- 03 Mar, 2016 40 commits
-
-
Thomas Gleixner authored
commit 9ac15b7a upstream. In the case that the new vector mask is a subset of the existing mask there is no point to do a AND operation of currentmask & newmask. The result is newmask. So we can simply copy the new mask to the current mask and be done with it. Preparatory patch for further consolidation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160106.640253454@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit 3716fd27 upstream. __assign_irq_vector() uses the vector_cpumask which is assigned by apic->vector_allocation_domain() without doing basic sanity checks. That can result in a situation where the final assignement of a newly found vector fails in apic->cpu_mask_to_apicid_and(). So we have to do rollbacks for no reason. apic->cpu_mask_to_apicid_and() only fails if vector_cpumask & requested_cpumask & cpu_online_mask is empty. Check for this condition right away and if the result is empty try immediately the next possible cpu in the requested mask. So in case of a failure the old setting is unchanged and we can remove the rollback code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160106.561877324@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit 95ffeb4b upstream. Split out the code which advances the target cpu for the search so we can reuse it for the next patch which adds an early validation check for the vectormask which we get from the apic. Add comments while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160106.484562040@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit 433cbd57 upstream. Use an explicit goto for the cases where we have success in the search/update and return -ENOSPC if the search loop ends due to no space. Preparatory patch for fixes. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160106.403491024@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiang Liu authored
commit 8a580f70 upstream. Function __assign_irq_vector() makes use of apic_chip_data.old_domain as a temporary buffer, which is in the way of using apic_chip_data.old_domain for synchronizing the vector cleanup with the vector assignement code. Use a proper temporary cpumask for this. [ tglx: Renamed the mask to searched_cpumask for clarity ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/1450880014-11741-1-git-send-email-jiang.liu@linux.intel.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit 36f34c8c upstream. In fixup_irqs() we unconditionally dereference the irq chip of an irq descriptor. The descriptor might still be valid, but already cleaned up, i.e. the chip removed. Add a check for this condition. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160106.236423282@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiang Liu authored
commit 111abeba upstream. There's a race condition between x86_vector_free_irqs() { free_apic_chip_data(irq_data->chip_data); xxxxx //irq_data->chip_data has been freed, but the pointer //hasn't been reset yet irq_domain_reset_irq_data(irq_data); } and smp_irq_move_cleanup_interrupt() { raw_spin_lock(&vector_lock); data = apic_chip_data(irq_desc_get_irq_data(desc)); access data->xxxx // may access freed memory raw_spin_unlock(&desc->lock); } which may cause smp_irq_move_cleanup_interrupt() to access freed memory. Call irq_domain_reset_irq_data(), which clears the pointer with vector lock held. [ tglx: Free memory outside of lock held region. ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/1450880014-11741-3-git-send-email-jiang.liu@linux.intel.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit e23b257c upstream. setup_ioapic_dest() calls irqchip->irq_set_affinity() completely unprotected. That's wrong in several aspects: - it opens a race window where irq_set_affinity() can be interrupted and the irq chip left in unconsistent state. - it triggers a lockdep splat when we fix the vector race for 4.3+ because vector lock is taken with interrupts enabled. The proper calling convention is irq descriptor lock held and interrupts disabled. Reported-and-tested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Cc: Joe Lawrence <joe.lawrence@stratus.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1601140919420.3575@nanosSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Lutomirski authored
commit 3d44d51b upstream. This doesn't seem to fix a regression -- I don't think the CLAC was ever there. I double-checked in a debugger: entries through the int80 gate do not automatically clear AC. Stable maintainers: I can provide a backport to 4.3 and earlier if needed. This needs to be backported all the way to 3.10. Reported-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 63bcff2a ("x86, smap: Add STAC and CLAC instructions to control user space access") Link: http://lkml.kernel.org/r/b02b7e71ae54074be01fc171cbd4b72517055c0e.1456345086.git.luto@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Colin Ian King authored
commit 9bf148cb upstream. In the unlikely event that regno == nr_registers then we get an array overrun on regoff because the invalid register check is currently off-by-one. Fix this with a check that regno is >= nr_registers instead. Detected with static analysis using CoverityScan. Fixes: fcc7ffd6 "x86, mpx: Decode MPX instruction to get bound violation information" Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Link: http://lkml.kernel.org/r/1456512931-3388-1-git-send-email-colin.king@canonical.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mikulas Patocka authored
commit b6853f78 upstream. The delete opration can allocate additional space on the HPFS filesystem due to btree split. The HPFS driver checks in advance if there is available space, so that it won't corrupt the btree if we run out of space during splitting. If there is not enough available space, the HPFS driver attempted to truncate the file, but this results in a deadlock since the commit 7dd29d8d ("HPFS: Introduce a global mutex and lock it on every callback from VFS"). This patch removes the code that tries to truncate the file and -ENOSPC is returned instead. If the user hits -ENOSPC on delete, he should try to delete other files (that are stored in a leaf btree node), so that the delete operation will make some space for deleting the file stored in non-leaf btree node. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Al Viro authored
commit 5129fa48 upstream. ... or we risk seeing a bogus value of d_is_symlink() there. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Al Viro authored
commit a7f77542 upstream. ... otherwise d_is_symlink() above might have nothing to do with the inode value we've got. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Konrad Rzeszutek Wilk authored
commit 4d8c8bd6 upstream. Occasionaly PV guests would crash with: pciback 0000:00:00.1: Xen PCI mapped GSI0 to IRQ16 BUG: unable to handle kernel paging request at 0000000d1a8c0be0 .. snip.. <ffffffff8139ce1b>] find_next_bit+0xb/0x10 [<ffffffff81387f22>] cpumask_next_and+0x22/0x40 [<ffffffff813c1ef8>] pci_device_probe+0xb8/0x120 [<ffffffff81529097>] ? driver_sysfs_add+0x77/0xa0 [<ffffffff815293e4>] driver_probe_device+0x1a4/0x2d0 [<ffffffff813c1ddd>] ? pci_match_device+0xdd/0x110 [<ffffffff81529657>] __device_attach_driver+0xa7/0xb0 [<ffffffff815295b0>] ? __driver_attach+0xa0/0xa0 [<ffffffff81527622>] bus_for_each_drv+0x62/0x90 [<ffffffff8152978d>] __device_attach+0xbd/0x110 [<ffffffff815297fb>] device_attach+0xb/0x10 [<ffffffff813b75ac>] pci_bus_add_device+0x3c/0x70 [<ffffffff813b7618>] pci_bus_add_devices+0x38/0x80 [<ffffffff813dc34e>] pcifront_scan_root+0x13e/0x1a0 [<ffffffff817a0692>] pcifront_backend_changed+0x262/0x60b [<ffffffff814644c6>] ? xenbus_gather+0xd6/0x160 [<ffffffff8120900f>] ? put_object+0x2f/0x50 [<ffffffff81465c1d>] xenbus_otherend_changed+0x9d/0xa0 [<ffffffff814678ee>] backend_changed+0xe/0x10 [<ffffffff81463a28>] xenwatch_thread+0xc8/0x190 [<ffffffff810f22f0>] ? woken_wake_function+0x10/0x10 which was the result of two things: When we call pci_scan_root_bus we would pass in 'sd' (sysdata) pointer which was an 'pcifront_sd' structure. However in the pci_device_add it expects that the 'sd' is 'struct sysdata' and sets the dev->node to what is in sd->node (offset 4): set_dev_node(&dev->dev, pcibus_to_node(bus)); __pcibus_to_node(const struct pci_bus *bus) { const struct pci_sysdata *sd = bus->sysdata; return sd->node; } However our structure was pcifront_sd which had nothing at that offset: struct pcifront_sd { int domain; /* 0 4 */ /* XXX 4 bytes hole, try to pack */ struct pcifront_device * pdev; /* 8 8 */ } That is an hole - filled with garbage as we used kmalloc instead of kzalloc (the second problem). This patch fixes the issue by: 1) Use kzalloc to initialize to a well known state. 2) Put 'struct pci_sysdata' at the start of 'pcifront_sd'. That way access to the 'node' will access the right offset. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Konrad Rzeszutek Wilk authored
commit d159457b upstream. Commit 8135cf8b (xen/pciback: Save xen_pci_op commands before processing it) broke enabling MSI-X because it would never copy the resulting vectors into the response. The number of vectors requested was being overwritten by the return value (typically zero for success). Save the number of vectors before processing the op, so the correct number of vectors are copied afterwards. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Konrad Rzeszutek Wilk authored
commit 8d47065f upstream. Commit 408fb0e5 (xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set) prevented enabling MSI-X on passed-through virtual functions, because it checked the VF for PCI_COMMAND_MEMORY but this is not a valid bit for VFs. Instead, check the physical function for PCI_COMMAND_MEMORY. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Juergen Gross authored
commit f285aa8d upstream. When adding a new frontend to xen-scsiback don't decrement the number of active frontends in case of no error. Doing so results in a failure when trying to remove the xen-pvscsi nexus even if no domain is using it. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Campbell authored
commit 52ba0746 upstream. Currently xen_dma_map_page concludes that DMA to anything other than the head page of a compound page must be foreign, since the PFN of the page is that of the head. Fix the check to instead consider the whole of a compound page to be local if the PFN of the head passes the 1:1 check. We can never see a compound page which is a mixture of foreign and local sub-pages. The comment already correctly described the intention, but fixup the spelling and some grammar. This fixes the various SSH protocol errors which we have been seeing on the cubietrucks in our automated test infrastructure. This has been broken since commit 3567258d ("xen/arm: use hypercall to flush caches in map_page"), which was in v3.19-rc1. NB arch/arm64/.../xen/page-coherent.h also includes this file. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: xen-devel@lists.xenproject.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ludovic Desroches authored
commit 5e45a258 upstream. PIN_PA15 macro has the same value as PIN_PA14 so we were overriding PA14 mux/configuration. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Reported-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Fixes: 7f16cb67 ("ARM: at91/dt: add sama5d2 pinmux") Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ivaylo Dimitrov authored
commit 3f315c5b upstream. Commit e7b11dc7 ("ARM: OMAP2+: Fix onenand rate detection to avoid filesystem corruption") partially fixed onenand configuration when GPMC module is reset. Finish the job by also providing the correct values in ONENAND_REG_SYS_CFG1 register. Fixes: e7b11dc7 ("ARM: OMAP2+: Fix onenand rate detection to avoid filesystem corruption") Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Al Viro authored
commit c80567c8 upstream. ... into returning a positive to path_openat(), which would interpret that as "symlink had been encountered" and proceed to corrupt memory, etc. It can only happen due to a bug in some ->open() instance or in some LSM hook, etc., so we report any such event *and* make sure it doesn't trick us into further unpleasantness. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Simon Guinot authored
commit 59ceeaaf upstream. In __request_region, if a conflict with a BUSY and MUXED resource is detected, then the caller goes to sleep and waits for the resource to be released. A pointer on the conflicting resource is kept. At wake-up this pointer is used as a parent to retry to request the region. A first problem is that this pointer might well be invalid (if for example the conflicting resource have already been freed). Another problem is that the next call to __request_region() fails to detect a remaining conflict. The previously conflicting resource is passed as a parameter and __request_region() will look for a conflict among the children of this resource and not at the resource itself. It is likely to succeed anyway, even if there is still a conflict. Instead, the parent of the conflicting resource should be passed to __request_region(). As a fix, this patch doesn't update the parent resource pointer in the case we have to wait for a muxed region right after. Reported-and-tested-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Tested-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Hajnoczi authored
commit b7052cd7 upstream. The qword_get() function NUL-terminates its output buffer. If the input string is in hex format \xXXXX... and the same length as the output buffer, there is an off-by-one: int qword_get(char **bpp, char *dest, int bufsize) { ... while (len < bufsize) { ... *dest++ = (h << 4) | l; len++; } ... *dest = '\0'; return len; } This patch ensures the NUL terminator doesn't fall outside the output buffer. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt (Red Hat) authored
commit d045437a upstream. The ftrace:function event is only displayed for parsing the function tracer data. It is not used to enable function tracing, and does not include an "enable" file in its event directory. Originally, this event was kept separate from other events because it did not have a ->reg parameter. But perf added a "reg" parameter for its use which caused issues, because it made the event available to functions where it was not compatible for. Commit 9b63776f "tracing: Do not enable function event with enable" added a TRACE_EVENT_FL_IGNORE_ENABLE flag that prevented the function event from being enabled by normal trace events. But this commit missed keeping the function event from being displayed by the "available_events" directory, which is used to show what events can be enabled by set_event. One documented way to enable all events is to: cat available_events > set_event But because the function event is displayed in the available_events, this now causes an INVALID error: cat: write error: Invalid argument Reported-by: Chunyu Hu <chuhu@redhat.com> Fixes: 9b63776f "tracing: Do not enable function event with enable" Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gavin Shan authored
commit f6bf0fa1 upstream. During error recovery, the device could be removed as part of the partial hotplug. The criterion used to come with partial hotplug is: if the device driver provides error_detected(), slot_reset() and resume() callbacks, it's immune from hotplug. Otherwise, it's going to experience partial hotplug during EEH recovery. But the criterion isn't correct enough: mlx4_core driver for Mellanox adapters provides error_detected(), slot_reset() callbacks, but resume() isn't there. Those Mellanox adapters won't be to involved in the partial hotplug. This fixes the criterion to a practical one: adpater with driver that provides error_detected(), slot_reset() will be immune from partial hotplug. resume() isn't mandatory. Fixes: f2da4ccf ("powerpc/eeh: More relaxed hotplug criterion") Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Krinkin authored
commit 17e4bce0 upstream. Ubsan reports the following warning due to a typo in update_accessed_dirty_bits template, the patch fixes the typo: [ 168.791851] ================================================================================ [ 168.791862] UBSAN: Undefined behaviour in arch/x86/kvm/paging_tmpl.h:252:15 [ 168.791866] index 4 is out of range for type 'u64 [4]' [ 168.791871] CPU: 0 PID: 2950 Comm: qemu-system-x86 Tainted: G O L 4.5.0-rc5-next-20160222 #7 [ 168.791873] Hardware name: LENOVO 23205NG/23205NG, BIOS G2ET95WW (2.55 ) 07/09/2013 [ 168.791876] 0000000000000000 ffff8801cfcaf208 ffffffff81c9f780 0000000041b58ab3 [ 168.791882] ffffffff82eb2cc1 ffffffff81c9f6b4 ffff8801cfcaf230 ffff8801cfcaf1e0 [ 168.791886] 0000000000000004 0000000000000001 0000000000000000 ffffffffa1981600 [ 168.791891] Call Trace: [ 168.791899] [<ffffffff81c9f780>] dump_stack+0xcc/0x12c [ 168.791904] [<ffffffff81c9f6b4>] ? _atomic_dec_and_lock+0xc4/0xc4 [ 168.791910] [<ffffffff81da9e81>] ubsan_epilogue+0xd/0x8a [ 168.791914] [<ffffffff81daafa2>] __ubsan_handle_out_of_bounds+0x15c/0x1a3 [ 168.791918] [<ffffffff81daae46>] ? __ubsan_handle_shift_out_of_bounds+0x2bd/0x2bd [ 168.791922] [<ffffffff811287ef>] ? get_user_pages_fast+0x2bf/0x360 [ 168.791954] [<ffffffffa1794050>] ? kvm_largepages_enabled+0x30/0x30 [kvm] [ 168.791958] [<ffffffff81128530>] ? __get_user_pages_fast+0x360/0x360 [ 168.791987] [<ffffffffa181b818>] paging64_walk_addr_generic+0x1b28/0x2600 [kvm] [ 168.792014] [<ffffffffa1819cf0>] ? init_kvm_mmu+0x1100/0x1100 [kvm] [ 168.792019] [<ffffffff8129e350>] ? debug_check_no_locks_freed+0x350/0x350 [ 168.792044] [<ffffffffa1819cf0>] ? init_kvm_mmu+0x1100/0x1100 [kvm] [ 168.792076] [<ffffffffa181c36d>] paging64_gva_to_gpa+0x7d/0x110 [kvm] [ 168.792121] [<ffffffffa181c2f0>] ? paging64_walk_addr_generic+0x2600/0x2600 [kvm] [ 168.792130] [<ffffffff812e848b>] ? debug_lockdep_rcu_enabled+0x7b/0x90 [ 168.792178] [<ffffffffa17d9a4a>] emulator_read_write_onepage+0x27a/0x1150 [kvm] [ 168.792208] [<ffffffffa1794d44>] ? __kvm_read_guest_page+0x54/0x70 [kvm] [ 168.792234] [<ffffffffa17d97d0>] ? kvm_task_switch+0x160/0x160 [kvm] [ 168.792238] [<ffffffff812e848b>] ? debug_lockdep_rcu_enabled+0x7b/0x90 [ 168.792263] [<ffffffffa17daa07>] emulator_read_write+0xe7/0x6d0 [kvm] [ 168.792290] [<ffffffffa183b620>] ? em_cr_write+0x230/0x230 [kvm] [ 168.792314] [<ffffffffa17db005>] emulator_write_emulated+0x15/0x20 [kvm] [ 168.792340] [<ffffffffa18465f8>] segmented_write+0xf8/0x130 [kvm] [ 168.792367] [<ffffffffa1846500>] ? em_lgdt+0x20/0x20 [kvm] [ 168.792374] [<ffffffffa14db512>] ? vmx_read_guest_seg_ar+0x42/0x1e0 [kvm_intel] [ 168.792400] [<ffffffffa1846d82>] writeback+0x3f2/0x700 [kvm] [ 168.792424] [<ffffffffa1846990>] ? em_sidt+0xa0/0xa0 [kvm] [ 168.792449] [<ffffffffa185554d>] ? x86_decode_insn+0x1b3d/0x4f70 [kvm] [ 168.792474] [<ffffffffa1859032>] x86_emulate_insn+0x572/0x3010 [kvm] [ 168.792499] [<ffffffffa17e71dd>] x86_emulate_instruction+0x3bd/0x2110 [kvm] [ 168.792524] [<ffffffffa17e6e20>] ? reexecute_instruction.part.110+0x2e0/0x2e0 [kvm] [ 168.792532] [<ffffffffa14e9a81>] handle_ept_misconfig+0x61/0x460 [kvm_intel] [ 168.792539] [<ffffffffa14e9a20>] ? handle_pause+0x450/0x450 [kvm_intel] [ 168.792546] [<ffffffffa15130ea>] vmx_handle_exit+0xd6a/0x1ad0 [kvm_intel] [ 168.792572] [<ffffffffa17f6a6c>] ? kvm_arch_vcpu_ioctl_run+0xbdc/0x6090 [kvm] [ 168.792597] [<ffffffffa17f6bcd>] kvm_arch_vcpu_ioctl_run+0xd3d/0x6090 [kvm] [ 168.792621] [<ffffffffa17f6a6c>] ? kvm_arch_vcpu_ioctl_run+0xbdc/0x6090 [kvm] [ 168.792627] [<ffffffff8293b530>] ? __ww_mutex_lock_interruptible+0x1630/0x1630 [ 168.792651] [<ffffffffa17f5e90>] ? kvm_arch_vcpu_runnable+0x4f0/0x4f0 [kvm] [ 168.792656] [<ffffffff811eeb30>] ? preempt_notifier_unregister+0x190/0x190 [ 168.792681] [<ffffffffa17e0447>] ? kvm_arch_vcpu_load+0x127/0x650 [kvm] [ 168.792704] [<ffffffffa178e9a3>] kvm_vcpu_ioctl+0x553/0xda0 [kvm] [ 168.792727] [<ffffffffa178e450>] ? vcpu_put+0x40/0x40 [kvm] [ 168.792732] [<ffffffff8129e350>] ? debug_check_no_locks_freed+0x350/0x350 [ 168.792735] [<ffffffff82946087>] ? _raw_spin_unlock+0x27/0x40 [ 168.792740] [<ffffffff8163a943>] ? handle_mm_fault+0x1673/0x2e40 [ 168.792744] [<ffffffff8129daa8>] ? trace_hardirqs_on_caller+0x478/0x6c0 [ 168.792747] [<ffffffff8129dcfd>] ? trace_hardirqs_on+0xd/0x10 [ 168.792751] [<ffffffff812e848b>] ? debug_lockdep_rcu_enabled+0x7b/0x90 [ 168.792756] [<ffffffff81725a80>] do_vfs_ioctl+0x1b0/0x12b0 [ 168.792759] [<ffffffff817258d0>] ? ioctl_preallocate+0x210/0x210 [ 168.792763] [<ffffffff8174aef3>] ? __fget+0x273/0x4a0 [ 168.792766] [<ffffffff8174acd0>] ? __fget+0x50/0x4a0 [ 168.792770] [<ffffffff8174b1f6>] ? __fget_light+0x96/0x2b0 [ 168.792773] [<ffffffff81726bf9>] SyS_ioctl+0x79/0x90 [ 168.792777] [<ffffffff82946880>] entry_SYSCALL_64_fastpath+0x23/0xc1 [ 168.792780] ================================================================================ Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Bonzini authored
commit 0c1d77f4 upstream. Commit e8dd2d2d ("Silence compiler warning in arch/x86/kvm/emulate.c", 2015-09-06) broke boot of the Hurd. The bug is that the "default:" case actually could modify "la", but after the patch this change is not reflected in *linear. The bug is visible whenever a non-zero segment base causes the linear address to wrap around the 4GB mark. Fixes: e8dd2d2dReported-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Bonzini authored
commit 172b2386 upstream. Sometimes when setting a breakpoint a process doesn't stop on it. This is because the debug registers are not loaded correctly on VCPU load. The following simple reproducer from Oleg Nesterov tries using debug registers in two threads. To see the bug, run a 2-VCPU guest with "taskset -c 0" and run "./bp 0 1" inside the guest. #include <unistd.h> #include <signal.h> #include <stdlib.h> #include <stdio.h> #include <sys/wait.h> #include <sys/ptrace.h> #include <sys/user.h> #include <asm/debugreg.h> #include <assert.h> #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) unsigned long encode_dr7(int drnum, int enable, unsigned int type, unsigned int len) { unsigned long dr7; dr7 = ((len | type) & 0xf) << (DR_CONTROL_SHIFT + drnum * DR_CONTROL_SIZE); if (enable) dr7 |= (DR_GLOBAL_ENABLE << (drnum * DR_ENABLE_SIZE)); return dr7; } int write_dr(int pid, int dr, unsigned long val) { return ptrace(PTRACE_POKEUSER, pid, offsetof (struct user, u_debugreg[dr]), val); } void set_bp(pid_t pid, void *addr) { unsigned long dr7; assert(write_dr(pid, 0, (long)addr) == 0); dr7 = encode_dr7(0, 1, DR_RW_EXECUTE, DR_LEN_1); assert(write_dr(pid, 7, dr7) == 0); } void *get_rip(int pid) { return (void*)ptrace(PTRACE_PEEKUSER, pid, offsetof(struct user, regs.rip), 0); } void test(int nr) { void *bp_addr = &&label + nr, *bp_hit; int pid; printf("test bp %d\n", nr); assert(nr < 16); // see 16 asm nops below pid = fork(); if (!pid) { assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0); kill(getpid(), SIGSTOP); for (;;) { label: asm ( "nop; nop; nop; nop;" "nop; nop; nop; nop;" "nop; nop; nop; nop;" "nop; nop; nop; nop;" ); } } assert(pid == wait(NULL)); set_bp(pid, bp_addr); for (;;) { assert(ptrace(PTRACE_CONT, pid, 0, 0) == 0); assert(pid == wait(NULL)); bp_hit = get_rip(pid); if (bp_hit != bp_addr) fprintf(stderr, "ERR!! hit wrong bp %ld != %d\n", bp_hit - &&label, nr); } } int main(int argc, const char *argv[]) { while (--argc) { int nr = atoi(*++argv); if (!fork()) test(nr); } while (wait(NULL) > 0) ; return 0; } Suggested-by: Nadav Amit <namit@cs.technion.ac.il> Reported-by: Andrey Wagin <avagin@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark Rutland authored
commit 236cf17c upstream. When we allocate bitmaps in vgic_vcpu_init_maps, we divide the number of bits we need by 8 to figure out how many bytes to allocate. However, bitmap elements are always accessed as unsigned longs, and if we didn't happen to allocate a size such that size % sizeof(unsigned long) == 0, bitmap accesses may go past the end of the allocation. When using KASAN (which does byte-granular access checks), this results in a continuous stream of BUGs whenever these bitmaps are accessed: ============================================================================= BUG kmalloc-128 (Tainted: G B ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in vgic_init.part.25+0x55c/0x990 age=7493 cpu=3 pid=1730 INFO: Slab 0xffffffbde6d5da40 objects=16 used=15 fp=0xffffffc935769700 flags=0x4000000000000080 INFO: Object 0xffffffc935769500 @offset=1280 fp=0x (null) Bytes b4 ffffffc9357694f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769510: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769530: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769540: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769550: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769560: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769570: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Padding ffffffc9357695b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Padding ffffffc9357695c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Padding ffffffc9357695d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Padding ffffffc9357695e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Padding ffffffc9357695f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ CPU: 3 PID: 1740 Comm: kvm-vcpu-0 Tainted: G B 4.4.0+ #17 Hardware name: ARM Juno development board (r1) (DT) Call trace: [<ffffffc00008e770>] dump_backtrace+0x0/0x280 [<ffffffc00008ea04>] show_stack+0x14/0x20 [<ffffffc000726360>] dump_stack+0x100/0x188 [<ffffffc00030d324>] print_trailer+0xfc/0x168 [<ffffffc000312294>] object_err+0x3c/0x50 [<ffffffc0003140fc>] kasan_report_error+0x244/0x558 [<ffffffc000314548>] __asan_report_load8_noabort+0x48/0x50 [<ffffffc000745688>] __bitmap_or+0xc0/0xc8 [<ffffffc0000d9e44>] kvm_vgic_flush_hwstate+0x1bc/0x650 [<ffffffc0000c514c>] kvm_arch_vcpu_ioctl_run+0x2ec/0xa60 [<ffffffc0000b9a6c>] kvm_vcpu_ioctl+0x474/0xa68 [<ffffffc00036b7b0>] do_vfs_ioctl+0x5b8/0xcb0 [<ffffffc00036bf34>] SyS_ioctl+0x8c/0xa0 [<ffffffc000086cb0>] el0_svc_naked+0x24/0x28 Memory state around the buggy address: ffffffc935769400: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffffc935769480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffffffc935769500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffffffc935769580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffffc935769600: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Fix the issue by always allocating a multiple of sizeof(unsigned long), as we do elsewhere in the vgic code. Fixes: c1bfb577 ("arm/arm64: KVM: vgic: switch to dynamic allocation") Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christian Borntraeger authored
commit d7444794 upstream. In async_pf we try to allocate with NOWAIT to get an element quickly or fail. This code also handle failures gracefully. Lets silence potential page allocation failures under load. qemu-system-s39: page allocation failure: order:0,mode:0x2200000 [...] Call Trace: ([<00000000001146b8>] show_trace+0xf8/0x148) [<000000000011476a>] show_stack+0x62/0xe8 [<00000000004a36b8>] dump_stack+0x70/0x98 [<0000000000272c3a>] warn_alloc_failed+0xd2/0x148 [<000000000027709e>] __alloc_pages_nodemask+0x94e/0xb38 [<00000000002cd36a>] new_slab+0x382/0x400 [<00000000002cf7ac>] ___slab_alloc.constprop.30+0x2dc/0x378 [<00000000002d03d0>] kmem_cache_alloc+0x160/0x1d0 [<0000000000133db4>] kvm_setup_async_pf+0x6c/0x198 [<000000000013dee8>] kvm_arch_vcpu_ioctl_run+0xd48/0xd58 [<000000000012fcaa>] kvm_vcpu_ioctl+0x372/0x690 [<00000000002f66f6>] do_vfs_ioctl+0x3be/0x510 [<00000000002f68ec>] SyS_ioctl+0xa4/0xb8 [<0000000000781c5e>] system_call+0xd6/0x264 [<000003ffa24fa06a>] 0x3ffa24fa06a Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Robin Murphy authored
commit 5d589d81 upstream. The existing msi-map code is fine for shifting the entire RID space upwards, but attempting finer-grained remapping reveals a bug. It turns out that we are mistakenly treating the msi-base part as an offset, not as a new base to remap onto, so things get squiffy when rid-base is nonzero. Fix this, and at the same time add a sanity check against having msi-map-mask clash with a nonzero rid-base, as that's another thing one can easily get wrong. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Benjamin Coddington authored
commit d9dfd8d7 upstream. In the case where d_add_unique() finds an appropriate alias to use it will have already incremented the reference count. An additional dget() to swap the open context's dentry is unnecessary and will leak a reference. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Fixes: 275bb307 ("NFSv4: Move dentry instantiation into the NFSv4-...") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christoph Hellwig authored
commit 50ab8ec7 upstream. See http: //www.infradead.org/rpr.html X-Evolution-Source: 1451162204.2173.11@leira.trondhjem.org Content-Transfer-Encoding: 8bit Mime-Version: 1.0 We support OFFSET_MAX just fine, so don't round down below it. Also switch to using min_t to make the helper more readable. Signed-off-by: Christoph Hellwig <hch@lst.de> Fixes: 433c9237 ("NFS: Clean up nfs_size_to_loff_t()") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Krinkin authored
commit 7ddc971f upstream. kasan reported the following error when i ran xfstest: [ 701.826854] ================================================================== [ 701.826864] BUG: KASAN: use-after-free in dio_bio_complete+0x41a/0x600 at addr ffff880080b95f94 [ 701.826870] Read of size 4 by task loop2/3874 [ 701.826879] page:ffffea000202e540 count:0 mapcount:0 mapping: (null) index:0x0 [ 701.826890] flags: 0x100000000000000() [ 701.826895] page dumped because: kasan: bad access detected [ 701.826904] CPU: 3 PID: 3874 Comm: loop2 Tainted: G B W L 4.5.0-rc1-next-20160129 #83 [ 701.826910] Hardware name: LENOVO 23205NG/23205NG, BIOS G2ET95WW (2.55 ) 07/09/2013 [ 701.826917] ffff88008fadf800 ffff88008fadf758 ffffffff81ca67bb 0000000041b58ab3 [ 701.826941] ffffffff830d1e74 ffffffff81ca6724 ffff88008fadf748 ffffffff8161c05c [ 701.826963] 0000000000000282 ffff88008fadf800 ffffed0010172bf2 ffffea000202e540 [ 701.826987] Call Trace: [ 701.826997] [<ffffffff81ca67bb>] dump_stack+0x97/0xdc [ 701.827005] [<ffffffff81ca6724>] ? _atomic_dec_and_lock+0xc4/0xc4 [ 701.827014] [<ffffffff8161c05c>] ? __dump_page+0x32c/0x490 [ 701.827023] [<ffffffff816b0d03>] kasan_report_error+0x5f3/0x8b0 [ 701.827033] [<ffffffff817c302a>] ? dio_bio_complete+0x41a/0x600 [ 701.827040] [<ffffffff816b1119>] __asan_report_load4_noabort+0x59/0x80 [ 701.827048] [<ffffffff817c302a>] ? dio_bio_complete+0x41a/0x600 [ 701.827053] [<ffffffff817c302a>] dio_bio_complete+0x41a/0x600 [ 701.827057] [<ffffffff81bd19c8>] ? blk_queue_exit+0x108/0x270 [ 701.827060] [<ffffffff817c32b0>] dio_bio_end_aio+0xa0/0x4d0 [ 701.827063] [<ffffffff817c3210>] ? dio_bio_complete+0x600/0x600 [ 701.827067] [<ffffffff81bd2806>] ? blk_account_io_completion+0x316/0x5d0 [ 701.827070] [<ffffffff81bafe89>] bio_endio+0x79/0x200 [ 701.827074] [<ffffffff81bd2c9f>] blk_update_request+0x1df/0xc50 [ 701.827078] [<ffffffff81c02c27>] blk_mq_end_request+0x57/0x120 [ 701.827081] [<ffffffff81c03670>] __blk_mq_complete_request+0x310/0x590 [ 701.827084] [<ffffffff812348d8>] ? set_next_entity+0x2f8/0x2ed0 [ 701.827088] [<ffffffff8124b34d>] ? put_prev_entity+0x22d/0x2a70 [ 701.827091] [<ffffffff81c0394b>] blk_mq_complete_request+0x5b/0x80 [ 701.827094] [<ffffffff821e2a33>] loop_queue_work+0x273/0x19d0 [ 701.827098] [<ffffffff811f6578>] ? finish_task_switch+0x1c8/0x8e0 [ 701.827101] [<ffffffff8129d058>] ? trace_hardirqs_on_caller+0x18/0x6c0 [ 701.827104] [<ffffffff821e27c0>] ? lo_read_simple+0x890/0x890 [ 701.827108] [<ffffffff8129dd60>] ? debug_check_no_locks_freed+0x350/0x350 [ 701.827111] [<ffffffff811f63b0>] ? __hrtick_start+0x130/0x130 [ 701.827115] [<ffffffff82a0c8f6>] ? __schedule+0x936/0x20b0 [ 701.827118] [<ffffffff811dd6bd>] ? kthread_worker_fn+0x3ed/0x8d0 [ 701.827121] [<ffffffff811dd4ed>] ? kthread_worker_fn+0x21d/0x8d0 [ 701.827125] [<ffffffff8129d058>] ? trace_hardirqs_on_caller+0x18/0x6c0 [ 701.827128] [<ffffffff811dd57f>] kthread_worker_fn+0x2af/0x8d0 [ 701.827132] [<ffffffff811dd2d0>] ? __init_kthread_worker+0x170/0x170 [ 701.827135] [<ffffffff82a1ea46>] ? _raw_spin_unlock_irqrestore+0x36/0x60 [ 701.827138] [<ffffffff811dd2d0>] ? __init_kthread_worker+0x170/0x170 [ 701.827141] [<ffffffff811dd2d0>] ? __init_kthread_worker+0x170/0x170 [ 701.827144] [<ffffffff811dd00b>] kthread+0x24b/0x3a0 [ 701.827148] [<ffffffff811dcdc0>] ? kthread_create_on_node+0x4c0/0x4c0 [ 701.827151] [<ffffffff8129d70d>] ? trace_hardirqs_on+0xd/0x10 [ 701.827155] [<ffffffff8116d41d>] ? do_group_exit+0xdd/0x350 [ 701.827158] [<ffffffff811dcdc0>] ? kthread_create_on_node+0x4c0/0x4c0 [ 701.827161] [<ffffffff82a1f52f>] ret_from_fork+0x3f/0x70 [ 701.827165] [<ffffffff811dcdc0>] ? kthread_create_on_node+0x4c0/0x4c0 [ 701.827167] Memory state around the buggy address: [ 701.827170] ffff880080b95e80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 701.827172] ffff880080b95f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 701.827175] >ffff880080b95f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 701.827177] ^ [ 701.827179] ffff880080b96000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 701.827182] ffff880080b96080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 701.827183] ================================================================== The problem is that bio_check_pages_dirty calls bio_put, so we must not access bio fields after bio_check_pages_dirty. Fixes: 9b81c842 ("block: don't access bio->bi_error after bio_put()"). Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hannes Reinecke authored
commit 2d99b55d upstream. Commit 35dc2483 introduced a check for current->mm to see if we have a user space context and only copies data if we do. Now if an IO gets interrupted by a signal data isn't copied into user space any more (as we don't have a user space context) but user space isn't notified about it. This patch modifies the behaviour to return -EINTR from bio_uncopy_user() to notify userland that a signal has interrupted the syscall, otherwise it could lead to a situation where the caller may get a buffer with no data returned. This can be reproduced by issuing SG_IO ioctl()s in one thread while constantly sending signals to it. Fixes: 35dc2483 [SCSI] sg: Fix user memory corruption when SG_IO is interrupted by a signal Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexandra Yates authored
commit 1a1503c5 upstream. Starting from Intel Sunrisepoint (Skylake PCH) the iTCO watchdog resources have been moved to reside under the i801 SMBus host controller whereas previously they were under the LPC device. This patch adds Intel lewisburg SMBus support for iTCO device. It allows to load watchdog dynamically when the hardware is present. Fixes: cdc5a311 ("i2c: i801: add Intel Lewisburg device IDs") Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shawn Lin authored
commit b82fcabe upstream. If phy_pm_runtime_get_sync failed but we already enable regulator, current code return directly without doing regulator_disable. This patch fix this problem and cleanup err handle of phy_power_on to be more readable. Fixes: 3be88125 ("phy: core: Support regulator ...") Cc: Roger Quadros <rogerq@ti.com> Cc: Axel Lin <axel.lin@ingics.com> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tejun Heo authored
commit 5ff8eaac upstream. If cgroup writeback is in use, an inode is associated with a cgroup for writeback. If the inode's main dirtier changes to another cgroup, the association gets updated asynchronously. Nothing was pinning the superblock while such switches are in progress and superblock could go away while async switching is pending or in progress leading to crashes like the following. kernel BUG at fs/jbd2/transaction.c:319! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC CPU: 1 PID: 29158 Comm: kworker/1:10 Not tainted 4.5.0-rc3 #51 Hardware name: Google Google, BIOS Google 01/01/2011 Workqueue: events inode_switch_wbs_work_fn task: ffff880213dbbd40 ti: ffff880209264000 task.ti: ffff880209264000 RIP: 0010:[<ffffffff803e6922>] [<ffffffff803e6922>] start_this_handle+0x382/0x3e0 RSP: 0018:ffff880209267c30 EFLAGS: 00010202 ... Call Trace: [<ffffffff803e6be4>] jbd2__journal_start+0xf4/0x190 [<ffffffff803cfc7e>] __ext4_journal_start_sb+0x4e/0x70 [<ffffffff803b31ec>] ext4_evict_inode+0x12c/0x3d0 [<ffffffff8035338b>] evict+0xbb/0x190 [<ffffffff80354190>] iput+0x130/0x190 [<ffffffff80360223>] inode_switch_wbs_work_fn+0x343/0x4c0 [<ffffffff80279819>] process_one_work+0x129/0x300 [<ffffffff80279b16>] worker_thread+0x126/0x480 [<ffffffff8027ed14>] kthread+0xc4/0xe0 [<ffffffff809771df>] ret_from_fork+0x3f/0x70 Fix it by bumping s_active while cgroup association switching is in flight. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Tahsin Erdogan <tahsin@google.com> Link: http://lkml.kernel.org/g/CAAeU0aNCq7LGODvVGRU-oU_o-6enii5ey0p1c26D1ZzYwkDc5A@mail.gmail.com Fixes: d10c8095 ("writeback: implement foreign cgroup inode bdi_writeback switching") Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tejun Heo authored
commit aa226ff4 upstream. There are three subsystem callbacks in css shutdown path - css_offline(), css_released() and css_free(). Except for css_released(), cgroup core didn't guarantee the order of invocation. css_offline() or css_free() could be called on a parent css before its children. This behavior is unexpected and led to bugs in cpu and memory controller. This patch updates offline path so that a parent css is never offlined before its children. Each css keeps online_cnt which reaches zero iff itself and all its children are offline and offline_css() is invoked only after online_cnt reaches zero. This fixes the memory controller bug and allows the fix for cpu controller. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Reported-by: Brian Christiansen <brian.o.christiansen@gmail.com> Link: http://lkml.kernel.org/g/5698A023.9070703@de.ibm.com Link: http://lkml.kernel.org/g/CAKB58ikDkzc8REt31WBkD99+hxNzjK4+FBmhkgS+NVrC9vjMSg@mail.gmail.com Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tejun Heo authored
commit e93ad19d upstream. If "cpuset.memory_migrate" is set, when a process is moved from one cpuset to another with a different memory node mask, pages in used by the process are migrated to the new set of nodes. This was performed synchronously in the ->attach() callback, which is synchronized against process management. Recently, the synchronization was changed from per-process rwsem to global percpu rwsem for simplicity and optimization. Combined with the synchronous mm migration, this led to deadlocks because mm migration could schedule a work item which may in turn try to create a new worker blocking on the process management lock held from cgroup process migration path. This heavy an operation shouldn't be performed synchronously from that deep inside cgroup migration in the first place. This patch punts the actual migration to an ordered workqueue and updates cgroup process migration and cpuset config update paths to flush the workqueue after all locks are released. This way, the operations still seem synchronous to userland without entangling mm migration with process management synchronization. CPU hotplug can also invoke mm migration but there's no reason for it to wait for mm migrations and thus doesn't synchronize against their completions. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-