- 27 Jan, 2020 36 commits
-
-
Sean Christopherson authored
Reload the current thread's FPU state, which contains the guest's FPU state, to the CPU registers if necessary during vcpu_enter_guest(). TIF_NEED_FPU_LOAD can be set any time control is transferred out of KVM, e.g. if I/O is triggered during a KVM call to get_user_pages() or if a softirq occurs while KVM is scheduled in. Moving the handling of TIF_NEED_FPU_LOAD from vcpu_enter_guest() to kvm_arch_vcpu_load(), effectively kvm_sched_in(), papered over a bug where kvm_put_guest_fpu() failed to account for TIF_NEED_FPU_LOAD. The easiest way to the kvm_put_guest_fpu() bug was to run with involuntary preemption enable, thus handling TIF_NEED_FPU_LOAD during kvm_sched_in() made the bug go away. But, removing the handling in vcpu_enter_guest() exposed KVM to the rare case of a softirq triggering kernel_fpu_begin() between vcpu_load() and vcpu_enter_guest(). Now that kvm_{load,put}_guest_fpu() correctly handle TIF_NEED_FPU_LOAD, revert the commit to both restore the vcpu_enter_guest() behavior and eliminate the superfluous switch_fpu_return() in kvm_arch_vcpu_load(). Note, leaving the handling in kvm_arch_vcpu_load() isn't wrong per se, but it is unnecessary, and most critically, makes it extremely difficult to find bugs such as the kvm_put_guest_fpu() issue due to shrinking the window where a softirq can corrupt state. A sample trace triggered by warning if TIF_NEED_FPU_LOAD is set while vcpu state is loaded: <IRQ> gcmaes_crypt_by_sg.constprop.12+0x26e/0x660 ? 0xffffffffc024547d ? __qdisc_run+0x83/0x510 ? __dev_queue_xmit+0x45e/0x990 ? ip_finish_output2+0x1a8/0x570 ? fib4_rule_action+0x61/0x70 ? fib4_rule_action+0x70/0x70 ? fib_rules_lookup+0x13f/0x1c0 ? helper_rfc4106_decrypt+0x82/0xa0 ? crypto_aead_decrypt+0x40/0x70 ? crypto_aead_decrypt+0x40/0x70 ? crypto_aead_decrypt+0x40/0x70 ? esp_output_tail+0x8f4/0xa5a [esp4] ? skb_ext_add+0xd3/0x170 ? xfrm_input+0x7a6/0x12c0 ? xfrm4_rcv_encap+0xae/0xd0 ? xfrm4_transport_finish+0x200/0x200 ? udp_queue_rcv_one_skb+0x1ba/0x460 ? udp_unicast_rcv_skb.isra.63+0x72/0x90 ? __udp4_lib_rcv+0x51b/0xb00 ? ip_protocol_deliver_rcu+0xd2/0x1c0 ? ip_local_deliver_finish+0x44/0x50 ? ip_local_deliver+0xe0/0xf0 ? ip_protocol_deliver_rcu+0x1c0/0x1c0 ? ip_rcv+0xbc/0xd0 ? ip_rcv_finish_core.isra.19+0x380/0x380 ? __netif_receive_skb_one_core+0x7e/0x90 ? netif_receive_skb_internal+0x3d/0xb0 ? napi_gro_receive+0xed/0x150 ? 0xffffffffc0243c77 ? net_rx_action+0x149/0x3b0 ? __do_softirq+0xe4/0x2f8 ? handle_irq_event_percpu+0x6a/0x80 ? irq_exit+0xe6/0xf0 ? do_IRQ+0x7f/0xd0 ? common_interrupt+0xf/0xf </IRQ> ? irq_entries_start+0x20/0x660 ? vmx_get_interrupt_shadow+0x2f0/0x710 [kvm_intel] ? kvm_set_msr_common+0xfc7/0x2380 [kvm] ? recalibrate_cpu_khz+0x10/0x10 ? ktime_get+0x3a/0xa0 ? kvm_arch_vcpu_ioctl_run+0x107/0x560 [kvm] ? kvm_init+0x6bf/0xd00 [kvm] ? __seccomp_filter+0x7a/0x680 ? do_vfs_ioctl+0xa4/0x630 ? security_file_ioctl+0x32/0x50 ? ksys_ioctl+0x60/0x90 ? __x64_sys_ioctl+0x16/0x20 ? do_syscall_64+0x5f/0x1a0 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 ---[ end trace 9564a1ccad733a90 ]--- This reverts commit e7517324. Fixes: e7517324 ("KVM: X86: Fix fpu state crash in kvm guest") Reported-by:Derek Yerger <derek@djy.llc> Reported-by: kernel@najdan.com Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Thomas Lambertz <mail@thomaslambertz.de> Cc: Rik van Riel <riel@surriel.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Lock the FPU regs and reload the current thread's FPU state, which holds the guest's FPU state, to the CPU registers if necessary prior to accessing guest FPU state as part of emulation. kernel_fpu_begin() can be called from softirq context, therefore KVM must ensure softirqs are disabled (locking the FPU regs disables softirqs) when touching CPU FPU state. Note, for all intents and purposes this reverts commit 6ab0b9fe ("x86,kvm: remove KVM emulator get_fpu / put_fpu"), but at the time it was applied, removing get/put_fpu() was correct. The re-introduction of {get,put}_fpu() is necessitated by the deferring of FPU state load. Fixes: 5f409e20 ("x86/fpu: Defer FPU state load until return to userspace") Cc: stable@vger.kernel.org Signed-off-by:
-
Sean Christopherson authored
Handle TIF_NEED_FPU_LOAD similar to how fpu__copy() handles the flag when duplicating FPU state to a new task struct. TIF_NEED_FPU_LOAD can be set any time control is transferred out of KVM, be it voluntarily, e.g. if I/O is triggered during a KVM call to get_user_pages, or involuntarily, e.g. if softirq runs after an IRQ occurs. Therefore, KVM must account for TIF_NEED_FPU_LOAD whenever it is (potentially) accessing CPU FPU state. Fixes: 5f409e20 ("x86/fpu: Defer FPU state load until return to userspace") Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Bonzini authored
This reverts commit 95145c25. The next few patches will fix the issue so the warning is not needed anymore; revert it separately to simplify application to stable kernels. Signed-off-by:
-
Miaohe Lin authored
Short-circuit kvm_apic_accept_pic_intr() when pic intr is accepted, there is no need to proceed further. Also remove unnecessary var r. Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
Miaohe Lin authored
The exception pending event is cleared by kvm_clear_exception_queue(). We shouldn't clear it again. Signed-off-by:
-
Marios Pomonis authored
This fixes Spectre-v1/L1TF vulnerabilities in intel_find_fixed_event() and intel_rdpmc_ecx_to_pmc(). kvm_rdpmc() (ancestor of intel_find_fixed_event()) and reprogram_fixed_counter() (ancestor of intel_rdpmc_ecx_to_pmc()) are exported symbols so KVM should treat them conservatively from a security perspective. Fixes: 25462f7f ("KVM: x86/vPMU: Define kvm_pmu_ops to support vPMU function dispatch") Signed-off-by:
Nick Finco <nifi@google.com> Signed-off-by:
Marios Pomonis <pomonis@google.com> Reviewed-by:
Andrew Honig <ahonig@google.com> Cc: stable@vger.kernel.org Reviewed-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
-
Marios Pomonis authored
This fixes a Spectre-v1/L1TF vulnerability in __kvm_set_dr() and kvm_get_dr(). Both kvm_get_dr() and kvm_set_dr() (a wrapper of __kvm_set_dr()) are exported symbols so KVM should tream them conservatively from a security perspective. Fixes: 020df079 ("KVM: move DR register access handling into generic code") Signed-off-by:
-
Marios Pomonis authored
This fixes a Spectre-v1/L1TF vulnerability in vmx_handle_exit(). While exit_reason is set by the hardware and therefore should not be attacker-influenced, an unknown exit_reason could potentially be used to perform such an attack. Fixes: 55d2375e ("KVM: nVMX: Move nested code to dedicated files") Signed-off-by:
-
Marios Pomonis authored
This fixes Spectre-v1/L1TF vulnerabilities in vmx_read_guest_seg_selector(), vmx_read_guest_seg_base(), vmx_read_guest_seg_limit() and vmx_read_guest_seg_ar(). When invoked from emulation, these functions contain index computations based on the (attacker-influenced) segment value. Using constants prevents the attack. Cc: stable@vger.kernel.org Signed-off-by: -
Marios Pomonis authored
This fixes a Spectre-v1/L1TF vulnerability in set_msr_mce() and get_msr_mce(). Both functions contain index computations based on the (attacker-controlled) MSR number. Fixes: 890ca9ae ("KVM: Add MCE support") Signed-off-by:
-
Marios Pomonis authored
This fixes a Spectre-v1/L1TF vulnerability in the get_gp_pmc() and get_fixed_pmc() functions. They both contain index computations based on the (attacker-controlled) MSR number. Fixes: 25462f7f ("KVM: x86/vPMU: Define kvm_pmu_ops to support vPMU function dispatch") Signed-off-by:
-
Marios Pomonis authored
KVM: x86: Protect MSR-based index computations in fixed_msr_to_seg_unit() from Spectre-v1/L1TF attacks This fixes a Spectre-v1/L1TF vulnerability in fixed_msr_to_seg_unit(). This function contains index computations based on the (attacker-controlled) MSR number. Fixes: de9aef5e ("KVM: MTRR: introduce fixed_mtrr_segment table") Signed-off-by:
-
Marios Pomonis authored
This fixes a Spectre-v1/L1TF vulnerability in kvm_lapic_reg_write(). This function contains index computations based on the (attacker-controlled) MSR number. Fixes: 0105d1a5 ("KVM: x2apic interface to lapic") Signed-off-by:
-
Marios Pomonis authored
This fixes a Spectre-v1/L1TF vulnerability in ioapic_write_indirect(). This function contains index computations based on the (attacker-controlled) IOREGSEL register. This patch depends on patch "KVM: x86: Protect ioapic_read_indirect() from Spectre-v1/L1TF attacks". Fixes: 70f93dae ("KVM: Use temporary variable to shorten lines.") Signed-off-by:
-
Marios Pomonis authored
This fixes a Spectre-v1/L1TF vulnerability in ioapic_read_indirect(). This function contains index computations based on the (attacker-controlled) IOREGSEL register. Fixes: a2c118bf ("KVM: Fix bounds checking in ioapic indirect register reads (CVE-2013-1798)") Signed-off-by:
-
Marios Pomonis authored
This fixes a Spectre-v1/L1TF vulnerability in picdev_write(). It replaces index computations based on the (attacked-controlled) port number with constants through a minor refactoring. Fixes: 85f455f7 ("KVM: Add support for in-kernel PIC emulation") Signed-off-by:
-
Marios Pomonis authored
This fixes Spectre-v1/L1TF vulnerabilities in kvm_hv_msr_get_crash_data() and kvm_hv_msr_set_crash_data(). These functions contain index computations that use the (attacker-controlled) MSR number. Fixes: e7d9513b ("kvm/x86: added hyper-v crash msrs into kvm hyperv context") Signed-off-by:
-
Marios Pomonis authored
This fixes a Spectre-v1/L1TF vulnerability in x86_decode_insn(). kvm_emulate_instruction() (an ancestor of x86_decode_insn()) is an exported symbol, so KVM should treat it conservatively from a security perspective. Fixes: 045a282c ("KVM: emulator: implement fninit, fnstsw, fnstcw") Signed-off-by:
-
John Allen authored
Current SVM implementation does not have support for handling PKU. Guests running on a host with future AMD cpus that support the feature will read garbage from the PKRU register and will hit segmentation faults on boot as memory is getting marked as protected that should not be. Ensure that cpuid from SVM does not advertise the feature. Signed-off-by:
John Allen <john.allen@amd.com> Cc: stable@vger.kernel.org Fixes: 0556cbdc ("x86/pkeys: Don't check if PKRU is zero before writing it") Signed-off-by:
-
Sean Christopherson authored
Open code the allocation and freeing of the vcpu->run page in kvm_vm_ioctl_create_vcpu() and kvm_vcpu_destroy() respectively. Doing so allows kvm_vcpu_init() to be a pure init function and eliminates kvm_vcpu_uninit() entirely. Signed-off-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
-
Sean Christopherson authored
Move the putting of vcpu->pid to kvm_vcpu_destroy(). vcpu->pid is guaranteed to be NULL when kvm_vcpu_uninit() is called in the error path of kvm_vm_ioctl_create_vcpu(), e.g. it is explicitly nullified by kvm_vcpu_init() and is only changed by KVM_RUN. No functional change intended. Acked-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
-
Sean Christopherson authored
Remove kvm_arch_vcpu_init() and kvm_arch_vcpu_uninit() now that all arch specific implementations are nops. Acked-by:
-
Sean Christopherson authored
Add an arm specific hook to free the arm64-only sve_state. Doing so eliminates the last functional code from kvm_arch_vcpu_uninit() across all architectures and paves the way for removing kvm_arch_vcpu_init() and kvm_arch_vcpu_uninit() entirely. Signed-off-by:
-
Sean Christopherson authored
Fold init() into create() now that the two are called back-to-back by common KVM code (kvm_vcpu_init() calls kvm_arch_vcpu_init() as its last action, and kvm_vm_ioctl_create_vcpu() calls kvm_arch_vcpu_create() immediately thereafter). Rinse and repeat for kvm_arch_vcpu_uninit() and kvm_arch_vcpu_destroy(). This paves the way for removing kvm_arch_vcpu_{un}init() entirely. Note, calling kvmppc_mmu_destroy() if kvmppc_core_vcpu_create() fails may or may not be necessary. Move it along with the more obvious call to kvmppc_subarch_vcpu_uninit() so as not to inadvertantly introduce a functional change and/or bug. No functional change intended. Signed-off-by: -
Sean Christopherson authored
Fold init() into create() now that the two are called back-to-back by common KVM code (kvm_vcpu_init() calls kvm_arch_vcpu_init() as its last action, and kvm_vm_ioctl_create_vcpu() calls kvm_arch_vcpu_create() immediately thereafter). This paves the way for removing kvm_arch_vcpu_{un}init() entirely. Note, there is no associated unwinding in kvm_arch_vcpu_uninit() that needs to be relocated (to kvm_arch_vcpu_destroy()). No functional change intended. Signed-off-by: -
Sean Christopherson authored
Fold init() into create() now that the two are called back-to-back by common KVM code (kvm_vcpu_init() calls kvm_arch_vcpu_init() as its last action, and kvm_vm_ioctl_create_vcpu() calls kvm_arch_vcpu_create() immediately thereafter). Rinse and repeat for kvm_arch_vcpu_uninit() and kvm_arch_vcpu_destroy(). This paves the way for removing kvm_arch_vcpu_{un}init() entirely. No functional change intended. Signed-off-by: -
Sean Christopherson authored
Fold init() into create() now that the two are called back-to-back by common KVM code (kvm_vcpu_init() calls kvm_arch_vcpu_init() as its last action, and kvm_vm_ioctl_create_vcpu() calls kvm_arch_vcpu_create() immediately thereafter). This paves the way for removing kvm_arch_vcpu_init() entirely. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Remove kvm_arch_vcpu_setup() now that all arch specific implementations are nops. Acked-by:
-
Sean Christopherson authored
Fold setup() into create() now that the two are called back-to-back by common KVM code. This paves the way for removing kvm_arch_vcpu_setup(). Note, BookE directly implements kvm_arch_vcpu_setup() and PPC's common kvm_arch_vcpu_create() is responsible for its own cleanup, thus the only cleanup required when directly invoking kvmppc_core_vcpu_setup() is to call .vcpu_free(), which is the BookE specific portion of PPC's kvm_arch_vcpu_destroy() by way of kvmppc_core_vcpu_free(). No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Rename kvm_arch_vcpu_setup() to kvm_s390_vcpu_setup() and manually call the new function during kvm_arch_vcpu_create(). Define an empty kvm_arch_vcpu_setup() as it's still required for compilation. This is effectively a nop as kvm_arch_vcpu_create() and kvm_arch_vcpu_setup() are called back-to-back by common KVM code. Obsoleting kvm_arch_vcpu_setup() paves the way for its removal. Note, gmap_remove() is now called if setup fails, as s390 was previously freeing it via kvm_arch_vcpu_destroy(), which is called by common KVM code if kvm_arch_vcpu_setup() fails. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Fold setup() into create() now that the two are called back-to-back by common KVM code. This paves the way for removing kvm_arch_vcpu_setup(). Note, there is no unwind function associated with kvm_arch_vcpu_setup(), i.e. no teardown path that also needs to be moved. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Fold setup() into create() now that the two are called back-to-back by common KVM code. This paves the way for removing kvm_arch_vcpu_setup(). Signed-off-by:
-
Sean Christopherson authored
Initialize the preempt notifier immediately in kvm_vcpu_init() to pave the way for removing kvm_arch_vcpu_setup(), i.e. to allow arch specific code to call vcpu_load() during kvm_arch_vcpu_create(). Back when preemption support was added, the location of the call to init the preempt notifier was perfectly sane. The overall vCPU creation flow featured a single arch specific hook and the preempt notifer was used immediately after its initialization (by vcpu_load()). E.g.: vcpu = kvm_arch_ops->vcpu_create(kvm, n); if (IS_ERR(vcpu)) return PTR_ERR(vcpu); preempt_notifier_init(&vcpu->preempt_notifier, &kvm_preempt_ops); vcpu_load(vcpu); r = kvm_mmu_setup(vcpu); vcpu_put(vcpu); if (r < 0) goto free_vcpu; Today, the call to preempt_notifier_init() is sandwiched between two arch specific calls, kvm_arch_vcpu_create() and kvm_arch_vcpu_setup(), which needlessly forces x86 (and possibly others?) to split its vCPU creation flow. Init the preempt notifier prior to any arch specific call so that each arch can independently decide how best to organize its creation flow. Acked-by: -
Sean Christopherson authored
Unexport kvm_vcpu_cache and kvm_vcpu_{un}init() and make them static now that they are referenced only in kvm_main.c. Acked-by: -
Sean Christopherson authored
Now that all architectures tightly couple vcpu allocation/free with the mandatory calls to kvm_{un}init_vcpu(), move the sequences verbatim to common KVM code. Move both allocation and initialization in a single patch to eliminate thrash in arch specific code. The bisection benefits of moving the two pieces in separate patches is marginal at best, whereas the odds of introducing a transient arch specific bug are non-zero. Acked-by:
-
- 24 Jan, 2020 4 commits
-
-
Sean Christopherson authored
Add kvm_vcpu_destroy() and wire up all architectures to call the common function instead of their arch specific implementation. The common destruction function will be used by future patches to move allocation and initialization of vCPUs to common KVM code, i.e. to free resources that are allocated by arch agnostic code. No functional change intended. Acked-by:
-
Sean Christopherson authored
Move the call to kvm_vcpu_uninit() in kvm_arch_vcpu_destroy() down a few lines so that it is invoked immediately prior to freeing the vCPU. This paves the way for moving the uninit and free sequence to common KVM code without an associated functional change. Signed-off-by:
-
Sean Christopherson authored
Move the call to kvm_vcpu_uninit() in kvm_arch_vcpu_destroy() down a few lines so that it is invoked immediately prior to freeing the vCPU. This paves the way for moving the uninit and free sequence to common KVM code without an associated functional change. Signed-off-by:
-
Sean Christopherson authored
Now that s390's implementation of kvm_arch_vcpu_init() is empty, move the call to kvm_vcpu_init() above the allocation of the sie_page. This paves the way for moving vcpu allocation and initialization into common KVM code without any associated functional change. Signed-off-by:
-
