- 18 Jul, 2008 12 commits
-
-
David S. Miller authored
They logically all want to trigger a schedule for all device TX queues. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
It just xor hashes over IPv4/IPv6 addresses and ports of transport. The only assumption it makes is that skb_network_header() is set correctly. With bug fixes from Eric Dumazet. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
The only behavior change is that we do not drop packets under any circumstances. If that is absolutely needed, we could easily add it back. With cleanups and help from Johannes Berg. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Devices or device layers can set this to control the queue selection performed by dev_pick_tx(). This function runs under RCU protection, which allows overriding functions to have some way of synchronizing with things like dynamic ->real_num_tx_queues adjustments. This makes the spinlock prefetch in dev_queue_xmit() a little bit less effective, but that's the price right now for correctness. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
The private area of a netdev is now at a fixed offset once more. Unfortunately, some assumptions that netdev_priv() == netdev->priv crept back into the tree. In particular this happened in the loopback driver. Make it use netdev->ml_priv. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
No longer used. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This effectively "flips the switch" by making the core networking and multiqueue-aware drivers use the new TX multiqueue structures. Non-multiqueue drivers need no changes. The interfaces they use such as netif_stop_queue() degenerate into an operation on TX queue zero. So everything "just works" for them. Code that really wants to do "X" to all TX queues now invokes a routine that does so, such as netif_tx_wake_all_queues(), netif_tx_stop_all_queues(), etc. pktgen and netpoll required a little bit more surgery than the others. In particular the pktgen changes, whilst functional, could be largely improved. The initial check in pktgen_xmit() will sometimes check the wrong queue, which is mostly harmless. The thing to do is probably to invoke fill_packet() earlier. The bulk of the netpoll changes is to make the code operate solely on the TX queue indicated by by the SKB queue mapping. Setting of the SKB queue mapping is entirely confined inside of net/core/dev.c:dev_pick_tx(). If we end up needing any kind of special semantics (drops, for example) it will be implemented here. Finally, we now have a "real_num_tx_queues" which is where the driver indicates how many TX queues are actually active. With IGB changes from Jeff Kirsher. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
We will undo this after a few changsets. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This actually fixes a bug added by the RR scheduler changes. The ->bands and ->prio2band parameters were being set outside of the sch_tree_lock() and thus could result in strange behavior and inconsistencies. It might be possible, in the new design (where there will be one qdisc per device TX queue) to allow similar functionality via a TX hash algorithm for RR but I really see no reason to export this aspect of how these multiqueue cards actually implement the scheduling of the the individual DMA TX rings and the single physical MAC/PHY port. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
There is no need for a feature bit for something that can be tested by simply checking the TX queue count. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
alloc_netdev_mq() now allocates an array of netdev_queue structures for TX, based upon the queue_count argument. Furthermore, all accesses to the TX queues are now vectored through the netdev_get_tx_queue() and netdev_for_each_tx_queue() interfaces. This makes it easy to grep the tree for all things that want to get to a TX queue of a net device. Problem spots which are not really multiqueue aware yet, and only work with one queue, can easily be spotted by grepping for all netdev_get_tx_queue() calls that pass in a zero index. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 17 Jul, 2008 28 commits
-
-
Patrick McHardy authored
Increase reliability by retrying to send JoinIn messages after memory allocation failures on each TRANSMIT_PDU event until it succeeds. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neil Horman authored
in __neigh_event_send, if we have a neighbour entry which is in NUD_INCOMPLETE state, we enqueue any outbound frames to that neighbour to the neighbours arp_queue, which is default capped to a length of 3 skbs. If that queue exceeds its set length, it will drop an skb on the queue to enqueue the newly arrived skb. This results in a drop for which we have no statistics incremented. This patch adds an unresolved_discards stat to /proc/net/stat/ndisc_cache to track these lost frames. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
Done with NET_XXX_STATS macros :) To be continued... Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
This one is tricky. The thing is that this macro is only used when killing tw buckets, but since this killer is promiscuous wrt to which net each particular tw belongs to, I have to use it only when NET_NS is off. When the net namespaces are on, I use the INET_INC_STATS_BH for each bucket. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
These places have a tcp_sock, but we'd prefer the sock itself to get net from it. Fortunately, tcp_sk macro is just a type cast, so this replace is really cheap. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
The tcp_enter_memory_pressure calls NET_INC_STATS, but doesn't have where to get the net from. I decided to add a sk argument, not the net itself, only to factor all the required sock_net(sk) calls inside the enter_memory_pressure callback itself. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
Now we're done with the TCP_XXX_STATS macros. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
Same as before - the sock is always there to get the net from, but there are also some places with the net already saved on the stack. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
Fortunately (almost) all the TCP code has a sock to get the net from :) Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
This one sets TCP MIBs after zeroing them, and thus requires the net. The existing single caller can use init_net (temporarily). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
TCP_INC_STATS_USER and TCP_ADD_STATS_BH are currently unused. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
This is the same as the first patch in the set, but preparing the net for TCP_XXX_STATS - save the struct net on the stack where required and possible. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
Very simple - only ip_evictor (fragments) requires such. This patch ends up the IP_XXX_STATS patching. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
All the callers already have either the net itself, or the place where to get it from. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
Some places, that deal with IP statistics already have where to get a struct net from, but use it directly, without declaring a separate variable on the stack. So, save this net on the stack for future IP_XXX_STATS macros. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Currently VLAN filtering is enabled when the first VLAN is added. Obviously before that there's no point in receiving any VLAN packets. Now that we disable VLAN filtering in promiscous mode, we can keep the VLAN filters enabled the remaining time. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
As discussed in this thread: http://www.mail-archive.com/netdev@vger.kernel.org/msg53976.html promiscous mode means to disable *all* filters. Currently only unicast and multicast filtering is disabled. This patch changes all Intel drivers to also disable VLAN filtering. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Will Newton authored
Change PULLHUP to POLLHUP in tcp_poll comments and clean up another comment for grammar and coding style. Signed-off-by: Will Newton <will.newton@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Harvey Harrison authored
net/core/skbuff.c:1335:5: warning: symbol '__skb_splice_bits' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
-
Rumen G. Bogdanovski authored
This patch enhances the synchronization of the closing connections between the master and the backup director. It prevents the closed connections to expire with the 15 min timeout of the ESTABLISHED state on the backup and makes them expire as they would do on the master with much shorter timeouts. Signed-off-by: Rumen G. Bogdanovski <rumen@voicecho.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-