- 17 May, 2015 40 commits
-
-
Brian Norris authored
[ Upstream commit f16db807 ] In some of the 'out_not_moved' error paths, lnum may be used uninitialized. Don't ignore the warning; let's fix it. This uninitialized variable doesn't have much visible effect in the end, since we just schedule the PEB for erasure, and its LEB number doesn't really matter (it just gets printed in debug messages). But let's get it straight anyway. Coverity CID #113449 Cc: stable <stable@vger.kernel.org> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Brian Norris authored
[ Upstream commit d74adbdb ] If aeb->len >= vol->reserved_pebs, we should not be writing aeb into the PEB->LEB mapping. Caught by Coverity, CID #711212. Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Brian Norris authored
[ Upstream commit 8eef7d70 ] We are completely discarding the earlier value of 'bitflips', which could reflect a bitflip found in ubi_io_read_vid_hdr(). Let's use the bitwise OR of header and data 'bitflip' statuses instead. Coverity CID #1226856 Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Thomas D authored
[ Upstream commit f82263c6 ] Since commit ee0778a3 ("tools/power: turbostat: make Makefile a bit more capable") turbostat's Makefile is using [...] BUILD_OUTPUT := $(PWD) [...] which obviously causes trouble when building "turbostat" with make -C /usr/src/linux/tools/power/x86/turbostat ARCH=x86 turbostat because GNU make does not update nor guarantee that $PWD is set. This patch changes the Makefile to use $CURDIR instead, which GNU make guarantees to set and update (i.e. when using "make -C ...") and also adds support for the O= option (see "make help" in your root of your kernel source tree for more details). Link: https://bugs.gentoo.org/show_bug.cgi?id=533918 Fixes: ee0778a3 ("tools/power: turbostat: make Makefile a bit more capable") Signed-off-by:
Thomas D. <whissi@whissi.de> Cc: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
[ Upstream commit c5e69192 ] When a event PADDING is hit (a deleted event that is still in the ring buffer), translate_data() sets the length of the padding and also updates the data pointer which is passed back to the caller. This is unneeded because the caller also updates the data pointer with the passed back length. translate_data() should not update the pointer, only set the length. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org # 3.12+ Link: http://lkml.kernel.org/r/20150324135923.461431960@goodmis.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Anton Blanchard authored
[ Upstream commit 9a5cbce4 ] We cap 32bit userspace backtraces to PERF_MAX_STACK_DEPTH (currently 127), but we forgot to do the same for 64bit backtraces. Cc: stable@vger.kernel.org Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Vinson Lee authored
[ Upstream commit e1e455f4 ] This patch fixes this build error with glibc < 2.6. CC util/cloexec.o cc1: warnings being treated as errors util/cloexec.c: In function ‘perf_flag_probe’: util/cloexec.c:24: error: implicit declaration of function ‘sched_getcpu’ util/cloexec.c:24: error: nested extern declaration of ‘sched_getcpu’ make: *** [util/cloexec.o] Error 1 Signed-off-by:
Vinson Lee <vlee@twitter.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: stable@vger.kernel.org # 3.18+ Link: http://lkml.kernel.org/r/1427137761-16119-1-git-send-email-vlee@twopensource.comSigned-off-by:
-
Vinson Lee authored
[ Upstream commit 4e31050f ] The token STT_GNU_IFUNC is not available with glibc 2.9 and older. Define this token if it is not already defined. This patch fixes this build errors with older versions of glibc. CC util/symbol-elf.o util/symbol-elf.c: In function ‘elf_sym__is_function’: util/symbol-elf.c:75: error: ‘STT_GNU_IFUNC’ undeclared (first use in this function) util/symbol-elf.c:75: error: (Each undeclared identifier is reported only once util/symbol-elf.c:75: error: for each function it appears in.) make: *** [util/symbol-elf.o] Error 1 Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit 8318e667 ] Invoking mount propagation from __detach_mounts is inefficient and wrong. It is inefficient because __detach_mounts already walks the list of mounts that where something needs to be done, and mount propagation walks some subset of those mounts again. It is actively wrong because if the dentry that is passed to __detach_mounts is not part of the path to a mount that mount should not be affected. change_mnt_propagation(p,MS_PRIVATE) modifies the mount propagation tree of a master mount so it's slaves are connected to another master if possible. Which means even removing a mount from the middle of a mount tree with __detach_mounts will not deprive any mount propagated mount events. Cc: stable@vger.kernel.org Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit e819f152 ] - Remove the unneeded declaration from pnode.h - Mark umount_tree static as it has no callers outside of namespace.c - Define an enumeration of umount_tree's flags. - Pass umount_tree's flags in by name This removes the magic numbers 0, 1 and 2 making the code a little clearer and makes it possible for there to be lazy unmounts that don't propagate. Which is what __detach_mounts actually wants for example. Cc: stable@vger.kernel.org Signed-off-by:
-
Lukas Czerner authored
[ Upstream commit e12fb972 ] Previously commit 14ece102 added a support for for syncing parent directory of newly created inodes to make sure that the inode is not lost after a power failure in no-journal mode. However this does not work in majority of cases, namely: - if the directory has inline data - if the directory is already indexed - if the directory already has at least one block and: - the new entry fits into it - or we've successfully converted it to indexed So in those cases we might lose the inode entirely even after fsync in the no-journal mode. This also includes ext2 default mode obviously. I've noticed this while running xfstest generic/321 and even though the test should fail (we need to run fsck after a crash in no-journal mode) I could not find a newly created entries even when if it was fsynced before. Fix this by adjusting the ext4_add_entry() successful exit paths to set the inode EXT4_STATE_NEWENTRY so that fsync has the chance to fsync the parent directory as well. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Frank Mayhar <fmayhar@google.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Marek Vasut authored
[ Upstream commit 9374e7d2 ] Add new ID for ASUS N10 WiFi dongle. Signed-off-by:
Marek Vasut <marex@denx.de> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Larry Finger authored
[ Upstream commit 2f92b314 ] USB ID 2001:330d is used for a D-Link DWA-131. Signed-off-by:
-
Christophe Ricard authored
[ Upstream commit d4a41d10 ] i2c_master_send may return many negative values different than -EREMOTEIO. In case an i2c transaction is NACK'ed, on raspberry pi B+ kernel 3.18, -EIO is generated instead. Cc: stable@vger.kernel.org Signed-off-by:
Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Oleg Nesterov authored
[ Upstream commit b72c1869 ] ptrace_resume() is called when the tracee is still __TASK_TRACED. We set tracee->exit_code and then wake_up_state() changes tracee->state. If the tracer's sub-thread does wait() in between, task_stopped_code(ptrace => T) wrongly looks like another report from tracee. This confuses debugger, and since wait_task_stopped() clears ->exit_code the tracee can miss a signal. Test-case: #include <stdio.h> #include <unistd.h> #include <sys/wait.h> #include <sys/ptrace.h> #include <pthread.h> #include <assert.h> int pid; void *waiter(void *arg) { int stat; for (;;) { assert(pid == wait(&stat)); assert(WIFSTOPPED(stat)); if (WSTOPSIG(stat) == SIGHUP) continue; assert(WSTOPSIG(stat) == SIGCONT); printf("ERR! extra/wrong report:%x\n", stat); } } int main(void) { pthread_t thread; pid = fork(); if (!pid) { assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0); for (;;) kill(getpid(), SIGHUP); } assert(pthread_create(&thread, NULL, waiter, NULL) == 0); for (;;) ptrace(PTRACE_CONT, pid, 0, SIGCONT); return 0; } Note for stable: the bug is very old, but without 9899d11f "ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL" the fix should use lock_task_sighand(child). Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Reported-by:
Pavel Labath <labath@google.com> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Michael Davidson authored
[ Upstream commit a87938b2 ] With CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE enabled, and a normal top-down address allocation strategy, load_elf_binary() will attempt to map a PIE binary into an address range immediately below mm->mmap_base. Unfortunately, load_elf_ binary() does not take account of the need to allocate sufficient space for the entire binary which means that, while the first PT_LOAD segment is mapped below mm->mmap_base, the subsequent PT_LOAD segment(s) end up being mapped above mm->mmap_base into the are that is supposed to be the "gap" between the stack and the binary. Since the size of the "gap" on x86_64 is only guaranteed to be 128MB this means that binaries with large data segments > 128MB can end up mapping part of their data segment over their stack resulting in corruption of the stack (and the data segment once the binary starts to run). Any PIE binary with a data segment > 128MB is vulnerable to this although address randomization means that the actual gap between the stack and the end of the binary is normally greater than 128MB. The larger the data segment of the binary the higher the probability of failure. Fix this by calculating the total size of the binary in the same way as load_elf_interp(). Signed-off-by:
Michael Davidson <md@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Kees Cook <keescook@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Ulrik De Bie authored
[ Upstream commit bd884149 ] On ASUS TP500LN and X750JN, the touchpad absolute mode is reset each time set_rate is done. In order to fix this, we will verify the firmware version, and if it matches the one in those laptops, the set_rate function is overloaded with a function elantech_set_rate_restore_reg_07 that performs the set_rate with the original function, followed by a restore of reg_07 (the register that sets the absolute mode on elantech v4 hardware). Also the ASUS TP500LN and X750JN firmware version, capabilities, and button constellation is added to elantech.c Cc: stable@vger.kernel.org Reported-and-tested-by:
George Moutsopoulos <gmoutso@yahoo.co.uk> Signed-off-by:
Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Kailang Yang authored
[ Upstream commit d32b6666 ] Switch default pcbeep path to Line in path. Signed-off-by:
Kailang Yang <kailang@realtek.com> Tested-by:
Hui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
David Henningsson authored
[ Upstream commit 7d1b6e29 ] The ALC256 does not have a mixer nid at 0x0b, and there's no loopback path (the output pins are directly connected to the DACs). This commit fixes an "num_steps = 0 for NID=0xb (ctl = Beep Playback Volume)" error (and as a result, problems with amixer/alsamixer). If there's pcbeep functionality, it certainly isn't controlled by setting an amp on 0x0b, so disable beep functionality (at least for now). Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1446517Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Jo-Philipp Wich authored
[ Upstream commit f2aa1110 ] The Lenovo Thinkpad T450 requires the ALC292_FIXUP_TPT440_DOCK as well in order to get working sound output on the docking stations headphone jack. Patch tested on a Thinkpad T450 (20BVCTO1WW) using kernel 4.0-rc7 in conjunction with a ThinkPad Ultradock. Signed-off-by:
Jo-Philipp Wich <jow@openwrt.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Michael Gernoth authored
[ Upstream commit 91bf0c2d ] The functions snd_emu10k1_proc_spdif_read and snd_emu1010_fpga_read acquire the emu_lock before accessing the FPGA. The function used to access the FPGA (snd_emu1010_fpga_read) also tries to take the emu_lock which causes a deadlock. Remove the outer locking in the proc-functions (guarding only the already safe fpga read) to prevent this deadlock. [removed superfluous flags variables too -- tiwai] Signed-off-by:
Michael Gernoth <michael@gernoth.net> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Yves-Alexis Perez authored
[ Upstream commit c0278669 ] This model uses the same dock port as the previous generation. Signed-off-by:
Yves-Alexis Perez <corsac@debian.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Boris Brezillon authored
[ Upstream commit 45912431 ] The at91sam9n12 and at91sam9x5 usb clocks do not propagate rate modification requests to their parents. This causes a bug when the PLLB is left uninitialized by the bootloader (PLL multiplier set to 0, or in other words, PLL rate = 0 Hz). Implement the determinate_rate method and propagate the change rate request to the parent clk. Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by:
Bo Shen <voice.shen@atmel.com> Tested-by:
Michael Turquette <mturquette@linaro.org> Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit bbc78c07 ] Make sure we're using the new macro, so our resume signaling will always pass certification. Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit 08debfb1 ] Make sure we're using the new macro, so our resume signaling will always pass certification. Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit ea16328f ] Make sure we're using the new macro, so our resume signaling will always pass certification. Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit b9e45188 ] Make sure we're using the new macro, so our resume signaling will always pass certification. Cc: <stable@vger.kernel.org> # v3.10+ Acked-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit 8c0ae657 ] Make sure we're using the new macro, so our resume signaling will always pass certification. Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit 7a606ac2 ] While this driver was already using a 50ms resume timeout, let's make sure everybody uses the same macro so it's easy to fix later should anything go wrong. It also gives a more "stable" expectation to Linux users. Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit 7e136bb7 ] Make sure we're using the new macro, so our resume signaling will always pass certification. Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit b8fb6f79 ] Make sure we're using the new macro, so our resume signaling will always pass certification. Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit 595227db ] Make sure we're using the new macro, so our resume signaling will always pass certification. Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit 84c0d178 ] Make sure we're using the new macro, so our resume signaling will always pass certification. Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit 309be239 ] Make sure we're using the new macro, so our resume signaling will always pass certification. Based on original work by Bin Liu <Bin Liu <b-liu@ti.com>> Cc: Bin Liu <b-liu@ti.com> Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit 62f0342d ] Every USB Host controller should use this new macro to define for how long resume signalling should be driven on the bus. Currently, almost every single USB controller is using a 20ms timeout for resume signalling. That's problematic for two reasons: a) sometimes that 20ms timer expires a little before 20ms, which makes us fail certification b) some (many) devices actually need more than 20ms resume signalling. Sure, in case of (b) we can state that the device is against the USB spec, but the fact is that we have no control over which device the certification lab will use. We also have no control over which host they will use. Most likely they'll be using a Windows PC which, again, we have no control over how that USB stack is written and how long resume signalling they are using. At the end of the day, we must make sure Linux passes electrical compliance when working as Host or as Device and currently we don't pass compliance as host because we're driving resume signallig for exactly 20ms and that confuses certification test setup resulting in Certification failure. Cc: <stable@vger.kernel.org> # v3.10+ Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
-
Axel Lin authored
[ Upstream commit 869aee0f ] The res parameter passed to devm_usb_phy_match() is the location where the pointer to the usb_phy is stored, hence it needs to be dereferenced before comparing to the match data in order to find the correct match. Fixes: 410219dc ("usb: otg: utils: devres: Add API's to associate a device with the phy") Signed-off-by:
Axel Lin <axel.lin@ingics.com> Cc: <stable@vger.kernel.org> # v3.6+ Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit e3c93e1a ] As per Mentor Graphics' documentation, we should always handle TX endpoints before RX endpoints. This patch fixes that error while also updating some hard-to-read comments which were scattered around musb_interrupt(). This patch should be backported as far back as possible since this error has been in the driver since it's conception. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Sebastian Hesselbarth authored
[ Upstream commit a74cd13b ] Fix Dove's register addresses of uart2 and uart3 nodes that seem to be broken since ages due to a copy-and-paste error. Cc: <stable@vger.kernel.org> # 3.7+ Signed-off-by:
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Charles Keepax authored
[ Upstream commit 4e330ae4 ] There are two PMICs on Cragganmore, currently one dynamically assign its IRQ base and the other uses a fixed base. It is possible for the statically assigned PMIC to fail if its IRQ is taken by the dynamically assigned one. Fix this by statically assigning both the IRQ bases. Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Kukjin Kim <kgene@kernel.org> Signed-off-by:
-
Gregory CLEMENT authored
[ Upstream commit 548ae94c ] On Armada 38x SoCs, under heavy I/O load, the system hangs when CPU Idle is enabled. Waiting for a solution to this issue, this patch disables the CPU Idle support for this SoC. As CPU Hot plug support also uses some of the CPU Idle functions it is also affected by the same issue. This patch disables it also for the Armada 38x SoCs. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: <stable@vger.kernel.org> # v3.17 + Signed-off-by:
-
