generic ata_piix mptspi mptscsih mptbase scsi_transport_spi [last unloaded: speedstep_lib] Pid: 1665, comm: flush-0:22 Not tainted 2.6.32-356-test-2 #2 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform RIP: 0010:[<ffffffff81282e78>] [<ffffffff81282e78>] memcpy+0x18/0x120 RSP: 0018:ffff88003dfab588 EFLAGS: 00010206 RAX: ffff88003dc42000 RBX: ffff88003dfab610 RCX: 0000000000000009 RDX: 000000003f807ff0 RSI: 0000000000008050 RDI: ffff88003dc42000 RBP: ffff88003dfab5b0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000080 R12: 0000000000000024 R13: ffff88003dc42000 R14: ffff88003f808030 R15: ffff88003dfab6a0 FS: 0000000000000000(0000) GS:ffff880003420000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000008050 CR3: 000000003bc92000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process flush-0:22 (pid: 1665, threadinfo ffff88003dfaa000, task ffff880037f77540) Stack: ffffffffa0398ac1 ffff8800397c5940 ffff88003dfab610 ffff88003dfab6a0 <d> ffff88003dfab5d0 ffff88003dfab680 ffffffffa01c150b ffffea0000d82e70 <d> 000000508116713b 0000000000000000 0000000000000000 0000000000000000 Call Trace: [<ffffffffa0398ac1>] ? xdr_inline_decode+0xb1/0x120 [sunrpc] [<ffffffffa01c150b>] filelayout_decode_layout+0xeb/0x350 [nfs_layout_nfsv41_files] [<ffffffffa01c17fc>] filelayout_alloc_lseg+0x8c/0x3c0 [nfs_layout_nfsv41_files] [<ffffffff8150e6ce>] ? __wait_on_bit+0x7e/0x90 Signed-off-by:
Weston Andros Adamson <dros@netapp.com> Signed-off-by:
-
Trond Myklebust authored
commit a073dbff upstream. We need to clear the NFS_LSEG_LAYOUTCOMMIT bits atomically with the NFS_INO_LAYOUTCOMMIT bit, otherwise we may end up with situations where the two are out of sync. The first half of the problem is to ensure that pnfs_layoutcommit_inode clears the NFS_LSEG_LAYOUTCOMMIT bit through pnfs_list_write_lseg. We still need to keep the reference to those segments until the RPC call is finished, so in order to make it clear _where_ those references come from, we add a helper pnfs_list_write_lseg_done() that cleans up after pnfs_list_write_lseg. Signed-off-by:
Benny Halevy <bhalevy@tonian.com> [bwh: Backported to 3.2: s/pnfs_put_lseg/put_lseg/] Signed-off-by:
-
Chuck Lever authored
commit 56d08fef upstream. Squelch compiler warnings: fs/nfs/nfs4proc.c: In function ‘__nfs4_get_acl_uncached’: fs/nfs/nfs4proc.c:3811:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] fs/nfs/nfs4proc.c:3818:15: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Introduced by commit bf118a34 "NFSv4: include bitmap in nfsv4 get acl data", Dec 7, 2011. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
fanchaoting authored
commit b022032e upstream. we should return error status directly when nfs4_preprocess_stateid_op return error. Signed-off-by:
fanchaoting <fanchaoting@cn.fujitsu.com> Signed-off-by:
-
Dan Carpenter authored
commit 0439f31c upstream. This seems like it could overflow on 32 bits. Use kmalloc_array() which has overflow protection built in. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
J. Bruce Fields authored
commit 365da4ad upstream. This fixes a regression from 24750082 "nfsd4: fix decoding of compounds across page boundaries". The previous code was correct: argp->pagelist is initialized in nfs4svc_deocde_compoundargs to rqstp->rq_arg.pages, and is therefore a pointer to the page *after* the page we are currently decoding. The reason that patch nevertheless fixed a problem with decoding compounds containing write was a bug in the write decoding introduced by 5a80a54d "nfsd4: reorganize write decoding", after which write decoding no longer adhered to the rule that argp->pagelist point to the next page. Signed-off-by:
-
Andy Adamson authored
commit 4a82fd7c upstream. When the state manager is processing the NFS4CLNT_DELEGRETURN flag, session draining is off, but DELEGRETURN can still get a session error. The async handler calls nfs4_schedule_session_recovery returns -EAGAIN, and the DELEGRETURN done then restarts the RPC task in the prepare state. With the state manager still processing the NFS4CLNT_DELEGRETURN flag with session draining off, these DELEGRETURNs will cycle with errors filling up the session slots. This prevents OPEN reclaims (from nfs_delegation_claim_opens) required by the NFS4CLNT_DELEGRETURN state manager processing from completing, hanging the state manager in the __rpc_wait_for_completion_task in nfs4_run_open_task as seen in this kernel thread dump: kernel: 4.12.32.53-ma D 0000000000000000 0 3393 2 0x00000000 kernel: ffff88013995fb60 0000000000000046 ffff880138cc5400 ffff88013a9df140 kernel: ffff8800000265c0 ffffffff8116eef0 ffff88013fc10080 0000000300000001 kernel: ffff88013a4ad058 ffff88013995ffd8 000000000000fbc8 ffff88013a4ad058 kernel: Call Trace: kernel: [<ffffffff8116eef0>] ? cache_alloc_refill+0x1c0/0x240 kernel: [<ffffffffa0358110>] ? rpc_wait_bit_killable+0x0/0xa0 [sunrpc] kernel: [<ffffffffa0358152>] rpc_wait_bit_killable+0x42/0xa0 [sunrpc] kernel: [<ffffffff8152914f>] __wait_on_bit+0x5f/0x90 kernel: [<ffffffffa0358110>] ? rpc_wait_bit_killable+0x0/0xa0 [sunrpc] kernel: [<ffffffff815291f8>] out_of_line_wait_on_bit+0x78/0x90 kernel: [<ffffffff8109b520>] ? wake_bit_function+0x0/0x50 kernel: [<ffffffffa035810d>] __rpc_wait_for_completion_task+0x2d/0x30 [sunrpc] kernel: [<ffffffffa040d44c>] nfs4_run_open_task+0x11c/0x160 [nfs] kernel: [<ffffffffa04114e7>] nfs4_open_recover_helper+0x87/0x120 [nfs] kernel: [<ffffffffa0411646>] nfs4_open_recover+0xc6/0x150 [nfs] kernel: [<ffffffffa040cc6f>] ? nfs4_open_recoverdata_alloc+0x2f/0x60 [nfs] kernel: [<ffffffffa0414e1a>] nfs4_open_delegation_recall+0x6a/0xa0 [nfs] kernel: [<ffffffffa0424020>] nfs_end_delegation_return+0x120/0x2e0 [nfs] kernel: [<ffffffff8109580f>] ? queue_work+0x1f/0x30 kernel: [<ffffffffa0424347>] nfs_client_return_marked_delegations+0xd7/0x110 [nfs] kernel: [<ffffffffa04225d8>] nfs4_run_state_manager+0x548/0x620 [nfs] kernel: [<ffffffffa0422090>] ? nfs4_run_state_manager+0x0/0x620 [nfs] kernel: [<ffffffff8109b0f6>] kthread+0x96/0xa0 kernel: [<ffffffff8100c20a>] child_rip+0xa/0x20 kernel: [<ffffffff8109b060>] ? kthread+0x0/0xa0 kernel: [<ffffffff8100c200>] ? child_rip+0x0/0x20 The state manager can not therefore process the DELEGRETURN session errors. Change the async handler to wait for recovery on session errors. Signed-off-by:
Andy Adamson <andros@netapp.com> Signed-off-by:
-
Mateusz Guzik authored
commit 24261fc2 upstream. cifsFileInfo objects hold references to dentries and it is possible that these will still be around in workqueues when VFS decides to kill super block during unmount. This results in panics like this one: BUG: Dentry ffff88001f5e76c0{i=66b4a,n=1M-2} still in use (1) [unmount of cifs cifs] ------------[ cut here ]------------ kernel BUG at fs/dcache.c:943! [..] Process umount (pid: 1781, threadinfo ffff88003d6e8000, task ffff880035eeaec0) [..] Call Trace: [<ffffffff811b44f3>] shrink_dcache_for_umount+0x33/0x60 [<ffffffff8119f7fc>] generic_shutdown_super+0x2c/0xe0 [<ffffffff8119f946>] kill_anon_super+0x16/0x30 [<ffffffffa036623a>] cifs_kill_sb+0x1a/0x30 [cifs] [<ffffffff8119fcc7>] deactivate_locked_super+0x57/0x80 [<ffffffff811a085e>] deactivate_super+0x4e/0x70 [<ffffffff811bb417>] mntput_no_expire+0xd7/0x130 [<ffffffff811bc30c>] sys_umount+0x9c/0x3c0 [<ffffffff81657c19>] system_call_fastpath+0x16/0x1b Fix this by making each cifsFileInfo object hold a reference to cifs super block, which implicitly keeps VFS super block around as well. Signed-off-by:
Mateusz Guzik <mguzik@redhat.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Reported-and-Tested-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
Steve French <sfrench@us.ibm.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Linus Torvalds authored
commit e994defb upstream. Use the *_light() versions that properly avoid doing the file user count updates when they are unnecessary. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [xr: Backported to 3.4: adjust function name] Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 80902822 upstream. Changing the overwrite mode for the ring buffer via the trace option only sets the normal buffer. But the snapshot buffer could swap with it, and then the snapshot would be in non overwrite mode and the normal buffer would be in overwrite mode, even though the option flag states otherwise. Keep the two buffers overwrite modes in sync. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Rui Xiang <rui.xiang@huawei.com> Signed-off-by:
-
Wei Yongjun authored
commit c4814202 upstream. Fix to return -ENOMEM in the allocation error case instead of 0 (if pmu_bus_running == 1), as done elsewhere in this function. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: acme@ghostprotocols.net Link: http://lkml.kernel.org/r/CAPgLHd8j_fWcgqe%3DKLWjpBj%2B%3Do0Pw6Z-SEq%3DNTPU08c2w1tngQ@mail.gmail.com [ Tweaked the error code setting placement and the changelog. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Rui Xiang <rui.xiang@huawei.com> Signed-off-by:
-
libin authored
commit fd9b86d3 upstream. Commit 201c373e ("sched/debug: Limit sd->*_idx range on sysctl") was an incomplete bug fix. This patch fixes sd->*_idx limit range to [0 ~ CPU_LOAD_IDX_MAX-1] avoiding array overflow caused by setting sd->*_idx to CPU_LOAD_IDX_MAX on sysctl. Signed-off-by:
Libin <huawei.libin@huawei.com> Cc: <jiang.liu@huawei.com> Cc: <guohanjun@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/51626610.2040607@huawei.comSigned-off-by:
-
