- 26 Oct, 2016 10 commits
-
-
Imre Deak authored
All types of DP devices (eDP, DP sink, DP branch) will fail their probe if the start of DPCD can't be read. The LSPCON PCON functionality also depends on accessing this area, so fail the probe if the read fails. Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-6-git-send-email-imre.deak@intel.com
-
Imre Deak authored
Extend the branch/sink descriptor info with the missing device ID field. While at it also read out all the descriptor registers in one transfer and make the debug print more compact. v2: (Jani) - Cache the descriptor in intel_dp. - Split out this change into a separate patch. v3: (Jani) - Fix return value check of __intel_dp_read_desc(). - Use %pE instead of %s to print the device ID. Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Imre Deak authored
There are two separate sets of DPCD registers for the DP OUI - as well as for the device ID and HW/SW revision - based on whether the given DP device is a branch or a sink. Currently we print both branch and sink OUIs, for consistency print only the one that corresponds to the probed device. v2: - Split out this change into a separate patch. (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Imre Deak authored
Performing DPCD AUX reads based on debug settings may introduce obscure bugs in other places that depend on the read being done (or being not done). To reduce the uncertainty perform the reads unconditionally. Cc: Mika Kahola <mika.kahola@intel.com> Suggested-by:
-
Imre Deak authored
This check is open-coded in a few places, so it makes sense to simplify things by having a helper for it similar to the rest of DPCD feature helpers. v2: (Jani) - Move the helper to drm_dp_helper.h. - Split out this change to a separate patch. Cc: Jani Nikula <jani.nikula@intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Libin Yang authored
When modeset occurs and the LS_CLK is set to some special values in DP mode, the N/M need to be set manually if audio is playing. Otherwise the first several seconds may be silent in audio playback. The relationship of Maud and Naud is expressed in the following equation: Maud/Naud = 512 * fs / f_LS_Clk Please refer VESA DisplayPort Standard spec for details. v2 by Jani: - organize Maud/Naud table according to DP 1.4 spec - add 64k and 128k audio rates - update HSW_AUD_M_CTS_ENABLE register when Maud not found - remove extra checks for port clock - simplify Maud/Naud lookup - reset patch author back to Libin Cc: "Zhang, Keqiao" <keqiao.zhang@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: "Lin, Mengdong" <mengdong.lin@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Libin Yang <libin.yang@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
The array contains the crtc clock, rely on that. While at it, debug log the HDMI N value or automatic mode. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: "Lin, Mengdong" <mengdong.lin@intel.com> Cc: Libin Yang <libin.yang@linux.intel.com> Reviewed-by:
-
Ville Syrjälä authored
Once we've determined that the sink is MST capable we never end up running through the full detect cycle again, despite getting HPDs. Fix tht by ripping out the incorrect piece of code responsible. This got broken when I moved the long HPD handling to the ->detect() hook, but failed to remove the leftover code. Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: drm-intel-fixes@lists.freedesktop.org Cc: Rui Tiago Matos <tiagomatos@gmail.com> Tested-by:
Rui Tiago Matos <tiagomatos@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98323 Cc: Kirill A. Shutemov <kirill@shutemov.name> Tested-by:
Kirill A. Shutemov <kirill@shutemov.name> References: https://bugs.freedesktop.org/show_bug.cgi?id=98306 Fixes: 27d4efc5 ("drm/i915: Move long hpd handling into the hotplug work") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Tvrtko Ursulin authored
Objects can have multiple VMAs used for display in which case assertion that objects must not be pinned for display more times than the current VMA is incorrect. v2: Commit message update. (Chris Wilson) Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 058d88c4 ("drm/i915: Track pinned VMA") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Tvrtko Ursulin authored
We do not need to set up a fence for the rotated view. Display does not need it and no one can access it. v2: Move code to __i915_vma_set_map_and_fenceable. (Chris Wilson) Signed-off-by:
-
- 25 Oct, 2016 22 commits
-
-
Akash Goel authored
Driver accesses the ringbuffer pages, via GMADR BAR, if the pages are pinned in mappable aperture portion of GGTT and for ringbuffer pages allocated from Stolen memory, access can only be done through GMADR BAR. In case of GuC based submission, updates done in ringbuffer via GMADR may not get committed to memory by the time the Command streamer starts reading them, resulting in fetching of stale data. For Host based submission, such problem is not there as the write to Ring Tail or ELSP register happens from the Host side prior to submission. Access to any GFX register from CPU side goes to GTTMMADR BAR and Hw already enforces the ordering between outstanding GMADR writes & new GTTMADR access. MMIO writes from GuC side do not go to GTTMMADR BAR as GuC communication to registers within GT is contained within GT, so ordering is not enforced resulting in a race, which can manifest in form of a hang. To ensure the flush of in-flight GMADR writes, a POSTING READ is done to GuC register prior to doorbell ring. There is already a similar WA in i915_gem_object_flush_gtt_write_domain(), which takes care of GMADR writes from User space to GEM buffers, but not the ringbuffer writes from KMD. This WA is needed on all recent HW. v2: - Use POSTING_READ_FW instead of POSTING_READ as GuC register do not lie in any forcewake domain range and so the overhead of spinlock & search in the forcewake table is avoidable. (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by:
Akash Goel <akash.goel@intel.com> Reviewed-by:
-
Chris Wilson authored
As well as knowing when the error occurred, it is more interesting to me to know how long after booting the error occurred, and for good measure record the time since last hw initialisation. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161025121602.1457-1-chris@chris-wilson.co.uk
-
Akash Goel authored
The GuC log buffer flush work item has to do a register access to send the ack to GuC and this work item, if not synced before suspend, can potentially get executed after the GFX device is suspended. This work item function uses rpm get/put calls around the Hw access, which covers the rpm suspend case but for system suspend a sync would be required as kernel can potentially schedule the work items even after some devices, including GFX, have been put to suspend. But sync has to be done only for the system suspend case, as sync along with rpm get/put can cause a deadlock for rpm suspend path. To have the sync, but like a NOOP, for rpm suspend path also this work item could have been queued from the irq handler only when the device is runtime active & kept active while that work item is pending or getting executed but an interrupt can come even after the device is out of use and so can potentially lead to missing of this work item. By marking the workqueue, dedicated for handling GuC log buffer flush interrupts, as freezable we don't have to bother about flushing of this work item from the suspend hooks, the pending work item if any will be either executed before the suspend or scheduled later on resume. This way the handling of log buffer flush work item can be kept same between system suspend & rpm suspend. Suggested-by:
-
Akash Goel authored
As per the current i915 Driver load sequence, debugfs registration is done at the end and so the relay channel debugfs file is also created after that but the GuC firmware is loaded much earlier in the sequence. As a result Driver could miss capturing the boot-time logs of GuC firmware if there are flush interrupts from the GuC side. Relay has a provision to support early logging where initially only relay channel can be created, to have buffers for storing logs, and later on channel can be associated with a debugfs file at appropriate time. Have availed that, which allows Driver to capture boot time logs also, which can be collected once Userspace comes up. v2: - Remove the couple of FIXMEs, as now the relay channel will be created early before enabling the flush interrupts, so no possibility of relay channel pointer being modified & read at the same time from 2 different execution contexts. - Rebase. v3: - Add a comment to justiy setting 'is_global' before the NULL check on the parent directory dentry pointer. Suggested-by:
-
Akash Goel authored
To ensure that we always get the up-to-date data from log buffer, its better to access the buffer through an uncached CPU mapping. Also the way buffer is accessed from GuC & Host side, manually doing cache flush may not be effective always if cached CPU mapping is used. In order to avoid any performance drop & have fast reads from the GuC log buffer, used SSE4.1 movntdqa based memcpy function i915_memcpy_from_wc, as copying using movntqda from WC type memory is almost as fast as reading from WB memory. This way log buffer sampling time will not get increased and so would be able to deal with the flush interrupt storm when GuC is generating logs at a very high rate. Ideally SSE 4.1 should be present on all chipsets supporting GuC based submisssions, but if not then logging will not be enabled. v2: Rebase. v3: Squash the WC type vmalloc mapping patch with this patch. (Chris) Suggested-by:
-
Sagar Arun Kamble authored
This patch provides debugfs interface i915_guc_output_control for on the fly enabling/disabling of logging in GuC firmware and controlling the verbosity level of logs. The value written to the file, should have bit 0 set to enable logging and bits 4-7 should contain the verbosity info. v2: Add a forceful flush, to collect left over logs, on disabling logging. Useful for Validation. v3: Besides minor cleanup, implement read method for the debugfs file and set the guc_log_level to -1 when logging is disabled. (Tvrtko) v4: Minor cleanup & rebase. (Tvrtko) v5: - Lock struct_mutex after the NULL check for guc log buffer vma. (Chris) - Rebase. Signed-off-by: -
Sagar Arun Kamble authored
GuC firmware sends a flush interrupt to Host when the log buffer is half full and at that time only it updates the log buffer state. But in certain cases, as described below, it could be useful to have all that even when log buffer is only partially full. For that there is a force log buffer flush Host2GuC action supported by GuC firmware. For Validation requirements, a forceful flush is needed to collect the left over logs on disabling logging. The same can be done before proceeding with GPU/GuC reset as there could be some data in log buffer which is yet to be captured and those logs would be particularly useful to understand that why the reset was initiated. Signed-off-by:
-
Akash Goel authored
Added the dump of GuC log buffer to i915 error state, as the contents of GuC log buffer would also be useful to determine that why the GPU reset was triggered. v2: - For uniformity use existing helper function print_error_obj() to dump out contents of GuC log buffer, pretty printing is better left to userspace. (Chris) - Skip the dumping of GuC log buffer when logging is disabled as it won't be of any use. - Rebase. v3: Rebase. Suggested-by:
-
Akash Goel authored
In cases where GuC generate logs at a very high rate, correspondingly the rate of flush interrupts is also very high. So far total 8 pages were allocated for storing both ISR & DPC logs. As per the half-full draining protocol followed by GuC, by doubling the number of pages, the frequency of flush interrupts can be cut down to almost half, which then helps in reducing the logging overhead. So now allocating 8 pages apiece for ISR & DPC logs. This also helps in reducing the output log file size, apart from reducing the flush interrupt count. With the original settings, 44 KB was needed for one snapshot. With modified settings, 76 KB is needed for a snapshot which will be equivalent to 2 snapshots of the original setting. So 12KB saving, every 88 KB, over the original setting. Suggested-by:
-
Akash Goel authored
GuC firmware sends an interrupt to flush the log buffer when it becomes half full, so Driver doesn't really need to sample the complete buffer and can just copy only the newly written data by GuC into the local buffer, i.e. as per the read & write pointer values. Moreover the flush interrupt would generally come for one type of log buffer, when it becomes half full, so at that time the other 2 types of log buffer would comparatively have much lesser unread data in them. In case of overflow reported by GuC, Driver do need to copy the entire buffer as the whole buffer would contain the unread data. v2: Rebase. v3: Fix the blooper of doing the copy twice. (Tvrtko) v4: Add curlies for 'else' case also, matching the 'if'. (Tvrtko) Signed-off-by:
-
Akash Goel authored
GuC firmware sends an interrupt to flush the log buffer when it becomes half full. GuC firmware also tracks how many times the buffer overflowed. It would be useful to maintain a statistics of how many flush interrupts were received and for which type of log buffer, along with the overflow count of each buffer type. Augmented i915_log_info debugfs to report back these statistics. v2: - Update the logic to detect multiple overflows between the 2 flush interrupts and also log a message for overflow (Tvrtko) - Track the number of times there was no free sub buffer to capture the GuC log buffer. (Tvrtko) v3: - Fix the printf field width for overflow counter, set it to 10 as per the max value of u32, which takes 10 digits in decimal form. (Tvrtko) v4: - Move the log buffer overflow handling to a new function for better readability. (Tvrtko) Signed-off-by:
-
Akash Goel authored
With the addition of new Host2GuC actions related to GuC logging, there is a need of a lock to serialize them, as they can execute concurrently with each other and also with other existing actions. v2: Use mutex in place of spinlock to serialize, as sleep can happen while waiting for the action's response from GuC. (Tvrtko) v3: To conform to the general rules, acquire mutex before taking the forcewake. (Tvrtko) Signed-off-by: -
Akash Goel authored
Added a new debugfs interface '/sys/kernel/debug/dri/guc_log' for the User to capture GuC firmware logs. Availed relay framework to implement the interface, where Driver will have to just use a relay API to store snapshots of the GuC log buffer in the buffer managed by relay. The snapshot will be taken when GuC firmware sends a log buffer flush interrupt and up to four snapshots could be stored in the relay buffer. The relay buffer will be operated in a mode where it will overwrite the data not yet collected by User. Besides mmap method, through which User can directly access the relay buffer contents, relay also supports the 'poll' method. Through the 'poll' call on log file, User can come to know whenever a new snapshot of the log buffer is taken by Driver, so can run in tandem with the Driver and capture the logs in a sustained/streaming manner, without any loss of data. v2: Defer the creation of relay channel & associated debugfs file, as debugfs setup is now done at the end of i915 Driver load. (Chris) v3: - Switch to no-overwrite mode for relay. - Fix the relay sub buffer switching sequence. v4: - Update i915 Kconfig to select RELAY config. (TvrtKo) - Log a message when there is no sub buffer available to capture the GuC log buffer. (Tvrtko) - Increase the number of relay sub buffers to 8 from 4, to have sufficient buffering for boot time logs v5: - Fix the alignment, indentation issues and some minor cleanup. (Tvrtko) - Update the comment to elaborate on why a relay channel has to be associated with the debugfs file. (Tvrtko) v6: - Move the write to 'is_global' after the NULL check on parent directory dentry pointer. (Tvrtko) v7: Add a BUG_ON to validate relay buffer allocation size. (Chris) Testcase: igt/tools/intel_guc_logger Suggested-by:Sourab Gupta <sourab.gupta@intel.com> Signed-off-by:
-
Sagar Arun Kamble authored
GuC ukernel sends an interrupt to Host to flush the log buffer and expects Host to correspondingly update the read pointer information in the state structure, once it has consumed the log buffer contents by copying them to a file or buffer. Even if Host couldn't copy the contents, it can still update the read pointer so that logging state is not disturbed on GuC side. v2: - Use a dedicated workqueue for handling flush interrupt. (Tvrtko) - Reduce the overall log buffer copying time by skipping the copy of crash buffer area for regular cases and copying only the state structure data in first page. v3: - Create a vmalloc mapping of log buffer. (Chris) - Cover the flush acknowledgment under rpm get & put.(Chris) - Revert the change of skipping the copy of crash dump area, as not really needed, will be covered by subsequent patch. v4: - Destroy the wq under the same condition in which it was created, pass dev_piv pointer instead of dev to newly added GuC function, add more comments & rename variable for clarity. (Tvrtko) v5: - Allocate & destroy the dedicated wq, for handling flush interrupt, from the setup/teardown routines of GuC logging. (Chris) - Validate the log buffer size value retrieved from state structure and do some minor cleanup. (Tvrtko) - Fix error/warnings reported by checkpatch. (Tvrtko) - Rebase. v6: - Remove the interrupts_enabled check from guc_capture_logs_work, need to process that last work item also, queued just before disabling the interrupt as log buffer flush interrupt handling is a bit different case where GuC is actually expecting an ACK from host, which should be provided to keep the logging going. Sync against the work will be done by caller disabling the interrupt. - Don't sample the log buffer size value from state structure, directly use the expected value to move the pointer & do the copy and that cannot go wrong (out of bounds) as Driver only allocated the log buffer and the relay buffers. Driver should refrain from interpreting the log packet, as much possible and let Userspace parser detect the anomaly. (Chris) v7: - Use switch statement instead of 'if else' for retrieving the GuC log buffer size. (Tvrtko) - Refactored the log buffer copying function and shortended the name of couple of variables for better readability. (Tvrtko) v8: - Make the dedicated wq as a high priority one to further reduce the turnaround time of handing log buffer flush event from GuC. Signed-off-by:
-
Sagar Arun Kamble authored
There are certain types of interrupts which Host can receive from GuC. GuC ukernel sends an interrupt to Host for certain events, like for example retrieve/consume the logs generated by ukernel. This patch adds support to receive interrupts from GuC but currently enables & partially handles only the interrupt sent by GuC ukernel. Future patches will add support for handling other interrupt types. v2: - Use common low level routines for PM IER/IIR programming (Chris) - Rename interrupt functions to gen9_xxx from gen8_xxx (Chris) - Replace disabling of wake ref asserts with rpm get/put (Chris) v3: - Update comments for more clarity. (Tvrtko) - Remove the masking of GuC interrupt, which was kept masked till the start of bottom half, its not really needed as there is only a single instance of work item & wq is ordered. (Tvrtko) v4: - Rebase. - Rename guc_events to pm_guc_events so as to be indicative of the register/control block it is associated with. (Chris) - Add handling for back to back log buffer flush interrupts. v5: - Move the read & clearing of register, containing Guc2Host message bits, outside the irq spinlock. (Tvrtko) v6: - Move the log buffer flush interrupt related stuff to the following patch so as to do only generic bits in this patch. (Tvrtko) - Rebase. v7: - Remove the interrupts_enabled check from gen9_guc_irq_handler, want to process that last interrupt also before disabling the interrupt, sync against the work queued by irq handler will be done by caller disabling the interrupt. Signed-off-by:
-
Akash Goel authored
So far PM IER/IIR/IMR registers were being used only for Turbo related interrupts. But interrupts coming from GuC also use the same set. As a precursor to supporting GuC interrupts, added new low level routines so as to allow sharing the programming of PM IER/IIR/IMR registers between Turbo & GuC. Also similar to PM IMR, maintaining a bitmask for PM IER register, to allow easy sharing of it between Turbo & GuC without involving a rmw operation. v2: - For appropriateness & avoid any ambiguity, rename old functions enable/disable pm_irq to mask/unmask pm_irq and rename new functions enable/disable pm_interrupts to enable/disable pm_irq. (Tvrtko) - Use u32 in place of uint32_t. (Tvrtko) v3: - Rename the fields pm_irq_mask & pm_ier_mask and do some cleanup. (Chris) - Rebase. v4: Fix the inadvertent disabling of User interrupt for VECS ring causing failure for certain IGTs. v5: Use dev_priv with HAS_VEBOX macro. (Tvrtko) Suggested-by: -
Akash Goel authored
So far there were 2 fields related to GuC logs in 'intel_guc' structure. For the support of capturing GuC logs & storing them in a local buffer, multiple new fields would have to be added. This warrants a separate structure to contain the fields related to GuC logging state. Added a new structure 'intel_guc_log' and instance of it inside 'intel_guc' structure. v2: Rebase. Signed-off-by:
-
Sagar Arun Kamble authored
The first page of the GuC log buffer contains state info or meta data which is required to parse the logs contained in the subsequent pages. The structure representing the state info is added to interface file as Driver would need to handle log buffer flush interrupts from GuC. Added an enum for the different message/event types that can be send by the GuC ukernel to Host. Also added 2 new Host to GuC action types to inform GuC when Host has flushed the log buffer and forcefuly cause the GuC to send a new log buffer flush interrupt. v2: - Make documentation of log buffer state structure more elaborate & rename LOGBUFFERFLUSH action to LOG_BUFFER_FLUSH for consistency.(Tvrtko) v3: Add GuC log buffer layout diagram for more clarity. Signed-off-by:
-
Sagar Arun Kamble authored
GuC Log buffer allocation was tied up with verbosity level module param i915.guc_log_level. User would be given a provision to enable firmware logging at runtime, through a host2guc action, and not necessarily during Driver load time. But the address of log buffer can be passed only in init params, at firmware load time, so GuC has to be reset and firmware needs to be reloaded to pass the log buffer address at runtime. To avoid reset of GuC & reload of firmware, allocation of log buffer will be done always but logging would be enabled initially on GuC side based on the value of module parameter guc_log_level. v2: Update commit message to describe the constraint with allocation of log buffer at runtime. (Tvrtko) v3: Rebase. Signed-off-by: -
Daniel Vetter authored
Backmerge because Chris Wilson needs the very latest&greates of Gustavo Padovan's sync_file work, specifically the refcounting changes from: commit 30cd85dd Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Date: Wed Oct 19 15:48:32 2016 -0200 dma-buf/sync_file: hold reference to fence when creating sync_file Also good to sync in general since git tends to get confused with the cherry-picking going on. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com>
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
- first slice of the gvt device model (Zhenyu et al) - compression support for gpu error states (Chris) - sunset clause on gpu errors resulting in dmesg noise telling users how to report them - .rodata diet from Tvrtko - switch over lots of macros to only take dev_priv (Tvrtko) - underrun suppression for dp link training (Ville) - lspcon (hmdi 2.0 on skl/bxt) support from Shashank Sharma, polish from Jani - gen9 wm fixes from Paulo&Lyude - updated ddi programming for kbl (Rodrigo) - respect alternate aux/ddc pins (from vbt) for all ddi ports (Ville) * tag 'drm-intel-next-2016-10-24' of git://anongit.freedesktop.org/drm-intel: (227 commits) drm/i915: Update DRIVER_DATE to 20161024 drm/i915: Stop setting SNB min-freq-table 0 on powersave setup drm/i915/dp: add lane_count check in intel_dp_check_link_status drm/i915: Fix whitespace issues drm/i915: Clean up DDI DDC/AUX CH sanitation drm/i915: Respect alternate_ddc_pin for all DDI ports drm/i915: Respect alternate_aux_channel for all DDI ports drm/i915/gen9: Remove WaEnableYV12BugFixInHalfSliceChicken7 drm/i915: KBL - Recommended buffer translation programming for DisplayPort drm/i915: Move down skl/kbl ddi iboost and n_edp_entires fixup drm/i915: Add a sunset clause to GPU hang logging drm/i915: Stop reporting error details in dmesg as well as the error-state drm/i915/gvt: do not ignore return value of create_scratch_page drm/i915/gvt: fix spare warnings on odd constant _Bool cast drm/i915/gvt: mark symbols static where possible drm/i915/gvt: fix sparse warnings on different address spaces drm/i915/gvt: properly access enabled intel_engine_cs drm/i915/gvt: Remove defunct vmap_batch() drm/i915/gvt: Use common mapping routines for shadow_bb object drm/i915/gvt: Use common mapping routines for indirect_ctx object ...
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
First -misc pull for 4.10: - drm_format rework from Laurent - reservation patches from Chris that missed 4.9. - aspect ratio support in infoframe helpers and drm mode/edid code (Shashank Sharma) - rotation rework from Ville (first parts at least) - another attempt at the CRC debugfs interface from Tomeu - piles and piles of misc patches all over * tag 'topic/drm-misc-2016-10-24' of git://anongit.freedesktop.org/drm-intel: (55 commits) drm: Use u64 for intermediate dotclock calculations drm/i915: Use the per-plane rotation property drm/omap: Use per-plane rotation property drm/omap: Set rotation property initial value to BIT(DRM_ROTATE_0) insted of 0 drm/atmel-hlcdc: Use per-plane rotation property drm/arm: Use per-plane rotation property drm: Add support for optional per-plane rotation property drm/atomic: Reject attempts to use multiple rotation angles at once drm: Add drm_rotation_90_or_270() dma-buf/sync_file: hold reference to fence when creating sync_file drm/virtio: kconfig: Fixup white space. drm/fence: release fence reference when canceling event drm/i915: Handle early failure during intel_get_load_detect_pipe drm/fb_cma_helper: do not free fbdev if there is none drm: fix sparse warnings on undeclared symbols in crc debugfs gpu: Remove depends on RESET_CONTROLLER when not a provider i915: don't call drm_atomic_state_put on invalid pointer drm: Don't export the drm_fb_get_bpp_depth() function drm/arm: mali-dp: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp() drm: vmwgfx: Replace drm_fb_get_bpp_depth() with drm_format_info() ...
-
- 24 Oct, 2016 8 commits
-
-
Paulo Zanoni authored
Its size is 11:0 instead of 10:0. Found by inspecting the spec. I'm not aware of any real-world IGT failures caused by this. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
-
Paulo Zanoni authored
Broadwell and newer actually compress up to 2560 lines instead of 2048 (as documented in the FBC_CTL page). If we don't take this into consideration we end up reserving too little stolen memory for the CFB, so we may allocate something else (such as a ring) right after what we reserved, and the hardware will overwrite it with the contents of the CFB when FBC is active, causing GPU hangs. Another possibility is that the CFB may be allocated at the very end of the available space, so the CFB will overlap the reserved stolen area, leading to FIFO underruns. This bug has always been a problem on BDW (the only affected platform where FBC is enabled by default), but it's much easier to reproduce since the following commit: commit c58b735f Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Aug 18 17:16:57 2016 +0100 drm/i915: Allocate rings from stolen Of course, you can only reproduce the bug if your screen is taller than 2048 lines. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98213 Fixes: a98ee793 ("drm/i915/fbc: enable FBC by default on HSW and BDW") Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: -
Chris Wilson authored
At the moment, we have dependency on the RPM as a barrier itself in both i915_gem_release_all_mmaps() and i915_gem_restore_fences(). i915_gem_restore_fences() is also called along !runtime pm paths, but we can move the markup of lost fences alongside releasing the mmaps into a common i915_gem_runtime_suspend(). This has the advantage of locating all the tricky barrier dependencies into one location. v2: Just mark the fence as invalid (fence->dirty) so that upon waking we will be sure to clear the fence after use, or restore it to the correct value before use. This makes sure that if the fence is left intact across the sleep, we do not leave it pointing to a region of GTT for the next unsuspecting user. Suggested-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Imre Deak <imre.deak@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161024124218.18252-5-chris@chris-wilson.co.uk
-
Chris Wilson authored
We only used the RPM sequence checking inside the lowlevel GTT accessors, when we had to rely on callers taking the wakeref on our behalf. Now that we take the RPM wakeref inside the GTT management routines themselves, we can forgo the sanitycheck of the callers. Signed-off-by:
-
Chris Wilson authored
Now that we have reduced the access to the list to either (a) under the struct_mutex whilst holding the RPM wakeref (so that concurrent writers to the list are serialised by struct_mutex) and (b) under the atomic runtime suspend (which cannot run concurrently with any other accessor due to the atomic nature of the runtime suspend) we can remove the extra locking around the list itself. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161024124218.18252-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
We can remove the false coupling between RPM and struct mutex by the observation that we can use the RPM wakeref as the barrier around user mmap access. That is as we tear down the user's PTE atomically from within rpm suspend and then to fault in new PTE requires the rpm wakeref, means that no user access is possible through those PTE without RPM being awake. Having made that observation, we can then remove the presumption of having to take rpm outside of struct_mutex and so allow fine grained acquisition of a wakeref around hw access rather than having to remember to acquire the wakeref early on. v2: Rejig placement of the new intel_runtime_pm_get() to be as tight as possible around the GTT pread/pwrite. Signed-off-by:
Daniel Vetter <daniel@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161024124218.18252-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
We want to decouple RPM and struct_mutex, but currently RPM has to walk the list of bound objects and remove userspace mmapping before we suspend (otherwise userspace may continue to access the GTT whilst it is powered down). This currently requires the struct_mutex to walk the bound_list, but if we move that to a separate list and lock we can take the first step towards removing the struct_mutex. v2: Split runtime suspend unmapping vs regular unmapping, to make the locking (and barriers) clearer. Add the object to the userfault_list prior to inserting the first PTE, the race between add/revoke depends upon struct_mutex for regular unmappings and rpm for runtime-suspend. Signed-off-by:
-
Jani Nikula authored
We haven't required AGP since 3e99a6b9 ("drm/i915: Stop depending upon CONFIG_AGP_INTEL"). Split/rearrange the paragraphs a bit while at it. Reviewed-by:
-
