- 16 Dec, 2008 38 commits
-
-
Andy Fleming authored
gfar_halt does everything we want to do there, including disabling TX/RX. It also doesn't unnecessarily enable DMA if it's already stopped. Signed-off-by:
Andy Fleming <afleming@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sakari Ailus authored
The big rx/tx buffer support is broken and unlikely to be very useful as such. Remove it. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
David S. Miller authored
Conflicts: drivers/net/enc28j60.c
-
Sakari Ailus authored
Fix pci unmapping problem introduced by commit id 8953f128 "tlan: Fix small (< 64 bytes) datagram transmissions". Signed-off-by:
-
Yang Hongyang authored
1.When no interface is specified in an IPV6_PKTINFO ancillary data item, the interface specified in an IPV6_PKTINFO sticky optionis is used. RFC3542: 6.7. Summary of Outgoing Interface Selection This document and [RFC-3493] specify various methods that affect the selection of the packet's outgoing interface. This subsection summarizes the ordering among those in order to ensure deterministic behavior. For a given outgoing packet on a given socket, the outgoing interface is determined in the following order: 1. if an interface is specified in an IPV6_PKTINFO ancillary data item, the interface is used. 2. otherwise, if an interface is specified in an IPV6_PKTINFO sticky option, the interface is used. Signed-off-by:Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by:
-
Yang Hongyang authored
When get receiving interface index while no message is received, the the value seted with setsockopt() should be returned. RFC 3542: Issuing getsockopt() for the above options will return the sticky option value i.e., the value set with setsockopt(). If no sticky option value has been set getsockopt() will return the following values: - For the IPV6_PKTINFO option, it will return an in6_pktinfo structure with ipi6_addr being in6addr_any and ipi6_ifindex being zero. Signed-off-by: -
Yang Hongyang authored
There are three reasons for me to add this support: 1.When no interface is specified in an IPV6_PKTINFO ancillary data item, the interface specified in an IPV6_PKTINFO sticky optionis is used. RFC3542: 6.7. Summary of Outgoing Interface Selection This document and [RFC-3493] specify various methods that affect the selection of the packet's outgoing interface. This subsection summarizes the ordering among those in order to ensure deterministic behavior. For a given outgoing packet on a given socket, the outgoing interface is determined in the following order: 1. if an interface is specified in an IPV6_PKTINFO ancillary data item, the interface is used. 2. otherwise, if an interface is specified in an IPV6_PKTINFO sticky option, the interface is used. 2.When no IPV6_PKTINFO ancillary data is received,getsockopt() should return the sticky option value which set with setsockopt(). RFC 3542: Issuing getsockopt() for the above options will return the sticky option value i.e., the value set with setsockopt(). If no sticky option value has been set getsockopt() will return the following values: 3.Make the setsockopt implementation POSIX compliant. Signed-off-by: -
Steve Glendinning authored
These 4 drivers have identical full duplex flow control resolution functions. This patch changes them all to use one common function. The function in question decides whether a device should enable TX and RX flow control in a standard way (IEEE 802.3-2005 table 28B-3), so this should also be useful for other drivers. Signed-off-by:
Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by:
-
Steve Glendinning authored
flags used within drivers for indicating tx and rx flow control are defined in 4 drivers (and probably more), move these constants to mii.h. The 3 SMSC drivers use the same constants (FLOW_CTRL_TX), but TG3 uses TG3_FLOW_CTRL_TX, so this patch also renames the constants within TG3. Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Divy Le Ray authored
The NIC driver can work with mutliple versions of the FW. Let the driver load when the embedded FW does not match, and the FW update mechanism failed. The iWARP module will make its own loading decision. Signed-off-by:
Divy Le Ray <divy@chelsio.com> Signed-off-by:
-
Baruch Siach authored
The enc28j60 driver reads incoming packets in the process (workqueue) context, not in a tasklet or the interrupt context. Thus, we should use netif_rx_ni() to deliver those packets to the networking layer, instead of netif_rx(). This way incoming packets don't wait in the incoming queue for the next IRQ to be serviced. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
Sakari Ailus authored
The TLAN chip does not support tranmissions smaller than 64 bytes. Smaller transfers need to be padded up to that size. This was broken by commit id 41873e9a ("tlan: get rid of padding buffer"). <URL:http://bugzilla.kernel.org/show_bug.cgi?id=11754> Signed-off-by:
-
Oliver Hartkopp authored
Signed-off-by:
Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by:
-
James Chapman authored
The pppol2tp driver has had broken UDP checksum code for a long time. This patch fixes it. If UDP checksums are enabled in the tunnel's UDP socket, the L2TP driver now properly validates the checksum on receive and fills in the checksum on transmit. If the network device has hardware checksum support and is enabled, it is used instead of generating/checking the checksum in software. Signed-off-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
Pablo Neira Ayuso authored
This patch fixes an inconsistency in nfnetlink_conntrack.h that I introduced myself. The problem is that CTA_NAT_SEQ_UNSPEC is missing from enum ctattr_natseq. This inconsistency may lead to problems in the message parsing in userspace (if the message contains the CTA_NAT_SEQ_* attributes, of course). This patch breaks backward compatibility, however, the only known client of this code is libnetfilter_conntrack which indeed crashes because it assumes the existence of CTA_NAT_SEQ_UNSPEC to do the parsing. The CTA_NAT_SEQ_* attributes were introduced in 2.6.25. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Rémi Denis-Courmont authored
Signed-off-by:
Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by:
-
Hannes Eder authored
Fix this sparse warnings by making the functions static: drivers/isdn/hardware/eicon/di.c:356:6: warning: symbol 'isdn_rc' was not declared. Should it be static? drivers/isdn/hardware/eicon/di.c:558:6: warning: symbol 'isdn_ind' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:595:6: warning: symbol 'api_parse' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:634:6: warning: symbol 'api_save_msg' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:666:6: warning: symbol 'api_load_msg' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:3417:6: warning: symbol 'manufacturer_req' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:3745:6: warning: symbol 'manufacturer_res' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:4077:6: warning: symbol 'control_rc' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:4743:6: warning: symbol 'data_rc' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:4779:6: warning: symbol 'data_ack' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:4805:6: warning: symbol 'sig_ind' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:6173:6: warning: symbol 'SendInfo' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:6349:6: warning: symbol 'SendMultiIE' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:6468:6: warning: symbol 'nl_ind' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:7250:6: warning: symbol 'get_plci' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:7409:6: warning: symbol 'add_d' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:7427:6: warning: symbol 'add_ai' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:7448:6: warning: symbol 'add_b1' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:7912:6: warning: symbol 'add_b23' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:8709:6: warning: symbol 'nl_req_ncci' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:8731:6: warning: symbol 'send_req' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:8866:6: warning: symbol 'listen_check' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:8909:6: warning: symbol 'IndParse' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:8994:6: warning: symbol 'ie_compare' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:9003:6: warning: symbol 'find_cip' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:9071:6: warning: symbol 'SetVoiceChannel' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:9089:6: warning: symbol 'VoiceChannelOff' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:9102:6: warning: symbol 'AdvCodecSupport' was not declared. Should it be static? drivers/isdn/hardware/eicon/message.c:9198:6: warning: symbol 'CodecIdCheck' was not declared. Should it be static? Signed-off-by:
Hannes Eder <hannes@hanneseder.net> Signed-off-by:
-
Ilpo Järvinen authored
Also removes redundant skb->len < x check which can't be true once pskb_may_pull(skb, x) succeeded. $ diff-funcs pim_rcv ipmr.c ipmr.c pim_rcv_v1 --- ipmr.c:pim_rcv() +++ ipmr.c:pim_rcv_v1() @@ -1,22 +1,27 @@ -static int pim_rcv(struct sk_buff * skb) +int pim_rcv_v1(struct sk_buff * skb) { - struct pimreghdr *pim; + struct igmphdr *pim; struct iphdr *encap; struct net_device *reg_dev = NULL; if (!pskb_may_pull(skb, sizeof(*pim) + sizeof(*encap))) goto drop; - pim = (struct pimreghdr *)skb_transport_header(skb); - if (pim->type != ((PIM_VERSION<<4)|(PIM_REGISTER)) || - (pim->flags&PIM_NULL_REGISTER) || - (ip_compute_csum((void *)pim, sizeof(*pim)) != 0 && - csum_fold(skb_checksum(skb, 0, skb->len, 0)))) + pim = igmp_hdr(skb); + + if (!mroute_do_pim || + skb->len < sizeof(*pim) + sizeof(*encap) || + pim->group != PIM_V1_VERSION || pim->code != PIM_V1_REGISTER) goto drop; - /* check if the inner packet is destined to mcast group */ encap = (struct iphdr *)(skb_transport_header(skb) + - sizeof(struct pimreghdr)); + sizeof(struct igmphdr)); + /* + Check that: + a. packet is really destinted to a multicast group + b. packet is not a NULL-REGISTER + c. packet is not truncated + */ if (!ipv4_is_multicast(encap->daddr) || encap->tot_len == 0 || ntohs(encap->tot_len) + sizeof(*pim) > skb->len) @@ -40,9 +45,9 @@ skb->ip_summed = 0; skb->pkt_type = PACKET_HOST; dst_release(skb->dst); + skb->dst = NULL; reg_dev->stats.rx_bytes += skb->len; reg_dev->stats.rx_packets++; - skb->dst = NULL; nf_reset(skb); netif_rx(skb); dev_put(reg_dev); $ codiff net/ipv4/ipmr.o.old net/ipv4/ipmr.o.new net/ipv4/ipmr.c: pim_rcv_v1 | -283 pim_rcv | -284 2 functions changed, 567 bytes removed net/ipv4/ipmr.c: __pim_rcv | +307 1 function changed, 307 bytes added net/ipv4/ipmr.o.new: 3 functions changed, 307 bytes added, 567 bytes removed, diff: -260 (Tested on x86_64). It seems that pimlen arg could be left out as well and eq-sizedness of structs trapped with BUILD_BUG_ON but I don't think that's more than a cosmetic flaw since there aren't that many args anyway. Compile tested. Signed-off-by:Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
-
Ilpo Järvinen authored
Signed-off-by:
-
Divy Le Ray authored
Implement NIC Tx multiqueue. Bump up driver version. Signed-off-by:
-
Herbert Xu authored
This patch adds GRO support to e1000e by making it invoke napi_gro_receive instead of netif_receive_skb. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
This patch adds the ethtool ops to enable and disable GRO. It also makes GRO depend on RX checksum offload much the same as how TSO depends on SG support. Signed-off-by:
-
Herbert Xu authored
This patch adds the TCP-specific portion of GRO. The criterion for merging is extremely strict (the TCP header must match exactly apart from the checksum) so as to allow refragmentation. Otherwise this is pretty much identical to LRO, except that we support the merging of ECN packets. Signed-off-by:
-
Herbert Xu authored
This patch adds the helper skb_gro_receive to merge packets for GRO. The current method is to allocate a new header skb and then chain the original packets to its frag_list. This is done to make it easier to integrate into the existing GSO framework. In future as GSO is moved into the drivers, we can undo this and simply chain the original packets together. Signed-off-by:
-
Herbert Xu authored
This patch adds GRO support for IPv4. The criteria for merging is more stringent than LRO, in particular, we require all fields in the IP header to be identical except for the length, ID and checksum. In addition, the ID must form an arithmetic sequence with a difference of one. The ID requirement might seem overly strict, however, most hardware TSO solutions already obey this rule. Linux itself also obeys this whether GSO is in use or not. In future we could relax this rule by storing the IDs (or rather making sure that we don't drop them when pulling the aggregate skb's tail). Signed-off-by:
-
Herbert Xu authored
This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by:
-
Herbert Xu authored
This patch allows GSO to handle frag_list in a limited way for the purposes of allowing packets merged by GRO to be refragmented on output. Most hardware won't (and aren't expected to) support handling GRO frag_list packets directly. Therefore we will perform GSO in software for those cases. However, for drivers that can support it (such as virtual NICs) we may not have to segment the packets at all. Whether the added overhead of GRO/GSO is worthwhile for bridges and routers when weighed against the benefit of potentially increasing the MTU within the host is still an open question. However, for the case of host nodes this is undoubtedly a win. Signed-off-by:
-
Herbert Xu authored
This patch adds limited support for handling frag_list packets in skb_segment. The intention is to support GRO (Generic Receive Offload) packets which will be constructed by chaining normal packets using frag_list. As such we require all frag_list members terminate on exact MSS boundaries. This is checked using BUG_ON. As there should only be one producer in the kernel of such packets, namely GRO, this requirement should not be difficult to maintain. Signed-off-by:
-
David S. Miller authored
Conflicts: drivers/net/e1000e/ich8lan.c
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5348/1: fix documentation wrt location of the alignment trap interface [ARM] Ensure linux/hardirqs.h is included where required [ARM] fix kernel-doc syntax [ARM] arch/arm/common/sa1111.c: Correct error handling code [ARM] 5341/2: there is no copy_page on nommu ARM
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: Phonet: keep TX queue disabled when the device is off SCHED: netem: Correct documentation comment in code. netfilter: update rwlock initialization for nat_table netlabel: Compiler warning and NULL pointer dereference fix e1000e: fix double release of mutex IA64: HP_SIMETH needs to depend upon NET netpoll: fix race on poll_list resulting in garbage entry ipv6: silence log messages for locally generated multicast sungem: improve ethtool output with internal pcs and serdes tcp: tcp_vegas cong avoid fix sungem: Make PCS PHY support partially work again.
-
Rusty Russell authored
Otherwise those using it in transition patches (eg. kvm) can't compile with CONFIG_SMP=n: arch/x86/kvm/../../../virt/kvm/kvm_main.c: In function 'make_all_cpus_request': arch/x86/kvm/../../../virt/kvm/kvm_main.c:380: error: implicit declaration of function 'smp_call_function_many' Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Paul Menage authored
When a cgroup is removed, it's unlinked from its parent's children list, but not actually freed until the last dentry on it is released (at which point cgrp->root->number_of_cgroups is decremented). Currently rebind_subsystems checks for the top cgroup's child list being empty in order to rebind subsystems into or out of a hierarchy - this can result in the set of subsystems bound to a hierarchy being removed-but-not-freed cgroup. The simplest fix for this is to forbid remounts that change the set of subsystems on a hierarchy that has removed-but-not-freed cgroups. This bug can be reproduced via: mkdir /mnt/cg mount -t cgroup -o ns,freezer cgroup /mnt/cg mkdir /mnt/cg/foo sleep 1h < /mnt/cg/foo & rmdir /mnt/cg/foo mount -t cgroup -o remount,ns,devices,freezer cgroup /mnt/cg kill $! Though the above will cause oops in -mm only but not mainline, but the bug can cause memory leak in mainline (and even oops) Signed-off-by:
Paul Menage <menage@google.com> Reviewed-by:
Li Zefan <lizf@cn.fujitsu.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Frederik Deweerdt authored
Part of the rfkill initialization was done whenever BT was on or not. The following patch checks for BT presence before registering the rfkill to the input layer. Some minor cleanups (> 80 char lines) were also added in the process. On Tue, Oct 28, 2008 at 10:10:37PM +0300, Andrey Borzenkov wrote: [...] > [ 66.633036] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19 > [ 66.633054] toshiba_acpi: HCI method: \_SB_.VALD.GHCI > [ 66.637764] input: Toshiba RFKill Switch as /devices/virtual/input/input3 [...] > [ 113.920753] ------------[ cut here ]------------ > [ 113.920828] kernel BUG at /home/bor/src/linux-git/net/rfkill/rfkill.c:347! > [ 113.920845] invalid opcode: 0000 [#1] > [ 113.920877] last sysfs file: /sys/devices/pci0000:00/0000:00:04.0/host0/target0:0:0/0:0:0:0/block/sda/size > [ 113.920900] Dumping ftrace buffer: > [ 113.920919] (ftrace buffer empty) > [ 113.920933] Modules linked in: af_packet irnet ppp_generic slhc ircomm_tty ircomm binfmt_misc loop dm_mirror dm_region_hash dm_log dm_round_robin dm_multipath dm_mod alim15x3 ide_core nvram toshiba cryptomgr aead crypto_blkcipher michael_mic crypto_algapi orinoco_cs orinoco hermes_dld hermes pcmcia firmware_class snd_ali5451 snd_ac97_codec ac97_bus snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device smsc_ircc2 snd_pcm_oss snd_pcm rtc_cmos irda snd_timer snd_mixer_oss rtc_core snd crc_ccitt yenta_socket rtc_lib rsrc_nonstatic i2c_ali1535 pcmcia_core pcspkr psmouse soundcore i2c_core evdev sr_mod snd_page_alloc alim1535_wdt cdrom fan sg video output toshiba_acpi rfkill thermal backlight ali_agp processor ac button input_polldev battery agpgart ohci_hcd usbcore reiserfs pata_ali libata sd_mod scsi_mod [last unloaded: scsi_wait_scan] > [ 113.921765] > [ 113.921785] Pid: 3272, comm: ipolldevd Not tainted (2.6.28-rc2-1avb #3) PORTEGE 4000 > [ 113.921801] EIP: 0060:[<dfaa4683>] EFLAGS: 00010246 CPU: 0 > [ 113.921854] EIP is at rfkill_force_state+0x53/0x90 [rfkill] > [ 113.921870] EAX: 00000000 EBX: 00000000 ECX: 00000003 EDX: 00000000 > [ 113.921885] ESI: 00000000 EDI: ddd50300 EBP: d8d7af40 ESP: d8d7af24 > [ 113.921900] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 > [ 113.921918] Process ipolldevd (pid: 3272, ti=d8d7a000 task=d8d93c90 task.ti=d8d7a000) > [ 113.921933] Stack: > [ 113.921945] d8d7af38 00000246 dfb029d8 dfb029c0 dfb029d8 dfb029c0 ddd50300 d8d7af5c > [ 113.922014] dfb018e2 01000246 01000000 ddd50300 ddd50314 ddabb8a0 d8d7af68 dfb381c1 > [ 113.922098] 00000000 d8d7afa4 c012ec0a 00000000 00000002 00000000 c012eba8 ddabb8c0 > [ 113.922240] Call Trace: > [ 113.922240] [<dfb018e2>] ? bt_poll_rfkill+0x5c/0x82 [toshiba_acpi] > [ 113.922240] [<dfb381c1>] ? input_polled_device_work+0x11/0x40 [input_polldev] > [ 113.922240] [<c012ec0a>] ? run_workqueue+0xea/0x1f0 > [ 113.922240] [<c012eba8>] ? run_workqueue+0x88/0x1f0 > [ 113.922240] [<dfb381b0>] ? input_polled_device_work+0x0/0x40 [input_polldev] > [ 113.922240] [<c012f047>] ? worker_thread+0x87/0xf0 > [ 113.922240] [<c0132b00>] ? autoremove_wake_function+0x0/0x50 > [ 113.922240] [<c012efc0>] ? worker_thread+0x0/0xf0 > [ 113.922240] [<c013280f>] ? kthread+0x3f/0x80 > [ 113.922240] [<c01327d0>] ? kthread+0x0/0x80 > [ 113.922240] [<c01040d7>] ? kernel_thread_helper+0x7/0x10 > [ 113.922240] Code: 43 54 89 73 54 39 c6 74 11 89 d9 ba 01 00 00 00 b8 40 68 aa df e8 3e 35 69 e0 89 f8 e8 77 fd 85 e0 31 c0 83 c4 10 5b 5e 5f 5d c3 <0f> 0b eb fe 89 f6 8d bc 27 00 00 00 00 be f4 4d aa df bb 5f 01 > [ 113.922240] EIP: [<dfaa4683>] rfkill_force_state+0x53/0x90 [rfkill] SS:ESP 0068:d8d7af24 > [ 113.924700] ---[ end trace 0e404eb40cadd5f0 ]--- Signed-off-by:
Frederik Deweerdt <frederik.deweerdt@gmail.com> Tested-by:
Andrey Borzenkov <arvidjaar@mail.ru> Acked-by:
Len Brown <len.brown@intel.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by:
Philip Langdale <philipl@overt.org> Signed-off-by:
-
Michael Halcrow authored
Tyler Hicks and Dustin Kirkland are now the primary contact points for eCryptfs issues that may arise from this point forward. Signed-off-by:
Michael Halcrow <mhalcrow@us.ibm.com> Acked-by:
Tyler Hicks <tyhicks@linux.vnet.ibm.com> Acked-by:
Dustin Kirkland <kirkland@canonical.com> Signed-off-by:
-
Catalin Marinas authored
The kmem_cache_create() function in the slob allocator passes the SLAB flags as GFP flags to the slob_alloc() function. The patch changes this call to pass GFP_KERNEL as the other allocators seem to do. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Matt Mackall <mpm@selenic.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Mike Frysinger authored
Cc: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Mike Frysinger <vapier.adi@gmail.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
-
- 15 Dec, 2008 2 commits
-
-
David S. Miller authored
Based upon a report from Randy Dunlap. The compat netdev ops assignments need to happen in 8390.c and 8390p.c, not lib8390.c, as only the type specific code can assign the correct function pointers. Signed-off-by: -
Nicolas Pitre authored
Signed-off-by:
Nicolas Pitre <nico@marvell.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
