- 28 Jun, 2024 1 commit
-
-
Hans Verkuil authored
The documentation contained several instances of "section X" references, which no longer map to whatever X was. Replace these by the section titles. Also fix a single confusing typo in the "Radio & RDS Looping" section: "are regular frequency intervals" -> "at regular frequency intervals" Signed-off-by:Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
- 27 Jun, 2024 13 commits
-
-
Hans Verkuil authored
This reverts commit 77d32b7e. This patch is obviously wrong (causes array accesses at index -1), and I caught that just too late.
-
Laurent Pinchart authored
To support sources that implement the .enable_streams() and .disable_streams() operations, replace the manual calls to the subdev .s_stream() operation with the v4l2_subdev_enable_streams() and v4l2_subdev_disable_streams() helpers. The helpers fall back to .s_stream() if the source doesn't implement the new operations, so backward compatibility is preserved. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by:
Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Alain Volmat authored
Use CCI_REG16_LE macro in order to access little-endian encoded registers of the P3 (CSI) section. Signed-off-by:
Alain Volmat <alain.volmat@foss.st.com> Signed-off-by:
-
Alain Volmat authored
Adds support for RAW8 formats (BGGR/RGGB/RBRG/BRBG). Signed-off-by:
-
Alain Volmat authored
Correct error handling within the dcmipp_create_subdevs by properly decrementing the i counter when releasing the subdeves. Fixes: 28e0f377 ("media: stm32-dcmipp: STM32 DCMIPP camera interface driver") Cc: stable@vger.kernel.org Signed-off-by:
-
Jacopo Mondi authored
Add documentation for the PiSP Back End memory-to-memory ISP. Signed-off-by:
Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by:
-
Naushir Patuck authored
Add support for the Raspberry Pi PiSP Back End. The driver has been upported from the Raspberry Pi kernel at revision f74893f8a0c2 ("drivers: media: pisp_be: Update seqeuence numbers of the buffers"). The ISP documentation is available at: https://datasheets.raspberrypi.com/camera/raspberry-pi-image-signal-processor-specification.pdfSigned-off-by:David Plowman <david.plowman@raspberrypi.com> Signed-off-by:
Naushir Patuck <naush@raspberrypi.com> Signed-off-by:
Nick Hollinghurst <nick.hollinghurst@raspberrypi.org> Signed-off-by:
-
Jacopo Mondi authored
Add bindings for the Raspberry Pi PiSP Back End memory-to-memory image signal processor. Datasheet: https://datasheets.raspberrypi.com/camera/raspberry-pi-image-signal-processor-specification.pdfSigned-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Jacopo Mondi authored
Add Raspberry Pi compressed RAW Bayer formats. The compression algorithm description is provided by Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> from Raspberry Pi. Signed-off-by:
-
Jacopo Mondi authored
Add format description for the PiSP Back End configuration parameter buffer. Signed-off-by:
-
Jacopo Mondi authored
Add the Raspberry Pi PiSP Back End uAPI header. The header defines the data type used to configure the PiSP Back End ISP. The detailed description of the types and of the ISP configuration procedure is available at https://datasheets.raspberrypi.com/camera/raspberry-pi-image-signal-processor-specification.pdfSigned-off-by:
-
Jacopo Mondi authored
Add BGR48 and RGB48 16-bit per component image formats. Signed-off-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by:
-
Jacopo Mondi authored
The Y10P, Y12P and Y14P format variants are packed according to the RAW10, RAW12 and RAW14 formats as defined by the MIPI CSI-2 specification. Document it. Signed-off-by:
-
- 26 Jun, 2024 16 commits
-
-
Hans Verkuil authored
While queue_setup was correct for CREATE_BUFS support for video devices, for VBI, SDR and touch devices it was wrong. This was found after adding new v4l2-compliance tests. Signed-off-by: -
Hans Verkuil authored
In several places a division by fmt->vdownsampling[p] was missing in the sizeimage[p] calculation, causing incorrect behavior for multiplanar formats were some planes are smaller than the first plane. Found by new v4l2-compliance tests. Signed-off-by: -
Laurent Pinchart authored
Store the active formats and crop rectangle in the subdevice active state. This simplifies implementation of the format and selection accessors, and allows using the v4l2_subdev_get_fmt() helper to implement the .get_fmt() operation. The active configuration that is used in the .process_frame() handler is still stored in the vimc_scaler_device structure. The driver could instead access the active state in the .process_frame() handler, but the required locking could interfere with the real time constraints of the frame processing. This data would be stored in registers in the .s_stream() handler for real hardware, storing it in dedicated storage thus mimics a real driver. To differentiate them from the rest of the device private data, move the corresponding fields to a sub-structure of vimc_scaler_device named hw. Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
Laurent Pinchart authored
Store the active formats and crop rectangle in the subdevice active state. This simplifies implementation of the format and selection accessors, and allows using the v4l2_subdev_get_fmt() helper to implement the .get_fmt() operation. The active configuration that is used in the .process_frame() handler is still stored in the vimc_debayer_device structure. The driver could instead access the active state in the .process_frame() handler, but the required locking could interfere with the real time constraints of the frame processing. This data would be stored in registers in the .s_stream() handler for real hardware, storing it in dedicated storage thus mimics a real driver. To differentiate them from the rest of the device private data, move the corresponding fields to a sub-structure of vimc_debayer_device named hw. Signed-off-by:
-
Laurent Pinchart authored
Store the active formats and crop rectangle in the subdevice active state. This simplifies implementation of the format and selection accessors, and allows using the v4l2_subdev_get_fmt() helper to implement the .get_fmt() operation. The active configuration that is used in the .process_frame() handler is still stored in the vimc_sensor_device structure. The driver could instead access the active state in the .process_frame() handler, but the required locking could interfere with the real time constraints of the frame processing. This data would be stored in registers in the .s_stream() handler for real hardware, storing it in dedicated storage thus mimics a real driver. To differentiate them from the rest of the device private data, move the corresponding fields to a sub-structure of vimc_sensor_device named hw. Signed-off-by:
-
Laurent Pinchart authored
Finalize subdev initialization for all subdevs that provide a .init_state() operation. This creates an active state for all those subdevs, which subsequent patches will use to simplify the implementation of individual vimc entities. Signed-off-by:
-
Laurent Pinchart authored
Initialize the subdev internal_ops field in the vimc_ent_sd_register() function. This handles the internal ops the same way as the subdev ops, and prepares for moving to the V4L2 subdev active state API. Signed-off-by:
-
Laurent Pinchart authored
The vic_sca_pad enum's name has been shortened to the extreme for no good reason. Rename it to vimc_scaler_pad. Signed-off-by:
-
Laurent Pinchart authored
The ent_config array contains data that is never modified. Make it const. Signed-off-by:
-
Laurent Pinchart authored
The vimc_ent_type structure contains static pointers to functions, and no other information that need to be modified after initialization. Make them const to avoid the risk of arbitrary code execution following an overflow that would overwrite the structure's contents. Signed-off-by:
-
Laurent Pinchart authored
The .init_state() operations of the debayer and sensor entities iterate over the entity's pads. In practice, the iteration covers a single pad only. Access the pad directly and remove the loops. Signed-off-by:
-
Hans Verkuil authored
Merge tag 'tags/next-media-20240626' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git - fix typo in v4l2-subdev.h - imx-pxp bug fix - media i2c Kconfig: add missing FW_UPLOAD select Signed-off-by:
-
Hans Verkuil authored
Merge tag 'tags/next-media-renesas-20240619' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git - Conversion of max9286 and adv748x to V4L2 subdev active state - Cleanups and fixes for the Renesas R-Car VSP and VIN drivers - Miscellaneous cleanups to V4L2 core Signed-off-by:
-
Laurent Pinchart authored
Replace the incorrect reference to the v4l2_subdev_enable_stream() function with the correct v4l2_subdev_enable_streams() spelling. Fixes: d0749adb ("media: v4l2-subdev: Add subdev .(enable|disable)_streams() operations") Reviewed-by:
-
Kory Maincent authored
FW_LOADER config only selects the firmware loader API, but we also need the sysfs_upload symbols for firmware_upload_unregister() and firmware_upload_register() to function properly. Fixes: 7a52ab41 ("media: i2c: Add driver for THine THP7312") Cc: stable@vger.kernel.org Signed-off-by:
Kory Maincent <kory.maincent@bootlin.com> Reviewed-by:
Paul Elder <paul.elder@ideasonboard.com> Link: https://lore.kernel.org/r/20240620102544.1918105-1-kory.maincent@bootlin.comSigned-off-by:
-
Harshit Mogalapalli authored
devm_regmap_init_mmio() can fail, add a check and bail out in case of error. Fixes: 4e5bd3fd ("media: imx-pxp: convert to regmap") Cc: stable@vger.kernel.org Signed-off-by:
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by:
-
- 24 Jun, 2024 10 commits
-
-
Wolfram Sang authored
The email address bounced. I couldn't find a newer one in recent git history, so update MAINTAINERS accordingly. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Samuel Wein authored
Fix flags in X1 Yoga example. MEDIA_LNK_FL_DYNAMIC (0x4 in the link flag) was removed in V4 Intel IPU6 and IPU6 input system drivers. Added -V flag to media-ctl commands for X1 Yoga, lower-case v only makes it verbose upper-case V sets the format. Signed-off-by:
Samuel Wein <sam@samwein.com> [Sakari Ailus: Align subject line, rewrap commit message.] Signed-off-by:
-
Zhi Mao authored
Add a V4L2 sub-device driver for Galaxycore GC05A2 image sensor. Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
Zhi Mao <zhi.mao@mediatek.com> [Sakari Ailus: Fold in MAINTAINERS change.] Signed-off-by:
-
Zhi Mao authored
Add YAML device tree binding for GC05A2 CMOS image sensor, and the relevant MAINTAINERS entries. Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
-
Zhi Mao authored
Add a V4L2 sub-device driver for Galaxycore GC08A3 image sensor. Reviewed-by:
-
Zhi Mao authored
Add YAML device tree binding for GC08A3 CMOS image sensor, and the relevant MAINTAINERS entries. Reviewed-by:
-
Hans Verkuil authored
smatch generated this warning: drivers/media/usb/b2c2/flexcop-usb.c:199 flexcop_usb_memory_req() warn: iterator 'i' not incremented and indeed the function is not using i or updating buf. The reason this always worked is that this function is called to write just 6 bytes (a MAC address) to the USB device, and so in practice there is only a single chunk written. If we ever would need to write more than one chunk, this function would fail since each chunk would read from or write to the same buf address. Rewrite the function to properly handle this. Signed-off-by: -
Devarsh Thakkar authored
Use v4l2-jpeg core API to import reference quantization and huffman tables used for JPEG Encoding. Signed-off-by:
Devarsh Thakkar <devarsht@ti.com> Reviewed-by:
Chen-Yu Tsai <wenst@chromium.org> Acked-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by:
Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by:
-
Devarsh Thakkar authored
Use exported huffman and quantization tables from v4l2-jpeg core library. Signed-off-by:
-
Devarsh Thakkar authored
Enable documentation for v4l2-jpeg header related helper functions which are useful for parsing jpeg files while decoding or creating jpeg headers while encoding. Signed-off-by:
-
