- 21 Apr, 2017 40 commits
-
-
Herbert Xu authored
commit e6534aeb upstream. The algif_aead completion function tries to deduce the aead_request from the crypto_async_request argument. This is broken because the API does not guarantee that the same request will be pased to the completion function. Only the value of req->data can be used in the completion function. This patch fixes it by storing a pointer to sk in areq and using that instead of passing in sk through req->data. Fixes: 83094e5e ("crypto: af_alg - add async support to...") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Namhyung Kim authored
commit d879d0b8 upstream. When function tracer has a pid filter, it adds a probe to sched_switch to track if current task can be ignored. The probe checks the ftrace_ignore_pid from current tr to filter tasks. But it misses to delete the probe when removing an instance so that it can cause a crash due to the invalid tr pointer (use-after-free). This is easily reproducible with the following: # cd /sys/kernel/debug/tracing # mkdir instances/buggy # echo $$ > instances/buggy/set_ftrace_pid # rmdir instances/buggy ============================================================================ BUG: KASAN: use-after-free in ftrace_filter_pid_sched_switch_probe+0x3d/0x90 Read of size 8 by task kworker/0:1/17 CPU: 0 PID: 17 Comm: kworker/0:1 Tainted: G B 4.11.0-rc3 #198 Call Trace: dump_stack+0x68/0x9f kasan_object_err+0x21/0x70 kasan_report.part.1+0x22b/0x500 ? ftrace_filter_pid_sched_switch_probe+0x3d/0x90 kasan_report+0x25/0x30 __asan_load8+0x5e/0x70 ftrace_filter_pid_sched_switch_probe+0x3d/0x90 ? fpid_start+0x130/0x130 __schedule+0x571/0xce0 ... To fix it, use ftrace_clear_pids() to unregister the probe. As instance_rmdir() already updated ftrace codes, it can just free the filter safely. Link: http://lkml.kernel.org/r/20170417024430.21194-2-namhyung@kernel.org Fixes: 0c8916c3 ("tracing: Add rmdir to remove multibuffer instances") Cc: Ingo Molnar <mingo@kernel.org> Reviewed-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Minchan Kim authored
commit d72e9a7a upstream. The copy_page is optimized memcpy for page-alinged address. If it is used with non-page aligned address, it can corrupt memory which means system corruption. With zram, it can happen with 1. 64K architecture 2. partial IO 3. slub debug Partial IO need to allocate a page and zram allocates it via kmalloc. With slub debug, kmalloc(PAGE_SIZE) doesn't return page-size aligned address. And finally, copy_page(mem, cmem) corrupts memory. So, this patch changes it to memcpy. Actuaully, we don't need to change zram_bvec_write part because zsmalloc returns page-aligned address in case of PAGE_SIZE class but it's not good to rely on the internal of zsmalloc. Note: When this patch is merged to stable, clear_page should be fixed, too. Unfortunately, recent zram removes it by "same page merge" feature so it's hard to backport this patch to -stable tree. I will handle it when I receive the mail from stable tree maintainer to merge this patch to backport. Fixes: 42e99bd9 ("zram: optimize memory operations with clear_page()/copy_page()") Link: http://lkml.kernel.org/r/1492042622-12074-2-git-send-email-minchan@kernel.orgSigned-off-by:
Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit b576c583 which is commit 6c356eda upstream. It shouldn't have been included in a stable release. Reported-by:
Amit Pundir <amit.pundir@linaro.org> Cc: Felix Fietkau <nbd@nbd.name> Cc: John Crispin <john@phrozen.org> Cc: James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
Max Bires authored
commit f2cfa58b upstream. Without a bool string present, using "# CONFIG_DEVPORT is not set" in defconfig files would not actually unset devport. This esnured that /dev/port was always on, but there are reasons a user may wish to disable it (smaller kernel, attack surface reduction) if it's not being used. Adding a message here in order to make this user visible. Signed-off-by:
Max Bires <jbires@google.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Min He authored
commit a34f8363 upstream. Fix wrong initial csb read pointer value. This fixes the random engine timeout issue in guest when guest boots up. Fixes: 8453d674 ("drm/i915/gvt: vGPU execlist virtualization") Signed-off-by:
Min He <min.he@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 82cc4fc2 upstream. When two function probes are added to set_ftrace_filter, and then one of them is removed, the update to the function locations is not performed, and the record keeping of the function states are corrupted, and causes an ftrace_bug() to occur. This is easily reproducable by adding two probes, removing one, and then adding it back again. # cd /sys/kernel/debug/tracing # echo schedule:traceoff > set_ftrace_filter # echo do_IRQ:traceoff > set_ftrace_filter # echo \!do_IRQ:traceoff > /debug/tracing/set_ftrace_filter # echo do_IRQ:traceoff > set_ftrace_filter Causes: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1098 at kernel/trace/ftrace.c:2369 ftrace_get_addr_curr+0x143/0x220 Modules linked in: [...] CPU: 2 PID: 1098 Comm: bash Not tainted 4.10.0-test+ #405 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012 Call Trace: dump_stack+0x68/0x9f __warn+0x111/0x130 ? trace_irq_work_interrupt+0xa0/0xa0 warn_slowpath_null+0x1d/0x20 ftrace_get_addr_curr+0x143/0x220 ? __fentry__+0x10/0x10 ftrace_replace_code+0xe3/0x4f0 ? ftrace_int3_handler+0x90/0x90 ? printk+0x99/0xb5 ? 0xffffffff81000000 ftrace_modify_all_code+0x97/0x110 arch_ftrace_update_code+0x10/0x20 ftrace_run_update_code+0x1c/0x60 ftrace_run_modify_code.isra.48.constprop.62+0x8e/0xd0 register_ftrace_function_probe+0x4b6/0x590 ? ftrace_startup+0x310/0x310 ? debug_lockdep_rcu_enabled.part.4+0x1a/0x30 ? update_stack_state+0x88/0x110 ? ftrace_regex_write.isra.43.part.44+0x1d3/0x320 ? preempt_count_sub+0x18/0xd0 ? mutex_lock_nested+0x104/0x800 ? ftrace_regex_write.isra.43.part.44+0x1d3/0x320 ? __unwind_start+0x1c0/0x1c0 ? _mutex_lock_nest_lock+0x800/0x800 ftrace_trace_probe_callback.isra.3+0xc0/0x130 ? func_set_flag+0xe0/0xe0 ? __lock_acquire+0x642/0x1790 ? __might_fault+0x1e/0x20 ? trace_get_user+0x398/0x470 ? strcmp+0x35/0x60 ftrace_trace_onoff_callback+0x48/0x70 ftrace_regex_write.isra.43.part.44+0x251/0x320 ? match_records+0x420/0x420 ftrace_filter_write+0x2b/0x30 __vfs_write+0xd7/0x330 ? do_loop_readv_writev+0x120/0x120 ? locks_remove_posix+0x90/0x2f0 ? do_lock_file_wait+0x160/0x160 ? __lock_is_held+0x93/0x100 ? rcu_read_lock_sched_held+0x5c/0xb0 ? preempt_count_sub+0x18/0xd0 ? __sb_start_write+0x10a/0x230 ? vfs_write+0x222/0x240 vfs_write+0xef/0x240 SyS_write+0xab/0x130 ? SyS_read+0x130/0x130 ? trace_hardirqs_on_caller+0x182/0x280 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x18/0xad RIP: 0033:0x7fe61c157c30 RSP: 002b:00007ffe87890258 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: ffffffff8114a410 RCX: 00007fe61c157c30 RDX: 0000000000000010 RSI: 000055814798f5e0 RDI: 0000000000000001 RBP: ffff8800c9027f98 R08: 00007fe61c422740 R09: 00007fe61ca53700 R10: 0000000000000073 R11: 0000000000000246 R12: 0000558147a36400 R13: 00007ffe8788f160 R14: 0000000000000024 R15: 00007ffe8788f15c ? trace_hardirqs_off_caller+0xc0/0x110 ---[ end trace 99fa09b3d9869c2c ]--- Bad trampoline accounting at: ffffffff81cc3b00 (do_IRQ+0x0/0x150) Fixes: 59df055f ("ftrace: trace different functions with a different tracer") Signed-off-by:
-
Tyler Baker authored
commit 75eb5e1e upstream. The raw_spinlock in the IMX GPCV2 interupt chip is not initialized before usage. That results in a lockdep splat: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Add the missing raw_spin_lock_init() to the setup code. Fixes: e324c4dc ("irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources") Signed-off-by:
Tyler Baker <tyler.baker@linaro.org> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: shawnguo@kernel.org Cc: andrew.smirnov@gmail.com Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20170413222731.5917-1-tyler.baker@linaro.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Chen Yu authored
commit c4a3fa26 upstream. There is a report that after commit 27622b06 ("cpufreq: Convert to hotplug state machine"), the normal CPU offline/online cycle fails on some platforms. According to the ftrace result, this problem was triggered on platforms using acpi-cpufreq as the default cpufreq driver, and due to the lack of some ACPI freq method (eg. _PCT), cpufreq_online() failed and returned a negative value, so the CPU hotplug state machine rolled back the CPU online process. Actually, from the user's perspective, the failure of cpufreq_online() should not prevent that CPU from being brought up, although cpufreq might not work on that CPU. BTW, during system startup cpufreq_online() is not invoked via CPU online but by the cpufreq device creation process, so the APs can be brought up even though cpufreq_online() fails in that stage. This patch ignores the return value of cpufreq_online/offline() and lets the cpufreq framework deal with the failure. cpufreq_online() itself will do a proper rollback in that case and if _PCT is missing, the ACPI cpufreq driver will print a warning if the corresponding debug options have been enabled. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=194581 Fixes: 27622b06 ("cpufreq: Convert to hotplug state machine") Reported-and-tested-by:
Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by:
Chen Yu <yu.c.chen@intel.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
David Wu authored
commit a900152b upstream. If the PWM was not enabled at U-Boot loader, PWM could not work for clock always disabled at PWM driver. The PWM clock is enabled at beginning of pwm_apply(), but disabled at end of pwm_apply(). If the PWM was enabled at U-Boot loader, PWM clock is always enabled unless closed by ATF. The pwm-backlight might turn off the power at early suspend, should disable PWM clock for saving power consume. It is important to provide opportunity to enable/disable clock at PWM driver, the PWM consumer should ensure correct order to call PWM enable and disable, and PWM driver ensure state of PWM clock synchronized with PWM enabled state. Fixes: 2bf1c98a ("pwm: rockchip: Add support for atomic update") Signed-off-by:
David Wu <david.wu@rock-chips.com> Reviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Markus Marb authored
commit 57c1d4c3 upstream. The incorrect offset was used when trying to read the RXSTCMD register. Signed-off-by:
Markus Marb <markus@marb.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Dan Williams authored
commit 4aa5615e upstream. The following warning results from holding a lane spinlock, preempt_disable(), or the btt map spinlock and then trying to take the reconfig_mutex to walk the poison list and potentially add new entries. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:747 in_atomic(): 1, irqs_disabled(): 0, pid: 17159, name: dd [..] Call Trace: dump_stack+0x85/0xc8 ___might_sleep+0x184/0x250 __might_sleep+0x4a/0x90 __mutex_lock+0x58/0x9b0 ? nvdimm_bus_lock+0x21/0x30 [libnvdimm] ? __nvdimm_bus_badblocks_clear+0x2f/0x60 [libnvdimm] ? acpi_nfit_forget_poison+0x79/0x80 [nfit] ? _raw_spin_unlock+0x27/0x40 mutex_lock_nested+0x1b/0x20 nvdimm_bus_lock+0x21/0x30 [libnvdimm] nvdimm_forget_poison+0x25/0x50 [libnvdimm] nvdimm_clear_poison+0x106/0x140 [libnvdimm] nsio_rw_bytes+0x164/0x270 [libnvdimm] btt_write_pg+0x1de/0x3e0 [nd_btt] ? blk_queue_enter+0x30/0x290 btt_make_request+0x11a/0x310 [nd_btt] ? blk_queue_enter+0xb7/0x290 ? blk_queue_enter+0x30/0x290 generic_make_request+0x118/0x3b0 As a minimal fix, disable error clearing when the BTT is enabled for the namespace. For the final fix a larger rework of the poison list locking is needed. Note that this is not a problem in the blk case since that path never calls nvdimm_clear_poison(). Fixes: 82bf1037 ("libnvdimm: check and clear poison before writing to pmem") Cc: Dave Jiang <dave.jiang@intel.com> [jeff: dynamically disable error clearing in the btt case] Suggested-by:
Jeff Moyer <jmoyer@redhat.com> Reviewed-by:
Vishal Verma <vishal.l.verma@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Dan Williams authored
commit 0beb2012 upstream. Holding the reconfig_mutex over a potential userspace fault sets up a lockdep dependency chain between filesystem-DAX and the libnvdimm ioctl path. Move the user access outside of the lock. [ INFO: possible circular locking dependency detected ] 4.11.0-rc3+ #13 Tainted: G W O ------------------------------------------------------- fallocate/16656 is trying to acquire lock: (&nvdimm_bus->reconfig_mutex){+.+.+.}, at: [<ffffffffa00080b1>] nvdimm_bus_lock+0x21/0x30 [libnvdimm] but task is already holding lock: (jbd2_handle){++++..}, at: [<ffffffff813b4944>] start_this_handle+0x104/0x460 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (jbd2_handle){++++..}: lock_acquire+0xbd/0x200 start_this_handle+0x16a/0x460 jbd2__journal_start+0xe9/0x2d0 __ext4_journal_start_sb+0x89/0x1c0 ext4_dirty_inode+0x32/0x70 __mark_inode_dirty+0x235/0x670 generic_update_time+0x87/0xd0 touch_atime+0xa9/0xd0 ext4_file_mmap+0x90/0xb0 mmap_region+0x370/0x5b0 do_mmap+0x415/0x4f0 vm_mmap_pgoff+0xd7/0x120 SyS_mmap_pgoff+0x1c5/0x290 SyS_mmap+0x22/0x30 entry_SYSCALL_64_fastpath+0x1f/0xc2 -> #1 (&mm->mmap_sem){++++++}: lock_acquire+0xbd/0x200 __might_fault+0x70/0xa0 __nd_ioctl+0x683/0x720 [libnvdimm] nvdimm_ioctl+0x8b/0xe0 [libnvdimm] do_vfs_ioctl+0xa8/0x740 SyS_ioctl+0x79/0x90 do_syscall_64+0x6c/0x200 return_from_SYSCALL_64+0x0/0x7a -> #0 (&nvdimm_bus->reconfig_mutex){+.+.+.}: __lock_acquire+0x16b6/0x1730 lock_acquire+0xbd/0x200 __mutex_lock+0x88/0x9b0 mutex_lock_nested+0x1b/0x20 nvdimm_bus_lock+0x21/0x30 [libnvdimm] nvdimm_forget_poison+0x25/0x50 [libnvdimm] nvdimm_clear_poison+0x106/0x140 [libnvdimm] pmem_do_bvec+0x1c2/0x2b0 [nd_pmem] pmem_make_request+0xf9/0x270 [nd_pmem] generic_make_request+0x118/0x3b0 submit_bio+0x75/0x150 Fixes: 62232e45 ("libnvdimm: control (ioctl) messages for nvdimm_bus and nvdimm devices") Cc: Dave Jiang <dave.jiang@intel.com> Reported-by:
-
Dan Williams authored
commit fe514739 upstream. Commit a1f3e4d6 "libnvdimm, region: update nd_region_available_dpa() for multi-pmem support" reworked blk dpa (DIMM Physical Address) accounting to comprehend multiple pmem namespace allocations aliasing with a given blk-dpa range. The following call trace is a result of failing to account for allocated blk capacity. WARNING: CPU: 1 PID: 2433 at tools/testing/nvdimm/../../../drivers/nvdimm/names 4 size_store+0x6f3/0x930 [libnvdimm] nd_region region5: allocation underrun: 0x0 of 0x1000000 bytes [..] Call Trace: dump_stack+0x86/0xc3 __warn+0xcb/0xf0 warn_slowpath_fmt+0x5f/0x80 size_store+0x6f3/0x930 [libnvdimm] dev_attr_store+0x18/0x30 If a given blk-dpa allocation does not alias with any pmem ranges then the full allocation should be accounted as busy space, not the size of the current pmem contribution to the region. The thinkos that led to this confusion was not realizing that the struct resource management is already guaranteeing no collisions between pmem allocations and blk allocations on the same dimm. Also, we do not try to support blk allocations in aliased pmem holes. This patch also fixes a case where the available blk goes negative. Fixes: a1f3e4d6 ("libnvdimm, region: update nd_region_available_dpa() for multi-pmem support"). Reported-by:
Dariusz Dokupil <dariusz.dokupil@intel.com> Reported-by:
Dave Jiang <dave.jiang@intel.com> Reported-by:
-
Al Viro authored
commit 32786821 upstream. Fixes the mess observed in e.g. rsync over a noisy link we'd been seeing since last Summer. What happens is that we copy part of a datagram before noticing a checksum mismatch. Datagram will be resent, all right, but we want the next try go into the same place, not after it... All this family of primitives (copy/checksum and copy a datagram into destination) is "all or nothing" sort of interface - either we get 0 (meaning that copy had been successful) or we get an error (and no way to tell how much had been copied before we ran into whatever error it had been). Make all of them leave iterator unadvanced in case of errors - all callers must be able to cope with that (an error might've been caught before the iterator had been advanced), it costs very little to arrange, it's safer for callers and actually fixes at least one bug in said callers. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
commit 27c0e374 upstream. opposite to iov_iter_advance(); the caller is responsible for never using it to move back past the initial position. Signed-off-by:
-
Juergen Gross authored
commit 9121b15b upstream. Connecting to the backend isn't working reliably in xen-fbfront: in case XenbusStateInitWait of the backend has been missed the backend transition to XenbusStateConnected will trigger the connected state only without doing the actions required when the backend has connected. Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Nicholas Bellinger authored
commit 49cb77e2 upstream. This patch closes a race between se_lun deletion during configfs unlink in target_fabric_port_unlink() -> core_dev_del_lun() -> core_tpg_remove_lun(), when transport_clear_lun_ref() blocks waiting for percpu_ref RCU grace period to finish, but a new NodeACL mappedlun is added before the RCU grace period has completed. This can happen in target_fabric_mappedlun_link() because it only checks for se_lun->lun_se_dev, which is not cleared until after transport_clear_lun_ref() percpu_ref RCU grace period finishes. This bug originally manifested as NULL pointer dereference OOPsen in target_stat_scsi_att_intr_port_show_attr_dev() on v4.1.y code, because it dereferences lun->lun_se_dev without a explicit NULL pointer check. In post v4.1 code with target-core RCU conversion, the code in target_stat_scsi_att_intr_port_show_attr_dev() no longer uses se_lun->lun_se_dev, but the same race still exists. To address the bug, go ahead and set se_lun>lun_shutdown as early as possible in core_tpg_remove_lun(), and ensure new NodeACL mappedlun creation in target_fabric_mappedlun_link() fails during se_lun shutdown. Reported-by:
James Shen <jcs@datera.io> Cc: James Shen <jcs@datera.io> Tested-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Martin K. Petersen authored
commit 7c856152 upstream. We previously made sure that the reported disk capacity was less than 0xffffffff blocks when the kernel was not compiled with large sector_t support (CONFIG_LBDAF). However, this check assumed that the capacity was reported in units of 512 bytes. Add a sanity check function to ensure that we only enable disks if the entire reported capacity can be expressed in terms of sector_t. Reported-by:
Steve Magnani <steve.magnani@digidescorp.com> Cc: Bart Van Assche <Bart.VanAssche@sandisk.com> Reviewed-by:
Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Sawan Chandak authored
commit bf6061b1 upstream. Add fix to read correct register value for ISP82xx, during check for register disconnect.ISP82xx has different base register. Fixes: a465537a ("qla2xxx: Disable the adapter and skip error recovery in case of register disconnect") Signed-off-by:
Sawan Chandak <sawan.chandak@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
-
Fam Zheng authored
commit 67804145 upstream. If device reports a small max_xfer_blocks and a zero opt_xfer_blocks, we end up using BLK_DEF_MAX_SECTORS, which is wrong and r/w of that size may get error. [mkp: tweaked to avoid setting rw_max twice and added typecast] Fixes: ca369d51 ("block/sd: Fix device-imposed transfer length limits") Signed-off-by:
Fam Zheng <famz@redhat.com> Signed-off-by:
-
Martin K. Petersen authored
commit a00a7862 upstream. Kefeng Wang discovered that old versions of the QEMU CD driver would return mangled mode data causing us to walk off the end of the buffer in an attempt to parse it. Sanity check the returned mode sense data. Reported-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by:
-
Nicholas Bellinger authored
commit 1c99de98 upstream. Once upon a time back in 2009, a work-around was added to support the GlobalSAN iSCSI initiator v3.3 for MacOSX, which during login did not propose nor respond to MaxBurstLength, FirstBurstLength, DefaultTime2Wait and DefaultTime2Retain keys. The work-around in iscsi_check_proposer_for_optional_reply() allowed the missing keys to be proposed, but did not require waiting for a response before moving to full feature phase operation. This allowed GlobalSAN v3.3 to work out-of-the box, and for many years we didn't run into login interopt issues with any other initiators.. Until recently, when Martin tried a QLogic 57840S iSCSI Offload HBA on Windows 2016 which completed login, but subsequently failed with: Got unknown iSCSI OpCode: 0x43 The issue was QLogic MSFT side did not propose DefaultTime2Wait + DefaultTime2Retain, so LIO proposes them itself, and immediately transitions to full feature phase because of the GlobalSAN hack. However, the QLogic MSFT side still attempts to respond to DefaultTime2Retain + DefaultTime2Wait, even though LIO has set ISCSI_FLAG_LOGIN_NEXT_STAGE3 + ISCSI_FLAG_LOGIN_TRANSIT in last login response. So while the QLogic MSFT side should have been proposing these two keys to start, it was doing the correct thing per RFC-3720 attempting to respond to proposed keys before transitioning to full feature phase. All that said, recent versions of GlobalSAN iSCSI (v5.3.0.541) does correctly propose the four keys during login, making the original work-around moot. So in order to allow QLogic MSFT to run unmodified as-is, go ahead and drop this long standing work-around. Reported-by:
Martin Svec <martin.svec@zoner.cz> Cc: Martin Svec <martin.svec@zoner.cz> Cc: Himanshu Madhani <Himanshu.Madhani@cavium.com> Cc: Arun Easi <arun.easi@cavium.com> Signed-off-by:
-
Nicholas Bellinger authored
commit efb2ea77 upstream. This patch fixes a iscsi-target specific TMR reference leak during session shutdown, that could occur when a TMR was quiesced before the hand-off back to iscsi-target code via transport_cmd_check_stop_to_fabric(). The reference leak happens because iscsit_free_cmd() was incorrectly skipping the final target_put_sess_cmd() for TMRs when transport_generic_free_cmd() returned zero because the se_cmd->cmd_kref did not reach zero, due to the missing se_cmd assignment in original code. The result was iscsi_cmd and it's associated se_cmd memory would be freed once se_sess->sess_cmd_map where released, but the associated se_tmr_req was leaked and remained part of se_device->dev_tmr_list. This bug would manfiest itself as kernel paging request OOPsen in core_tmr_lun_reset(), when a left-over se_tmr_req attempted to dereference it's se_cmd pointer that had already been released during normal session shutdown. To address this bug, go ahead and treat ISCSI_OP_SCSI_CMD and ISCSI_OP_SCSI_TMFUNC the same when there is an extra se_cmd->cmd_kref to drop in iscsit_free_cmd(), and use op_scsi to signal __iscsit_free_cmd() when the former needs to clear any further iscsi related I/O state. Reported-by:
Rob Millner <rlm@daterainc.com> Cc: Rob Millner <rlm@daterainc.com> Reported-by:
Chu Yuan Lin <cyl@datera.io> Cc: Chu Yuan Lin <cyl@datera.io> Tested-by:
-
Ard Biesheuvel authored
commit 55d728a4 upstream. On UEFI systems, the PCI subsystem is enumerated by the firmware, and if a graphical framebuffer is exposed via a PCI device, its base address and size are exposed to the OS via the Graphics Output Protocol (GOP). On arm64 PCI systems, the entire PCI hierarchy is reconfigured from scratch at boot. This may result in the GOP framebuffer address to become stale, if the BAR covering the framebuffer is modified. This will cause the framebuffer to become unresponsive, and may in some cases result in unpredictable behavior if the range is reassigned to another device. So add a non-x86 quirk to the EFI fb driver to find the BAR associated with the GOP base address, and claim the BAR resource so that the PCI core will not move it. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: leif.lindholm@linaro.org Cc: linux-efi@vger.kernel.org Cc: lorenzo.pieralisi@arm.com Fixes: 9822504c ("efifb: Enable the efi-framebuffer platform driver ...") Link: http://lkml.kernel.org/r/20170404152744.26687-3-ard.biesheuvel@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Cohen, Eugene authored
commit 540f4c0e upstream. The UEFI Specification permits Graphics Output Protocol (GOP) instances without direct framebuffer access. This is indicated in the Mode structure with a PixelFormat enumeration value of PIXEL_BLT_ONLY. Given that the kernel does not know how to drive a Blt() only framebuffer (which is only permitted before ExitBootServices() anyway), we should disregard such framebuffers when looking for a GOP instance that is suitable for use as the boot console. So modify the EFI GOP initialization to not use a PIXEL_BLT_ONLY instance, preventing attempts later in boot to use an invalid screen_info.lfb_base address. Signed-off-by:
Eugene Cohen <eugene@hp.com> [ Moved the Blt() only check into the loop and clarified that Blt() only GOPs are unusable by the kernel. ] Signed-off-by:
-
Mikulas Patocka authored
commit 409c1b25 upstream. The patch 554bfece ("parisc: Fix access fault handling in pa_memcpy()") reimplements the pa_memcpy function. Unfortunatelly, it makes the kernel unbootable. The crash happens in the function ide_complete_cmd where memcpy is called with the same source and destination address. This patch fixes a few bugs in pa_memcpy: * When jumping to .Lcopy_loop_16 for the first time, don't skip the instruction "ldi 31,t0" (this bug made the kernel unbootable) * Use the COND macro when comparing length, so that the comparison is 64-bit (a theoretical issue, in case the length is greater than 0xffffffff) * Don't use the COND macro after the "extru" instruction (the PA-RISC specification says that the upper 32-bits of extru result are undefined, although they are set to zero in practice) * Fix exception addresses in .Lcopy16_fault and .Lcopy8_fault * Rename .Lcopy_loop_4 to .Lcopy_loop_8 (so that it is consistent with .Lcopy8_fault) Fixes: 554bfece ("parisc: Fix access fault handling in pa_memcpy()") Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Rafael J. Wysocki authored
commit f406270b upstream. Commit 10c7e20b (ACPI / scan: fix enumeration (visited) flags for bus rescans) attempted to fix a problem with ACPI-based enumerateion of I2C/SPI devices, but it forgot to ensure that the visited flag will be set for all of the other enumerated devices, so fix that. Fixes: 10c7e20b (ACPI / scan: fix enumeration (visited) flags for bus rescans) Link: https://bugzilla.kernel.org/show_bug.cgi?id=194885Reported-and-tested-by:
Kevin Locke <kevin@kevinlocke.name> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Dan Williams authored
commit b03b99a3 upstream. While reviewing the -stable patch for commit 86ef58a4 "nfit, libnvdimm: fix interleave set cookie calculation" Ben noted: "This is returning an int, thus it's effectively doing a 32-bit comparison and not the 64-bit comparison you say is needed." Update the compare operation to be immune to this integer demotion problem. Cc: Nicholas Moulin <nicholas.w.moulin@linux.intel.com> Fixes: 86ef58a4 ("nfit, libnvdimm: fix interleave set cookie calculation") Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Thomas Gleixner authored
commit 6fdc6dd9 upstream. The vsyscall32 sysctl can racy against a concurrent fork when it switches from disabled to enabled: arch_setup_additional_pages() if (vdso32_enabled) --> No mapping sysctl.vsysscall32() --> vdso32_enabled = true create_elf_tables() ARCH_DLINFO_IA32 if (vdso32_enabled) { --> Add VDSO entry with NULL pointer Make ARCH_DLINFO_IA32 check whether the VDSO mapping has been set up for the newly forked process or not. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathias Krause <minipli@googlemail.com> Link: http://lkml.kernel.org/r/20170410151723.602367196@linutronix.deSigned-off-by:
-
Mathias Krause authored
commit c06989da upstream. vdso_enabled can be set to arbitrary integer values via the kernel command line 'vdso32=' parameter or via 'sysctl abi.vsyscall32'. load_vdso32() only maps VDSO if vdso_enabled == 1, but ARCH_DLINFO_IA32 merily checks for vdso_enabled != 0. As a consequence the AT_SYSINFO_EHDR auxiliary vector for the VDSO_ENTRY is emitted with a NULL pointer which causes a segfault when the application tries to use the VDSO. Restrict the valid arguments on the command line and the sysctl to 0 and 1. Fixes: b0b49f26 ("x86, vdso: Remove compat vdso support") Signed-off-by:
Mathias Krause <minipli@googlemail.com> Acked-by:
-
Dan Williams authored
commit 11e63f6d upstream. Before we rework the "pmem api" to stop abusing __copy_user_nocache() for memcpy_to_pmem() we need to fix cases where we may strand dirty data in the cpu cache. The problem occurs when copy_from_iter_pmem() is used for arbitrary data transfers from userspace. There is no guarantee that these transfers, performed by dax_iomap_actor(), will have aligned destinations or aligned transfer lengths. Backstop the usage __copy_user_nocache() with explicit cache management in these unaligned cases. Yes, copy_from_iter_pmem() is now too big for an inline, but addressing that is saved for a later patch that moves the entirety of the "pmem api" into the pmem driver directly. Fixes: 5de490da ("pmem: add copy_from_iter_pmem() and clear_pmem()") Cc: <x86@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by:
Toshi Kani <toshi.kani@hpe.com> Signed-off-by:
-
Jiri Olsa authored
commit 7f00f388 upstream. The schemata lock is released before freeing the resource's temporary tmp_cbms allocation. That's racy versus another write which allocates and uses new temporary storage, resulting in memory leaks, freeing in use memory, double a free or any combination of those. Move the unlock after the release code. Fixes: 60ec2440 ("x86/intel_rdt: Add schemata file") Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20170411071446.15241-1-jolsa@kernel.orgSigned-off-by:
-
Joerg Roedel authored
commit cfac6dfa upstream. Put the right values from the original siginfo into the userspace compat-siginfo. This fixes the 32-bit MPX "tabletest" testcase on 64-bit kernels. Signed-off-by:
Joerg Roedel <jroedel@suse.de> Acked-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: a4455082 ('x86/signals: Add missing signal_compat code for x86 features') Link: http://lkml.kernel.org/r/1491322501-5054-1-git-send-email-joro@8bytes.orgSigned-off-by:
-
Omar Sandoval authored
commit 6f6266a5 upstream. Reserving a runtime region results in splitting the EFI memory descriptors for the runtime region. This results in runtime region descriptors with bogus memory mappings, leading to interesting crashes like the following during a kexec: general protection fault: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1 #53 Hardware name: Wiwynn Leopard-Orv2/Leopard-DDR BW, BIOS LBM05 09/30/2016 RIP: 0010:virt_efi_set_variable() ... Call Trace: efi_delete_dummy_variable() efi_enter_virtual_mode() start_kernel() ? set_init_arg() x86_64_start_reservations() x86_64_start_kernel() start_cpu() ... Kernel panic - not syncing: Fatal exception Runtime regions will not be freed and do not need to be reserved, so skip the memmap modification in this case. Signed-off-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
Matt Fleming <matt@codeblueprint.co.uk> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Dave Young <dyoung@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 8e80632f ("efi/esrt: Use efi_mem_reserve() and avoid a kmalloc()") Link: http://lkml.kernel.org/r/20170412152719.9779-2-matt@codeblueprint.co.ukSigned-off-by:
-
Peter Zijlstra authored
commit f2200ac3 upstream. When the perf_branch_entry::{in_tx,abort,cycles} fields were added, intel_pmu_lbr_read_32() wasn't updated to initialize them. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Fixes: 135c5612 ("perf/x86/intel: Support Haswell/v4 LBR format") Signed-off-by:
-
Christian Borntraeger authored
commit 3c1a4279 upstream. since 4.10 perf annotate exits on s390 with an "unknown error -95". Turns out that commit 786c1b51 ("perf annotate: Start supporting cross arch annotation") added a hard requirement for architecture support when objdump is used but only provided x86 and arm support. Meanwhile power was added so lets add s390 as well. While at it make sure to implement the branch and jump types. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Cc: Andreas Krebbel <krebbel@linux.vnet.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-s390 <linux-s390@vger.kernel.org> Fixes: 786c1b51 "perf annotate: Start supporting cross arch annotation" Link: http://lkml.kernel.org/r/1491465112-45819-2-git-send-email-borntraeger@de.ibm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Cameron Gutman authored
commit 53763668 upstream. Signed-off-by:
Cameron Gutman <aicommander@gmail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Germano Percossi authored
commit 1fa839b4 upstream. This fixes Continuous Availability when errors during file reopen are encountered. cifs_user_readv and cifs_user_writev would wait for ever if results of cifs_reopen_file are not stored and for later inspection. In fact, results are checked and, in case of errors, a chain of function calls leading to reads and writes to be scheduled in a separate thread is skipped. These threads will wake up the corresponding waiters once reads and writes are done. However, given the return value is not stored, when rc is checked for errors a previous one (always zero) is inspected instead. This leads to pending reads/writes added to the list, making cifs_user_readv and cifs_user_writev wait for ever. Signed-off-by:
Germano Percossi <germano.percossi@citrix.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Germano Percossi authored
commit 18ea4311 upstream. In case of error, smb2_reconnect_server reschedule itself with a delay, to avoid being too aggressive. Signed-off-by:
-
