- 22 Jun, 2022 1 commit
-
-
Lukas Wunner authored
Simon reports that if two LAN9514 USB adapters are directly connected without an intermediate switch, the link fails to come up and link LEDs remain dark. The issue was introduced by commit 1ce8b372 ("usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling"). The PHY suffers from a known erratum wherein link detection becomes unreliable if Energy Detect Power-Down is used. In poll mode, the driver works around the erratum by briefly disabling EDPD for 640 msec to detect a neighbor, then re-enabling it to save power. In interrupt mode, no interrupt is signaled if EDPD is used by both link partners, so it must not be enabled at all. We'll recoup the power savings by enabling SUSPEND1 mode on affected LAN95xx chips in a forthcoming commit. Fixes: 1ce8b372 ("usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling") Reported-by:
Simon Han <z.han@kunbus.com> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/439a3f3168c2f9d44b5fd9bb8d2b551711316be6.1655714438.git.lukas@wunner.deSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 20 Jun, 2022 3 commits
-
-
Ziyang Xuan authored
After setting the sock ktls, update ctx->sk_proto to sock->sk_prot by tls_update(), so now ctx->sk_proto->close is tls_sk_proto_close(). When close the sock, tls_sk_proto_close() is called for sock->sk_prot->close is tls_sk_proto_close(). But ctx->sk_proto->close() will be executed later in tls_sk_proto_close(). Thus tls_sk_proto_close() executed repeatedly occurred. That will trigger the following bug. ================================================================= KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:tls_sk_proto_close+0xd8/0xaf0 net/tls/tls_main.c:306 Call Trace: <TASK> tls_sk_proto_close+0x356/0xaf0 net/tls/tls_main.c:329 inet_release+0x12e/0x280 net/ipv4/af_inet.c:428 __sock_release+0xcd/0x280 net/socket.c:650 sock_close+0x18/0x20 net/socket.c:1365 Updating a proto which is same with sock->sk_prot is incorrect. Add proto and sock->sk_prot equality check at the head of tls_update() to fix it. Fixes: 95fa1454 ("bpf: sockmap/tls, close can race with map free") Reported-by: syzbot+29c3c12f3214b85ad081@syzkaller.appspotmail.com Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Rewrite tests in ip6erspan_tunnel_xmit() and erspan_fb_xmit() to not assume transport header is set. syzbot reported: WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 skb_transport_header include/linux/skbuff.h:2911 [inline] WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963 Modules linked in: CPU: 0 PID: 1350 Comm: aoe_tx0 Not tainted 5.19.0-rc2-syzkaller-00160-g274295c6 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 RIP: 0010:skb_transport_header include/linux/skbuff.h:2911 [inline] RIP: 0010:ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963 Code: 0f 47 f0 40 88 b5 7f fe ff ff e8 8c 16 4b f9 89 de bf ff ff ff ff e8 a0 12 4b f9 66 83 fb ff 0f 85 1d f1 ff ff e8 71 16 4b f9 <0f> 0b e9 43 f0 ff ff e8 65 16 4b f9 48 8d 85 30 ff ff ff ba 60 00 RSP: 0018:ffffc90005daf910 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 000000000000ffff RCX: 0000000000000000 RDX: ffff88801f032100 RSI: ffffffff882e8d3f RDI: 0000000000000003 RBP: ffffc90005dafab8 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000000 R12: ffff888024f21d40 R13: 000000000000a288 R14: 00000000000000b0 R15: ffff888025a2e000 FS: 0000000000000000(0000) GS:ffff88802c800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2e425000 CR3: 000000006d099000 CR4: 0000000000152ef0 Call Trace: <TASK> __netdev_start_xmit include/linux/netdevice.h:4805 [inline] netdev_start_xmit include/linux/netdevice.h:4819 [inline] xmit_one net/core/dev.c:3588 [inline] dev_hard_start_xmit+0x188/0x880 net/core/dev.c:3604 sch_direct_xmit+0x19f/0xbe0 net/sched/sch_generic.c:342 __dev_xmit_skb net/core/dev.c:3815 [inline] __dev_queue_xmit+0x14a1/0x3900 net/core/dev.c:4219 dev_queue_xmit include/linux/netdevice.h:2994 [inline] tx+0x6a/0xc0 drivers/block/aoe/aoenet.c:63 kthread+0x1e7/0x3b0 drivers/block/aoe/aoecmd.c:1229 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK> Fixes: d5db21a3 ("erspan: auto detect truncated ipv6 packets.") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: William Tu <u9012063@gmail.com> Signed-off-by:
-
Riccardo Paolo Bestetti authored
Commit 8ff978b8 ("ipv4/raw: support binding to nonlocal addresses") introduces support for binding to nonlocal addresses, as well as some basic test coverage for some of the related cases. Commit b4a028c4 ("ipv4: ping: fix bind address validity check") fixes a regression which incorrectly removed some checks for bind address validation. In addition, it introduces regression tests for those specific checks. However, those regression tests are defective, in that they perform the tests using an incorrect combination of bind flags. As a result, those tests fail when they should succeed. This commit introduces additional regression tests for nonlocal binding and fixes the defective regression tests. It also introduces new set_sysctl calls for the ipv4_bind test group, as to perform the ICMP binding tests it is necessary to allow ICMP socket creation by setting the net.ipv4.ping_group_range knob. Fixes: b4a028c4 ("ipv4: ping: fix bind address validity check") Reported-by:
Riccardo Paolo Bestetti <pbl@bestov.io> Signed-off-by:
-
- 19 Jun, 2022 2 commits
-
-
Oleksij Rempel authored
Latest kernel will explode on the PHY interrupt config, since it depends now on allocated priv. So, run probe to allocate priv to fix it. ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) CPU 0 Unable to handle kernel paging request at virtual address 0000000a, epc == 8050e8a8, ra == 80504b34 ... Call Trace: [<8050e8a8>] at803x_config_intr+0x5c/0xd0 [<80504b34>] phy_request_interrupt+0xa8/0xd0 [<8050289c>] phylink_bringup_phy+0x2d8/0x3ac [<80502b68>] phylink_fwnode_phy_connect+0x118/0x130 [<8074d8ec>] dsa_slave_create+0x270/0x420 [<80743b04>] dsa_port_setup+0x12c/0x148 [<8074580c>] dsa_register_switch+0xaf0/0xcc0 [<80511344>] ar9331_sw_probe+0x370/0x388 [<8050cb78>] mdio_probe+0x44/0x70 [<804df300>] really_probe+0x200/0x424 [<804df7b4>] __driver_probe_device+0x290/0x298 [<804df810>] driver_probe_device+0x54/0xe4 [<804dfd50>] __device_attach_driver+0xe4/0x130 [<804dcb00>] bus_for_each_drv+0xb4/0xd8 [<804dfac4>] __device_attach+0x104/0x1a4 [<804ddd24>] bus_probe_device+0x48/0xc4 [<804deb44>] deferred_probe_work_func+0xf0/0x10c [<800a0ffc>] process_one_work+0x314/0x4d4 [<800a17fc>] worker_thread+0x2a4/0x354 [<800a9a54>] kthread+0x134/0x13c [<8006306c>] ret_from_kernel_thread+0x14/0x1c Same Issue would affect some other PHYs (QCA8081, QCA9561), so fix it too. Fixes: 3265f421 ("net: phy: at803x: add fiber support") Signed-off-by:Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Wentao_Liang authored
The pointer vdev points to a memory region adjacent to a net_device structure ndev, which is a field of hldev. At line 4740, the invocation to vxge_device_unregister unregisters device hldev, and it also releases the memory region pointed by vdev->bar0. At line 4743, the freed memory region is referenced (i.e., iounmap(vdev->bar0)), resulting in a use-after-free vulnerability. We can fix the bug by calling iounmap before vxge_device_unregister. 4721. static void vxge_remove(struct pci_dev *pdev) 4722. { 4723. struct __vxge_hw_device *hldev; 4724. struct vxgedev *vdev; … 4731. vdev = netdev_priv(hldev->ndev); … 4740. vxge_device_unregister(hldev); 4741. /* Do not call pci_disable_sriov here, as it will break child devices */ 4742. vxge_hw_device_terminate(hldev); 4743. iounmap(vdev->bar0); … 4749 vxge_debug_init(vdev->level_trace, "%s:%d Device unregistered", 4750 __func__, __LINE__); 4751 vxge_debug_entryexit(vdev->level_trace, "%s:%d Exiting...", __func__, 4752 __LINE__); 4753. } This is the screenshot when the vulnerability is triggered by using KASAN. We can see that there is a use-after-free reported by KASAN. /***************************start**************************/ root@kernel:~# echo 1 > /sys/bus/pci/devices/0000:00:03.0/remove [ 178.296316] vxge_remove [ 182.057081] ================================================================== [ 182.057548] BUG: KASAN: use-after-free in vxge_remove+0xe0/0x15c [ 182.057760] Read of size 8 at addr ffff888006c76598 by task bash/119 [ 182.057983] [ 182.058747] CPU: 0 PID: 119 Comm: bash Not tainted 5.18.0 #5 [ 182.058919] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 182.059463] Call Trace: [ 182.059726] <TASK> [ 182.060017] dump_stack_lvl+0x34/0x44 [ 182.060316] print_report.cold+0xb2/0x6b7 [ 182.060401] ? kfree+0x89/0x290 [ 182.060478] ? vxge_remove+0xe0/0x15c [ 182.060545] kasan_report+0xa9/0x120 [ 182.060629] ? vxge_remove+0xe0/0x15c [ 182.060706] vxge_remove+0xe0/0x15c [ 182.060793] pci_device_remove+0x5d/0xe0 [ 182.060968] device_release_driver_internal+0xf1/0x180 [ 182.061063] pci_stop_bus_device+0xae/0xe0 [ 182.061150] pci_stop_and_remove_bus_device_locked+0x11/0x20 [ 182.061236] remove_store+0xc6/0xe0 [ 182.061297] ? subordinate_bus_number_show+0xc0/0xc0 [ 182.061359] ? __mutex_lock_slowpath+0x10/0x10 [ 182.061438] ? sysfs_kf_write+0x6d/0xa0 [ 182.061525] kernfs_fop_write_iter+0x1b0/0x260 [ 182.061610] ? sysfs_kf_bin_read+0xf0/0xf0 [ 182.061695] new_sync_write+0x209/0x310 [ 182.061789] ? new_sync_read+0x310/0x310 [ 182.061865] ? cgroup_rstat_updated+0x5c/0x170 [ 182.061937] ? preempt_count_sub+0xf/0xb0 [ 182.061995] ? pick_next_entity+0x13a/0x220 [ 182.062063] ? __inode_security_revalidate+0x44/0x80 [ 182.062155] ? security_file_permission+0x46/0x2a0 [ 182.062230] vfs_write+0x33f/0x3e0 [ 182.062303] ksys_write+0xb4/0x150 [ 182.062369] ? __ia32_sys_read+0x40/0x40 [ 182.062451] do_syscall_64+0x3b/0x90 [ 182.062531] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 182.062894] RIP: 0033:0x7f3f37d17274 [ 182.063558] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 48 8d 05 89 54 0d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53 [ 182.063797] RSP: 002b:00007ffd5ba9e178 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 182.064117] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f3f37d17274 [ 182.064219] RDX: 0000000000000002 RSI: 000055bbec327180 RDI: 0000000000000001 [ 182.064315] RBP: 000055bbec327180 R08: 000000000000000a R09: 00007f3f37de7cf0 [ 182.064414] R10: 000000000000000a R11: 0000000000000246 R12: 00007f3f37de8760 [ 182.064513] R13: 0000000000000002 R14: 00007f3f37de3760 R15: 0000000000000002 [ 182.064691] </TASK> [ 182.064916] [ 182.065224] The buggy address belongs to the physical page: [ 182.065804] page:00000000ef31e4f4 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x6c76 [ 182.067419] flags: 0x100000000000000(node=0|zone=1) [ 182.068997] raw: 0100000000000000 0000000000000000 ffffea00001b1d88 0000000000000000 [ 182.069118] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 182.069294] page dumped because: kasan: bad access detected [ 182.069331] [ 182.069360] Memory state around the buggy address: [ 182.070006] ffff888006c76480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070136] ffff888006c76500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070230] >ffff888006c76580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070305] ^ [ 182.070456] ffff888006c76600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070505] ffff888006c76680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070606] ================================================================== [ 182.071374] Disabling lock debugging due to kernel taint /*****************************end*****************************/ After fixing the bug as done in the patch, we can find KASAN do not report the bug and the device(00:03.0) has been successfully removed. /*****************************start***************************/ root@kernel:~# echo 1 > /sys/bus/pci/devices/0000:00:03.0/remove root@kernel:~# /******************************end****************************/ Signed-off-by:Wentao_Liang <Wentao_Liang_g@163.com> Signed-off-by:
-
- 18 Jun, 2022 5 commits
-
-
Peilin Ye authored
As reported by Yuming, currently tc always show a latency of UINT_MAX for netem Qdisc's on 32-bit platforms: $ tc qdisc add dev dummy0 root netem latency 100ms $ tc qdisc show dev dummy0 qdisc netem 8001: root refcnt 2 limit 1000 delay 275s 275s ^^^^^^^^^^^^^^^^ Let us take a closer look at netem_dump(): qopt.latency = min_t(psched_tdiff_t, PSCHED_NS2TICKS(q->latency, UINT_MAX); qopt.latency is __u32, psched_tdiff_t is signed long, (psched_tdiff_t)(UINT_MAX) is negative for 32-bit platforms, so qopt.latency is always UINT_MAX. Fix it by using psched_time_t (u64) instead. Note: confusingly, users have two ways to specify 'latency': 1. normally, via '__u32 latency' in struct tc_netem_qopt; 2. via the TCA_NETEM_LATENCY64 attribute, which is s64. For the second case, theoretically 'latency' could be negative. This patch ignores that corner case, since it is broken (i.e. assigning a negative s64 to __u32) anyways, and should be handled separately. Thanks Ted Lin for the analysis [1] . [1] https://github.com/raspberrypi/linux/issues/3512Reported-by:Yuming Chen <chenyuming.junnan@bytedance.com> Fixes: 112f9cb6 ("netem: convert to qdisc_watchdog_schedule_ns") Reviewed-by:
Cong Wang <cong.wang@bytedance.com> Signed-off-by:
Peilin Ye <peilin.ye@bytedance.com> Acked-by:
Stephen Hemminger <stephen@networkplumber.org> Link: https://lore.kernel.org/r/20220616234336.2443-1-yepeilin.cs@gmail.comSigned-off-by:
-
Ivan Vecera authored
Function fallback_set_params() checks if the module type returned by a driver is ETH_MODULE_SFF_8079 and in this case it assumes that buffer returns a concatenated content of page A0h and A2h. The check is wrong because the correct type is ETH_MODULE_SFF_8472. Fixes: 96d971e3 ("ethtool: Add fallback to get_module_eeprom from netlink command") Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220616160856.3623273-1-ivecera@redhat.comSigned-off-by:
-
Jay Vosburgh authored
The bonding ARP monitor fails to decrement send_peer_notif, the number of peer notifications (gratuitous ARP or ND) to be sent. This results in a continuous series of notifications. Correct this by decrementing the counter for each notification. Reported-by:
Jonathan Toppins <jtoppins@redhat.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Fixes: b0929915 ("bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor") Link: https://lore.kernel.org/netdev/b2fd4147-8f50-bebd-963a-1a3e8d1d9715@redhat.com/Tested-by:
-
Lorenzo Bianconi authored
Fix the following use-after-free bug in igb_clean_tx_ring routine when the NIC is running in XDP mode. The issue can be triggered redirecting traffic into the igb NIC and then closing the device while the traffic is flowing. [ 73.322719] CPU: 1 PID: 487 Comm: xdp_redirect Not tainted 5.18.3-apu2 #9 [ 73.330639] Hardware name: PC Engines APU2/APU2, BIOS 4.0.7 02/28/2017 [ 73.337434] RIP: 0010:refcount_warn_saturate+0xa7/0xf0 [ 73.362283] RSP: 0018:ffffc9000081f798 EFLAGS: 00010282 [ 73.367761] RAX: 0000000000000000 RBX: ffffc90000420f80 RCX: 0000000000000000 [ 73.375200] RDX: ffff88811ad22d00 RSI: ffff88811ad171e0 RDI: ffff88811ad171e0 [ 73.382590] RBP: 0000000000000900 R08: ffffffff82298f28 R09: 0000000000000058 [ 73.390008] R10: 0000000000000219 R11: ffffffff82280f40 R12: 0000000000000090 [ 73.397356] R13: ffff888102343a40 R14: ffff88810359e0e4 R15: 0000000000000000 [ 73.404806] FS: 00007ff38d31d740(0000) GS:ffff88811ad00000(0000) knlGS:0000000000000000 [ 73.413129] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 73.419096] CR2: 000055cff35f13f8 CR3: 0000000106391000 CR4: 00000000000406e0 [ 73.426565] Call Trace: [ 73.429087] <TASK> [ 73.431314] igb_clean_tx_ring+0x43/0x140 [igb] [ 73.436002] igb_down+0x1d7/0x220 [igb] [ 73.439974] __igb_close+0x3c/0x120 [igb] [ 73.444118] igb_xdp+0x10c/0x150 [igb] [ 73.447983] ? igb_pci_sriov_configure+0x70/0x70 [igb] [ 73.453362] dev_xdp_install+0xda/0x110 [ 73.457371] dev_xdp_attach+0x1da/0x550 [ 73.461369] do_setlink+0xfd0/0x10f0 [ 73.465166] ? __nla_validate_parse+0x89/0xc70 [ 73.469714] rtnl_setlink+0x11a/0x1e0 [ 73.473547] rtnetlink_rcv_msg+0x145/0x3d0 [ 73.477709] ? rtnl_calcit.isra.0+0x130/0x130 [ 73.482258] netlink_rcv_skb+0x8d/0x110 [ 73.486229] netlink_unicast+0x230/0x340 [ 73.490317] netlink_sendmsg+0x215/0x470 [ 73.494395] __sys_sendto+0x179/0x190 [ 73.498268] ? move_addr_to_user+0x37/0x70 [ 73.502547] ? __sys_getsockname+0x84/0xe0 [ 73.506853] ? netlink_setsockopt+0x1c1/0x4a0 [ 73.511349] ? __sys_setsockopt+0xc8/0x1d0 [ 73.515636] __x64_sys_sendto+0x20/0x30 [ 73.519603] do_syscall_64+0x3b/0x80 [ 73.523399] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 73.528712] RIP: 0033:0x7ff38d41f20c [ 73.551866] RSP: 002b:00007fff3b945a68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 73.559640] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff38d41f20c [ 73.567066] RDX: 0000000000000034 RSI: 00007fff3b945b30 RDI: 0000000000000003 [ 73.574457] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 [ 73.581852] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff3b945ab0 [ 73.589179] R13: 0000000000000000 R14: 0000000000000003 R15: 00007fff3b945b30 [ 73.596545] </TASK> [ 73.598842] ---[ end trace 0000000000000000 ]--- Fixes: 9cbc948b ("igb: add XDP support") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/r/e5c01d549dc37bff18e46aeabd6fb28a7bcf84be.1655388571.git.lorenzo@kernel.orgSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2022-06-17 We've added 12 non-merge commits during the last 4 day(s) which contain a total of 14 files changed, 305 insertions(+), 107 deletions(-). The main changes are: 1) Fix x86 JIT tailcall count offset on BPF-2-BPF call, from Jakub Sitnicki. 2) Fix a kprobe_multi link bug which misplaces BPF cookies, from Jiri Olsa. 3) Fix an infinite loop when processing a module's BTF, from Kumar Kartikeya Dwivedi. 4) Fix getting a rethook only in RCU available context, from Masami Hiramatsu. 5) Fix request socket refcount leak in sk lookup helpers, from Jon Maxwell. 6) Fix xsk xmit behavior which wrongly adds skb to already full cq, from Ciara Loftus. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: rethook: Reject getting a rethook if RCU is not watching fprobe, samples: Add use_trace option and show hit/missed counter bpf, docs: Update some of the JIT/maintenance entries selftest/bpf: Fix kprobe_multi bench test bpf: Force cookies array to follow symbols sorting ftrace: Keep address offset in ftrace_lookup_symbols selftests/bpf: Shuffle cookies symbols in kprobe multi test selftests/bpf: Test tail call counting with bpf2bpf and data on stack bpf, x86: Fix tail call count offset calculation on bpf2bpf call bpf: Limit maximum modifier chain length in btf_check_type_tags bpf: Fix request_sock leak in sk lookup helpers xsk: Fix generic transmit when completion queue reservation fails ==================== Link: https://lore.kernel.org/r/20220617202119.2421-1-daniel@iogearbox.netSigned-off-by:
-
- 17 Jun, 2022 14 commits
-
-
Masami Hiramatsu (Google) authored
Since the rethook_recycle() will involve the call_rcu() for reclaiming the rethook_instance, the rethook must be set up at the RCU available context (non idle). This rethook_recycle() in the rethook trampoline handler is inevitable, thus the RCU available check must be done before setting the rethook trampoline. This adds a rcu_is_watching() check in the rethook_try_get() so that it will return NULL if it is called when !rcu_is_watching(). Fixes: 54ecbe6f ("rethook: Add a generic return hook") Signed-off-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by:
Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/165461827269.280167.7379263615545598958.stgit@devnote2
-
Masami Hiramatsu (Google) authored
Add use_trace option to use trace_printk() instead of pr_info() so that the handler doesn't involve the RCU operations. And show the hit and missed counter so that the user can check how many times the probe handler hit and missed. Signed-off-by:
-
Daniel Borkmann authored
Various minor updates around some of the BPF-related entries: JITs for ARM32/NFP/SPARC/X86-32 haven't seen updates in quite a while, thus for now, mark them as 'Odd Fixes' until they become more actively developed. JITs for POWERPC/S390 are in good shape and receive active development and review, thus bump to 'Supported' similar as we have with X86-64/ARM64. JITs for MIPS/RISC-V are in similar good shape as the ones mentioned above, but looked after mostly in spare time, thus leave for now in 'Maintained' state. Add Michael to PPC JIT given he's picking up the patches there, so it better reflects today's state. Also, I haven't done much reviewing around BPF sockmap/kTLS after John and I did the big rework back in the days to integrate sockmap with kTLS. These days, most of this is taken care by John, Jakub {Sitnicki,Kicinski} and others in the community, so remove myself from these two. Lastly, move all BPF-related entries into one place, that is, move the sockmap one over near rest of BPF. Signed-off-by:Andrii Nakryiko <andrii@kernel.org> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/f9b8a63a0b48dc764bd4c50f87632889f5813f69.1655494758.git.daniel@iogearbox.netSigned-off-by:
-
Riccardo Paolo Bestetti authored
Commit 8ff978b8 ("ipv4/raw: support binding to nonlocal addresses") introduced a helper function to fold duplicated validity checks of bind addresses into inet_addr_valid_or_nonlocal(). However, this caused an unintended regression in ping_check_bind_addr(), which previously would reject binding to multicast and broadcast addresses, but now these are both incorrectly allowed as reported in [1]. This patch restores the original check. A simple reordering is done to improve readability and make it evident that multicast and broadcast addresses should not be allowed. Also, add an early exit for INADDR_ANY which replaces lost behavior added by commit 0ce779a9 ("net: Avoid unnecessary inet_addr_type() call when addr is INADDR_ANY"). Furthermore, this patch introduces regression selftests to catch these specific cases. [1] https://lore.kernel.org/netdev/CANP3RGdkAcDyAZoT1h8Gtuu0saq+eOrrTiWbxnOs+5zn+cpyKg@mail.gmail.com/ Fixes: 8ff978b8 ("ipv4/raw: support binding to nonlocal addresses") Cc: Miaohe Lin <linmiaohe@huawei.com> Reported-by:
Maciej Żenczykowski <maze@google.com> Signed-off-by:
Carlos Llamas <cmllamas@google.com> Signed-off-by:
-
Xu Jia authored
Hulk Robot reports incorrect sp->rx_count_cooked value in decode_std_command(). This should be caused by the subtracting from sp->rx_count_cooked before. It seems that sp->rx_count_cooked value is changed to 0, which bypassed the previous judgment. The situation is shown below: (Thread 1) | (Thread 2) decode_std_command() | resync_tnc() ... | if (rest == 2) | sp->rx_count_cooked -= 2; | else if (rest == 3) | ... | sp->rx_count_cooked = 0; sp->rx_count_cooked -= 1; | for (i = 0; i < sp->rx_count_cooked; i++) // report error checksum += sp->cooked_buf[i]; sp->rx_count_cooked is a shared variable but is not protected by a lock. The same applies to sp->rx_count. This patch adds a lock to fix the bug. The fail log is shown below: ======================================================================= UBSAN: array-index-out-of-bounds in drivers/net/hamradio/6pack.c:925:31 index 400 is out of range for type 'unsigned char [400]' CPU: 3 PID: 7433 Comm: kworker/u10:1 Not tainted 5.18.0-rc5-00163-g4b97bac0 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: events_unbound flush_to_ldisc Call Trace: <TASK> dump_stack_lvl+0xcd/0x134 ubsan_epilogue+0xb/0x50 __ubsan_handle_out_of_bounds.cold+0x62/0x6c sixpack_receive_buf+0xfda/0x1330 tty_ldisc_receive_buf+0x13e/0x180 tty_port_default_receive_buf+0x6d/0xa0 flush_to_ldisc+0x213/0x3f0 process_one_work+0x98f/0x1620 worker_thread+0x665/0x1080 kthread+0x2e9/0x3a0 ret_from_fork+0x1f/0x30 ... Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
Xu Jia <xujia39@huawei.com> Signed-off-by:
-
Hoang Le authored
syzbot found the following issue on: ================================================================== BUG: KASAN: use-after-free in tipc_named_reinit+0x94f/0x9b0 net/tipc/name_distr.c:413 Read of size 8 at addr ffff88805299a000 by task kworker/1:9/23764 CPU: 1 PID: 23764 Comm: kworker/1:9 Not tainted 5.18.0-rc4-syzkaller-00878-g17d49e6e #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events tipc_net_finalize_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0xeb/0x495 mm/kasan/report.c:313 print_report mm/kasan/report.c:429 [inline] kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491 tipc_named_reinit+0x94f/0x9b0 net/tipc/name_distr.c:413 tipc_net_finalize+0x234/0x3d0 net/tipc/net.c:138 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298 </TASK> [...] ================================================================== In the commit d966ddcc ("tipc: fix a deadlock when flushing scheduled work"), the cancel_work_sync() function just to make sure ONLY the work tipc_net_finalize_work() is executing/pending on any CPU completed before tipc namespace is destroyed through tipc_exit_net(). But this function is not guaranteed the work is the last queued. So, the destroyed instance may be accessed in the work which will try to enqueue later. In order to completely fix, we re-order the calling of cancel_work_sync() to make sure the work tipc_net_finalize_work() was last queued and it must be completed by calling cancel_work_sync(). Reported-by: syzbot+47af19f3307fc9c5c82e@syzkaller.appspotmail.com Fixes: d966ddcc ("tipc: fix a deadlock when flushing scheduled work") Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by:
-
Jay Vosburgh authored
Since commit 21a75f09 ("bonding: Fix ARP monitor validation"), the bonding ARP / ND link monitors depend on the trans_start time to determine link availability. NETIF_F_LLTX drivers must update trans_start directly, which veth does not do. This prevents use of the ARP or ND link monitors with veth interfaces in a bond. Resolve this by having veth_xmit update the trans_start time. Reported-by:
-
Eric Dumazet authored
dev_isalive() is called under RTNL or dev_base_lock protection. This means that changes to dev->reg_state should be done with both locks held. syzbot reported: BUG: KCSAN: data-race in register_netdevice / type_show write to 0xffff888144ecf518 of 1 bytes by task 20886 on cpu 0: register_netdevice+0xb9f/0xdf0 net/core/dev.c:10050 lapbeth_new_device drivers/net/wan/lapbether.c:414 [inline] lapbeth_device_event+0x4a0/0x6c0 drivers/net/wan/lapbether.c:456 notifier_call_chain kernel/notifier.c:87 [inline] raw_notifier_call_chain+0x53/0xb0 kernel/notifier.c:455 __dev_notify_flags+0x1d6/0x3a0 dev_change_flags+0xa2/0xc0 net/core/dev.c:8607 do_setlink+0x778/0x2230 net/core/rtnetlink.c:2780 __rtnl_newlink net/core/rtnetlink.c:3546 [inline] rtnl_newlink+0x114c/0x16a0 net/core/rtnetlink.c:3593 rtnetlink_rcv_msg+0x811/0x8c0 net/core/rtnetlink.c:6089 netlink_rcv_skb+0x13e/0x240 net/netlink/af_netlink.c:2501 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6107 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x58a/0x660 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x661/0x750 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] __sys_sendto+0x21e/0x2c0 net/socket.c:2119 __do_sys_sendto net/socket.c:2131 [inline] __se_sys_sendto net/socket.c:2127 [inline] __x64_sys_sendto+0x74/0x90 net/socket.c:2127 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 read to 0xffff888144ecf518 of 1 bytes by task 20423 on cpu 1: dev_isalive net/core/net-sysfs.c:38 [inline] netdev_show net/core/net-sysfs.c:50 [inline] type_show+0x24/0x90 net/core/net-sysfs.c:112 dev_attr_show+0x35/0x90 drivers/base/core.c:2095 sysfs_kf_seq_show+0x175/0x240 fs/sysfs/file.c:59 kernfs_seq_show+0x75/0x80 fs/kernfs/file.c:162 seq_read_iter+0x2c3/0x8e0 fs/seq_file.c:230 kernfs_fop_read_iter+0xd1/0x2f0 fs/kernfs/file.c:235 call_read_iter include/linux/fs.h:2052 [inline] new_sync_read fs/read_write.c:401 [inline] vfs_read+0x5a5/0x6a0 fs/read_write.c:482 ksys_read+0xe8/0x1a0 fs/read_write.c:620 __do_sys_read fs/read_write.c:630 [inline] __se_sys_read fs/read_write.c:628 [inline] __x64_sys_read+0x3e/0x50 fs/read_write.c:628 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 value changed: 0x00 -> 0x01 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 20423 Comm: udevd Tainted: G W 5.19.0-rc2-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Claudiu Manoil authored
Even when the eth port is resticted to work with speeds not higher than 1G, and so the eth driver is requesting the phy (via phylink) to advertise up to 1000BASET support, the aquantia phy device is still advertising for 2.5G and 5G speeds. Clear these advertising defaults when requested. Cc: Ondrej Spacek <ondrej.spacek@nxp.com> Fixes: 09c4c57f ("net: phy: aquantia: add support for auto-negotiation configuration") Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20220610084037.7625-1-claudiu.manoil@nxp.comSigned-off-by:
-
Alexei Starovoitov authored
Jiri Olsa says: ==================== hi, there's bug in kprobe_multi link that makes cookies misplaced when using symbols to attach. The reason is that we sort symbols by name but not adjacent cookie values. Current test did not find it because bpf_fentry_test* are already sorted by name. v3 changes: - fixed kprobe_multi bench test to filter out invalid entries from available_filter_functions v2 changes: - rebased on top of bpf/master - checking if cookies are defined later in swap function [Andrii] - added acks thanks, jirka ==================== Signed-off-by: -
Jiri Olsa authored
With [1] the available_filter_functions file contains records starting with __ftrace_invalid_address___ and marking disabled entries. We need to filter them out for the bench test to pass only resolvable symbols to kernel. [1] commit b39181f7 ("ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function") Fixes: b39181f7 ("ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function") Signed-off-by:
-
Jiri Olsa authored
When user specifies symbols and cookies for kprobe_multi link interface it's very likely the cookies will be misplaced and returned to wrong functions (via get_attach_cookie helper). The reason is that to resolve the provided functions we sort them before passing them to ftrace_lookup_symbols, but we do not do the same sort on the cookie values. Fixing this by using sort_r function with custom swap callback that swaps cookie values as well. Fixes: 0236fec5 ("bpf: Resolve symbols with ftrace_lookup_symbols for kprobe multi link") Signed-off-by:
-
Jiri Olsa authored
We want to store the resolved address on the same index as the symbol string, because that's the user (bpf kprobe link) code assumption. Also making sure we don't store duplicates that might be present in kallsyms. Acked-by:
Song Liu <songliubraving@fb.com> Acked-by:
-
Jiri Olsa authored
There's a kernel bug that causes cookies to be misplaced and the reason we did not catch this with this test is that we provide bpf_fentry_test* functions already sorted by name. Shuffling function bpf_fentry_test2 deeper in the list and keeping the current cookie values as before will trigger the bug. The kernel fix is coming in following changes. Acked-by:
-
- 16 Jun, 2022 5 commits
-
-
Jakub Sitnicki authored
Cover the case when tail call count needs to be passed from BPF function to BPF function, and the caller has data on stack. Specifically when the size of data allocated on BPF stack is not a multiple on 8. Signed-off-by:
Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
-
Jakub Sitnicki authored
On x86-64 the tail call count is passed from one BPF function to another through %rax. Additionally, on function entry, the tail call count value is stored on stack right after the BPF program stack, due to register shortage. The stored count is later loaded from stack either when performing a tail call - to check if we have not reached the tail call limit - or before calling another BPF function call in order to pass it via %rax. In the latter case, we miscalculate the offset at which the tail call count was stored on function entry. The JIT does not take into account that the allocated BPF program stack is always a multiple of 8 on x86, while the actual stack depth does not have to be. This leads to a load from an offset that belongs to the BPF stack, as shown in the example below: SEC("tc") int entry(struct __sk_buff *skb) { /* Have data on stack which size is not a multiple of 8 */ volatile char arr[1] = {}; return subprog_tail(skb); } int entry(struct __sk_buff * skb): 0: (b4) w2 = 0 1: (73) *(u8 *)(r10 -1) = r2 2: (85) call pc+1#bpf_prog_ce2f79bb5f3e06dd_F 3: (95) exit int entry(struct __sk_buff * skb): 0xffffffffa0201788: nop DWORD PTR [rax+rax*1+0x0] 0xffffffffa020178d: xor eax,eax 0xffffffffa020178f: push rbp 0xffffffffa0201790: mov rbp,rsp 0xffffffffa0201793: sub rsp,0x8 0xffffffffa020179a: push rax 0xffffffffa020179b: xor esi,esi 0xffffffffa020179d: mov BYTE PTR [rbp-0x1],sil 0xffffffffa02017a1: mov rax,QWORD PTR [rbp-0x9] !!! tail call count 0xffffffffa02017a8: call 0xffffffffa02017d8 !!! is at rbp-0x10 0xffffffffa02017ad: leave 0xffffffffa02017ae: ret Fix it by rounding up the BPF stack depth to a multiple of 8, when calculating the tail call count offset on stack. Fixes: ebf7d1f5 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT") Signed-off-by:Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Mostly driver fixes. Current release - regressions: - Revert "net: Add a second bind table hashed by port and address", needs more work - amd-xgbe: use platform_irq_count(), static setup of IRQ resources had been removed from DT core - dts: at91: ksz9477_evb: add phy-mode to fix port/phy validation Current release - new code bugs: - hns3: modify the ring param print info Previous releases - always broken: - axienet: make the 64b addressable DMA depends on 64b architectures - iavf: fix issue with MAC address of VF shown as zero - ice: fix PTP TX timestamp offset calculation - usb: ax88179_178a needs FLAG_SEND_ZLP Misc: - document some net.sctp.* sysctls" * tag 'net-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (31 commits) net: axienet: add missing error return code in axienet_probe() Revert "net: Add a second bind table hashed by port and address" net: ax25: Fix deadlock caused by skb_recv_datagram in ax25_recvmsg net: usb: ax88179_178a needs FLAG_SEND_ZLP MAINTAINERS: add include/dt-bindings/net to NETWORKING DRIVERS ARM: dts: at91: ksz9477_evb: fix port/phy validation net: bgmac: Fix an erroneous kfree() in bgmac_remove() ice: Fix memory corruption in VF driver ice: Fix queue config fail handling ice: Sync VLAN filtering features for DVM ice: Fix PTP TX timestamp offset calculation mlxsw: spectrum_cnt: Reorder counter pools docs: networking: phy: Fix a typo amd-xgbe: Use platform_irq_count() octeontx2-vf: Add support for adaptive interrupt coalescing xilinx: Fix build on x86. net: axienet: Use iowrite64 to write all 64b descriptor pointers net: axienet: make the 64b addresable DMA depends on 64b archectures net: hns3: fix tm port shapping of fibre port is incorrect after driver initialization net: hns3: fix PF rss size initialization bug ... -
Yang Yingliang authored
It should return error code in error path in axienet_probe(). Fixes: 00be43a7 ("net: axienet: make the 64b addresable DMA depends on 64b archectures") Reported-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220616062917.3601-1-yangyingliang@huawei.comSigned-off-by:
-
Joanne Koong authored
This reverts: commit d5a42de8 ("net: Add a second bind table hashed by port and address") commit 538aaf9b ("selftests: Add test for timing a bind request to a port with a populated bhash entry") Link: https://lore.kernel.org/netdev/20220520001834.2247810-1-kuba@kernel.org/ There are a few things that need to be fixed here: * Updating bhash2 in cases where the socket's rcv saddr changes * Adding bhash2 hashbucket locks Links to syzbot reports: https://lore.kernel.org/netdev/00000000000022208805e0df247a@google.com/ https://lore.kernel.org/netdev/0000000000003f33bc05dfaf44fe@google.com/ Fixes: d5a42de8 ("net: Add a second bind table hashed by port and address") Reported-by: syzbot+015d756bbd1f8b5c8f09@syzkaller.appspotmail.com Reported-by: syzbot+98fd2d1422063b0f8c44@syzkaller.appspotmail.com Reported-by: syzbot+0a847a982613c6438fba@syzkaller.appspotmail.com Signed-off-by:
Joanne Koong <joannelkoong@gmail.com> Link: https://lore.kernel.org/r/20220615193213.2419568-1-joannelkoong@gmail.comSigned-off-by:
-
- 15 Jun, 2022 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull hardening fixes from Kees Cook: - Correctly handle vm_map areas in hardened usercopy (Matthew Wilcox) - Adjust CFI RCU usage to avoid boot splats with cpuidle (Sami Tolvanen) * tag 'hardening-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: usercopy: Make usercopy resilient against ridiculously large copies usercopy: Cast pointer to an integer once usercopy: Handle vm_map_ram() areas cfi: Fix __cfi_slowpath_diag RCU usage with cpuidle
-
Linus Torvalds authored
Merge tag 'tpmdd-next-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm fixes from Jarkko Sakkinen: "Two fixes for this merge window" * tag 'tpmdd-next-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: certs: fix and refactor CONFIG_SYSTEM_BLACKLIST_HASH_LIST build certs/blacklist_hashes.c: fix const confusion in certs blacklist
-
Masahiro Yamada authored
Commit addf4663 ("certs: Check that builtin blacklist hashes are valid") was applied 8 months after the submission. In the meantime, the base code had been removed by commit b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro"). Fix the Makefile. Create a local copy of $(CONFIG_SYSTEM_BLACKLIST_HASH_LIST). It is included from certs/blacklist_hashes.c and also works as a timestamp. Send error messages from check-blacklist-hashes.awk to stderr instead of stdout. Fixes: addf4663 ("certs: Check that builtin blacklist hashes are valid") Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Reviewed-by:
Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by:
Mickaël Salaün <mic@linux.microsoft.com> Signed-off-by:
-
Masahiro Yamada authored
This file fails to compile as follows: CC certs/blacklist_hashes.o certs/blacklist_hashes.c:4:1: error: ignoring attribute ‘section (".init.data")’ because it conflicts with previous ‘section (".init.rodata")’ [-Werror=attributes] 4 | const char __initdata *const blacklist_hashes[] = { | ^~~~~ In file included from certs/blacklist_hashes.c:2: certs/blacklist.h:5:38: note: previous declaration here 5 | extern const char __initconst *const blacklist_hashes[]; | ^~~~~~~~~~~~~~~~ Apply the same fix as commit 2be04df5 ("certs/blacklist_nohashes.c: fix const confusion in certs blacklist"). Fixes: 734114f8 ("KEYS: Add a system blacklist keyring") Signed-off-by: -
Kumar Kartikeya Dwivedi authored
On processing a module BTF of module built for an older kernel, we might sometimes find that some type points to itself forming a loop. If such a type is a modifier, btf_check_type_tags's while loop following modifier chain will be caught in an infinite loop. Fix this by defining a maximum chain length and bailing out if we spin any longer than that. Fixes: eb596b09 ("bpf: Ensure type tags precede modifiers in BTF") Reported-by:
Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by:
Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220615042151.2266537-1-memxor@gmail.com
-
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds authored
Pull vfs idmapping fix from Christian Brauner: "This fixes an issue where we fail to change the group of a file when the caller owns the file and is a member of the group to change to. This is only relevant on idmapped mounts. There's a detailed description in the commit message and regression tests have been added to xfstests" * tag 'fs.fixes.v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: fs: account for group membership
-
Jon Maxwell authored
A customer reported a request_socket leak in a Calico cloud environment. We found that a BPF program was doing a socket lookup with takes a refcnt on the socket and that it was finding the request_socket but returning the parent LISTEN socket via sk_to_full_sk() without decrementing the child request socket 1st, resulting in request_sock slab object leak. This patch retains the existing behaviour of returning full socks to the caller but it also decrements the child request_socket if one is present before doing so to prevent the leak. Thanks to Curtis Taylor for all the help in diagnosing and testing this. And thanks to Antoine Tenart for the reproducer and patch input. v2 of this patch contains, refactor as per Daniel Borkmann's suggestions to validate RCU flags on the listen socket so that it balances with bpf_sk_release() and update comments as per Martin KaFai Lau's suggestion. One small change to Daniels suggestion, put "sk = sk2" under "if (sk2 != sk)" to avoid an extra instruction. Fixes: f7355a6c ("bpf: Check sk_fullsock() before returning from bpf_sk_lookup()") Fixes: edbf8c01 ("bpf: add skc_lookup_tcp helper") Co-developed-by:
Antoine Tenart <atenart@kernel.org> Signed-off-by:
Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by:
Curtis Taylor <cutaylor-pub@yahoo.com> Cc: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/56d6f898-bde0-bb25-3427-12a330b29fb8@iogearbox.net Link: https://lore.kernel.org/bpf/20220615011540.813025-1-jmaxwell37@gmail.com
-
Duoming Zhou authored
The skb_recv_datagram() in ax25_recvmsg() will hold lock_sock and block until it receives a packet from the remote. If the client doesn`t connect to server and calls read() directly, it will not receive any packets forever. As a result, the deadlock will happen. The fail log caused by deadlock is shown below: [ 369.606973] INFO: task ax25_deadlock:157 blocked for more than 245 seconds. [ 369.608919] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 369.613058] Call Trace: [ 369.613315] <TASK> [ 369.614072] __schedule+0x2f9/0xb20 [ 369.615029] schedule+0x49/0xb0 [ 369.615734] __lock_sock+0x92/0x100 [ 369.616763] ? destroy_sched_domains_rcu+0x20/0x20 [ 369.617941] lock_sock_nested+0x6e/0x70 [ 369.618809] ax25_bind+0xaa/0x210 [ 369.619736] __sys_bind+0xca/0xf0 [ 369.620039] ? do_futex+0xae/0x1b0 [ 369.620387] ? __x64_sys_futex+0x7c/0x1c0 [ 369.620601] ? fpregs_assert_state_consistent+0x19/0x40 [ 369.620613] __x64_sys_bind+0x11/0x20 [ 369.621791] do_syscall_64+0x3b/0x90 [ 369.622423] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 369.623319] RIP: 0033:0x7f43c8aa8af7 [ 369.624301] RSP: 002b:00007f43c8197ef8 EFLAGS: 00000246 ORIG_RAX: 0000000000000031 [ 369.625756] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f43c8aa8af7 [ 369.626724] RDX: 0000000000000010 RSI: 000055768e2021d0 RDI: 0000000000000005 [ 369.628569] RBP: 00007f43c8197f00 R08: 0000000000000011 R09: 00007f43c8198700 [ 369.630208] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff845e6afe [ 369.632240] R13: 00007fff845e6aff R14: 00007f43c8197fc0 R15: 00007f43c8198700 This patch replaces skb_recv_datagram() with an open-coded variant of it releasing the socket lock before the __skb_wait_for_more_packets() call and re-acquiring it after such call in order that other functions that need socket lock could be executed. what's more, the socket lock will be released only when recvmsg() will block and that should produce nicer overall behavior. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Suggested-by:
Thomas Osterried <thomas@osterried.de> Signed-off-by:
Duoming Zhou <duoming@zju.edu.cn> Reported-by: Thomas Habets <thomas@@habets.se> Acked-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
-
Jose Alonso authored
The extra byte inserted by usbnet.c when (length % dev->maxpacket == 0) is causing problems to device. This patch sets FLAG_SEND_ZLP to avoid this. Tested with: 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet Problems observed: ====================================================================== 1) Using ssh/sshfs. The remote sshd daemon can abort with the message: "message authentication code incorrect" This happens because the tcp message sent is corrupted during the USB "Bulk out". The device calculate the tcp checksum and send a valid tcp message to the remote sshd. Then the encryption detects the error and aborts. 2) NETDEV WATCHDOG: ... (ax88179_178a): transmit queue 0 timed out 3) Stop normal work without any log message. The "Bulk in" continue receiving packets normally. The host sends "Bulk out" and the device responds with -ECONNRESET. (The netusb.c code tx_complete ignore -ECONNRESET) Under normal conditions these errors take days to happen and in intense usage take hours. A test with ping gives packet loss, showing that something is wrong: ping -4 -s 462 {destination} # 462 = 512 - 42 - 8 Not all packets fail. My guess is that the device tries to find another packet starting at the extra byte and will fail or not depending on the next bytes (old buffer content). ====================================================================== Signed-off-by:Jose Alonso <joalonsof@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-06-14 This series contains updates to ice driver only. Michal fixes incorrect Tx timestamp offset calculation for E822 devices. Roman enforces required VLAN filtering settings for double VLAN mode. Przemyslaw fixes memory corruption issues with VFs by ensuring queues are disabled in the error path of VF queue configuration and to disabled VFs during reset. ==================== Signed-off-by:
-
