- 30 May, 2013 12 commits
-
-
Manjunath Goudar authored
Note that this changes is part of separating the ohci pci host controller driver from ohci-hcd host code. This contains : -Moved sb800_prefetch() function from ohci-pci.c to pci-quirks.c file and EXPORTed, this is part of the effort to move the ohci pci related code to generic pci code. -Passed "device" argument instead of "ohci_hcd" in sb800_prefetch() function to avoid extra include file in pci-quirks.c. V2: -Passed "device" argment instead of "pci_dev", then we use to_pci_dev() to get the "pci_dev" structure. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Manjunath Goudar authored
This patch prepares ohci-hcd for being split up into a core library and separate platform driver modules. A generic ohci_hc_driver structure is created, containing all the "standard" values, and a new mechanism is added whereby a driver module can specify a set of overrides to those values. In addition the ohci_restart(),ohci_suspend() and ohci_resume() routines need to be EXPORTed for use by the drivers. Added ohci_setip(() and ohci_start() routine for to start the generic controller rather than each having its own idiosyncratic approach. This allow to clean duplicated code in most of SOC driver In V2: -ohci_hcd_init() ohci_run() and ohci_stop() are not made non-static. -Adds the ohci_setup() and ohci_start() routine. In V3: -purpose of ohci_setup() and ohci_start() function description written in the patch description. -ohci_init() are not made non-static but now called beginning of the ohci_restart(). -ohci_run() signature change reverted back. -unrelated changes removed. -duplicate comment line removed. -inline ohci_suspend() and ohci_resume() is not needed so removed from ohci.h file. In V4: -ohci-init() EXPORTed because it is called by all bus glue modules. -ohci-setup() removed from 1/2 added into 2/2 patch. In V5: -Again ohci_setup() is added and EXPORTed because to replace the ohci_init() from all bus glues. -ohci_init() is not made non-static function. In V6: -ohci_init() call is removed from ohci_quirk_nec_worker(), because it is already called in ohci_restart(). In V8: -ohci_hcd_init() is called by ohci_setup() to make generic ohci initialization in all ohci drivers. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
This patch attempts to fix the isochronous API in the fhci-hcd driver. There are two problems with the current code: ed->last_iso is used but not set anywhere. The patch changes its name to ed->next_iso and uses it to store the frame number of the next available slot in the isochronous stream. urb->start_frame isn't set when the URB_ISO_ASAP flag is off. The patch sets it to the next available slot if the stream is in use, or the current frame otherwise. This won't give the right behavior when an underrun occurs, but I don't know enough about the driver to handle that case. Unfortunately, I don't have any way to test these changes. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Anton Vorontsov <avorontsov@ru.mvista.com> CC: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
This patch attempts to update the imx21-hcd driver to the current standard for the isochronous API. Firstly, urb->start_frame should always be set by the driver; it is not an input parameter. Secondly, the URB_ISO_ASAP flag matters only when an URB is submitted to a stream that has gotten an underrun. It causes the URB to be scheduled for the next available slot in the future, rather than the earliest unused (and expired) slot. Unfortunately, I don't have any way to test these changes. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Sascha Hauer <kernel@pengutronix.de> CC: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
This patch attempts to fix the isochonour API in the musb host driver. In particular, the urb->start_frame field should always be set by the driver; it isn't an input parameter. The simplest way to accomplish this is to treat all URBs as though the URB_ISO_ASAP flag was set. This won't give the right behavior when an underrun occurs, but I don't know enough about the musb driver to handle that case. Unfortunately, I have no way to test this change. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Abraham authored
Exynos5440 does not require any explict USB phy configuration. So skip the USB phy configuration for Exynos5440 based platforms. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Ackked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Shevchenko authored
There is a specifier we may use to dump small buffers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Also, unnecessary dev_set_drvdata() is removed, because the driver core clears the driver data to NULL after device_release or on probe failure. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sachin Kamat authored
'hcd' can never be NULL and the spear_ehci_hcd_drv_remove routine will never be called in_interrupt. Hence remove these checks. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
When converting this driver to devm_ioremap_resource, the removal of this now unneeded function has been forgotten. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dongjin Kim authored
This patch is to add a property 'disabled-ports' representing the unused port of USB3503. USB3503 can support up to 3 USB host port and each ports can be controlled to be enabled or disabled. Do not describe this property if all ports must be enabled. You can represent the ports to disable in the device tree. usb3503@08{ ... disabled-ports = <2 3>; ... }; Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dongjin Kim authored
This patch is to disable the USB ports unconnected to USB3503. In order to disable the port, 'port_off_mask' must be set. * Disable PORT1 only .port_off_mask = USB3503_OFF_PORT1; * Disable PORT1 and PORT3 only .port_off_mask = USB3503_OFF_PORT1 | USB3503_OFF_PORT3; * Enables all ports .port_off_mask = 0; Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 27 May, 2013 1 commit
-
-
Greg Kroah-Hartman authored
We want these fixes. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 26 May, 2013 9 commits
-
-
Linus Torvalds authored
-
Manfred Spraul authored
do_smart_update_queue() is called when an operation (semop, semctl(SETVAL), semctl(SETALL), ...) modified the array. It must check which of the sleeping tasks can proceed. do_smart_update_queue() missed a few wakeups: - if a sleeping complex op was completed, then all per-semaphore queues must be scanned - not only those that were modified by *sops - if a sleeping simple op proceeded, then the global queue must be scanned again And: - the test for "|sops == NULL) before scanning the global queue is not required: If the global queue is empty, then it doesn't need to be scanned - regardless of the reason for calling do_smart_update_queue() The patch is not optimized, i.e. even completing a wait-for-zero operation causes a rescan. This is done to keep the patch as simple as possible. Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Rik van Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: - Stable fix to prevent an rpc_task wakeup race - Fix a NFSv4.1 session drain deadlock - Fix a NFSv4/v4.1 mount regression when not running rpc.gssd - Ensure auth_gss pipe detection works in namespaces - Fix SETCLIENTID fallback if rpcsec_gss is not available * tag 'nfs-for-3.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Fix SETCLIENTID fallback if GSS is not available SUNRPC: Prevent an rpc_task wakeup race NFSv4.1 Fix a pNFS session draining deadlock SUNRPC: Convert auth_gss pipe detection to work in namespaces SUNRPC: Faster detection if gssd is actually running SUNRPC: Fix a bug in gss_create_upcall
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds authored
Pull amd64 edac fix from Borislav Petkov: "A sysfs file permissions correction" * tag 'edac_fixes_for_3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Fix bogus sysfs file permissions
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: "This time we made the kernel- and interruption stack allocation reentrant which fixed some strange kernel crashes (specifically protection ID traps). Furthemore this patchset fixes the interrupt stack in UP and SMP configurations by using native locking instructions. And finally usage of floating point calculations on parisc were disabled in the MPILIB." * 'parisc-for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: fix irq stack on UP and SMP parisc/superio: Use module_pci_driver to register driver parisc: make interrupt and interruption stack allocation reentrant parisc: show number of FPE and unaligned access handler calls in /proc/interrupts parisc: add additional parisc git tree to MAINTAINERS file parisc: use PAGE_SHIFT instead of hardcoded value 12 in pacache.S parisc: add rp5470 entry to machine database MPILIB: disable usage of floating point registers on parisc
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
Pull xfs fixes from Ben Myers: "Here are fixes for corruption on 512 byte filesystems, a rounding error, a use-after-free, some flags to fix lockdep reports, and several fixes related to CRCs. We have a somewhat larger post -rc1 queue than usual due to fixes related to the CRC feature we merged for 3.10: - Fix for corruption with FSX on 512 byte blocksize filesystems - Fix rounding error in xfs_free_file_space - Fix use-after-free with extent free intents - Add several missing KM_NOFS flags to fix lockdep reports - Several fixes for CRC related code" * tag 'for-linus-v3.10-rc3' of git://oss.sgi.com/xfs/xfs: xfs: remote attribute lookups require the value length xfs: xfs_attr_shortform_allfit() does not handle attr3 format. xfs: xfs_da3_node_read_verify() doesn't handle XFS_ATTR3_LEAF_MAGIC xfs: fix missing KM_NOFS tags to keep lockdep happy xfs: Don't reference the EFI after it is freed xfs: fix rounding in xfs_free_file_space xfs: fix sub-page blocksize data integrity writes
-
git://git.infradead.org/battery-2.6Linus Torvalds authored
Pull bettery fixes from Anton Vorontsov: "Last minute one-liners: wrong kfree usage fix, module alias fixup and kconfig adjustments" * tag 'for-v3.10-fixes' of git://git.infradead.org/battery-2.6: pm2301_charger: Fix module alias prefix wm831x_backup: Fix wrong kfree call for devdata->backup.name bq27x00: Fix I2C dependency in KConfig lp8788-charger: Fix kconfig dependency
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management and ACPI fixes from Rafael Wysocki: - Additional CPU ID for the intel_pstate driver from Dirk Brandewie. - More cpufreq fixes related to ARM big.LITTLE support and locking from Viresh Kumar. - VIA C7 cpufreq build fix from Rafał Bilski. - ACPI power management fix making it possible to use device power states regardless of the CONFIG_PM setting from Rafael J Wysocki. - New ACPI video blacklist item from Bastian Triller. * tag 'pm+acpi-3.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / video: Add "Asus UL30A" to ACPI video detect blacklist cpufreq: arm_big_little_dt: Instantiate as platform_driver cpufreq: arm_big_little_dt: Register driver only if DT has valid data cpufreq / e_powersaver: Fix linker error when ACPI processor is a module cpufreq / intel_pstate: Add additional supported CPU ID cpufreq: Drop rwsem lock around CPUFREQ_GOV_POLICY_EXIT ACPI / PM: Allow device power states to be used for CONFIG_PM unset
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull slave-dma fixes from Vinod Koul: "We have two patches from Andy & Rafael fixing the Lynxpoint dma" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: ACPI / LPSS: register clock device for Lynxpoint DMA properly dma: acpi-dma: parse CSRT to extract additional resources
-
- 25 May, 2013 5 commits
-
-
Kyle McMartin authored
kcore_vmalloc is in fs/proc/kcore.c and kcore_mem is unused across the tree. Noticed while grepping the tree for some other kcore stuff. (score looks pretty unmaintained to me.) Signed-off-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC fixes from Vineet Gupta: - Fallouts/wreckage of Cache Flush optimizations / aliasing dcache support - Fix for an interesting bug where piped input to grep was getting mysteriously clobbered * tag 'arc-v3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: lazy dcache flush broke gdb in non-aliasing configs ARC: Use enough bits for determining page's cache color ARC: Brown paper bag bug in macro for checking cache color ARC: copy_(to|from)_user() to honor usermode-access permissions ARC: [mm] Prevent stray dcache lines after__sync_icache_dcach() ARC: [TB10x] Remove redundant abilis,simple-pinctrl mechanism
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Just three this time, all really quite small" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7729/1: vfp: ensure VFP_arch is non-zero when VFP is not supported ARM: 7727/1: remove the .vm_mm value from gate_vma ARM: 7723/1: crypto: sha1-armv4-large.S: fix SP handling
-
Vineet Gupta authored
gdbserver inserting a breakpoint ends up calling copy_user_page() for a code page. The generic version of which (non-aliasing config) didn't set the PG_arch_1 bit hence update_mmu_cache() didn't sync dcache/icache for corresponding dynamic loader code page - causing garbade to be executed. So now aliasing versions of copy_user_highpage()/clear_page() are made default. There is no significant overhead since all of special alias handling code is compiled out for non-aliasing build Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-
Linus Torvalds authored
Merge fixes from Andrew Morton: "A bunch of fixes and one simple fbdev driver which missed the merge window because people will still talking about it (to no great effect)." * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (30 commits) aio: fix kioctx not being freed after cancellation at exit time mm/pagewalk.c: walk_page_range should avoid VM_PFNMAP areas drivers/rtc/rtc-max8998.c: check for pdata presence before dereferencing ocfs2: goto out_unlock if ocfs2_get_clusters_nocache() failed in ocfs2_fiemap() random: fix accounting race condition with lockless irq entropy_count update drivers/char/random.c: fix priming of last_data mm/memory_hotplug.c: fix printk format warnings nilfs2: fix issue of nilfs_set_page_dirty() for page at EOF boundary drivers/block/brd.c: fix brd_lookup_page() race fbdev: FB_GOLDFISH should depend on HAS_DMA drivers/rtc/rtc-pl031.c: pass correct pointer to free_irq() auditfilter.c: fix kernel-doc warnings aio: fix io_getevents documentation revert "selftest: add simple test for soft-dirty bit" drivers/leds/leds-ot200.c: fix error caused by shifted mask mm/THP: use pmd_populate() to update the pmd with pgtable_t pointer linux/kernel.h: fix kernel-doc warning mm compaction: fix of improper cache flush in migration code rapidio/tsi721: fix bug in MSI interrupt handling hfs: avoid crash in hfs_bnode_create ...
-
- 24 May, 2013 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "We didn't have any fixes sent up for -rc2, so this is a slightly larger batch. A bit all over the place platform-wise; OMAP, at91, marvell, renesas, sunxi, ux500, etc. I tried to summarize highlights but there isn't a whole lot to point out. Lots of little things fixed all over. A couple of defconfig updates due to new/changing options." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) ARM: at91/sama5: fix incorrect PMC pcr div definition ARM: at91/dt: fix macb pinctrl_macb_rmii_mii_alt definition ARM: at91: at91sam9n12: move external irq declatation to DT ARM: shmobile: marzen: Use error values in usb_power_* ARM: tegra: defconfig fixes ARM: nomadik: fix IRQ assignment for SMC ethernet ARM: vt8500: Add missing NULL terminator in dt_compat clk: tegra: add ac97 controller clock clk: tegra: remove USB from clk init table ARM: dts: mvebu: Fix wrong the address reg value for the L2-cache node ARM: plat-orion: Fix num_resources and id for ge10 and ge11 ARM: OMAP2+: hwmod: Remove sysc slave idle and auto idle apis SERIAL: OMAP: Remove the slave idle handling from the driver ARM: OMAP2+: serial: Remove the un-used slave idle hooks ARM: OMAP2+: hwmod-data: UART IP needs software control to manage sidle modes ARM: OMAP2+: hwmod: Add a new flag to handle SIDLE in SWSUP only in active ARM: OMAP2+: hwmod: Fix sidle programming in _enable_sysc()/_idle_sysc() arm: mvebu: fix the 'ranges' property to handle PCIe ARM: mvebu: select ARCH_REQUIRE_GPIOLIB for mvebu platform ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock ...
-
Benjamin LaHaise authored
The recent changes overhauling fs/aio.c introduced a bug that results in the kioctx not being freed when outstanding kiocbs are cancelled at exit_aio() time. Specifically, a kiocb that is cancelled has its completion events discarded by batch_complete_aio(), which then fails to wake up the process stuck in free_ioctx(). Fix this by modifying the wait_event() condition in free_ioctx() appropriately. This patch was tested with the cancel operation in the thread based code posted yesterday. [akpm@linux-foundation.org: fix build] Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Zach Brown <zab@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Cliff Wickman authored
A panic can be caused by simply cat'ing /proc/<pid>/smaps while an application has a VM_PFNMAP range. It happened in-house when a benchmarker was trying to decipher the memory layout of his program. /proc/<pid>/smaps and similar walks through a user page table should not be looking at VM_PFNMAP areas. Certain tests in walk_page_range() (specifically split_huge_page_pmd()) assume that all the mapped PFN's are backed with page structures. And this is not usually true for VM_PFNMAP areas. This can result in panics on kernel page faults when attempting to address those page structures. There are a half dozen callers of walk_page_range() that walk through a task's entire page table (as N. Horiguchi pointed out). So rather than change all of them, this patch changes just walk_page_range() to ignore VM_PFNMAP areas. The logic of hugetlb_vma() is moved back into walk_page_range(), as we want to test any vma in the range. VM_PFNMAP areas are used by: - graphics memory manager gpu/drm/drm_gem.c - global reference unit sgi-gru/grufile.c - sgi special memory char/mspec.c - and probably several out-of-tree modules [akpm@linux-foundation.org: remove now-unused hugetlb_vma() stub] Signed-off-by: Cliff Wickman <cpw@sgi.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Sterba <dsterba@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Tomasz Figa authored
Currently the driver can crash with a NULL pointer dereference if no pdata is provided, despite of successful registration of the MFD part. This patch fixes the problem by adding a NULL check before dereferencing the pdata pointer. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Joseph Qi authored
Last time we found there is lock/unlock bug in ocfs2_file_aio_write, and then we did a thorough search for all lock resources in ocfs2_inode_info, including rw, inode and open lockres and found this bug. My kernel version is 3.0.13, and it is also in the lastest version 3.9. In ocfs2_fiemap, once ocfs2_get_clusters_nocache failed, it should goto out_unlock instead of out, because we need release buffer head, up read alloc sem and unlock inode. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Acked-by: Sunil Mushran <sunil.mushran@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jiri Kosina authored
Commit 902c098a ("random: use lockless techniques in the interrupt path") turned IRQ path from being spinlock protected into lockless cmpxchg-retry update. That commit removed r->lock serialization between crediting entropy bits from IRQ context and accounting when extracting entropy on userspace read path, but didn't turn the r->entropy_count reads/updates in account() to use cmpxchg as well. It has been observed, that under certain circumstances this leads to read() on /dev/urandom to return 0 (EOF), as r->entropy_count gets corrupted and becomes negative, which in turn results in propagating 0 all the way from account() to the actual read() call. Convert the accounting code to be the proper lockless counterpart of what has been partially done by 902c098a. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Greg KH <greg@kroah.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jarod Wilson authored
Commit ec8f02da ("random: prime last_data value per fips requirements") added priming of last_data per fips requirements. Unfortuantely, it did so in a way that can lead to multiple threads all incrementing nbytes, but only one actually doing anything with the extra data, which leads to some fun random corruption and panics. The fix is to simply do everything needed to prime last_data in a single shot, so there's no window for multiple cpus to increment nbytes -- in fact, we won't even increment or decrement nbytes anymore, we'll just extract the needed EXTRACT_SIZE one time per pool and then carry on with the normal routine. All these changes have been tested across multiple hosts and architectures where panics were previously encoutered. The code changes are are strictly limited to areas only touched when when booted in fips mode. This change should also go into 3.8-stable, to make the myriads of fips users on 3.8.x happy. Signed-off-by: Jarod Wilson <jarod@redhat.com> Tested-by: Jan Stancek <jstancek@redhat.com> Tested-by: Jan Stodola <jstodola@redhat.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Matt Mackall <mpm@selenic.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Fix printk format warnings in mm/memory_hotplug.c by using "%pa": mm/memory_hotplug.c: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 2 has type 'resource_size_t' [-Wformat] mm/memory_hotplug.c: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'resource_size_t' [-Wformat] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ryusuke Konishi authored
nilfs2: fix issue of nilfs_set_page_dirty for page at EOF boundary DESCRIPTION: There are use-cases when NILFS2 file system (formatted with block size lesser than 4 KB) can be remounted in RO mode because of encountering of "broken bmap" issue. The issue was reported by Anthony Doggett <Anthony2486@interfaces.org.uk>: "The machine I've been trialling nilfs on is running Debian Testing, Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2), but I've also reproduced it (identically) with Debian Unstable amd64 and Debian Experimental (using the 3.8-trunk kernel). The problematic partitions were formatted with "mkfs.nilfs2 -b 1024 -B 8192"." SYMPTOMS: (1) System log contains error messages likewise: [63102.496756] nilfs_direct_assign: invalid pointer: 0 [63102.496786] NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28) [63102.496798] [63102.524403] Remounting filesystem read-only (2) The NILFS2 file system is remounted in RO mode. REPRODUSING PATH: (1) Create volume group with name "unencrypted" by means of vgcreate utility. (2) Run script (prepared by Anthony Doggett <Anthony2486@interfaces.org.uk>): ----------------[BEGIN SCRIPT]-------------------- VG=unencrypted lvcreate --size 2G --name ntest $VG mkfs.nilfs2 -b 1024 -B 8192 /dev/mapper/$VG-ntest mkdir /var/tmp/n mkdir /var/tmp/n/ntest mount /dev/mapper/$VG-ntest /var/tmp/n/ntest mkdir /var/tmp/n/ntest/thedir cd /var/tmp/n/ntest/thedir sleep 2 date darcs init sleep 2 dmesg|tail -n 5 date darcs whatsnew || true date sleep 2 dmesg|tail -n 5 ----------------[END SCRIPT]-------------------- REPRODUCIBILITY: 100% INVESTIGATION: As it was discovered, the issue takes place during segment construction after executing such sequence of user-space operations: open("_darcs/index", O_RDWR|O_CREAT|O_NOCTTY, 0666) = 7 fstat(7, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0 ftruncate(7, 60) The error message "NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28)" takes place because of trying to get block number for third block of the file with logical offset #3072 bytes. As it is possible to see from above output, the file has 60 bytes of the whole size. So, it is enough one block (1 KB in size) allocation for the whole file. Trying to operate with several blocks instead of one takes place because of discovering several dirty buffers for this file in nilfs_segctor_scan_file() method. The root cause of this issue is in nilfs_set_page_dirty function which is called just before writing to an mmapped page. When nilfs_page_mkwrite function handles a page at EOF boundary, it fills hole blocks only inside EOF through __block_page_mkwrite(). The __block_page_mkwrite() function calls set_page_dirty() after filling hole blocks, thus nilfs_set_page_dirty function (= a_ops->set_page_dirty) is called. However, the current implementation of nilfs_set_page_dirty() wrongly marks all buffers dirty even for page at EOF boundary. As a result, buffers outside EOF are inconsistently marked dirty and queued for write even though they are not mapped with nilfs_get_block function. FIX: This modifies nilfs_set_page_dirty() not to mark hole blocks dirty. Thanks to Vyacheslav Dubeyko for his effort on analysis and proposals for this issue. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Reported-by: Anthony Doggett <Anthony2486@interfaces.org.uk> Reported-by: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Brian Behlendorf authored
The index on the page must be set before it is inserted in the radix tree. Otherwise there is a small race which can occur during lookup where the page can be found with the incorrect index. This will trigger the BUG_ON() in brd_lookup_page(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Reported-by: Chris Wedgwood <cw@f00f.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
If NO_DMA=y: drivers/built-in.o: In function `goldfish_fb_remove': drivers/video/goldfishfb.c:301: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `goldfish_fb_probe': drivers/video/goldfishfb.c:247: undefined reference to `dma_alloc_coherent' drivers/video/goldfishfb.c:280: undefined reference to `dma_free_coherent' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Lars-Peter Clausen authored
free_irq() expects the same pointer that was passed to request_irq(), otherwise the IRQ is not freed. The issue was found using the following coccinelle script: <smpl> @r1@ type T; T devid; @@ request_irq(..., devid) @r2@ type r1.T; T devid; position p; @@ free_irq@p(..., devid) @@ position p != r2.p; @@ *free_irq@p(...) </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Fix kernel-doc warnings in kernel/auditfilter.c: Warning(kernel/auditfilter.c:1029): Excess function parameter 'loginuid' description in 'audit_receive_filter' Warning(kernel/auditfilter.c:1029): Excess function parameter 'sessionid' description in 'audit_receive_filter' Warning(kernel/auditfilter.c:1029): Excess function parameter 'sid' description in 'audit_receive_filter' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-