early_lookup_bdev is now only used during the early boot code as it
should, so mark it __init to not waste run time memory on it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-25-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

early_lookup_bdev is supposed to only be called from the early boot
code, but mdtblock_early_get_bdev is called as a general fallback when
lookup_bdev fails, which is problematic because early_lookup_bdev
bypasses all normal path based permission checking, and might cause
problems with certain container environments renaming devices.

Switch to only call early_lookup_bdev when block2mtd is built-in and the
system state in not running yet.

Note that this strictly speaking changes the kernel ABI as the PARTUUID=
and PARTLABEL= style syntax is now not available during a running
systems.  They never were intended for that, but this breaks things
we'll have to figure out a way to make them available again.  But if
avoidable in any way I'd rather avoid that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230531125535.676098-24-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Simplify add_device a bit by splitting out the cumbersome early boot logic
into a separate helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230531125535.676098-23-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

resume_store is a sysfs attribute written during normal kernel runtime,
and it should not use the early_lookup_bdev API that bypasses all normal
path based permission checking, and might cause problems with certain
container environments renaming devices.

Switch to lookup_bdev, which does a normal path lookup instead, and fall
back to trying to parse a numeric dev_t just like early_lookup_bdev did.

Note that this strictly speaking changes the kernel ABI as the PARTUUID=
and PARTLABEL= style syntax is now not available during a running
systems.  They never were intended for that, but this breaks things
we'll have to figure out a way to make them available again.  But if
avoidable in any way I'd rather avoid that.

Fixes: 421a5fa1 ("PM / hibernate: use name_to_dev_t to parse resume")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230531125535.676098-22-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

early_lookup_bdev is supposed to only be called from the early boot
code, but dm_get_device calls it as a general fallback when lookup_bdev
fails, which is problematic because early_lookup_bdev bypasses all normal
path based permission checking, and might cause problems with certain
container environments renaming devices.

Switch to only call early_lookup_bdev when dm is built-in and the system
state in not running yet.  This means it is still available when tables
are constructed by dm-init.c from the kernel command line, but not
otherwise.

Note that this strictly speaking changes the kernel ABI as the PARTUUID=
and PARTLABEL= style syntax is now not available during a running
systems.  They never were intended for that, but this breaks things
we'll have to figure out a way to make them available again.  But if
avoidable in any way I'd rather avoid that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20230531125535.676098-21-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Open code dm_get_dev_t in the only remaining caller, and propagate the
exact error code from lookup_bdev and early_lookup_bdev.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-20-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

dm_init_init is called from early boot code, and thus lookup_bdev
will never succeed.  Just open code that call to early_lookup_bdev
instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20230531125535.676098-19-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use the block_device acquired in dm_get_device for the check instead
of doing an extra lookup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20230531125535.676098-18-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

blk_lookup_devt is only used by code in early-lookup.c, so move it
there.

printk_all_partitions and it's helper bdevt_str are only used by the
early init code in init/do_mounts.c, so they should go there as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-17-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Create a new block/early-lookup.c to keep the early block device lookup
code instead of having this code sit with the early mount code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-16-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Instead of only clearing root_wait in devt_from_partuuid when the UUID
format was invalid, do that in parse_root_device for all strings that
failed to parse.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-15-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

name_to_dev_t has a very misleading name, that doesn't make clear
it should only be used by the early init code, and also has a bad
calling convention that doesn't allow returning different kinds of
errors.  Rename it to early_lookup_bdev to make the use case clear,
and return an errno, where -EINVAL means the string could not be
parsed, and -ENODEV means it the string was valid, but there was
no device found for it.

Also stub out the whole call for !CONFIG_BLOCK as all the non-block
root cases are always covered in the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-14-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

The nfs/cifs/ram special case only needs to be parsed once, and only in
the boot code.  Move them out of name_to_dev_t and into
prepare_namespace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-13-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

The root_wait logic is a bit obsfucated right now.  Expand it and move it
into a helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-12-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Assign a Root_Generic magic value for UBI/MTD root and handle the root
mounting in mount_root like all other root types.  Besides making the
code more clear this also means that UBI/MTD root can be used together
with an initrd (not that anyone should care).

Also factor parsing of the root name into a helper now that it can
be easily done and will get more complicated with subsequent patches.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-11-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Remove the code that drops the /dev/ prefix from root_device_name, which
is only used for error messages when mounting the root device fails.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-10-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Instead of declaring root_device_name as a global variable pass it as an
argument to the functions using it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-9-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Provide stubs for all the lower level mount helpers, and just switch
on ROOT_DEV in the main function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-8-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

mount_block_root is also used to mount non-block file systems, so give
it a better name.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-7-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Remove all unused defines, and just use the expanded versions for
the SCSI disk majors.

I've decided to keep Root_RAM0 even if it could be expanded as there
is a lot of special casing for it in the init code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-6-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

software_resume can be called either from an init call in the boot code,
or from sysfs once the system has finished booting, and the two
invocation methods this can't race with each other.

For the latter case we did just parse the suspend device manually, while
the former might not have one.  Split software_resume so that the search
only happens for the boot case, which also means the special lockdep
nesting annotation can go away as the system transition mutex can be
taken a little later and doesn't have the sysfs locking nest inside it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230531125535.676098-5-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Passing call dependent variable in global variables is a huge
antipattern.  Fix it up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230531125535.676098-4-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Split the logic to find the resume device out software_resume and into
a separate helper to start unwindig the convoluted goto logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230531125535.676098-3-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

bool is the most sensible return value for a yes/no return.  Also
add __init as this funtion is only called from the early boot code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230531125535.676098-2-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Implement a set of holder_ops that shut down the file system when the
block device used as log device is removed undeneath the file system.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-17-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Wire up the shutdown method to shut down the file system when the
underlying block device is marked dead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-16-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Split ext4_shutdown into a low-level helper that will be reused for
implementing the shutdown super operation and a wrapper for the ioctl
handling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-15-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Implement a set of holder_ops that shut down the file system when the
block device used as log or RT device is removed undeneath the file
system.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-14-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Wire up the shutdown method to shut down the file system when the
underlying block device is marked dead.  Add a new message to
clearly distinguish this shutdown reason from other shutdowns.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-13-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Add a new ->shutdown super operation that can be used to tell the file
system to shut down, and call it from newly created holder ops when the
block device under a file system shuts down.

This only covers the main block device for "simple" file systems using
get_tree_bdev / mount_bdev.  File systems their own get_tree method
or opening additional devices will need to set up their own
blk_holder_ops.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-12-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Add a mark_dead method to blk_holder_ops that is called from blk_mark_disk_dead
to notify the holder that the block device it is using has been marked dead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-11-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Add a new blk_holder_ops structure, which is passed to blkdev_get_by_* and
installed in the block_device for exclusive claims.  It will be used to
allow the block layer to call back into the user of the block device for
thing like notification of a removed device or a device resize.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-10-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

There is only a single caller left, so fold the loop into that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-9-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Delay dropping the block_devices for partitions in del_gendisk until
after the call to blk_mark_disk_dead, so that we can implementat
notification of removed devices in blk_mark_disk_dead.

This requires splitting a lower-level drop_partition helper out of
delete_partition and using that from del_gendisk, while having a
common loop for the whole device and partitions that calls
remove_inode_hash, fsync_bdev and __invalidate_device before the
call to blk_mark_disk_dead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-8-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Move the call to remove_inode_hash to the beginning of delete_partition,
as we want to prevent opening a block_device that is about to be removed
ASAP.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-7-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Check if GD_DEAD is already set in blk_mark_disk_dead, and don't
duplicate the work already done.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-6-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

blk_mark_disk_dead does very similar work a a section of del_gendisk:

 - set the GD_DEAD flag
 - set the capacity to zero
 - start a queue drain

but del_gendisk also sets QUEUE_FLAG_DYING on the queue if it is owned by
the disk, sets the capacity to zero before starting the drain, and both
with sending a uevent and kernel message for this fake capacity change.

Move the exact logic from the more heavily used del_gendisk into
blk_mark_disk_dead and then call blk_mark_disk_dead from del_gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-5-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

There is no reason for this lock to spin, and being able to sleep under
it will come in handy soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-4-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

The long if/else chain obsfucates the actual logic.  Tidy it up to be
more structured.  Also drop the whole argument, as it can be trivially
derived from bdev using bdev_whole, and having the bdev_whole in the
function makes it easier to follow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-3-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Move all the logic to release an exclusive claim into a helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-2-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>