- 09 Jul, 2018 3 commits
-
-
Chris Wilson authored
With a broken GPU we expect it to fail during the initial GPU setup where do a couple of context switches to record the defaults. This is a task that takes a few milliseconds even on the slowest of devices, but we may have to wait 60s for hangcheck to give in and declare the machine inoperable. In this a case where any gpu hang is unacceptable, both from a timeliness and practical standpoint. We can therefore set a timeout on our wait-for-idle that is shorter than the hangcheck (which may be up to 60s for a declaring a wedged driver) and so detect the broken GPU much more quickly during driver load (and so prevent stalling userspace for ages). Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709122044.7028-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
Usually we have no idea about the upper bound we need to wait to catch up with userspace when idling the device, but in a few situations we know the system was idle beforehand and can provide a short timeout in order to very quickly catch a failure, long before hangcheck kicks in. In the following patches, we will use the timeout to curtain two overly long waits, where we know we can expect the GPU to complete within a reasonable time or declare it broken. In particular, with a broken GPU we expect it to fail during the initial GPU setup where do a couple of context switches to record the defaults. This is a task that takes a few milliseconds even on the slowest of devices, but we may have to wait 60s for hangcheck to give in and declare the machine inoperable. In this a case where any gpu hang is unacceptable, both from a timeliness and practical standpoint. The other improvement is that in selftests, we do not need to arm an independent timer to inject a wedge, as we can just limit the timeout on the wait directly. v2: Include the timeout parameter in the trace. Signed-off-by:
-
Chris Wilson authored
i915g has a slightly different tiling layout, and so requires a different reference swizzle pattern. Testcase: igt/drv_selftests/live_objects #gdg Signed-off-by:
-
- 07 Jul, 2018 1 commit
-
-
Chris Wilson authored
In the next patch, we will want a third distinct class of timeline that may overlap with the current pair of client and engine timeline classes. Rather than use the ad hoc markup of SINGLE_DEPTH_NESTING, initialise the different timeline classes with an explicit subclass. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180706210710.16251-1-chris@chris-wilson.co.uk
-
- 06 Jul, 2018 36 commits
-
-
Chris Wilson authored
Inside the mock GEM device, we try to grab the runtime pm for the fake device to prevent it from ever suspending. However, if CONFIG_PM is not set, trying to obtain the wakref returns an error which we WARN about. Suppress the expected warning. Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180706205947.11209-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
clflush is an unserialised instruction and the IA manual strongly advises you to serialise it with a mb. To be cautious, apply one before and one after, so that it is serialised with both writes and reads without worrying too much about the required direction. Signed-off-by:
-
Chris Wilson authored
Using a VMA on more than one timeline concurrently is the exception rather than the rule (using it concurrently on multiple engines). As we expect to only use one active tracker, store the most recently used tracker inside the i915_vma itself and only fallback to the rbtree if we need a second or more concurrent active trackers. v2: Comments on how we overwrite any existing last_active cache. v3: __list_del_entry() before list_replace_init() is confusing and, much more important, entirely redundant. v4: Note that both last_active and the rbtree may be simultaneously tracking this timeline, albeit with different requests, and so the vma may be retired twice for the same timeline. v5: No, that list_del is required! Signed-off-by:
-
Chris Wilson authored
In the next patch, we will want to be able to use more flexible request timelines that can hop between engines. From the vma pov, we can then not rely on the binding of this request to an engine and so can not ensure that different requests are ordered through a per-engine timeline, and so we must track activity of all timelines. (We track activity on the vma itself to prevent unbinding from HW before the HW has finished accessing it.) v2: Switch to a rbtree for 32b safety (since using u64 as a radixtree index is fraught with aliasing of unsigned longs). v3: s/lookup_active/active_instance/ because we can never agree on names Signed-off-by:
-
Chris Wilson authored
i915_vma_move_to_active() has grown beyond its execbuf origins, and should take its rightful place in i915_vma.c as a method for i915_vma! Signed-off-by:
-
Chris Wilson authored
Handling such a late error in request construction is tricky, but to accommodate future patches which may allocate here, we potentially could err. To handle the error after already adjusting global state to track the new request, we must finish and submit the request. But we don't want to use the request as not everything is being tracked by it, so we opt to cancel the commands inside the request. Signed-off-by:
-
Chris Wilson authored
In the next patch, we will want to start skipping requests on failing to complete their payloads. So export the utility function current used to make requests inoperable following a failed gpu reset. Signed-off-by:
-
Chris Wilson authored
Currently all callers are responsible for adding the vma to the active timeline and then exporting its fence. Combine the two operations into i915_vma_move_to_active() to move all the extra handling from the callers to the single site. Signed-off-by:
-
Chris Wilson authored
We always want to use a virtual address (i.e. use the GTT) for MI_STORE_DWORD_IMM, but forgot the ever so important flag in live_hangcheck for gen3. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180706142323.25699-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
Replace the magic bit with the proper symbolic name for instructing MI_STORE_DWORD_IMM to use a virtual address (on gen3) or the global GTT address (still virtual!) on gen4+. Signed-off-by:
-
Chris Wilson authored
Limit the GTT size we try and allocate to ensure that it fits within RAM and does not trigger the oomkiller indiscriminately. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180706125338.24432-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
We already maually control the CPU cache for our page table directories, so we can tell the dma mapper to skip doing it as well. Signed-off-by:
-
Chris Wilson authored
As we propagate back the error to the caller for them to handle, we do not need the lowest level spitting out a redundant warning upon an allocation failure inside dma_map_page(). Signed-off-by:
-
Chris Wilson authored
If we have just completed a WC write, we must ensure that the WCB (Write Combining Buffer) is flushed out to main memory before we can expect to see the results. This is especially important when mixing WC with GTT as the physical paths are different and cachelines are not naturally flushed. Testcase: igt/drv_selftests/live_coherency #gdg Signed-off-by:
-
Chris Wilson authored
If the GPU is irrecoverably wedged, we can not execute any requests making testing execlists (request execution) pointless. Skip! Signed-off-by:
-
Chris Wilson authored
If the HW (or driver) doesn't support logical contexts, don't pretend we gain anything from trying to execute GPU commands with them. At best it reports -ENODEV, which is an unhelpful failure that we should just skip. v2: Be more specific and check the driver/engine caps for logical (HW) context support. Signed-off-by:
-
Chris Wilson authored
Avoid looking at the magical engines[RCS] to decide if the HW and driver supports logical contexts, and instead record that knowledge during initialisation. Signed-off-by:
-
Imre Deak authored
We can simplify the encoder's get_power_domains() hook by calling it only if the encoder is active. That way the hook can return its power domains unconditionally without checking the active state by calling encoder::get_hw_state(). This get_hw_state() query is in fact redundant since it's already done by intel_modeset_readout_hw_state() setting the encoder's crtc or leaving it NULL accordingly. Let's use this fact to decide if the encoder is active. While at it clarify the comment in intel_ddi_get_power_domains() about primary vs. fake MST encoders and make sure we never do an incorrect encoder->dig_port cast for fake MST encoders. Suggested-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Maarten Lankhorst authored
This interface is deprecated, and has been replaced by the upstream drm crc interface. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Tomi Sarvela <tomi.p.sarvela@intel.com> Cc: Petri Latvala <petri.latvala@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180628072303.14175-1-maarten.lankhorst@linux.intel.com
-
Chris Wilson authored
If the GPU is terminally wedged we cannot submit any requests into a context, completely unfulfilling our purpose of doing so. As this expectedly fails, skip over the test. Signed-off-by:
-
Chris Wilson authored
We test the GPU handling of huge pages by submitting requests that write into a huge page, but if the GPU is irrecoverably wedged we cannot submit any requests. As the test expectedly fails, skip over it. Signed-off-by:
-
Chris Wilson authored
If the GPU is irrecoverably wedged, we cannot submit any requests and so cannot make the GTT busy in order to test evicting active objects. As this expectedly fails, skip over the test. Signed-off-by:
-
Chris Wilson authored
If the GPU is irrecoverably wedged, we cannot submit any request and therefore cannot query the register state of the context (which is done using the GPU command stream). So skip over the test as it expectedly fails. Signed-off-by:
-
Chris Wilson authored
If the GPU is irrecoverably wedge, we cannot submit any request and so all of the request selftests will expectedly fail. Skip over them. Signed-off-by:
-
Chris Wilson authored
If the GPU is wedged, we cannot make the object busy as trying to submit a request will generate -EIO. Skip to the end of the test. Signed-off-by:
-
Chris Wilson authored
If the GPU is irrecoverably broken, we can not use it to dirty memory and check for cache coherency with the CPU. All we can do is simply skip over the GPU subtests and focus on the CPU domains (WC, WB) cache management. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107127Signed-off-by:
-
Chris Wilson authored
As we keep VMA around until the object is destroyed, when testing partial tiling we instantiate many, many VMA (as the object is huge allowing for many different partial regions). We test elsewhere our handling of populating large objects with a full set of VMA and checking we can retrieve them afterwards, but in this test we incur the cost of flushing all VMA after every GTT write, dramatically slowing down the test. References: https://bugs.freedesktop.org/show_bug.cgi?id=107130Signed-off-by:
-
Chris Wilson authored
Having found the error causing the IGT test to fail, downgrade the verbose logging so that we stop flooding the syslogs as we deliberately provoke it many thousands of time during selftests. References: 10195b1e ("drm/i915: Show vma allocator stack when in doubt") Signed-off-by:
-
Madhav Chauhan authored
This patch defines AUX lane registers for PORT_PCS_DW1, PORT_TX_DW2, PORT_TX_DW4, PORT_TX_DW5 used during dsi enabling. v2: Review comments from Jani N: - Define _ICL_PORT_PCS_DW1_AUX_A for consistency - Three spaces for bitfield definition. Signed-off-by:Madhav Chauhan <madhav.chauhan@intel.com> Reviewed-by:
-
Madhav Chauhan authored
To save power, unused lanes should be powered down using the bitfield of PORT_CL_DW10. v2: Review comments from Jani N - Put default label next to case 4 - Include the shifts in the macros Signed-off-by: -
Madhav Chauhan authored
This register used to power down individual lanes for DDI/DSI ports. Bitfields to power up/down various combinations of lanes are also added in this patch. v2: Review comments from Jani N - Use override instead of "override" for bitfields - Define mask for override bitfield - Define PWR_DOWN_LN* macros shifted in place v3: Correct PWR_DOWN_LN_MASK value (Jani N) Signed-off-by: -
Madhav Chauhan authored
This patch configures mode of operation for DSI and enable DDI IO power by configuring power well. v2: Use for_each_dsi_port() for power get (Jani N) Signed-off-by:
-
Madhav Chauhan authored
This patch defines DSI IO mode control register and it's bits used while enabling IO power for DSI. Signed-off-by:
-
Madhav Chauhan authored
Escape Clock is used for LP communication across the DSI Link. To achieve the constant frequency of the escape clock from the variable DPLL frequency output, a variable divider(M) is needed. This patch programs the same. v2: (Jani N) Don't end line with "(". Signed-off-by: -
Jani Nikula authored
Use the more customary order of latest platform first, and don't bother with an if in the last branch. Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Avoid confusion with the functions to be added for the new ICL or gen 11 DSI implementation by renaming the current DSI functions. While at it, permutate the words in the function names to make them all start with "vlv_dsi" or "vlv_dsi_pll" etc. Reduce the platform abstractions in the PLL file while at it, moving the checks to vlv_dsi.c instead, where we typically already have the necessary if ladders. Leave the static functions as-is for now; they could be renamed later if needed. No functional changes. v2: use "gen7" prefix. v3: use "vlv" and "bxt" prefixes, reduce the abstractions. References: https://patchwork.freedesktop.org/series/44823/ Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
