Verifier log position reset is meaningless in BPF_LOG_KERNEL mode, so
just exit early in bpf_vlog_reset() if log->level is BPF_LOG_KERNEL.

This avoid meaningless put_user() into NULL log->ubuf.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-8-andrii@kernel.org

Add selftests validating BPF_LOG_FIXED behavior, which used to be the
only behavior, and now default rotating BPF verifier log, which returns
just up to last N bytes of full verifier log, instead of returning
-ENOSPC.

To stress test correctness of in-kernel verifier log logic, we force it
to truncate program's verifier log to all lengths from 1 all the way to
its full size (about 450 bytes today). This was a useful stress test
while developing the feature.

For both fixed and rotating log modes we expect -ENOSPC if log contents
doesn't fit in user-supplied log buffer.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-7-andrii@kernel.org

Add --log-size to be able to customize log buffer sent to bpf() syscall
for BPF program verification logging.

Add --log-fixed to enforce BPF_LOG_FIXED behavior for BPF verifier log.
This is useful in unlikely event that beginning of truncated verifier
log is more important than the end of it (which with rotating verifier
log behavior is the default now).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230406234205.323208-6-andrii@kernel.org

This basically prevents any forward compatibility. And we either way
just return -EINVAL, which would otherwise be returned from bpf()
syscall anyways.

Similarly, drop enforcement of non-NULL log_buf when log_level > 0. This
won't be true anymore soon.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-5-andrii@kernel.org

Currently, if user-supplied log buffer to collect BPF verifier log turns
out to be too small to contain full log, bpf() syscall returns -ENOSPC,
fails BPF program verification/load, and preserves first N-1 bytes of
the verifier log (where N is the size of user-supplied buffer).

This is problematic in a bunch of common scenarios, especially when
working with real-world BPF programs that tend to be pretty complex as
far as verification goes and require big log buffers. Typically, it's
when debugging tricky cases at log level 2 (verbose). Also, when BPF program
is successfully validated, log level 2 is the only way to actually see
verifier state progression and all the important details.

Even with log level 1, it's possible to get -ENOSPC even if the final
verifier log fits in log buffer, if there is a code path that's deep
enough to fill up entire log, even if normally it would be reset later
on (there is a logic to chop off successfully validated portions of BPF
verifier log).

In short, it's not always possible to pre-size log buffer. Also, what's
worse, in practice, the end of the log most often is way more important
than the beginning, but verifier stops emitting log as soon as initial
log buffer is filled up.

This patch switches BPF verifier log behavior to effectively behave as
rotating log. That is, if user-supplied log buffer turns out to be too
short, verifier will keep overwriting previously written log,
effectively treating user's log buffer as a ring buffer. -ENOSPC is
still going to be returned at the end, to notify user that log contents
was truncated, but the important last N bytes of the log would be
returned, which might be all that user really needs. This consistent
-ENOSPC behavior, regardless of rotating or fixed log behavior, allows
to prevent backwards compatibility breakage. The only user-visible
change is which portion of verifier log user ends up seeing *if buffer
is too small*. Given contents of verifier log itself is not an ABI,
there is no breakage due to this behavior change. Specialized tools that
rely on specific contents of verifier log in -ENOSPC scenario are
expected to be easily adapted to accommodate old and new behaviors.

Importantly, though, to preserve good user experience and not require
every user-space application to adopt to this new behavior, before
exiting to user-space verifier will rotate log (in place) to make it
start at the very beginning of user buffer as a continuous
zero-terminated string. The contents will be a chopped off N-1 last
bytes of full verifier log, of course.

Given beginning of log is sometimes important as well, we add
BPF_LOG_FIXED (which equals 8) flag to force old behavior, which allows
tools like veristat to request first part of verifier log, if necessary.
BPF_LOG_FIXED flag is also a simple and straightforward way to check if
BPF verifier supports rotating behavior.

On the implementation side, conceptually, it's all simple. We maintain
64-bit logical start and end positions. If we need to truncate the log,
start position will be adjusted accordingly to lag end position by
N bytes. We then use those logical positions to calculate their matching
actual positions in user buffer and handle wrap around the end of the
buffer properly. Finally, right before returning from bpf_check(), we
rotate user log buffer contents in-place as necessary, to make log
contents contiguous. See comments in relevant functions for details.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-4-andrii@kernel.org

It's not clear why we have 128 as minimum size, but it makes testing
harder and seems unnecessary, as we carefully handle truncation
scenarios and use proper snprintf variants. So remove this limitation
and just enforce positive length for log buffer.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-3-andrii@kernel.org

kernel/bpf/verifier.c file is large and growing larger all the time. So
it's good to start splitting off more or less self-contained parts into
separate files to keep source code size (somewhat) somewhat under
control.

This patch is a one step in this direction, moving some of BPF verifier log
routines into a separate kernel/bpf/log.c. Right now it's most low-level
and isolated routines to append data to log, reset log to previous
position, etc. Eventually we could probably move verifier state
printing logic here as well, but this patch doesn't attempt to do that
yet.

Subsequent patches will add more logic to verifier log management, so
having basics in a separate file will make sure verifier.c doesn't grow
more with new changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-2-andrii@kernel.org

There is an extra whitespace in the SPDX tag, before the license name,
in the script for generating man pages for the bpf() syscall and the
helpers. It has caused problems in Debian packaging, in the tool that
autodetects licenses. Let's clean it up.

Fixes: 5cb62b75 ("bpf, docs: Use SPDX license identifier in bpf_doc.py")
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230411144747.66734-1-quentin@isovalent.com

When trying to add a name to the hashmap, an error code of EEXIST is
returned and we continue as names are possibly duplicated in the sys
file.

If the last name in the file is a duplicate, we will continue to the
next iteration of the while loop, and exit the loop with a value of err
set to EEXIST and enter the error label with err set, which causes the
test to fail when it should not.

This change reset err to 0 before continue-ing into the next iteration,
this way, if there is no more data to read from the file we iterate
through, err will be set to 0.

Behaviour prior to this change:
```
test_kprobe_multi_bench_attach:FAIL:get_syms unexpected error: -17
(errno 2)

All error logs:
test_kprobe_multi_bench_attach:FAIL:get_syms unexpected error: -17
(errno 2)
Summary: 0/1 PASSED, 0 SKIPPED, 1 FAILED
```

After this change:
```
Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED
```
Signed-off-by: Manu Bretelle <chantr4@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230408022919.54601-1-chantr4@gmail.com

The following example forces veristat to loop indefinitely:

$ cat two-ok
file_name,prog_name,verdict,total_states
file-a,a,success,12
file-b,b,success,67

$ cat add-failure
file_name,prog_name,verdict,total_states
file-a,a,success,12
file-b,b,success,67
file-b,c,failure,32

$ veristat -C two-ok add-failure
  <does not return>

The loop is caused by handle_comparison_mode() not checking if `base`
variable points to `fallback_stats` prior advancing joined results
using `base`.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230407154125.896927-1-eddyz87@gmail.com

After commit d6e6286a ("libbpf: disassociate section handler on explicit
bpf_program__set_type() call"), bpf_program__set_type() will force cleanup
the program's SEC() definition, this commit fixed the test helper but missed
the bpftool, which leads to bpftool prog autoattach broken as follows:

  $ bpftool prog load spi-xfer-r1v1.o /sys/fs/bpf/test autoattach
  Program spi_xfer_r1v1 does not support autoattach, falling back to pinning

This patch fix bpftool to set program type only if it differs.

Fixes: d6e6286a ("libbpf: disassociate section handler on explicit bpf_program__set_type() call")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230407081427.2621590-1-weiyongjun@huaweicloud.com

perf_event with type=PERF_TYPE_RAW and config=0x1b00 turned out to be not
reliable in ensuring LBR is active. Thus, test_progs:get_branch_snapshot is
not reliable in some systems. Replace it with PERF_COUNT_HW_CPU_CYCLES
event, which gives more consistent results.
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230407190130.2093736-1-song@kernel.org

BPF helpers that take an ARG_PTR_TO_UNINIT_MEM must ensure that all of
the memory is set, including beyond the end of the string.
Signed-off-by: Barret Rhoden <brho@google.com>
Link: https://lore.kernel.org/r/20230407001808.1622968-1-brho@google.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Yonghong Song says:

====================

LLVM commit [1] introduced hoistMinMax optimization like
  (i < VIRTIO_MAX_SGS) && (i < out_sgs)
to
  upper = MIN(VIRTIO_MAX_SGS, out_sgs)
  ... i < upper ...
and caused the verification failure. Commit [2] workarounded the issue by
adding some bpf assembly code to prohibit the above optimization.
This patch improved verifier such that verification can succeed without
the above workaround.

Without [2], the current verifier will hit the following failures:
  ...
  119: (15) if r1 == 0x0 goto pc+1
  The sequence of 8193 jumps is too complex.
  verification time 525829 usec
  stack depth 64
  processed 156616 insns (limit 1000000) max_states_per_insn 8 total_states 1754 peak_states 1712 mark_read 12
  -- END PROG LOAD LOG --
  libbpf: prog 'trace_virtqueue_add_sgs': failed to load: -14
  libbpf: failed to load object 'loop6.bpf.o'
  ...
The failure is due to verifier inadequately handling '<const> <cond_op> <non_const>' which will
go through both pathes and generate the following verificaiton states:
  ...
  89: (07) r2 += 1                      ; R2_w=5
  90: (79) r8 = *(u64 *)(r10 -48)       ; R8_w=scalar() R10=fp0
  91: (79) r1 = *(u64 *)(r10 -56)       ; R1_w=scalar(umax=5,var_off=(0x0; 0x7)) R10=fp0
  92: (ad) if r2 < r1 goto pc+41        ; R0_w=scalar() R1_w=scalar(umin=6,umax=5,var_off=(0x4; 0x3))
      R2_w=5 R6_w=scalar(id=385) R7_w=0 R8_w=scalar() R9_w=scalar(umax=21474836475,var_off=(0x0; 0x7ffffffff))
      R10=fp0 fp-8=mmmmmmmm fp-16=mmmmmmmm fp-24=mmmm???? fp-32= fp-40_w=4 fp-48=mmmmmmmm fp-56= fp-64=mmmmmmmm
  ...
  89: (07) r2 += 1                      ; R2_w=6
  90: (79) r8 = *(u64 *)(r10 -48)       ; R8_w=scalar() R10=fp0
  91: (79) r1 = *(u64 *)(r10 -56)       ; R1_w=scalar(umax=5,var_off=(0x0; 0x7)) R10=fp0
  92: (ad) if r2 < r1 goto pc+41        ; R0_w=scalar() R1_w=scalar(umin=7,umax=5,var_off=(0x4; 0x3))
      R2_w=6 R6=scalar(id=388) R7=0 R8_w=scalar() R9_w=scalar(umax=25769803770,var_off=(0x0; 0x7ffffffff))
      R10=fp0 fp-8=mmmmmmmm fp-16=mmmmmmmm fp-24=mmmm???? fp-32= fp-40=5 fp-48=mmmmmmmm fp-56= fp-64=mmmmmmmm
    ...
  89: (07) r2 += 1                      ; R2_w=4088
  90: (79) r8 = *(u64 *)(r10 -48)       ; R8_w=scalar() R10=fp0
  91: (79) r1 = *(u64 *)(r10 -56)       ; R1_w=scalar(umax=5,var_off=(0x0; 0x7)) R10=fp0
  92: (ad) if r2 < r1 goto pc+41        ; R0=scalar() R1=scalar(umin=4089,umax=5,var_off=(0x0; 0x7))
      R2=4088 R6=scalar(id=12634) R7=0 R8=scalar() R9=scalar(umax=17557826301960,var_off=(0x0; 0xfffffffffff))
      R10=fp0 fp-8=mmmmmmmm fp-16=mmmmmmmm fp-24=mmmm???? fp-32= fp-40=4087 fp-48=mmmmmmmm fp-56= fp-64=mmmmmmmm

Patch 3 fixed the above issue by handling '<const> <cond_op> <non_const>' properly.
During developing selftests for Patch 3, I found some issues with bound deduction with
BPF_EQ/BPF_NE and fixed the issue in Patch 1.

After the above issue is fixed, the second issue shows up.
  ...
  67: (07) r1 += -16                    ; R1_w=fp-16
  ; bpf_probe_read_kernel(&sgp, sizeof(sgp), sgs + i);
  68: (b4) w2 = 8                       ; R2_w=8
  69: (85) call bpf_probe_read_kernel#113       ; R0_w=scalar() fp-16=mmmmmmmm
  ; return sgp;
  70: (79) r6 = *(u64 *)(r10 -16)       ; R6=scalar() R10=fp0
  ; for (n = 0, sgp = get_sgp(sgs, i); sgp && (n < SG_MAX);
  71: (15) if r6 == 0x0 goto pc-49      ; R6=scalar()
  72: (b4) w1 = 0                       ; R1_w=0
  73: (05) goto pc-46
  ; for (i = 0; (i < VIRTIO_MAX_SGS) && (i < out_sgs); i++) {
  28: (bc) w7 = w1                      ; R1_w=0 R7_w=0
  ; bpf_probe_read_kernel(&len, sizeof(len), &sgp->length);
  ...
  23: (79) r3 = *(u64 *)(r10 -40)       ; R3_w=2 R10=fp0
  ; for (i = 0; (i < VIRTIO_MAX_SGS) && (i < out_sgs); i++) {
  24: (07) r3 += 1                      ; R3_w=3
  ; for (i = 0; (i < VIRTIO_MAX_SGS) && (i < out_sgs); i++) {
  25: (79) r1 = *(u64 *)(r10 -56)       ; R1_w=scalar(umax=5,var_off=(0x0; 0x7)) R10=fp0
  26: (ad) if r3 < r1 goto pc+34 61: R0=scalar() R1_w=scalar(umin=4,umax=5,var_off=(0x4; 0x1)) R3_w=3 R6=scalar(id=1658)
     R7=0 R8=scalar(id=1653) R9=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 fp-8=mmmmmmmm fp-16=mmmmmmmm
     fp-24=mmmm???? fp-32= fp-40=2 fp-56= fp-64=mmmmmmmm
  ; if (sg_is_chain(&sg))
  61: (7b) *(u64 *)(r10 -40) = r3       ; R3_w=3 R10=fp0 fp-40_w=3
    ...
  67: (07) r1 += -16                    ; R1_w=fp-16
  ; bpf_probe_read_kernel(&sgp, sizeof(sgp), sgs + i);
  68: (b4) w2 = 8                       ; R2_w=8
  69: (85) call bpf_probe_read_kernel#113       ; R0_w=scalar() fp-16=mmmmmmmm
  ; return sgp;
  70: (79) r6 = *(u64 *)(r10 -16)
  ; for (n = 0, sgp = get_sgp(sgs, i); sgp && (n < SG_MAX);
  infinite loop detected at insn 71
  verification time 90800 usec
  stack depth 64
  processed 25017 insns (limit 1000000) max_states_per_insn 20 total_states 491 peak_states 169 mark_read 12
  -- END PROG LOAD LOG --
  libbpf: prog 'trace_virtqueue_add_sgs': failed to load: -22

Further analysis found the index variable 'i' is spilled but since it is not marked as precise.
This is more tricky as identifying induction variable is not easy in verifier. Although a heuristic
is possible, let us leave it for now.

  [1] https://reviews.llvm.org/D143726
  [2] Commit 3c2611ba ("selftests/bpf: Fix trace_virtqueue_add_sgs test issue with LLVM 17.")
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add various tests for code pattern '<const> <cond_op> <non_const>' to
exercise the previous verifier patch.

The following are veristat changed number of processed insns stat
comparing the previous patch vs. this patch:

File                                                   Program                                               Insns (A)  Insns (B)  Insns  (DIFF)
-----------------------------------------------------  ----------------------------------------------------  ---------  ---------  -------------
test_seg6_loop.bpf.linked3.o                           __add_egr_x                                               12423      12314  -109 (-0.88%)

Only one program is affected with minor change.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230406164510.1047757-1-yhs@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Currently, the verifier does not handle '<const> <cond_op> <non_const>' well.
For example,
  ...
  10: (79) r1 = *(u64 *)(r10 -16)       ; R1_w=scalar() R10=fp0
  11: (b7) r2 = 0                       ; R2_w=0
  12: (2d) if r2 > r1 goto pc+2
  13: (b7) r0 = 0
  14: (95) exit
  15: (65) if r1 s> 0x1 goto pc+3
  16: (0f) r0 += r1
  ...
At insn 12, verifier decides both true and false branch are possible, but
actually only false branch is possible.

Currently, the verifier already supports patterns '<non_const> <cond_op> <const>.
Add support for patterns '<const> <cond_op> <non_const>' in a similar way.

Also fix selftest 'verifier_bounds_mix_sign_unsign/bounds checks mixing signed and unsigned, variant 10'
due to this change.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230406164505.1046801-1-yhs@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Add various tests for code pattern '<non-const> NE/EQ <const>' implemented
in the previous verifier patch. Without the verifier patch, these new
tests will fail.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230406164500.1045715-1-yhs@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Currently, for BPF_JEQ/BPF_JNE insn, verifier determines
whether the branch is taken or not only if both operands
are constants. Therefore, for the following code snippet,
  0: (85) call bpf_ktime_get_ns#5       ; R0_w=scalar()
  1: (a5) if r0 < 0x3 goto pc+2         ; R0_w=scalar(umin=3)
  2: (b7) r2 = 2                        ; R2_w=2
  3: (1d) if r0 == r2 goto pc+2 6

At insn 3, since r0 is not a constant, verifier assumes both branch
can be taken which may lead inproper verification failure.

Add comparing umin/umax value and the constant. If the umin value
is greater than the constant, or umax value is smaller than the constant,
for JEQ the branch must be not-taken, and for JNE the branch must be taken.
The jmp32 mode JEQ/JNE branch taken checking is also handled similarly.

The following lists the veristat result w.r.t. changed number
of processes insns during verification:

File                                                   Program                                               Insns (A)  Insns (B)  Insns    (DIFF)
-----------------------------------------------------  ----------------------------------------------------  ---------  ---------  ---------------
test_cls_redirect.bpf.linked3.o                        cls_redirect                                              64980      73472  +8492 (+13.07%)
test_seg6_loop.bpf.linked3.o                           __add_egr_x                                               12425      12423      -2 (-0.02%)
test_tcp_hdr_options.bpf.linked3.o                     estab                                                      2634       2558     -76 (-2.89%)
test_parse_tcp_hdr_opt.bpf.linked3.o                   xdp_ingress_v6                                             1421       1420      -1 (-0.07%)
test_parse_tcp_hdr_opt_dynptr.bpf.linked3.o            xdp_ingress_v6                                             1238       1237      -1 (-0.08%)
test_tc_dtime.bpf.linked3.o                            egress_fwdns_prio100                                        414        411      -3 (-0.72%)

Mostly a small improvement but test_cls_redirect.bpf.linked3.o has a 13% regression.
I checked with verifier log and found it this is due to pruning.
For some JEQ/JNE branches impacted by this patch,
one branch is explored and the other has state equivalence and
pruned.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230406164455.1045294-1-yhs@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Kal Conley says:

====================

This patchset includes the test with the bugfix as requested here:
https://lore.kernel.org/all/f1a32d5a-03e7-fce1-f5a5-6095f365f0a9@linux.dev/

Patch #1 (the bugfix) is identical to the previous submission except
that I improved the commit message slightly.

Magnus: I improved the test code a little different than you asked
since I thought this was a little simpler than having a separate
function for now. Hopefully, you can live with this :-).
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Add unaligned descriptor test for frame size of 4001. Using an odd frame
size ensures that the end of the UMEM is not near a page boundary. This
allows testing descriptors that staddle the end of the UMEM but not a
page.

This test used to fail without the previous commit ("xsk: Fix unaligned
descriptor validation").
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Link: https://lore.kernel.org/r/20230405235920.7305-3-kal.conley@dectris.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Make sure unaligned descriptors that straddle the end of the UMEM are
considered invalid. Currently, descriptor validation is broken for
zero-copy mode which only checks descriptors at page granularity.
For example, descriptors in zero-copy mode that overrun the end of the
UMEM but not a page boundary are (incorrectly) considered valid. The
UMEM boundary check needs to happen before the page boundary and
contiguity checks in xp_desc_crosses_non_contig_pg(). Do this check in
xp_unaligned_validate_desc() instead like xp_check_unaligned() already
does.

Fixes: 2b43470a ("xsk: Introduce AF_XDP buffer allocation API")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230405235920.7305-2-kal.conley@dectris.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Functions for searching module kallsyms should have non-empty
definitions only if CONFIG_MODULES=y and CONFIG_KALLSYMS=y. Until now,
only CONFIG_MODULES check was used for many of these, which may have
caused complilation errors on some configs.

This patch moves all relevant functions under the correct configs.

Fixes: bd5314f8 ("kallsyms, bpf: Move find_kallsyms_symbol_value out of internal header")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303181535.RFDCnz3E-lkp@intel.com/
Link: https://lore.kernel.org/r/20230330102001.2183693-1-vmalik@redhat.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Quentin Monnet says:

====================

This set contains some improvements for bpftool's "visual" program dump
option, which produces the control flow graph in a DOT format. The main
objective is to add support for inline annotations on such graphs, so that
we can have the C source code for the program showing up alongside the
instructions, when available. The last commits also make it possible to
display the line numbers or the bare opcodes in the graph, as supported by
regular program dumps.

v3:
- Fixed formatting of DOT graph: escape spaces, and remove indent that
  would cause some unwanted spaces to show up in the resulting graph.
- Don't print line information if the record is empty.
- Add '<' and ' ' to the list of escaped characters for generting the
  DOT graph.
- Truncate long file paths, use shorter field names ("line", "col") for
  code location information in the graph, add missing separator space.
- Add a commit to return an error if JSON output and CFG are both
  required.
- Add a drive-by, clean up commit for bash completion (avoid unnecessary
  calls to _bpftool_once_attr()).

v2: Replace fputc(..., stdout) with putchar(...) in dotlabel_puts().
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

In bpftool's bash completion file, function _bpftool_once_attr() is able
to process multiple arguments. There are a few locations where this
function is called multiple times in a row, each time for a single
argument; let's pass all arguments instead to minimize the number of
function calls required for the completion.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-8-quentin@isovalent.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Add support for displaying opcodes or/and file references (filepath,
line and column numbers) when dumping the control flow graphs of loaded
BPF programs with bpftool.

The filepaths in the records are absolute. To avoid blocks on the graph
to get too wide, we truncate them when they get too long (but we always
keep the entire file name). In the unlikely case where the resulting
file name is ambiguous, it remains possible to get the full path with a
regular dump (no CFG).
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-7-quentin@isovalent.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

When dumping a program, the keywords "opcodes" (for printing the raw
opcodes), "linum" (for displaying the filename, line number, column
number along with the source code), and "visual" (for generating the
control flow graph for translated programs) are mutually exclusive. But
there's no reason why they should be. Let's make it possible to pass
several of them at once. The "file FILE" option, which makes bpftool
output a binary image to a file, remains incompatible with the others.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-6-quentin@isovalent.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

We do not support JSON output for control flow graphs of programs with
bpftool. So far, requiring both the CFG and JSON output would result in
producing a null JSON object. It makes more sense to raise an error
directly when parsing command line arguments and options, so that users
know they won't get any output they might expect.

If JSON is required for the graph, we leave it to Graphviz instead:

    # bpftool prog dump xlated <REF> visual | dot -Tjson
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-5-quentin@isovalent.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

We support dumping the control flow graph of loaded programs to the DOT
format with bpftool, but so far this feature wouldn't display the source
code lines available through BTF along with the eBPF bytecode. Let's add
support for these annotations, to make it easier to read the graph.

In prog.c, we move the call to dump_xlated_cfg() in order to pass and
use the full struct dump_data, instead of creating a minimal one in
draw_bb_node().

We pass the pointer to this struct down to dump_xlated_for_graph() in
xlated_dumper.c, where most of the logics is added. We deal with BTF
mostly like we do for plain or JSON output, except that we cannot use a
"nr_skip" value to skip a given number of linfo records (we don't
process the BPF instructions linearly, and apart from the root of the
graph we don't know how many records we should skip, so we just store
the last linfo and make sure the new one we find is different before
printing it).

When printing the source instructions to the label of a DOT graph node,
there are a few subtleties to address. We want some special newline
markers, and there are some characters that we must escape. To deal with
them, we introduce a new dedicated function btf_dump_linfo_dotlabel() in
btf_dumper.c. We'll reuse this function in a later commit to format the
filepath, line, and column references as well.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-4-quentin@isovalent.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

When dumping the control flow graphs for programs using the 16-byte long
load instruction, we need to skip the second part of this instruction
when looking for the next instruction to process. Otherwise, we end up
printing "BUG_ld_00" from the kernel disassembler in the CFG.

Fixes: efcef17a ("tools: bpftool: generate .dot graph from CFG information")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-3-quentin@isovalent.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The documentation states that when line_info is available when dumping a
program, the source line will be displayed "by default". There is no
notion of "default" here: the line is always displayed if available,
there is no way currently to turn it off.

In the next sentence, the documentation states that if "linum" is used
on the command line, the relevant filename, line, and column will be
displayed "on top of the source line". This is incorrect, as they are
currently displayed on the right side of the source line (or on top of
the eBPF instruction, not the source).

This commit fixes the documentation to address these points.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-2-quentin@isovalent.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

In some cases the loopback latency might be large enough, causing
the assertion on invocations to be run before ingress prog getting
executed. The assertion would fail and the test would flake.

This can be reliably reproduced by arbitrarily increasing the
loopback latency (thanks to [1]):
  tc qdisc add dev lo root handle 1: htb default 12
  tc class add dev lo parent 1:1 classid 1:12 htb rate 20kbps ceil 20kbps
  tc qdisc add dev lo parent 1:12 netem delay 100ms

Fix this by waiting on the receive end, instead of instantly
returning to the assert. The call to read() will wait for the
default SO_RCVTIMEO timeout of 3 seconds provided by
start_server().

[1] https://gist.github.com/kstevens715/4598301Reported-by: Martin KaFai Lau <martin.lau@linux.dev>
Link: https://lore.kernel.org/bpf/9c5c8b7e-1d89-a3af-5400-14fde81f4429@linux.dev/
Fixes: 3573f384 ("selftests/bpf: Test CGROUP_STORAGE behavior on shared egress + ingress")
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Link: https://lore.kernel.org/r/20230405193354.1956209-1-zhuyifei@google.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Fix flaky STATS_RX_DROPPED test. The receiver calls getsockopt after
receiving the last (valid) packet which is not the final packet sent in
the test (valid and invalid packets are sent in alternating fashion with
the final packet being invalid). Since the last packet may or may not
have been dropped already, both outcomes must be allowed.

This issue could also be fixed by making sure the last packet sent is
valid. This alternative is left as an exercise to the reader (or the
benevolent maintainers of this file).

This problem was quite visible on certain setups. On one machine this
failure was observed 50% of the time.

Also, remove a redundant assignment of pkt_stream->nb_pkts. This field
is already initialized by __pkt_stream_alloc.

Fixes: 27e934be ("selftests: xsk: make stat tests not spin on getsockopt")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230403120400.31018-1-kal.conley@dectris.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

This change fixes flakiness in the BIDIRECTIONAL test:

    # [is_pkt_valid] expected length [60], got length [90]
    not ok 1 FAIL: SKB BUSY-POLL BIDIRECTIONAL

When IPv6 is enabled, the interface will periodically send MLDv1 and
MLDv2 packets. These packets can cause the BIDIRECTIONAL test to fail
since it uses VETH0 for RX.

For other tests, this was not a problem since they only receive on VETH1
and IPv6 was already disabled on VETH0.

Fixes: a8905257 ("selftests/bpf: Xsk selftests framework")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Link: https://lore.kernel.org/r/20230405082905.6303-1-kal.conley@dectris.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Kal Conley says:

====================

This patchset fixes a minor bug in xskxceiver.c then adds a test case
for valid packets at the end of the UMEM.
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Add test case to testapp_invalid_desc for valid packets at the end of
the UMEM.
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230403145047.33065-3-kal.conley@dectris.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Avoid UMEM_SIZE macro in testapp_invalid_desc which is incorrect when
the frame size is not XSK_UMEM__DEFAULT_FRAME_SIZE. Also remove the
macro since it's no longer being used.

Fixes: 909f0e28 ("selftests: xsk: Add tests for 2K frame size")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230403145047.33065-2-kal.conley@dectris.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

xskxceiver depends on xskxceiver.h so tell make about it.
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Link: https://lore.kernel.org/r/20230403130151.31195-1-kal.conley@dectris.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Artem reported suspicious RCU usage [1]. The reason is that verifier
calls find_kallsyms_symbol_value with preemption enabled which will
trigger suspicious RCU usage warning in rcu_dereference_sched call.

Disabling preemption in find_kallsyms_symbol_value and adding
__find_kallsyms_symbol_value function.

Fixes: 31bf1dbc ("bpf: Fix attaching fentry/fexit/fmod_ret/lsm to modules")
Reported-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Artem Savkov <asavkov@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/bpf/20230403220254.2191240-1-jolsa@kernel.org

[1] https://lore.kernel.org/bpf/ZBrPMkv8YVRiWwCR@samus.usersys.redhat.com/

Alexei Starovoitov says:

====================

From: Alexei Starovoitov <ast@kernel.org>

The patch set is addressing a fallout from
commit 6fcd486b ("bpf: Refactor RCU enforcement in the verifier.")
It was too aggressive with PTR_UNTRUSTED marks.
Patches 1-6 are cleanup and adding verifier smartness to address real
use cases in bpf programs that broke with too aggressive PTR_UNTRUSTED.
The partial revert is done in patch 7 anyway.
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

Add tracing tests for walking skb->sk and req->sk.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230404045029.82870-9-alexei.starovoitov@gmail.com