When a process runs out of stack the parisc kernel wrongly faults with SIGBUS
instead of the expected SIGSEGV signal.

This example shows how the kernel faults:
do_page_fault() command='a.out' type=15 address=0xfaac2000 in libc-2.24.so[f8308000+16c000]
trap #15: Data TLB miss fault, vm_start = 0xfa2c2000, vm_end = 0xfaac2000

The vma->vm_end value is the first address which does not belong to the vma, so
adjust the check to include vma->vm_end to the range for which to send the
SIGSEGV signal.

This patch unbreaks building the debian libsigsegv package.

Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>

Architectures with a compat syscall table must put compat_sys_keyctl()
in it, not sys_keyctl().  The parisc architecture was not doing this;
fix it.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>

Signed-off-by: Helge Deller <deller@gmx.de>

Signed-off-by: Helge Deller <deller@gmx.de>

Register gr[0] holds the PSW in interrupt context. It's absolutely
unlikely that the compiler will use register zero in a get_user() call,
but better BUG on such a case in fixup_exception() anyway.
Signed-off-by: Helge Deller <deller@gmx.de>

This is because of commit f98db601 ("sched/core: Add switch_mm_irqs_off()
and use it in the scheduler") in which switch_mm_irqs_off() is called by the
scheduler, vs switch_mm() which is used by use_mm().

This patch lets the parisc code mirror the x86 and powerpc code, ie. it
disables interrupts in switch_mm(), and optimises the scheduler case by
defining switch_mm_irqs_off().
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Helge Deller <deller@gmx.de>

The firmare in most parisc machines maintains a Page Deallocation Table (PDT)
which holds a list of physical memory addresses where hardware detected memory
errors (single bit and double bit errors).

This patch adds the missing PDC firmware calls and the logic to read the PDT
from firmware, report all current PDT entries and exclude the reported bad
memory from being used by Linux.
Signed-off-by: Helge Deller <deller@gmx.de>

The cr16 clocks of the physical PARISC CPUs are usually nonsynchronous.
Nevertheless, it seems that each CPU socket (which holds two cores) of
PA8800 and PA8900 CPUs (e.g. in a C8000 workstation) is fed by the same
clock source, which makes the cr16 clocks of each CPU socket syncronous.
Let's try to detect such situations and mark the cr16 clocksource stable
on single-socket and single-core machines.
Signed-off-by: Helge Deller <deller@gmx.de>

The last users have been migrated off by commits d19f5e41 ("parisc:
Clean up fixup routines for get_user()/put_user()") and 554bfece
("parisc: Fix access fault handling in pa_memcpy()").
Signed-off-by: Helge Deller <deller@gmx.de>

Fold trivial exception handling for lclear_user() and lstrnlen_user()
into the main functions.
Signed-off-by: Helge Deller <deller@gmx.de>

Pull IDE updates from David Miller:
 "Two small cleanups in the IDE layer"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  ide: don't call memcpy with the same source and destination
  ide: use setup_timer

Pull sparc updates from David Miller:
 "sparc changes, including a bug fix for handling exceptions during
  bzero on some sparc64 cpus"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: fix fault handling in NGbzero.S and GENbzero.S
  sparc: use memdup_user_nul in sun4m LED driver
  sparc: Remove redundant tests in boot_flags_init().

Pull networking fixes from David Miller:

 1) Fix multiqueue in stmmac driver on PCI, from Andy Shevchenko.

 2) cdc_ncm doesn't actually fully zero out the padding area is
    allocates on TX, from Jim Baxter.

 3) Don't leak map addresses in BPF verifier, from Daniel Borkmann.

 4) If we randomize TCP timestamps, we have to do it everywhere
    including SYN cookies. From Eric Dumazet.

 5) Fix "ethtool -S" crash in aquantia driver, from Pavel Belous.

 6) Fix allocation size for ntp filter bitmap in bnxt_en driver, from
    Dan Carpenter.

 7) Add missing memory allocation return value check to DSA loop driver,
    from Christophe Jaillet.

 8) Fix XDP leak on driver unload in qed driver, from Suddarsana Reddy
    Kalluru.

 9) Don't inherit MC list from parent inet connection sockets, another
    syzkaller spotted gem. Fix from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  dccp/tcp: do not inherit mc_list from parent
  qede: Split PF/VF ndos.
  qed: Correct doorbell configuration for !4Kb pages
  qed: Tell QM the number of tasks
  qed: Fix VF removal sequence
  qede: Fix XDP memory leak on unload
  net/mlx4_core: Reduce harmless SRIOV error message to debug level
  net/mlx4_en: Avoid adding steering rules with invalid ring
  net/mlx4_en: Change the error print to debug print
  drivers: net: wimax: i2400m: i2400m-usb: Use time_after for time comparison
  DECnet: Use container_of() for embedded struct
  Revert "ipv4: restore rt->fi for reference counting"
  net: mdio-mux: bcm-iproc: call mdiobus_free() in error path
  net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control
  ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf
  net: cdc_ncm: Fix TX zero padding
  stmmac: pci: split out common_default_data() helper
  stmmac: pci: RX queue routing configuration
  stmmac: pci: TX and RX queue priority configuration
  stmmac: pci: set default number of rx and tx queues
  ...

Pull dmaengine updates from Vinod Koul:
 "This time again a smaller update consisting of:

   - support for TI DA8xx dma controller and updates to the cppi driver

   - updates on bunch of drivers like xilinx, pl08x, stm32-dma, mv_xor,
     ioat, dmatest"

* tag 'dmaengine-4.12-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (35 commits)
  dmaengine: pl08x: remove lock documentation
  dmaengine: pl08x: fix pl08x_dma_chan_state documentation
  dmaengine: pl08x: Use the BIT() macro consistently
  dmaengine: pl080: Fix some missing kerneldoc
  dmaengine: pl080: Cut some unused defines
  dmaengine: dmatest: Add check for supported buffer count (sg_buffers)
  dmaengine: dmatest: Select DMA_ENGINE_RAID as its needed for the slave_sg test
  dmaengine: virt-dma: Convert to use list_for_each_entry_safe()
  dma-debug: use offset_in_page() macro
  dmaengine: mv_xor: use offset_in_page() macro
  dmaengine: dmatest: use offset_in_page() macro
  dmaengine: sun4i: fix invalid argument
  dmaengine: ioat: use setup_timer
  dmaengine: cppi41: Fix an Oops happening in cppi41_dma_probe()
  dmaengine: pl330: remove pdata based initialization
  dmaengine: cppi: fix build error due to bad variable
  dmaengine: imx-sdma: add 1ms delay to ensure SDMA channel is stopped
  dmaengine: cppi41: use managed functions devm_*()
  dmaengine: cppi41: fix cppi41_dma_tx_status() logic
  dmaengine: qcom_hidma: pause the channel on shutdown
  ...

Merge tag 'pwm/for-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "Adds a new driver for the PWM controller found on MediaTek SoCs and
  extends support for the Atmel PWM controller to include the SAMA5D2.

  Some existing drivers have been migrated to the atomic API and a few
  others see miscellaneous improvements"

* tag 'pwm/for-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: tegra: Read PWM clock source rate in driver init
  pwm: pca9685: Fix GPIO-only operation
  pwm: mediatek: Don't explicitly set .owner
  pwm: tegra: Avoid potential overflow for short periods
  pwm: tegra: Add support to configure pin state in suspends/resume
  pwm: tegra: Add DT binding details to configure pin in suspends/resume
  pwm: tegra: Increase precision in PWM rate calculation
  pwm: tegra: Use DIV_ROUND_CLOSEST_ULL() instead of local implementation
  pwm: Add MediaTek PWM support
  dt-bindings: pwm: Add MediaTek PWM bindings
  pwm: atmel: Enable PWM on sama5d2
  pwm: atmel: Switch to atomic PWM
  pwm: atmel-hlcdc: Implement the suspend/resume hooks
  pwm: atmel-hlcdc: Convert to the atomic PWM API

Pull IOMMU updates from Joerg Roedel:

 - code optimizations for the Intel VT-d driver

 - ability to switch off a previously enabled Intel IOMMU

 - support for 'struct iommu_device' for OMAP, Rockchip and Mediatek
   IOMMUs

 - header optimizations for IOMMU core code headers and a few fixes that
   became necessary in other parts of the kernel because of that

 - ACPI/IORT updates and fixes

 - Exynos IOMMU optimizations

 - updates for the IOMMU dma-api code to bring it closer to use per-cpu
   iova caches

 - new command-line option to set default domain type allocated by the
   iommu core code

 - another command line option to allow the Intel IOMMU switched off in
   a tboot environment

 - ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using an
   IDENTITY domain in conjunction with DMA ops, Support for SMR masking,
   Support for 16-bit ASIDs (was previously broken)

 - various other small fixes and improvements

* tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (63 commits)
  soc/qbman: Move dma-mapping.h include to qman_priv.h
  soc/qbman: Fix implicit header dependency now causing build fails
  iommu: Remove trace-events include from iommu.h
  iommu: Remove pci.h include from trace/events/iommu.h
  arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops()
  ACPI/IORT: Fix CONFIG_IOMMU_API dependency
  iommu/vt-d: Don't print the failure message when booting non-kdump kernel
  iommu: Move report_iommu_fault() to iommu.c
  iommu: Include device.h in iommu.h
  x86, iommu/vt-d: Add an option to disable Intel IOMMU force on
  iommu/arm-smmu: Return IOVA in iova_to_phys when SMMU is bypassed
  iommu/arm-smmu: Correct sid to mask
  iommu/amd: Fix incorrect error handling in amd_iommu_bind_pasid()
  iommu: Make iommu_bus_notifier return NOTIFY_DONE rather than error code
  omap3isp: Remove iommu_group related code
  iommu/omap: Add iommu-group support
  iommu/omap: Make use of 'struct iommu_device'
  iommu/omap: Store iommu_dev pointer in arch_data
  iommu/omap: Move data structures to omap-iommu.h
  iommu/omap: Drop legacy-style device support
  ...

syzkaller found a way to trigger double frees from ip_mc_drop_socket()

It turns out that leave a copy of parent mc_list at accept() time,
which is very bad.

Very similar to commit 8b485ce6 ("tcp: do not inherit
fastopen_req from parent")

Initial report from Pray3r, completed by Andrey one.
Thanks a lot to them !
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Pray3r <pray3r.z@gmail.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When any of the functions contained in NGbzero.S and GENbzero.S
vector through *bzero_from_clear_user, we may end up taking a
fault when executing one of the store alternate address space
instructions. If this happens, the exception handler does not
restore the %asi register.

This commit fixes the issue by introducing a new exception
handler that ensures the %asi register is restored when
a fault is handled.

Orabug: 25577560
Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com>
Reviewed-by: Rob Gardner <rob.gardner@oracle.com>
Reviewed-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use memdup_user_nul() helper instead of open-coding to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull ARC updates from Vineet Gupta:

 - AXS10x platform clk updates for I2S, PGU

 - add region based cache flush operation for ARCv2 cores

 - enforce PAE40 dependency on HIGHMEM

 - ptrace support for additional regs in ARCv2 cores

 - fix build failure in linux-next dut to a header include ordering
   change

* tag 'arc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  Revert "ARCv2: Allow enabling PAE40 w/o HIGHMEM"
  ARC: mm: fix build failure in linux-next for UP builds
  ARCv2: ptrace: provide regset for accumulator/r30 regs
  elf: Add ARCv2 specific core note section
  ARCv2: mm: micro-optimize region flush generated code
  ARCv2: mm: Merge 2 updates to DC_CTRL for region flush
  ARCv2: mm: Implement cache region flush operations
  ARC: mm: Move full_page computation into cache version agnostic wrapper
  arc: axs10x: Fix ARC PGU default clock frequency
  arc: axs10x: Add DT bindings for I2S audio playback

Pull ARM 64-bit DT updates from Olof Johansson:
 "Device-tree updates for arm64 platforms. Just as with 32-bit, a bunch
  of smaller changes, but also some new platforms that are worth
  mentioning:

   - Rockchip RK3399 platforms for Chromebooks, including Samsung
     Chromebook Plus (Kevin)

   - Orange Pi PC2 (Allwinner H5)

   - Freescale LS2088A and LS1088A SoCs

   - Expanded support for Nvidia Tegra186 (and Jetson TX2)"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (180 commits)
  arm64: dts: Add basic DT to support Spreadtrum's SP9860G
  arm64: dts: exynos: Use - instead of @ for DT OPP entries
  arm64: dts: exynos: Add support for s6e3hf2 panel device on TM2e board
  arm64: dts: juno: add information about L1 and L2 caches
  arm64: dts: juno: fix few unit address format warnings
  arm64: marvell: dts: enable the crypto engine on the Armada 8040 DB
  arm64: marvell: dts: enable the crypto engine on the Armada 7040 DB
  arm64: marvell: dts: add crypto engine description for 7k/8k
  arm64: dts: marvell: add sdhci support for Armada 7K/8K
  arm64: dts: marvell: add eMMC support for Armada 37xx
  arm64: dts: hisi: add pinctrl dtsi file for HiKey960 development board
  arm64: dts: hisi: add drive strength levels of the pins for Hi3660 SoC
  arm64: dts: hisi: enable the NIC and SAS for the hip07-d05 board
  arm64: dts: hisi: add SAS nodes for the hip07 SoC
  arm64: dts: hisi: add RoCE nodes for the hip07 SoC
  arm64: dts: hisi: add network related nodes for the hip07 SoC
  arm64: dts: hisi: add mbigen nodes for the hip07 SoC
  arm64: dts: rockchip: fix the memory size of PX5 Evaluation board
  arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board
  dt-bindings: arm: hisilicon: add bindings for hi3798cv200 SoC and Poplar board
  ...

Pull ARM SoC 64-bit changes from Olof Johansson:
 "Changes to platform code for 64-bit ARM platforms.

  Most of these are small changes to the one defconfig we use on arm64
  (no per-platform configs there), to enable new drivers.

  There are also a few other changes. Broadcom sold off their 'Vulcan'
  design to Cavium, where it is now called ThunderX2. While we normally
  don't rename stuff based on marketing's whims, it seemed appropriate
  to bring in renames on a few things such as MAINTAINERS, etc"

* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: sunxi: always enable reset controller
  arm64: defconfig: enable the Safexcel crypto engine as a module
  arm64: configs: enable SDHCI driver for Xenon
  MAINTAINERS: Broadcom Vulcan is now Cavium ThunderX2
  arm64: defconfig: add Allwinner USB PHY
  arm64: defconfig: enable MVPP2
  arm64: defconfig: Enable video, DRM and LPASS drivers for Exynos5433 and Exynos7
  arm64: exynos: Enable Exynos PMU and PM domains drivers
  arm64: only select PINCTRL for Allwinner platforms
  arm64: set CONFIG_MMC_BCM2835=y in defconfig
  arm64: defconfig: enable I2C_PXA
  arm64: defconfig: enable MVNETA
  ARM64: defconfig: enable the leds-pwm driver and default-on trigger
  arm64: defconfig: Enable SH Mobile I2C controller

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for ARM SoCs:

  Reset subsystem, merged through arm-soc by tradition:
   - Make bool drivers explicitly non-modular
   - New support for i.MX7 and Arria10 reset controllers

  PATA driver for Palmchip BK371 (acked by Tejun)

  Power domain drivers for i.MX (GPC, GPCv2)
   - Moved out of mach-imx for GPC
   - Bunch of tweaks, fixes, etc

  PMC support for Tegra186

  SoC detection support for Renesas RZ/G1H and RZ/G1N

  Move Tegra flow controller driver from mach directory to drivers/soc
   - (Power management / CPU power driver)

  Misc smaller tweaks for other platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits)
  soc: pm-domain: Fix the mangled urls
  soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0
  soc: renesas: rcar-sysc: Add support for fixing up power area tables
  soc: renesas: Register SoC device early
  soc: imx: gpc: add workaround for i.MX6QP to the GPC PD driver
  dt-bindings: imx-gpc: add i.MX6 QuadPlus compatible
  soc: imx: gpc: add defines for domain index
  soc: imx: Add GPCv2 power gating driver
  dt-bindings: Add GPCv2 power gating driver
  ARM/clk: move the ICST library to drivers/clk
  ARM: plat-versatile: remove stale clock header
  ARM: keystone: Drop PM domain support for k2g
  soc: ti: Add ti_sci_pm_domains driver
  dt-bindings: Add TI SCI PM Domains
  PM / Domains: Do not check if simple providers have phandle cells
  PM / Domains: Add generic data pointer to genpd data struct
  soc/tegra: Add initial flowctrl support for Tegra132/210
  soc/tegra: flowctrl: Add basic platform driver
  soc/tegra: Move Tegra flowctrl driver
  ARM: tegra: Remove unnecessary inclusion of flowctrl header
  ...

Pull ARM: SoC defconfig updates from Olof Johansson:
 "We've traditionally kept defconfig updates in a separate branch, often
  to encourage submaintainers to handle those patches separately to
  avoid conflicts on the shared files. The amount of changes seem to be
  decreasing though, so we might rethink how we handle this going
  forward.

  There really isn't much to write about here. The bulk of changes here
  are enabling drivers for whatever platforms the hardware is found on
  (and multi-configs)"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (30 commits)
  multi_v7_defconfig: make Rockchip usb2-phy built-in
  ARM: omap2plus_defconfig: Enable droid 4 devices
  ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modules
  ARM: configs: aspeed: Add new drivers
  ARM: configs: aspeed: Update configs for BMC systems
  ARM: omap2plus_defconfig: Enable TI Ethernet PHY
  ARM: configs: Add new config fragment to change RAM start point
  ARM: configs: stm32: Add I2C support
  multi_v7_defconfig: make Rockchip DRM drivers built-in
  ARM: configs: stm32: Set CPU_V7M_NUM_IRQ to max value
  ARM: imx_v6_v7_defconfig: Select SMSC_PHY
  ARM: davinci_all_defconfig: convert to use libata PATA
  ARM: qcom_defconfig: Enable Qualcomm remoteproc and related drivers
  ARM: omap2plus_defconfig: enable ahci-dm816 module
  arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig
  ARM: bcm2835: Enable missing CMA settings for VC4 driver
  ARM: socfpga: updates for socfpga_defconfig
  ARM: imx_v6_v7_defconfig: Select hid-multitouchdriver
  ARM: imx_v6_v7_defconfig: Select max11801_ts touchscreen driver
  ARM: exynos_defconfig: Increase CONFIG_CMA_SIZE_MBYTES to 96
  ...

Pull ARM Device-tree updates from Olof Johansson:
 "Device-tree continues to see lots of updates. The majority of patches
  here are smaller changes for new hardware on existing platforms, and
  there are a few larger changes worth pointing out.

  Major new platforms:

   - Gemini has been ported to DT, so a handful of "new" platforms moved
     over from board files

   - Rockchip RK3288 support for Tinkerboard and Phytec phyCORE-RK3288
     SoM and RDK

   - A bunch of embedded platforms, several Linksys platforms, Synology
     DS116,

   - Motorola Droid4 (really old OMAP-based phone) support is added.

  Some refactorings, i.e. Allwinner H3/H5 support is commonalized.

  And lots of smaller changes, cleanups, etc. See shortlog for more
  description

  We're adding ability to cross-include DT files between arm and arm64,
  by creating appropriate links in the dt-include directory, and using
  arm/ and arm64/ as include prefixes. This will avoid other local hacks
  such as per-file links between the two arch trees (this broke for
  external mirroring of DT contents). Now they can just provide their
  own appropriate dt-include hierarcy per platform"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (349 commits)
  ARM: dts: exynos: Use - instead of @ for DT OPP entries
  arm: spear6xx: add DT description of the ADC on SPEAr600
  arm: spear6xx: remove unneeded pinctrl properties in spear600-evb
  arm: spear6xx: switch spear600-evb to the new flash partition DT binding
  arm: spear6xx: fix spaces in spear600-evb.dts
  arm: spear6xx: use node labels in spear600-evb.dts
  arm: spear6xx: add labels to various nodes in spear600.dtsi
  ARM: dts: vexpress: fix few unit address format warnings
  ARM: dts: at91: sama5d3_xplained: not all ADC channels are available
  ARM: dts: at91: sama5d3_xplained: fix ADC vref
  ARM: dts: at91: add envelope detector mux to the Axentia TSE-850
  ARM: dts: armada-38x: label USB and SATA nodes
  ARM: dts: imx6q-utilite-pro: add hpd gpio
  ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply
  ARM: dts: imx6qdl-sabresd: Set LDO regulator supply
  ARM: dts: imx: add Gateworks Ventana GW5903 support
  ARM: dts: i.MX25: add AIPS control registers
  ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators
  ARM: dts: imx7-colibri: remove 1.8V fixed regulator
  ARM: dts: imx7-colibri: allow to disable Ethernet rail
  ...

Pull ARM SoC platform updates from Olof Johansson:
 "SoC platform changes (arch/arm/mach-*). This merge window, the bulk is
  for a few platforms:

  Gemini:
   - Legacy platform that Linus Walleij has converted to multiplatform
     and DT, so a handful of various tweaks there, removal of some old
     stale support, etc.

  Atmel AT91:
   - Fixup of various power management related pieces
   - Move of SoC detection to a drivers/soc driver instead

  ST Micro STM32:
   - New SoC support: STM32H743

  TI platforms:
   - More driver support for Davinci (SATA in particular)
   - Removal of some old stale hwmod files (linkspace platform)

  Misc:
   - A couple of smaller patches for i.MX, sunxi, hisi"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits)
  ARM: davinci: Add clock for CPPI 4.1 DMA engine
  ARM: mxs: add support for I2SE Duckbill 2 boards
  MAINTAINERS: Update the Allwinner sunXi entry
  ARM: i.MX25: globally disable supervisor protect
  ARM: at91: move SoC detection to its own driver
  ARM: at91: pm: correct typo
  ARM: at91: pm: Remove at91_pm_set_standby
  ARM: at91: pm: Merge all at91sam9*_pm_init
  ARM: at91: pm: Tie the USB clock mask to the pmc
  ARM: at91: pm: Tie the memory controller type to the ramc id
  ARM: at91: pm: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.
  ARM: at91: pm: Simplify at91rm9200_standby
  ARM: at91: pm: Use struct at91_pm_data in pm_suspend.S
  ARM: at91: pm: Move global variables into at91_pm_data
  ARM: at91: pm: Move at91_ramc_read/write to pm.c
  ARM: at91: pm: Cleanup headers
  MAINTAINERS: Add memory drivers to AT91 entry
  MAINTAINERS: Update AT91 entry
  ARM: davinci: add pata_bk3710 libata driver support
  ARM: OMAP2+: mark omap_init_rng as __init
  ...

Pull misc ARM SoC fixes from Olof Johansson:
 "ARM SoC non-urgent fixes for merge window

  Smaller patches that didn't seem to find a home in other branches, and
  low-priority fixes from late in the merge window. A number of these
  are MAINTAINER updates, it seems.

  Highlights:

   * Maintainers:
     - Remove Alexandre Courbot and Stephen Warren from Tegra
       maintainership, add Jon Hunter
     - Remove Stephen Warren and add Stefan Wahren to bcm2835
     - Tweaks for file flagging for Marvell Dove

   * Fixes:
     - For two non-common-clk platform, handle clk_disable with NULL arg
     - Remove redundant Kconfig select for Oxnas"

* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: mmp: let clk_disable() return immediately if clk is NULL
  ARM: w90x900: let clk_disable() return immediately if clk is NULL
  MAINTAINERS: Add file patterns for dove device tree bindings
  ARM: oxnas: remove redundant select CPU_V6K
  MAINTAINERS: tegra: Remove self as maintainer
  MAINTAINERS: tegra: Replace Stephen with Jon
  MAINTAINERS: Add Stefan Wahren to bcm2835.
  MAINTAINERS: remove swarren from bcm2835
  MAINTAINERS: Add Jon Mason to BCM5301X maintainers

Pull misc vfs updates from Al Viro:
 "Assorted bits and pieces from various people. No common topic in this
  pile, sorry"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs/affs: add rename exchange
  fs/affs: add rename2 to prepare multiple methods
  Make stat/lstat/fstatat pass AT_NO_AUTOMOUNT to vfs_statx()
  fs: don't set *REFERENCED on single use objects
  fs: compat: Remove warning from COMPATIBLE_IOCTL
  remove pointless extern of atime_need_update_rcu()
  fs: completely ignore unknown open flags
  fs: add a VALID_OPEN_FLAGS
  fs: remove _submit_bh()
  fs: constify tree_descr arrays passed to simple_fill_super()
  fs: drop duplicate header percpu-rwsem.h
  fs/affs: bugfix: Write files greater than page size on OFS
  fs/affs: bugfix: enable writes on OFS disks
  fs/affs: remove node generation check
  fs/affs: import amigaffs.h
  fs/affs: bugfix: make symbolic links work again

Pull vfs fix from Al Viro:
 "Braino fix for iov_iter_revert() misuse"

* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix braino in generic_file_read_iter()

We fixed the bugs in it, but it's still an ugly interface, so let's see
if anybody actually depends on it.  It's entirely possible that nothing
actually requires the whole "punch through read-only mappings"
semantics.

For example, gdb definitely uses the /proc/<pid>/mem interface, but it
looks like it mainly does it for regular reads of the target (that don't
need FOLL_FORCE), and looking at the gdb source code seems to fall back
on the traditional ptrace(PTRACE_POKEDATA) interface if it needs to.

If this breaks something, I do have a (more complex) version that only
enables FOLL_FORCE when somebody has PTRACE_ATTACH'ed to the target,
like the comment here used to say ("Maybe we should limit FOLL_FORCE to
actual ptrace users?").

Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Yuval Mintz says:

====================
qed*: General fixes

This series contain several fixes for qed and qede.

 - #1 [and ~#5] relate to XDP cleanups
 - #2 and #5 correct VF behavior
 - #3 and #4 fix and add missing configurations needed for RoCE & storage
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

PFs and VFs share the same structure of NDOs today,
and the VFs explicitly fails the ndo_xdp() callback stating
it doesn't support XDP.

This results in lots of:

  [qede_xdp:1032(enp131s2)]VFs don't support XDP
  ------------[ cut here ]------------
  WARNING: CPU: 4 PID: 1426 at net/core/rtnetlink.c:1637 rtnl_dump_ifinfo+0x354/0x3c0
  ...
  Call Trace:
    ? __alloc_skb+0x9b/0x1d0
    netlink_dump+0x122/0x290
    netlink_recvmsg+0x27d/0x430
    sock_recvmsg+0x3d/0x50
  ...

As every dump request for the VF interface info would fail due to
rtnl_xdp_fill() returning an error code.

To resolve this, introduce a subset of the NDOs meant for the VF
in a seperate structure and register that one instead for VFs,
and omit the ndo_xdp initialization.

Fixes: 40b8c454 ("qede: Prevent VFs from using XDP")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When configuring the doorbell DPI address, driver aligns the start
address to 4KB [HW-pages] instead of host PAGE_SIZE.
As a result, RoCE applications might receive addresses which are
unaligned to pages [when PAGE_SIZE > 4KB], which is a security risk.

Fixes: 51ff1725 ("qed: Add support for RoCE hw init")
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver doesn't pass the number of tasks to the QM init logic
which would cause back-pressure in scenarios requiring many tasks
[E.g., using max MRs] and thus reduced performance.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After previos changes in HW-stop scheme, VFs stopped sending CLOSE
messages to their PFs when they unload.

Fixes: 1226337a ("qed: Correct HW stop flow")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When (re|un)loading, Tx-queues belonging to XDP would not get freed.

Fixes: cb6aeb07 ("qede: Add support for XDP_TX")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tariq Toukan says:

====================
mlx4 misc fixes

This patchset contains misc bug fixes from the team
to the mlx4 Core and Eth drivers.

Series generated against net commit:
32f1bc0f Revert "ipv4: restore rt->fi for reference counting"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Under SRIOV resource management, extra counters are allocated to VFs
from a free pool. If that pool is empty, the ALLOC_RES command for
a counter resource fails -- and this generates a misleading error
message in the message log.

Under SRIOV, each VF is allocated (i.e., guaranteed) 2 counters --
one counter per port. For ETH ports, the RoCE driver requests an
additional counter (above the guaranteed counters). If that request
fails, the VF RoCE driver simply uses the default (i.e., guaranteed)
counter for that port.

Thus, failing to allocate an additional counter does not constitute
a  problem, and the error message on the PF when this occurs should
be reduced to debug level.

Finally, to identify the situation that the reason for the failure is
that no resources are available to grant to the VF, we modified the
error returned by mlx4_grant_resource to -EDQUOT (Quota exceeded),
which more accurately describes the error.

Fixes: c3abb51b ("IB/mlx4: Add RoCE/IB dedicated counters")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Inserting steering rules with illegal ring is an invalid operation,
block it.

Fixes: 82067281 ('net/mlx4_en: Manage flow steering rules with ethtool')
Signed-off-by: Talat Batheesh <talatb@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The error print within mlx4_en_calc_rx_buf() should be a debug print.

Fixes: 51151a16 ('mlx4: allow order-0 memory allocations in RX path')
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>