DEFINE_MUTEX() will automatically initialize buffer_mutex,
no need to call mutex_init() in dell_init().
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

we can now autodetect internal 3G device and already have the threeg
rfkill device. So, we plan to remove threeg sysfs support for it's no
longer necessary.

We also plan to remove interface sysfs file that exposed which ACPI-WMI
interface that was used by acer-wmi driver. It will replaced by information
log when acer-wmi initial.

We keep it around for userspace compatibility reasons, schedule removal
in 2012.

Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (55 commits)
  Revert "drm/i915: Try enabling RC6 by default (again)"
  drm/radeon: Extended DDC Probing for ECS A740GM-M DVI-D Connector
  drm/radeon: Log Subsystem Vendor and Device Information
  drm/radeon: Extended DDC Probing for Connectors with Improperly Wired DDC Lines (here: Asus M2A-VM HDMI)
  drm: Separate EDID Header Check from EDID Block Check
  drm: Add NULL check about irq functions
  drm: Fix irq install error handling
  drm/radeon: fix potential NULL dereference in drivers/gpu/drm/radeon/atom.c
  drm/radeon: clean reg header files
  drm/debugfs: Initialise empty variable
  drm/radeon/kms: add thermal chip quirk for asus 9600xt
  drm/radeon: off by one in check_reg() functions
  drm/radeon/kms: fix version comment due to merge timing
  drm/i915: allow cache sharing policy control
  drm/i915/hdmi: HDMI source product description infoframe support
  drm/i915/hdmi: split infoframe setting from infoframe type code
  drm: track CEA version number if present
  drm/i915: Try enabling RC6 by default (again)
  Revert "drm/i915/dp: Zero the DPCD data before connection probe"
  drm/i915/dp: wait for previous AUX channel activity to clear
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Size mondo queues more sanely.
  sparc: Access kernel TSB using physical addressing when possible.
  sparc: Fix __atomic_add_unless() return value.
  sparc: use kbuild-generic support for true asm-generic header files
  sparc: Use popc when possible for ffs/__ffs/ffz.
  sparc: Set reboot-cmd using reboot data hypervisor call if available.
  sparc: Add some missing hypervisor API groups.
  sparc: Use hweight64() in popc emulation.
  sparc: Use popc if possible for hweight routines.
  sparc: Minor tweaks to Niagara page copy/clear.
  sparc: Sanitize cpu feature detection and reporting.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits)
  ipv6: check for IPv4 mapped addresses when connecting IPv6 sockets
  mlx4: decreasing ref count when removing mac
  net: Fix security_socket_sendmsg() bypass problem.
  net: Cap number of elements for sendmmsg
  net: sendmmsg should only return an error if no messages were sent
  ixgbe: fix PHY link setup for 82599
  ixgbe: fix __ixgbe_notify_dca() bail out code
  igb: fix WOL on second port of i350 device
  e1000e: minor re-order of #include files
  e1000e: remove unnecessary check for NULL pointer
  intel drivers: repair missing flush operations
  macb: restore wrap bit when performing underrun cleanup
  cdc_ncm: fix endianness problem.
  irda: use PCI_VENDOR_ID_*
  mlx4: Fixing Ethernet unicast packet steering
  net: fix NULL dereferences in check_peer_redir()
  bnx2x: Clear MDIO access warning during first driver load
  bnx2x: Fix BCM578xx MAC test
  bnx2x: Fix BCM54618se invalid link indication
  bnx2x: Fix BCM84833 link
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  drivers/ide/cy82c693.c: Add missing pci_dev_put
  ide: Fix irq flags madness

When support for binding to 'mapped INADDR_ANY (::ffff.0.0.0.0)' was added
in 0f8d3c7a the rest of the code
wasn't told so now it's possible to bind IPv6 datagram socket to
::ffff.0.0.0.0, connect it to another IPv4 address and it will all
work except for getsockhame() which does not return the local address
as expected.

To give getsockname() something to work with check for 'mapped INADDR_ANY'
when connecting and update the in-core source addresses appropriately.
Signed-off-by: Max Matveev <makc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For older FW versions, when a Mac address removed from Mac table,
we should set 0 for reference count for the corresponding Mac index.
Fixes a bug where removing Mac from the table still left that entry as
invalid.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Tested-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The sendmmsg() introduced by commit 228e548e "net: Add sendmmsg socket system
call" is capable of sending to multiple different destination addresses.

SMACK is using destination's address for checking sendmsg() permission.
However, security_socket_sendmsg() is called for only once even if multiple
different destination addresses are passed to sendmmsg().

Therefore, we need to call security_socket_sendmsg() for each destination
address rather than only the first destination address.

Since calling security_socket_sendmsg() every time when only single destination
address was passed to sendmmsg() is a waste of time, omit calling
security_socket_sendmsg() unless destination address of previous datagram and
that of current datagram differs.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Anton Blanchard <anton@samba.org>
Cc: stable <stable@kernel.org> [3.0+]
Signed-off-by: David S. Miller <davem@davemloft.net>

To limit the amount of time we can spend in sendmmsg, cap the
number of elements to UIO_MAXIOV (currently 1024).

For error handling an application using sendmmsg needs to retry at
the first unsent message, so capping is simpler and requires less
application logic than returning EINVAL.
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: stable <stable@kernel.org> [3.0+]
Signed-off-by: David S. Miller <davem@davemloft.net>

sendmmsg uses a similar error return strategy as recvmmsg but it
turns out to be a confusing way to communicate errors.

The current code stores the error code away and returns it on the next
sendmmsg call. This means a call with completely valid arguments could
get an error from a previous call.

Change things so we only return an error if no datagrams could be sent.
If less than the requested number of messages were sent, the application
must retry starting at the first failed one and if the problem is
persistent the error will be returned.

This matches the behaviour of other syscalls like read/write - it
is not an error if less than the requested number of elements are sent.
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: stable <stable@kernel.org> [3.0+]
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 4e20fa65.

Francesco Allertsen still has a broken configuration.
Signed-off-by: Dave Airlie <airlied@redhat.com>

There is currently no upper limit on the mondo queue sizes we'll use,
which guarentees that we'll eventually his page allocation limits, and
thus allocation failures, due to MAX_ORDER.

Cap the sizes sanely, current limits are:

CPU  MONDO	2 * max_possible_cpus
DEV  MONDO	256 (basically NR_IRQS)
RES  MONDO	128
NRES MONDO	4
Signed-off-by: David S. Miller <davem@davemloft.net>

On sun4v this is basically required since we point the hypervisor and
the TSB walking hardware at these tables using physical addressing
too.
Signed-off-by: David S. Miller <davem@davemloft.net>

This isn't really critical any more, since other patches (commit
298507d4: "shm: optimize exit_shm()") have caused us to not actually
need to touch the rw_mutex unless there are actual shm segments
associated with the namespace, but we really should do tne shm_init_ns()
earlier than we do now.

This, together with commit 288d5abe ("Boot up with usermodehelper
disabled") will mean that we really do initialize the initial ipc
namespace data structure before we run any tasks.
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  RCUify freeing acls, let check_acl() go ahead in RCU mode if acl is cached
  get rid of boilerplate switches in posix_acl.h
  fix block device fallout from ->fsync() changes

* 'fixefi' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  efi: Fix argument types for SetVariable() for ia64

Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  slab, lockdep: Annotate the locks before using them
  lockdep: Clear whole lockdep_map on initialization
  slab, lockdep: Annotate slab -> rcu -> debug_object -> slab
  lockdep: Fix up warning
  lockdep: Fix trace_hardirqs_on_caller()
  futex: Fix regression with read only mappings

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  dmaengine: use DEFINE_IDR for static initialization
  ioat: fix xor_idx_to_desc
  Avoid section type conflict in dma/ioat/dma_v3.c
  ioat: Adding PCI IDs for IOAT devices on SandyBridge platforms

Commit a0bfa137 mispells
cpuidle_idle_call() on ARM and SH code.  Fix this to be consistent.

Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: x86@kernel.org
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: David Brown <davidb@codeaurora.org>
[ Also done by Mark Brown - th ebug has been around forever, and was
  noticed in -next, but the idle tree never picked it up. Bad bad bad ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The spec says this takes uint32 for attributes, not uintn.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6:
  Revert "dt: add of_alias_scan and of_alias_get_id"
  dt: remove of_alias_get_id() reference

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6:
  [PARISC] wire up sendmmsg syscall
  [PARISC] fix return type of __atomic64_add_return
  [PARISC] Fix futex support

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] signal: use set_restore_sigmask() helper
  [S390] smp: remove pointless comments in startup_secondary()
  [S390] qdio: Use kstrtoul_from_user
  [S390] sclp_async: Use kstrtoul_from_user
  [S390] exec: remove redundant set_fs(USER_DS)
  [S390] cpu hotplug: on cpu start wait until being marked active
  [S390] signal: convert to use set_current_blocked()
  [S390] asm offsets: fix coding style
  [S390] Add support for IBM zEnterprise 114
  [S390] dasd: check if raw track access is supported
  [S390] Use diagnose 308 for system reset
  [S390] Export store_status() function
  [S390] dasd: use vmalloc for statistics input buffer
  [S390] Add PSW restart shutdown trigger
  [S390] missing return in page_table_alloc_pgste
  [S390] qdio: 2nd stage retry on SIGA-W busy conditions

While `pci_eisa_driver' still refer `pci_eisa_init', the .probe() function
should not be called after init memory release, as pointed out by commit
74b9a297. The structure is still referenced in the drivers subsystem, and can
be accesseed through sysfs, so the modpost warning is a false positive. Mark
it as such.

In the same time, the warning referenced in 005bdad7 did only mention
`pci_eisa_driver', not `pci_eisa_pci_tbl', so remove its marking.

Broken-by: Arnaud Lacombe <lacombar@gmail.com> (in 005bdad7)
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

   ECS A740GM-M with ATI RADEON 2100 sends data to i2c bus
   for a DVI connector that is not implemented/existent on the board.

   Fix by applying extented DDC probing for this connector.

   Requires [PATCH] drm/radeon: Extended DDC Probing for Connectors
   with Improperly Wired DDC Lines

   Tested for kernel 2.6.38 on Asus ECS A740GM-M board

   BugLink: http://bugs.launchpad.net/bugs/810926

Cc: <stable@kernel.org>
Signed-off-by: Thomas Reim <reimth@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

    Log PCI subsystem vendor and subsystem device ID in addition to
    PCI vendor and device ID during kernel mode initialisation. This helps
    to better identify radeon devices of third-party vendors, e. g. for
    bug analysis.

    Tested for kernel 2.6.35, 2.6.38 and 3.0 on Asus M2A-VM HDMI board

Cc: <stable@kernel.org>
Signed-off-by: Thomas Reim <reimth@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon: Extended DDC Probing for Connectors with Improperly Wired DDC Lines (here: Asus M2A-VM HDMI)

    Some integrated ATI Radeon chipset implementations with add-on HDMI card
    (e. g. Asus M2A-VM HDMI) indicate the availability of a DDC even
    when the add-on card is not plugged in or HDMI is disabled in BIOS setup.
    In this case, drm_get_edid() and drm_edid_block_valid() periodically
    dump data and kernel errors into system log files and onto terminals.
    For these connectors DDC probing is extended by a check for a correct
    EDID header. Only in case a valid EDID header is also found, the
    (HDMI or DVI) connector will be used by the Radeon driver. This prevents
    the kernel driver from useless flooding of logs and terminal sessions with
    EDID dumps and error messages.
    This patch adds a flag 'requires_extended_probe' to the radeon_connector
    structure. In function radeon_connector_needs_extended_probe() this flag
    can be set on a chipset family/vendor/connector type specific basis.
    In addition, function radeon_ddc_probe() has been adapted to perform
    extended DDC probing if required by the connector's flag.
    Requires function drm_edid_header_is_valid() in DRM module provided by
    [PATCH] drm: Separate EDID Header Check from EDID Block Check.

    Tested for kernel 2.6.35, 2.6.38 and 3.0 on Asus M2A-VM HDMI board

    BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=668196
    BugLink: http://bugs.launchpad.net/bugs/7228066

Cc: <stable@kernel.org>
Signed-off-by: Thomas Reim <reimth@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

    Provides function drm_edid_header_is_valid() for EDID header check
    and replaces EDID header check part of function drm_edid_block_valid()
    by a call of drm_edid_header_is_valid().
    This is a prerequisite to extend DDC probing, e. g. in function
    radeon_ddc_probe() for Radeon devices, by a central EDID header check.

    Tested for kernel 2.6.35, 2.6.38 and 3.0

Cc: <stable@kernel.org>
Signed-off-by: Thomas Reim <reimth@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The struct drm_driver has some function pointers for irq. They are
gpu specific and some functions aren't essential things. This can
prevents creation of unnecessary dummy function for irq.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The registered irq should be unregistered by free_irq() if
irq_postinstall() returns the error after request_irq() is called
successfully.

[airlied: add vga switcheroo disable]
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

kzalloc() can return NULL, so I added check for it
Signed-off-by: Bojan Prtvar <prtvar.b@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Reg header files are generated so they are not cleaned automagically.
They need to be added to the clean-files list.
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Dave Airlie <airlied@redhat.com>

[airlied: move char declaration]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'drm-intel-next' of ssh://master.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6 into drm-fixes

* 'drm-intel-next' of ssh://master.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: (42 commits)
  drm/i915: allow cache sharing policy control
  drm/i915/hdmi: HDMI source product description infoframe support
  drm/i915/hdmi: split infoframe setting from infoframe type code
  drm: track CEA version number if present
  drm/i915: Try enabling RC6 by default (again)
  Revert "drm/i915/dp: Zero the DPCD data before connection probe"
  drm/i915/dp: wait for previous AUX channel activity to clear
  drm/i915: don't use uninitialized EDID bpc values when picking pipe bpp
  drm/i915/pch: Save/restore PCH_PORT_HOTPLUG across suspend
  drm/i915: apply phase pointer override on SNB+ too
  drm/i915: Add quirk to disable SSC on Sony Vaio Y2
  drm/i915: provide more error output when mode sets fail
  drm/i915: add GPU max frequency control file
  i915: add Dell OptiPlex FX170 to intel_no_lvds
  drm/i915: Ignore GPU wedged errors while pinning scanout buffers
  drm/i915/hdmi: send AVI info frames on ILK+ as well
  drm/i915: fix CB tuning check for ILK+
  drm/i915: Flush other plane register writes
  drm/i915: flush plane control changes on ILK+ as well
  drm/i915: apply timing generator bug workaround on CPT and PPT
  ...

The board has an lm63 compatible thermal chip, but no
thermal chip entry in the vbios tables.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=39513Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This off by one range check was copy and pasted a couple places.
It's not really harmful, but we should fix it anyway.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Compute cs support was actually added in 2.11.0 rather than
2.10.0, but the patch was written prior.  Update comment
to match.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Fix pointer to setup_link for 82599.

This resolves some link issues when advertising modes unsupported
by the link partner.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>