- 04 Mar, 2010 29 commits
-
-
Christoph Hellwig authored
Currently clear_inode calls vfs_dq_drop directly. This means we tie the quota code into the VFS. Get rid of that and make the filesystem responsible for the drop inside the ->clear_inode superblock operation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
-
Christoph Hellwig authored
Get rid of the transfer dquot operation - it is now always called from the filesystem and if a filesystem really needs it's own (which none currently does) it can just call into it's own routine directly. Rename the now static low-level dquot_transfer helper to __dquot_transfer and vfs_dq_transfer to dquot_transfer to have a consistent namespace, and make the new dquot_transfer return a normal negative errno value which all callers expect. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
-
Christoph Hellwig authored
Currently notify_change calls vfs_dq_transfer directly. This means we tie the quota code into the VFS. Get rid of that and make the filesystem responsible for the transfer. Most filesystems already do this, only ufs and udf need the code added, and for jfs it needs to be enabled unconditionally instead of only when ACLs are enabled. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
-
Christoph Hellwig authored
Get rid of the alloc_inode and free_inode dquot operations - they are always called from the filesystem and if a filesystem really needs their own (which none currently does) it can just call into it's own routine directly. Also get rid of the vfs_dq_alloc/vfs_dq_free wrappers and always call the lowlevel dquot_alloc_inode / dqout_free_inode routines directly, which now lose the number argument which is always 1. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
-
Christoph Hellwig authored
Get rid of the alloc_space, free_space, reserve_space, claim_space and release_rsv dquot operations - they are always called from the filesystem and if a filesystem really needs their own (which none currently does) it can just call into it's own routine directly. Move shared logic into the common __dquot_alloc_space, dquot_claim_space_nodirty and __dquot_free_space low-level methods, and rationalize the wrappers around it to move as much as possible code into the common block for CONFIG_QUOTA vs not. Also rename all these helpers to be named dquot_* instead of vfs_dq_*. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
-
Dmitry Monakhov authored
- There is theoretical possibility to perform writepage on RO superblock. Add explicit check for what case. - Page must being locked before writepage. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
We have to truncate blocks allocated to file during direct IO when we fail to update i_size properly. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Sometimes invalidate_bdev() can fail to invalidate a part of block device cache because of dirty data. If the filesystem has blocksize smaller than page size, this can happen even for pages containing quota files and thus kernel would operate on stale data. Fix the issue by syncing the filesystem before invalidating the cache. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
-
Dmitry Monakhov authored
Current quota transfer interface support only uid/gid. This patch extend interface in order to support various quotas types The goal is accomplished without changes in most frequently used vfs_dq_transfer() func. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jan Kara <jack@suse.cz>
-
Dmitry Monakhov authored
- remove hardcoded USRQUOTA/GRPQUOTA flags - convert int to bool for appropriate functions Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Delay discarding buffers in journal_unmap_buffer until we know that "add to orphan" operation has definitely been committed, otherwise the log space of committing transation may be freed and reused before truncate get committed, updates may get lost if crash happens. This patch is a backport of JBD2 fix by dingdinghua <dingdinghua@nrchpc.ac.cn>. Signed-off-by: Jan Kara <jack@suse.cz>
-
Dmitry Monakhov authored
We always assume what dquot update result in changes in one data block But ext3_quota_write() function may handle cross block boundary writes In fact if this ever happen it will result in incorrect journal credits reservation. And later bug_on triggering. As soon this never happen the boundary cross loop is NOOP. In order to make things straight let's remove this loop and assert cross boundary condition. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jan Kara <jack@suse.cz>
-
Christoph Hellwig authored
We already do these checks in the generic code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
-
Christoph Hellwig authored
Instead of adding ifdefs just split it into a new file. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
-
Christoph Hellwig authored
Instead of adding ifdefs just split it into a new file. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
-
Christoph Hellwig authored
Checking the "VFS" quota enabled and dirty bits from generic code means this code will never get called for other implementations, e.g. XFS and GFS2. Grabbing the reference on the superblock really isn't much overhead for a global Q_SYNC call, so just drop this optimization. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
-
Christoph Hellwig authored
Currenly sync_quota_sb does a lot of sync and truncate action that only applies to "VFS" style quotas and is actively harmful for the sync performance in XFS. Move it into vfs_quota_sync and add a wait parameter to ->quota_sync to tell if we need it or not. My audit of the GFS2 code says it's also not needed given the way GFS2 implements quotas, but I'd be happy if this can get a detailed review. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
-
Christoph Hellwig authored
Currently Q_XQUOTASYNC calls into the quota_sync method, but XFS does something entirely different in it than the rest of the filesystems. xfs_quota which calls Q_XQUOTASYNC expects an asynchronous data writeout to flush delayed allocations, while the "VFS" quota support wants to flush changes to the quota file. So make Q_XQUOTASYNC call into the writeback code directly and make the quota_sync method optional as XFS doesn't need in the sense expected by the rest of the quota code. GFS2 was using limited XFS-style quota and has a quota_sync method fitting neither the style used by vfs_quota_sync nor xfs_fs_quota_sync. I left it in for now as per discussion with Steve it expects to be called from the sync path this way. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
-
Christoph Hellwig authored
Stop having complicated different routines for checking permissions for XQM vs "VFS" quotas. Instead do the checks for having sb->s_qcop and a valid type directly in do_quotactl, and munge the *quotactl_valid functions into a check_quotactl_permission helper that only checks for permissions. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
-
Christoph Hellwig authored
The Q_SYNC command can be called without the path to a device, in which case it iterates over all superblocks. Special case this variant directly in sys_quotactl so that the other code always gets a superblock and doesn't need to deal with this case. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
-
Christoph Hellwig authored
Move the checks for sb->s_qcop->foo next to the actual calls for them, same for sb_has_quota_active checks where applicable. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
-
Christoph Hellwig authored
Split out a helper for each non-trivial command from do_quotactl. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
If a delayed-allocation write happens before quota is enabled, the kernel spits out a warning: WARNING: at fs/quota/dquot.c:988 dquot_claim_space+0x77/0x112() because the fact that user has some delayed allocation is not recorded in quota structure. Make dquot_initialize() update amount of reserved space for user if it sees inode has some space reserved. Also make sure that reserved quota space does not go negative and we warn about the filesystem bug just once. Signed-off-by: Jan Kara <jack@suse.cz>
-
Dmitry Monakhov authored
Since we implemented generic reserved space management interface, then it is possible to account reserved space even when quota is not active (similar to i_blocks/i_bytes). Without this patch following testcase result in massive comlain from WARN_ON in dquot_claim_space() TEST_CASE: mount /dev/sdb /mnt -oquota dd if=/dev/zero of=/mnt/test bs=1M count=1 quotaon /mnt # fs_reserved_spave == 1Mb # quota_reserved_space == 0, because quota was disabled dd if=/dev/zero of=/mnt/test seek=1 bs=1M count=1 # fs_reserved_spave == 2Mb # quota_reserved_space == 1Mb sync # ->dquot_claim_space() -> WARN_ON Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jan Kara <jack@suse.cz>
-
Christoph Egger authored
CONFIG_BUFFER_DEBUG seems to have been removed from the documentation somewhere around 2.4.15 and seemingly hasn't been available even longer. It is, however, still referenced at one place from the jbd code (one is a copy of the other header). Time to clean it up Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Signed-off-by: Jan Kara <jack@suse.cz>
-
Dmitry Monakhov authored
The patch is aimed to reorganize and simplify quota code a bit. Quota code is itself complex enouth, but we can make it more readable in some places: - Move quota option parsing to separate functions. - Simplify old-quota and journaled-quota mix check. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jan Kara <jack@suse.cz>
-
Dmitry Monakhov authored
Replace intermediate EXT3_MOUNT_XXX flags manipulation to corresponding macro. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
At several places we modify EXT3_I(inode)->i_state without holding i_mutex (ext3_release_file, ext3_bmap, ext3_journalled_writepage, ext3_do_update_inode, ...). These modifications are racy and we can lose updates to i_state. So convert handling of i_state to use bitops which are atomic. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Cleanup handling of S_NOQUOTA inode flag and document it a bit. The flag does not have to be set under dqptr_sem. Only functions modifying inode's dquot pointers have to check the flag under dqptr_sem before going forward with the modification. This way we are sure that we cannot add new dquot pointers to the inode which is just becoming a quota file. The good thing about this cleanup is that there are no more places in quota code which enforce i_mutex vs. dqptr_sem lock ordering (in particular that dqptr_sem -> i_mutex of quota file). This should silence some (false) lockdep warnings with ext4 + quota and generally make life of some filesystems easier. Signed-off-by: Jan Kara <jack@suse.cz>
-
- 02 Mar, 2010 11 commits
-
-
git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds authored
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: (49 commits) OMAP: DSS2: Taal: Fix TE when resuming OMAP: DSS2: Taal: Fix ESD check OMAP: DSS2: OMAPFB: Constify some function parameters OMAP: DSS2: OMAPFB: install omapfb.h OMAP: DSS2: DSI: add error prints OMAP: DSS2: TPO-TD03MTEA1: fix function names OMAP: DSS2: DSI: add dsi_vc_dcs_read_2() helper OMAP: DSS2: OMAPFB: Remove FB_OMAP2_FORCE_AUTO_UPDATE OMAP: DSS2: DSI: remove external TE support OMAP: DSS2: move timing functions OMAP: DSS2: move set/get_wss() OMAP: DSS2: move enable/disable/suspend/resume OMAP: DSS2: move update() and sync() OMAP: DSS2: move set/get_update_mode() OMAP: DSS2: move enable/get_te() OMAP: DSS2: move get_recommended_bpp() OMAP: DSS2: move get_resolution() OMAP: DSS2: move enable/disable_channel to overlay manager OMAP: DSS2: move wait_vsync() OMAP: DSS2: move get/set_rotate() ...
-
Linus Torvalds authored
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (214 commits) omap2: Initialize Menelaus and MMC for N8X0 AM3517 EVM: correct typo - tca6416 mispelt as tca6516 AM3517 EVM: Enable I2C support AM35x: Enable OMAP_MUX in defconfig AM35x: Add missing GPIO mux config for EHCI port Zoom3: Defconfig update omap: i2c: Fix muxing for command line enabled bus OMAP4: clock: Remove clock hacks from timer-gp.c OMAP4: clock: Add dummy clock nodes for interface clocks OMAP4: clock: Rename leaf clock nodes to end with a _ick or _fck OMAP2+ clock: revise omap2_clk_{disable,enable}() OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code OMAP clockdomain: if no autodeps exist, don't try to add or remove them OMAP hwmod: add hwmod class support OMAP hwmod: convert header files with static allocations into C files OMAP hwmod: convert hwmod to use hardware clock names rather than clkdev dev+con OMAP clock: add omap_clk_get_by_name() for use by OMAP hwmod core code OMAP3: clock: add capability to change rate of dpll4_m5_ck_3630 OMAP4 clock: drop the ALWAYS_ENABLED clock flag OMAP clock: drop RATE_FIXED clock flag ...
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: Revert "blkdev: fix merge_bvec_fn return value checks"
-
Jens Axboe authored
This reverts commit 9f7cdbc3. It's causing oopses om dm setups, so revert it until we investigate. Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: sparc: Support show_unhandled_signals. sparc: use __ratelimit sunxvr500: Additional PCI id for sunxvr500 driver sparc: use asm-generic/scatterlist.h sparc64: If 'slot-names' property exist, create sysfs PCI slot information. sparc: remove trailing space in messages sparc: remove redundant return statements
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1341 commits) virtio_net: remove forgotten assignment be2net: fix tx completion polling sis190: fix cable detect via link status poll net: fix protocol sk_buff field bridge: Fix build error when IGMP_SNOOPING is not enabled bnx2x: Tx barriers and locks scm: Only support SCM_RIGHTS on unix domain sockets. vhost-net: restart tx poll on sk_sndbuf full vhost: fix get_user_pages_fast error handling vhost: initialize log eventfd context pointer vhost: logging thinko fix wireless: convert to use netdev_for_each_mc_addr ethtool: do not set some flags, if others failed ipoib: returned back addrlen check for mc addresses netlink: Adding inode field to /proc/net/netlink axnet_cs: add new id bridge: Make IGMP snooping depend upon BRIDGE. bridge: Add multicast count/interval sysfs entries bridge: Add hash elasticity/max sysfs entries bridge: Add multicast_snooping sysfs toggle ... Trivial conflicts in Documentation/feature-removal-schedule.txt
-
Tomi Valkeinen authored
TE was not initialized properly on power on, which broke TE when resuming from suspend. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-
Jiri Pirko authored
This is no longer needed. I missed to remove this in 567ec874 ("net: convert multiple drivers to use netdev_for_each_mc_addr, part6") Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
In tx/mcc polling, napi_complete() is being incorrectly called before reaping tx completions. This can cause tx compl processing to be scheduled on another cpu concurrently which can result in a panic. This if fixed by calling napi complete() after tx/mcc compl processing but before re-enabling interrupts (via a cq notify). Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herton Ronaldo Krzesinski authored
Some sis190 devices don't report LinkChange, so do polling for link status. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11926Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Commit e992cd9b (kmemcheck: make bitfield annotations truly no-ops when disabled) allows us to revert a workaround we did in the past to not add holes in sk_buff structure. This patch partially reverts commit 14d18a81 (net: fix kmemcheck annotations) so that sparse doesnt complain: include/linux/skbuff.h:357:41: error: invalid bitfield specifier for type restricted __be16. Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-