Skip to content

L
linux
Switch branch/tag
  1. 26 Apr, 2022 4 commits
    • Nathan Rossi's avatar
      net: dsa: mv88e6xxx: Fix port_hidden_wait to account for port_base_addr · 24cbdb91
      Nathan Rossi authored 
      The other port_hidden functions rely on the port_read/port_write
functions to access the hidden control port. These functions apply the
offset for port_base_addr where applicable. Update port_hidden_wait to
use the port_wait_bit so that port_base_addr offsets are accounted for
when waiting for the busy bit to change.

Without the offset the port_hidden_wait function would timeout on
devices that have a non-zero port_base_addr (e.g. MV88E6141), however
devices that have a zero port_base_addr would operate correctly (e.g.
MV88E6390).

Fixes: 60907013 ("net: dsa: mv88e6xxx: update code operating on hidden registers")
Signed-off-by: default avatarNathan Rossi <nathan@nathanrossi.com>
Reviewed-by: default avatarMarek Behún <kabel@kernel.org>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220425070454.348584-1-nathan@nathanrossi.comSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      24cbdb91
    • Baruch Siach's avatar
      net: phy: marvell10g: fix return value on error · 0ed9704b
      Baruch Siach authored 
      Return back the error value that we get from phy_read_mmd().

Fixes: c84786fa ("net: phy: marvell10g: read copper results from CSSR1")
Signed-off-by: default avatarBaruch Siach <baruch.siach@siklu.com>
Reviewed-by: default avatarMarek Behún <kabel@kernel.org>
Reviewed-by: default avatarRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/f47cb031aeae873bb008ba35001607304a171a20.1650868058.git.baruch@tkos.co.ilSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      0ed9704b
    • Jonathan Lemon's avatar
      net: bcmgenet: hide status block before TX timestamping · acac0541
      Jonathan Lemon authored 
      The hardware checksum offloading requires use of a transmit
status block inserted before the outgoing frame data, this was
updated in '9a9ba2a4 ("net: bcmgenet: always enable status blocks")'

However, skb_tx_timestamp() assumes that it is passed a raw frame
and PTP parsing chokes on this status block.

Fix this by calling __skb_pull(), which hides the TSB before calling
skb_tx_timestamp(), so an outgoing PTP packet is parsed correctly.

As the data in the skb has already been set up for DMA, and the
dma_unmap_* calls use a separately stored address, there is no
no effective change in the data transmission.
Signed-off-by: default avatarJonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220424165307.591145-1-jonathan.lemon@gmail.com
Fixes: d03825fb ("net: bcmgenet: add skb_tx_timestamp call")
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      acac0541
    • Lin Ma's avatar
      mctp: defer the kfree of object mdev->addrs · b561275d
      Lin Ma authored 
      The function mctp_unregister() reclaims the device's relevant resource
when a netcard detaches. However, a running routine may be unaware of
this and cause the use-after-free of the mdev->addrs object.

The race condition can be demonstrated below

 cleanup thread               another thread
                          |
unregister_netdev()       |  mctp_sendmsg()
...                       |    ...
  mctp_unregister()       |    rt = mctp_route_lookup()
    ...                   |    mctl_local_output()
    kfree(mdev->addrs)    |      ...
                          |      saddr = rt->dev->addrs[0];
                          |

An attacker can adopt the (recent provided) mtcpserial driver with pty
to fake the device detaching and use the userfaultfd to increase the
race success chance (in mctp_sendmsg). The KASan report for such a POC
is shown below:

[   86.051955] ==================================================================
[   86.051955] BUG: KASAN: use-after-free in mctp_local_output+0x4e9/0xb7d
[   86.051955] Read of size 1 at addr ffff888005f298c0 by task poc/295
[   86.051955]
[   86.051955] Call Trace:
[   86.051955]  <TASK>
[   86.051955]  dump_stack_lvl+0x33/0x42
[   86.051955]  print_report.cold.13+0xb2/0x6b3
[   86.051955]  ? preempt_schedule_irq+0x57/0x80
[   86.051955]  ? mctp_local_output+0x4e9/0xb7d
[   86.051955]  kasan_report+0xa5/0x120
[   86.051955]  ? mctp_local_output+0x4e9/0xb7d
[   86.051955]  mctp_local_output+0x4e9/0xb7d
[   86.051955]  ? mctp_dev_set_key+0x79/0x79
[   86.051955]  ? copyin+0x38/0x50
[   86.051955]  ? _copy_from_iter+0x1b6/0xf20
[   86.051955]  ? sysvec_apic_timer_interrupt+0x97/0xb0
[   86.051955]  ? asm_sysvec_apic_timer_interrupt+0x12/0x20
[   86.051955]  ? mctp_local_output+0x1/0xb7d
[   86.051955]  mctp_sendmsg+0x64d/0xdb0
[   86.051955]  ? mctp_sk_close+0x20/0x20
[   86.051955]  ? __fget_light+0x2fd/0x4f0
[   86.051955]  ? mctp_sk_close+0x20/0x20
[   86.051955]  sock_sendmsg+0xdd/0x110
[   86.051955]  __sys_sendto+0x1cc/0x2a0
[   86.051955]  ? __ia32_sys_getpeername+0xa0/0xa0
[   86.051955]  ? new_sync_write+0x335/0x550
[   86.051955]  ? alloc_file+0x22f/0x500
[   86.051955]  ? __ip_do_redirect+0x820/0x1820
[   86.051955]  ? vfs_write+0x44d/0x7b0
[   86.051955]  ? vfs_write+0x44d/0x7b0
[   86.051955]  ? fput_many+0x15/0x120
[   86.051955]  ? ksys_write+0x155/0x1b0
[   86.051955]  ? __ia32_sys_read+0xa0/0xa0
[   86.051955]  __x64_sys_sendto+0xd8/0x1b0
[   86.051955]  ? exit_to_user_mode_prepare+0x2f/0x120
[   86.051955]  ? syscall_exit_to_user_mode+0x12/0x20
[   86.051955]  do_syscall_64+0x3a/0x80
[   86.051955]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   86.051955] RIP: 0033:0x7f82118a56b3
[   86.051955] RSP: 002b:00007ffdb154b110 EFLAGS: 00000293 ORIG_RAX: 000000000000002c
[   86.051955] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f82118a56b3
[   86.051955] RDX: 0000000000000010 RSI: 00007f8211cd4000 RDI: 0000000000000007
[   86.051955] RBP: 00007ffdb154c1d0 R08: 00007ffdb154b164 R09: 000000000000000c
[   86.051955] R10: 0000000000000000 R11: 0000000000000293 R12: 000055d779800db0
[   86.051955] R13: 00007ffdb154c2b0 R14: 0000000000000000 R15: 0000000000000000
[   86.051955]  </TASK>
[   86.051955]
[   86.051955] Allocated by task 295:
[   86.051955]  kasan_save_stack+0x1c/0x40
[   86.051955]  __kasan_kmalloc+0x84/0xa0
[   86.051955]  mctp_rtm_newaddr+0x242/0x610
[   86.051955]  rtnetlink_rcv_msg+0x2fd/0x8b0
[   86.051955]  netlink_rcv_skb+0x11c/0x340
[   86.051955]  netlink_unicast+0x439/0x630
[   86.051955]  netlink_sendmsg+0x752/0xc00
[   86.051955]  sock_sendmsg+0xdd/0x110
[   86.051955]  __sys_sendto+0x1cc/0x2a0
[   86.051955]  __x64_sys_sendto+0xd8/0x1b0
[   86.051955]  do_syscall_64+0x3a/0x80
[   86.051955]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   86.051955]
[   86.051955] Freed by task 301:
[   86.051955]  kasan_save_stack+0x1c/0x40
[   86.051955]  kasan_set_track+0x21/0x30
[   86.051955]  kasan_set_free_info+0x20/0x30
[   86.051955]  __kasan_slab_free+0x104/0x170
[   86.051955]  kfree+0x8c/0x290
[   86.051955]  mctp_dev_notify+0x161/0x2c0
[   86.051955]  raw_notifier_call_chain+0x8b/0xc0
[   86.051955]  unregister_netdevice_many+0x299/0x1180
[   86.051955]  unregister_netdevice_queue+0x210/0x2f0
[   86.051955]  unregister_netdev+0x13/0x20
[   86.051955]  mctp_serial_close+0x6d/0xa0
[   86.051955]  tty_ldisc_kill+0x31/0xa0
[   86.051955]  tty_ldisc_hangup+0x24f/0x560
[   86.051955]  __tty_hangup.part.28+0x2ce/0x6b0
[   86.051955]  tty_release+0x327/0xc70
[   86.051955]  __fput+0x1df/0x8b0
[   86.051955]  task_work_run+0xca/0x150
[   86.051955]  exit_to_user_mode_prepare+0x114/0x120
[   86.051955]  syscall_exit_to_user_mode+0x12/0x20
[   86.051955]  do_syscall_64+0x46/0x80
[   86.051955]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   86.051955]
[   86.051955] The buggy address belongs to the object at ffff888005f298c0
[   86.051955]  which belongs to the cache kmalloc-8 of size 8
[   86.051955] The buggy address is located 0 bytes inside of
[   86.051955]  8-byte region [ffff888005f298c0, ffff888005f298c8)
[   86.051955]
[   86.051955] The buggy address belongs to the physical page:
[   86.051955] flags: 0x100000000000200(slab|node=0|zone=1)
[   86.051955] raw: 0100000000000200 dead000000000100 dead000000000122 ffff888005c42280
[   86.051955] raw: 0000000000000000 0000000080660066 00000001ffffffff 0000000000000000
[   86.051955] page dumped because: kasan: bad access detected
[   86.051955]
[   86.051955] Memory state around the buggy address:
[   86.051955]  ffff888005f29780: 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00
[   86.051955]  ffff888005f29800: fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc
[   86.051955] >ffff888005f29880: fc fc fc fb fc fc fc fc fa fc fc fc fc fa fc fc
[   86.051955]                                            ^
[   86.051955]  ffff888005f29900: fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc
[   86.051955]  ffff888005f29980: fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc
[   86.051955] ==================================================================

To this end, just like the commit e0448092 ("Bluetooth: defer
cleanup of resources in hci_unregister_dev()")  this patch defers the
destructive kfree(mdev->addrs) in mctp_unregister to the mctp_dev_put,
where the refcount of mdev is zero and the entire device is reclaimed.
This prevents the use-after-free because the sendmsg thread holds the
reference of mdev in the mctp_route object.

Fixes: 583be982 (mctp: Add device handling and netlink interface)
Signed-off-by: default avatarLin Ma <linma@zju.edu.cn>
Acked-by: default avatarJeremy Kerr <jk@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20220422114340.32346-1-linma@zju.edu.cnSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      b561275d
  3. 25 Apr, 2022 24 commits
    • Jakub Kicinski's avatar
      Merge branch 'net-smc-two-fixes-for-smc-fallback' · c3e8d5a4
      Jakub Kicinski authored 
      Wen Gu says:

====================
net/smc: Two fixes for smc fallback

This patch set includes two fixes for smc fallback:

Patch 1/2 introduces some simple helpers to wrap the replacement
and restore of clcsock's callback functions. Make sure that only
the original callbacks will be saved and not overwritten.

Patch 2/2 fixes a syzbot reporting slab-out-of-bound issue where
smc_fback_error_report() accesses the already freed smc sock (see
https://lore.kernel.org/r/00000000000013ca8105d7ae3ada@google.com/).
The patch fixes it by resetting sk_user_data and restoring clcsock
callback functions timely in fallback situation.

But it should be noted that although patch 2/2 can fix the issue
of 'slab-out-of-bounds/use-after-free in smc_fback_error_report',
it can't pass the syzbot reproducer test. Because after applying
these two patches in upstream, syzbot reproducer triggered another
known issue like this:

==================================================================
BUG: KASAN: use-after-free in tcp_retransmit_timer+0x2ef3/0x3360 net/ipv4/tcp_timer.c:511
Read of size 8 at addr ffff888020328380 by task udevd/4158

CPU: 1 PID: 4158 Comm: udevd Not tainted 5.18.0-rc3-syzkaller-00074-gb05a5683-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
  print_address_description.constprop.0.cold+0xeb/0x467 mm/kasan/report.c:313
  print_report mm/kasan/report.c:429 [inline]
  kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491
  tcp_retransmit_timer+0x2ef3/0x3360 net/ipv4/tcp_timer.c:511
  tcp_write_timer_handler+0x5e6/0xbc0 net/ipv4/tcp_timer.c:622
  tcp_write_timer+0xa2/0x2b0 net/ipv4/tcp_timer.c:642
  call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421
  expire_timers kernel/time/timer.c:1466 [inline]
  __run_timers.part.0+0x679/0xa80 kernel/time/timer.c:1737
  __run_timers kernel/time/timer.c:1715 [inline]
  run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1750
  __do_softirq+0x29b/0x9c2 kernel/softirq.c:558
  invoke_softirq kernel/softirq.c:432 [inline]
  __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637
  irq_exit_rcu+0x5/0x20 kernel/softirq.c:649
  sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1097
 </IRQ>
 ...
(detail report can be found in https://syzkaller.appspot.com/text?tag=CrashReport&x=15406b44f00000)

IMHO, the above issue is the same as this known one: https://syzkaller.appspot.com/bug?extid=694120e1002c117747ed,
and it doesn't seem to be related with SMC. The discussion about this known issue is ongoing and can be found in
https://lore.kernel.org/bpf/000000000000f75af905d3ba0716@google.com/T/.

And I added the temporary solution mentioned in the above discussion on
top of my two patches, the syzbot reproducer of 'slab-out-of-bounds/
use-after-free in smc_fback_error_report' no longer triggers any issue.
====================

Link: https://lore.kernel.org/r/1650614179-11529-1-git-send-email-guwen@linux.alibaba.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      c3e8d5a4
    • Wen Gu's avatar
      net/smc: Fix slab-out-of-bounds issue in fallback · 0558226c
      Wen Gu authored 
      syzbot reported a slab-out-of-bounds/use-after-free issue,
which was caused by accessing an already freed smc sock in
fallback-specific callback functions of clcsock.

This patch fixes the issue by restoring fallback-specific
callback functions to original ones and resetting clcsock
sk_user_data to NULL before freeing smc sock.

Meanwhile, this patch introduces sk_callback_lock to make
the access and assignment to sk_user_data mutually exclusive.

Reported-by: syzbot+b425899ed22c6943e00b@syzkaller.appspotmail.com
Fixes: 341adeec ("net/smc: Forward wakeup to smc socket waitqueue after fallback")
Link: https://lore.kernel.org/r/00000000000013ca8105d7ae3ada@google.com/Signed-off-by: default avatarWen Gu <guwen@linux.alibaba.com>
Acked-by: default avatarKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      0558226c
    • Wen Gu's avatar
      net/smc: Only save the original clcsock callback functions · 97b9af7a
      Wen Gu authored 
      Both listen and fallback process will save the current clcsock
callback functions and establish new ones. But if both of them
happen, the saved callback functions will be overwritten.

So this patch introduces some helpers to ensure that only save
the original callback functions of clcsock.

Fixes: 341adeec ("net/smc: Forward wakeup to smc socket waitqueue after fallback")
Signed-off-by: default avatarWen Gu <guwen@linux.alibaba.com>
Acked-by: default avatarKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      97b9af7a
    • Eric Dumazet's avatar
      tcp: make sure treq->af_specific is initialized · ba5a4fdd
      Eric Dumazet authored 
      syzbot complained about a recent change in TCP stack,
hitting a NULL pointer [1]

tcp request sockets have an af_specific pointer, which
was used before the blamed change only for SYNACK generation
in non SYNCOOKIE mode.

tcp requests sockets momentarily created when third packet
coming from client in SYNCOOKIE mode were not using
treq->af_specific.

Make sure this field is populated, in the same way normal
TCP requests sockets do in tcp_conn_request().

[1]
TCP: request_sock_TCPv6: Possible SYN flooding on port 20002. Sending cookies.  Check SNMP counters.
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 3695 Comm: syz-executor864 Not tainted 5.18.0-rc3-syzkaller-00224-g5fd1fe48 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:tcp_create_openreq_child+0xe16/0x16b0 net/ipv4/tcp_minisocks.c:534
Code: 48 c1 ea 03 80 3c 02 00 0f 85 e5 07 00 00 4c 8b b3 28 01 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7e 08 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c9 07 00 00 48 8b 3c 24 48 89 de 41 ff 56 08 48
RSP: 0018:ffffc90000de0588 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888076490330 RCX: 0000000000000100
RDX: 0000000000000001 RSI: ffffffff87d67ff0 RDI: 0000000000000008
RBP: ffff88806ee1c7f8 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff87d67f00 R11: 0000000000000000 R12: ffff88806ee1bfc0
R13: ffff88801b0e0368 R14: 0000000000000000 R15: 0000000000000000
FS:  00007f517fe58700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffcead76960 CR3: 000000006f97b000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <IRQ>
 tcp_v6_syn_recv_sock+0x199/0x23b0 net/ipv6/tcp_ipv6.c:1267
 tcp_get_cookie_sock+0xc9/0x850 net/ipv4/syncookies.c:207
 cookie_v6_check+0x15c3/0x2340 net/ipv6/syncookies.c:258
 tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1131 [inline]
 tcp_v6_do_rcv+0x1148/0x13b0 net/ipv6/tcp_ipv6.c:1486
 tcp_v6_rcv+0x3305/0x3840 net/ipv6/tcp_ipv6.c:1725
 ip6_protocol_deliver_rcu+0x2e9/0x1900 net/ipv6/ip6_input.c:422
 ip6_input_finish+0x14c/0x2c0 net/ipv6/ip6_input.c:464
 NF_HOOK include/linux/netfilter.h:307 [inline]
 NF_HOOK include/linux/netfilter.h:301 [inline]
 ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:473
 dst_input include/net/dst.h:461 [inline]
 ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 NF_HOOK include/linux/netfilter.h:301 [inline]
 ipv6_rcv+0x27f/0x3b0 net/ipv6/ip6_input.c:297
 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5405
 __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5519
 process_backlog+0x3a0/0x7c0 net/core/dev.c:5847
 __napi_poll+0xb3/0x6e0 net/core/dev.c:6413
 napi_poll net/core/dev.c:6480 [inline]
 net_rx_action+0x8ec/0xc60 net/core/dev.c:6567
 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558
 invoke_softirq kernel/softirq.c:432 [inline]
 __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637
 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649
 sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1097

Fixes: 5b0b9e4c ("tcp: md5: incorrect tcp_header_len for incoming connections")
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Cc: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ba5a4fdd
    • Eric Dumazet's avatar
      tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT · 4bfe744f
      Eric Dumazet authored 
      I had this bug sitting for too long in my pile, it is time to fix it.

Thanks to Doug Porter for reminding me of it!

We had various attempts in the past, including commit
0cbe6a8f ("tcp: remove SOCK_QUEUE_SHRUNK"),
but the issue is that TCP stack currently only generates
EPOLLOUT from input path, when tp->snd_una has advanced
and skb(s) cleaned from rtx queue.

If a flow has a big RTT, and/or receives SACKs, it is possible
that the notsent part (tp->write_seq - tp->snd_nxt) reaches 0
and no more data can be sent until tp->snd_una finally advances.

What is needed is to also check if POLLOUT needs to be generated
whenever tp->snd_nxt is advanced, from output path.

This bug triggers more often after an idle period, as
we do not receive ACK for at least one RTT. tcp_notsent_lowat
could be a fraction of what CWND and pacing rate would allow to
send during this RTT.

In a followup patch, I will remove the bogus call
to tcp_chrono_stop(sk, TCP_CHRONO_SNDBUF_LIMITED)
from tcp_check_space(). Fact that we have decided to generate
an EPOLLOUT does not mean the application has immediately
refilled the transmit queue. This optimistic call
might have been the reason the bug seemed not too serious.

Tested:

200 ms rtt, 1% packet loss, 32 MB tcp_rmem[2] and tcp_wmem[2]

$ echo 500000 >/proc/sys/net/ipv4/tcp_notsent_lowat
$ cat bench_rr.sh
SUM=0
for i in {1..10}
do
 V=`netperf -H remote_host -l30 -t TCP_RR -- -r 10000000,10000 -o LOCAL_BYTES_SENT | egrep -v "MIGRATED|Bytes"`
 echo $V
 SUM=$(($SUM + $V))
done
echo SUM=$SUM

Before patch:
$ bench_rr.sh
130000000
80000000
140000000
140000000
140000000
140000000
130000000
40000000
90000000
110000000
SUM=1140000000

After patch:
$ bench_rr.sh
430000000
590000000
530000000
450000000
450000000
350000000
450000000
490000000
480000000
460000000
SUM=4680000000  # This is 410 % of the value before patch.

Fixes: c9bee3b7 ("tcp: TCP_NOTSENT_LOWAT socket option")
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Reported-by: default avatarDoug Porter <dsp@fb.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: default avatarSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4bfe744f
    • Vladimir Oltean's avatar
      net: mscc: ocelot: don't add VID 0 to ocelot->vlans when leaving VLAN-aware bridge · 1fcb8fb3
      Vladimir Oltean authored 
      DSA, through dsa_port_bridge_leave(), first notifies the port of the
fact that it left a bridge, then, if that bridge was VLAN-aware, it
notifies the port of the change in VLAN awareness state, towards
VLAN-unaware mode.

So ocelot_port_vlan_filtering() can be called when ocelot_port->bridge
is NULL, and this makes ocelot_add_vlan_unaware_pvid() create a struct
ocelot_bridge_vlan with a vid of 0 and an "untagged" setting of true on
that port.

In a way this structure correctly reflects the reality, but by design,
VID 0 (OCELOT_STANDALONE_PVID) was not meant to be kept in the bridge
VLAN list of the driver, but managed separately.

Having OCELOT_STANDALONE_PVID in ocelot->vlans makes us trip up on
several sanity checks that did not expect to have this VID there.
For example, after we leave a VLAN-aware bridge and we re-join it, we
can no longer program egress-tagged VLANs to hardware:

 # ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up
 # ip link set swp0 master br0
 # ip link set swp0 nomaster
 # ip link set swp0 master br0
 # bridge vlan add dev swp0 vid 100
Error: mscc_ocelot_switch_lib: Port with more than one egress-untagged VLAN cannot have egress-tagged VLANs.

But this configuration is in fact supported by the hardware, since we
could use OCELOT_PORT_TAG_NATIVE. According to its comment:

/* all VLANs except the native VLAN and VID 0 are egress-tagged */

yet when assessing the eligibility for this mode, we do not check for
VID 0 in ocelot_port_uses_native_vlan(), instead we just ensure that
ocelot_port_num_untagged_vlans() == 1. This is simply because VID 0
doesn't have a bridge VLAN structure.

The way I identify the problem is that ocelot_port_vlan_filtering(false)
only means to call ocelot_add_vlan_unaware_pvid() when we dynamically
turn off VLAN awareness for a bridge we are under, and the PVID changes
from the bridge PVID to a reserved PVID based on the bridge number.

Since OCELOT_STANDALONE_PVID is statically added to the VLAN table
during ocelot_vlan_init() and never removed afterwards, calling
ocelot_add_vlan_unaware_pvid() for it is not intended and does not serve
any purpose.

Fix the issue by avoiding the call to ocelot_add_vlan_unaware_pvid(vid=0)
when we're resetting VLAN awareness after leaving the bridge, to become
a standalone port.

Fixes: 54c31984 ("net: mscc: ocelot: enforce FDB isolation when VLAN-unaware")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1fcb8fb3
    • Vladimir Oltean's avatar
      net: mscc: ocelot: ignore VID 0 added by 8021q module · 9323ac36
      Vladimir Oltean authored 
      Both the felix DSA driver and ocelot switchdev driver declare
dev->features & NETIF_F_HW_VLAN_CTAG_FILTER under certain circumstances*,
so the 8021q module will add VID 0 to our RX filter when the port goes
up, to ensure 802.1p traffic is not dropped.

We treat VID 0 as a special value (OCELOT_STANDALONE_PVID) which
deliberately does not have a struct ocelot_bridge_vlan associated with
it. Instead, this gets programmed to the VLAN table in ocelot_vlan_init().

If we allow external calls to modify VID 0, we reach the following
situation:

 # ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up
 # ip link set swp0 master br0
 # ip link set swp0 up # this adds VID 0 to ocelot->vlans with untagged=false
bridge vlan
port              vlan-id
swp0              1 PVID Egress Untagged # the bridge also adds VID 1
br0               1 PVID Egress Untagged
 # bridge vlan add dev swp0 vid 100 untagged
Error: mscc_ocelot_switch_lib: Port with egress-tagged VLANs cannot have more than one egress-untagged (native) VLAN.

This configuration should have been accepted, because
ocelot_port_manage_port_tag() should select OCELOT_PORT_TAG_NATIVE.
Yet it isn't, because we have an entry in ocelot->vlans which says
VID 0 should be egress-tagged, something the hardware can't do.

Fix this by suppressing additions/deletions on VID 0 and managing this
VLAN exclusively using OCELOT_STANDALONE_PVID.

*DSA toggles it when the port becomes VLAN-aware by joining a VLAN-aware
bridge. Ocelot declares it unconditionally for some reason.

Fixes: 54c31984 ("net: mscc: ocelot: enforce FDB isolation when VLAN-unaware")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9323ac36
    • Vladimir Oltean's avatar
      net: dsa: flood multicast to CPU when slave has IFF_PROMISC · 7c762e70
      Vladimir Oltean authored 
      Certain DSA switches can eliminate flooding to the CPU when none of the
ports have the IFF_ALLMULTI or IFF_PROMISC flags set. This is done by
synthesizing a call to dsa_port_bridge_flags() for the CPU port, a call
which normally comes from the bridge driver via switchdev.

The bridge port flags and IFF_PROMISC|IFF_ALLMULTI have slightly
different semantics, and due to inattention/lack of proper testing, the
IFF_PROMISC flag allows unknown unicast to be flooded to the CPU, but
not unknown multicast.

This must be fixed by setting both BR_FLOOD (unicast) and BR_MCAST_FLOOD
in the synthesized dsa_port_bridge_flags() call, since IFF_PROMISC means
that packets should not be filtered regardless of their MAC DA.

Fixes: 7569459a ("net: dsa: manage flooding on the CPU ports")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7c762e70
    • Peilin Ye's avatar
      ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md mode · 31c417c9
      Peilin Ye authored 
      As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in
collect_md mode is racy for [IP6]GRE[TAP] devices.  Consider the
following sequence of events:

1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link
   add ... external".  "ip" ignores "[o]seq" if "external" is specified,
   so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e.
   it uses lockless TX);
2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g.
   bpf_skb_set_tunnel_key() in an eBPF program attached to this device;
3. gre_fb_xmit() or __gre6_xmit() processes these skb's:

	gre_build_header(skb, tun_hlen,
			 flags, protocol,
			 tunnel_id_to_key32(tun_info->key.tun_id),
			 (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++)
					      : 0);   ^^^^^^^^^^^^^^^^^

Since we are not using the TX lock (&txq->_xmit_lock), multiple CPUs may
try to do this tunnel->o_seqno++ in parallel, which is racy.  Fix it by
making o_seqno atomic_t.

As mentioned by Eric Dumazet in commit b790e01a ("ip_gre: lockless
xmit"), making o_seqno atomic_t increases "chance for packets being out
of order at receiver" when NETIF_F_LLTX is on.

Maybe a better fix would be:

1. Do not ignore "oseq" in external mode.  Users MUST specify "oseq" if
   they want the kernel to allow sequencing of outgoing packets;
2. Reject all outgoing TUNNEL_SEQ packets if the device was not created
   with "oseq".

Unfortunately, that would break userspace.

We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us
do it in separate patches to keep this fix minimal.
Suggested-by: default avatarJakub Kicinski <kuba@kernel.org>
Fixes: 77a5196a ("gre: add sequence number for collect md mode.")
Signed-off-by: default avatarPeilin Ye <peilin.ye@bytedance.com>
Acked-by: default avatarWilliam Tu <u9012063@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      31c417c9
    • Peilin Ye's avatar
      ip6_gre: Make o_seqno start from 0 in native mode · fde98ae9
      Peilin Ye authored 
      For IP6GRE and IP6GRETAP devices, currently o_seqno starts from 1 in
native mode.  According to RFC 2890 2.2., "The first datagram is sent
with a sequence number of 0."  Fix it.

It is worth mentioning that o_seqno already starts from 0 in collect_md
mode, see the "if (tunnel->parms.collect_md)" clause in __gre6_xmit(),
where tunnel->o_seqno is passed to gre_build_header() before getting
incremented.

Fixes: c12b395a ("gre: Support GRE over IPv6")
Signed-off-by: default avatarPeilin Ye <peilin.ye@bytedance.com>
Acked-by: default avatarWilliam Tu <u9012063@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fde98ae9
    • Peilin Ye's avatar
      ip_gre: Make o_seqno start from 0 in native mode · ff827beb
      Peilin Ye authored 
      For GRE and GRETAP devices, currently o_seqno starts from 1 in native
mode.  According to RFC 2890 2.2., "The first datagram is sent with a
sequence number of 0."  Fix it.

It is worth mentioning that o_seqno already starts from 0 in collect_md
mode, see gre_fb_xmit(), where tunnel->o_seqno is passed to
gre_build_header() before getting incremented.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: default avatarPeilin Ye <peilin.ye@bytedance.com>
Acked-by: default avatarWilliam Tu <u9012063@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ff827beb
    • Dan Carpenter's avatar
      net: lan966x: fix a couple off by one bugs · 9810c58c
      Dan Carpenter authored 
      The lan966x->ports[] array has lan966x->num_phys_ports elements.  These
are assigned in lan966x_probe().  That means the > comparison should be
changed to >=.

The first off by one check is harmless but the second one could lead to
an out of bounds access and a crash.

Fixes: 5ccd66e0 ("net: lan966x: add support for interrupts from analyzer")
Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9810c58c
    • liuyacan's avatar
      net/smc: sync err code when tcp connection was refused · 4e2e65e2
      liuyacan authored 
      In the current implementation, when TCP initiates a connection
to an unavailable [ip,port], ECONNREFUSED will be stored in the
TCP socket, but SMC will not. However, some apps (like curl) use
getsockopt(,,SO_ERROR,,) to get the error information, which makes
them miss the error message and behave strangely.

Fixes: 50717a37 ("net/smc: nonblocking connect rework")
Signed-off-by: default avatarliuyacan <liuyacan@corp.netease.com>
Reviewed-by: default avatarTony Lu <tonylu@linux.alibaba.com>
Acked-by: default avatarKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4e2e65e2
    • Peng Wu's avatar
      net: hns: Add missing fwnode_handle_put in hns_mac_init · e85f8a9f
      Peng Wu authored 
      In one of the error paths of the device_for_each_child_node() loop
in hns_mac_init, add missing call to fwnode_handle_put.
Signed-off-by: default avatarPeng Wu <wupeng58@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e85f8a9f
    • David S. Miller's avatar
      Merge branch 'hns3-fixes' · c4c89a6a
      David S. Miller authored 
      Guangbin Huang says:

====================
net: hns3: add some fixes for -net

This series adds some fixes for the HNS3 ethernet driver.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c4c89a6a
    • Jian Shen's avatar
      net: hns3: add return value for mailbox handling in PF · c59d6062
      Jian Shen authored 
      Currently, there are some querying mailboxes sent from VF to PF,
and VF will wait the PF's handling result. For mailbox
HCLGE_MBX_GET_QID_IN_PF and HCLGE_MBX_GET_RSS_KEY, it may fail
when the input parameter is invalid, but the prototype of their
handler function is void. In this case, PF always return success
to VF, which may cause the VF get incorrect result.

Fixes it by adding return value for these function.

Fixes: 63b1279d ("net: hns3: check queue id range before using")
Fixes: 532cfc0d ("net: hns3: add a check for index in hclge_get_rss_key()")
Signed-off-by: default avatarJian Shen <shenjian15@huawei.com>
Signed-off-by: default avatarGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c59d6062
    • Jian Shen's avatar
      net: hns3: add validity check for message data length · 7d413735
      Jian Shen authored 
      Add validity check for message data length in function
hclge_send_mbx_msg(), avoid unexpected overflow.

Fixes: dde1a86e ("net: hns3: Add mailbox support to PF driver")
Signed-off-by: default avatarJian Shen <shenjian15@huawei.com>
Signed-off-by: default avatarGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7d413735
    • Jie Wang's avatar
      net: hns3: modify the return code of hclge_get_ring_chain_from_mbx · 48009e99
      Jie Wang authored 
      Currently, function hclge_get_ring_chain_from_mbx will return -ENOMEM if
ring_num is bigger than HCLGE_MBX_MAX_RING_CHAIN_PARAM_NUM. It is better to
return -EINVAL for the invalid parameter case.

So this patch fixes it by return -EINVAL in this abnormal branch.

Fixes: 5d02a58d ("net: hns3: fix for buffer overflow smatch warning")
Signed-off-by: default avatarJie Wang <wangjie125@huawei.com>
Signed-off-by: default avatarGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      48009e99
    • Peng Li's avatar
      net: hns3: fix error log of tx/rx tqps stats · 123521b6
      Peng Li authored 
      The comments in function hclge_comm_tqps_update_stats is not right,
so fix it.

Fixes: 287db5c4 ("net: hns3: create new set of common tqp stats APIs for PF and VF reuse")
Signed-off-by: default avatarPeng Li <lipeng321@huawei.com>
Signed-off-by: default avatarGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      123521b6
    • Hao Chen's avatar
      net: hns3: align the debugfs output to the left · 1ec1968e
      Hao Chen authored 
      For debugfs node rx/tx_queue_info and rx/tx_bd_info, their output info is
aligned to the right, it's not aligned with output of other debugfs node,
so uniform their output info.

Fixes: 907676b1 ("net: hns3: use tx bounce buffer for small packets")
Fixes: e44c495d ("net: hns3: refactor queue info of debugfs")
Fixes: 77e91848 ("net: hns3: refactor dump bd info of debugfs")
Signed-off-by: default avatarHao Chen <chenhao288@hisilicon.com>
Signed-off-by: default avatarGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1ec1968e
    • Jian Shen's avatar
      net: hns3: clear inited state and stop client after failed to register netdev · e98365af
      Jian Shen authored 
      If failed to register netdev, it needs to clear INITED state and stop
client in case of cause problem when concurrency with uninitialized
process of driver.

Fixes: a289a7e5 ("net: hns3: put off calling register_netdev() until client initialize complete")
Signed-off-by: default avatarJian Shen <shenjian15@huawei.com>
Signed-off-by: default avatarGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e98365af
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf · 5220a525
      David S. Miller authored 
      Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Fix incorrect printing of memory size of IPVS connection hash table,
   from Pengcheng Yang.

2) Fix spurious EEXIST errors in nft_set_rbtree.

3) Remove leftover empty flowtable file, from  Rongguang Wei.

4) Fix ip6_route_me_harder() with vrf driver, from Martin Willi.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5220a525
    • Martin Willi's avatar
      netfilter: Update ip6_route_me_harder to consider L3 domain · 8ddffdb9
      Martin Willi authored 
      The commit referenced below fixed packet re-routing if Netfilter mangles
a routing key property of a packet and the packet is routed in a VRF L3
domain. The fix, however, addressed IPv4 re-routing, only.

This commit applies the same behavior for IPv6. While at it, untangle
the nested ternary operator to make the code more readable.

Fixes: 6d8b49c3 ("netfilter: Update ip_route_me_harder to consider L3 domain")
Cc: stable@vger.kernel.org
Signed-off-by: default avatarMartin Willi <martin@strongswan.org>
Reviewed-by: default avatarDavid Ahern <dsahern@kernel.org>
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      8ddffdb9
    • Rongguang Wei's avatar
      netfilter: flowtable: Remove the empty file · b9b1e0da
      Rongguang Wei authored 
      CONFIG_NF_FLOW_TABLE_IPV4 is already removed and the real user is also
removed(nf_flow_table_ipv4.c is empty).

Fixes: c42ba429 ("netfilter: flowtable: remove ipv4/ipv6 modules")
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      b9b1e0da
  5. 23 Apr, 2022 1 commit
    • Xin Long's avatar
      sctp: check asoc strreset_chunk in sctp_generate_reconf_event · 165e3e17
      Xin Long authored 
      A null pointer reference issue can be triggered when the response of a
stream reconf request arrives after the timer is triggered, such as:

  send Incoming SSN Reset Request --->
  CPU0:
   reconf timer is triggered,
   go to the handler code before hold sk lock
                            <--- reply with Outgoing SSN Reset Request
  CPU1:
   process Outgoing SSN Reset Request,
   and set asoc->strreset_chunk to NULL
  CPU0:
   continue the handler code, hold sk lock,
   and try to hold asoc->strreset_chunk, crash!

In Ying Xu's testing, the call trace is:

  [ ] BUG: kernel NULL pointer dereference, address: 0000000000000010
  [ ] RIP: 0010:sctp_chunk_hold+0xe/0x40 [sctp]
  [ ] Call Trace:
  [ ]  <IRQ>
  [ ]  sctp_sf_send_reconf+0x2c/0x100 [sctp]
  [ ]  sctp_do_sm+0xa4/0x220 [sctp]
  [ ]  sctp_generate_reconf_event+0xbd/0xe0 [sctp]
  [ ]  call_timer_fn+0x26/0x130

This patch is to fix it by returning from the timer handler if asoc
strreset_chunk is already set to NULL.

Fixes: 7b9438de ("sctp: add stream reconf timer")
Reported-by: default avatarYing Xu <yinxu@redhat.com>
Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
Acked-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      165e3e17
  7. 22 Apr, 2022 11 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7