- 20 Mar, 2012 34 commits
-
-
Corentin Chary authored
Signed-off-by:
Corentin Chary <corentin.chary@gmail.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Corentin Chary authored
But don't try to do than on pegatron tablets to avoid any conflict. Signed-off-by:
-
Corentin Chary authored
Let the user tells if BLED and WLED should be exposed as led or rfkill (the old sysfs are still here, but this adds a standard interface to control the device). For example on my A6JC, with WAPF=1, I would do: $ modprobe asus-laptop wled_type=led bluetooth_type=rfkill There is still no known way to automatically guess what BLED and WLED methods will control, it's why user information is needed. A userspace database could do that automatically, and maybe some DMI matching in the driver. Signed-off-by:
-
Corentin Chary authored
Signed-off-by:
Corentin Chary <corentincj@iksaif.net> Signed-off-by:
-
Corentin Chary authored
Signed-off-by:
-
Corentin Chary authored
Signed-off-by:
-
Joe Perches authored
Use pr_warn not pr_warning. Coalesce formats. Argument aligning. Remove superfluous parentheses. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Lee, Chun-Yi <jlee@suse.com> Signed-off-by:
-
Joe Perches authored
Use pr_warn not pr_warning. Coalesce formats. Signed-off-by:
-
Corentin Chary authored
Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Corentin Chary authored
- don't output error when probing features at load - print the SABI signature if samsung_sabi_init() succeed Signed-off-by:
-
Corentin Chary authored
We still need to figure out exactly what each of different fields represent, but they contain at least model and version informations. Signed-off-by:
-
Corentin Chary authored
This enable the driver for everything that look like a laptop and is from vendor "SAMSUNG ELECTRONICS CO., LTD.". Note that laptop supported by samsung-q10 seem to have a different vendor strict. Also remove every log output until we know that we have a SABI interface (except if the driver is forced to load, or debug is enabled). Keeping a whitelist of laptop with a model granularity is something that can't work without close vendor cooperation (and we don't have that). Signed-off-by:
-
Corentin Chary authored
The wireless status get and get commands seems to use one byte per device. First byte is for wlan and third is for bluetooh, we will have to find what the other are for. Signed-off-by:
-
Corentin Chary authored
Signed-off-by:
-
Corentin Chary authored
Signed-off-by:
-
Corentin Chary authored
Signed-off-by:
-
Corentin Chary authored
Signed-off-by:
-
Corentin Chary authored
We can now do the self test using debugfs, so remove the code and keep the debug flag to enable more traces. Signed-off-by:
-
Corentin Chary authored
This allow to call arbitrary sabi commands wihout modifying the driver at all. For example, setting the keyboard backlight brightness to 5 using debugfs interface can be done like that: ; Set the command echo 0x78 > command ; Set the data echo 0x0582 > d0 ; Fill the rest with 0 echo 0 > d1 echo 0 > d2 echo 0 > d3 ; And issue the command cat call Signed-off-by:
-
Corentin Chary authored
* SABI command are on 16 bits, not 8 * SABI can read/write up to 11 byte of data * There is not real difference between "get" and "set" commands, so refactorise the code of both functions Signed-off-by:
-
Corentin Chary authored
Will be usefull later when we will have more platform sysfs files like battery_life_extender or usb_charge. Signed-off-by:
-
Corentin Chary authored
samsung-laptop is not at all related to ACPI, but since this interface is not documented at all, and the driver has to use it at load to understand how it works on the laptop, I think it's a good idea to disable it if a better solution is available. Signed-off-by:
-
Corentin Chary authored
Create _init()/_exit() function for each subsystem, remove the local struct samsung_laptop * and only keep a struct platform_device * that can only be used in samsung_init() and samsung_exit(). Signed-off-by:
-
Corentin Chary authored
Even if this driver can only be loaded once, it is still a good idea to create some kind of context structure. Signed-off-by:
-
Axel Lin authored
This patch converts the drivers in drivers/platform/x86/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Hong Liu <hong.liu@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Cc: Daniel Drake <dsd@laptop.org> Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
-
Borislav Petkov authored
Turn off the following triggered with gcc 4.6.1 on Debian testing: drivers/platform/x86/hdaps.c: In function ‘hdaps_temp2_show’: drivers/platform/x86/hdaps.c:398:16: warning: ‘temp’ may be used uninitialized in this function [-Wuninitialized] drivers/platform/x86/hdaps.c: In function ‘hdaps_temp1_show’: drivers/platform/x86/hdaps.c:385:16: warning: ‘temp’ may be used uninitialized in this function [-Wuninitialized] Cc: Frank Seidel <frank@f-seidel.de> Cc: Matthew Garrett <mjg@redhat.com> Cc: platform-driver-x86@vger.kernel.org Signed-off-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
-
AceLan Kao authored
Add "Vostro 3555", "Inspiron N311z", and "Inspiron M5110" into quirks, so that they could have touchpad LED function work. Signed-off-by:
AceLan Kao <acelan.kao@canonical.com> Signed-off-by:
-
John Hughes authored
Fix scancodes returned by driver to match scancodes used to remap keys. (Before the patch FN/E returned scancode 0x1B, but to remap scancode 0x14 had to be used). The scancodes returned by the sony-laptop driver for function keys did not match the scancodes used to remap keys. Also, since the scancode was sent to the input subsystem after the mapped keysym the /lib/udev/keymap utility was confused about which scancode to report for which keysym. This patch fixes the driver so the correct scancode is shown for each key. It also adds to the documentation a description of where to find the scancodes. Signed-off-by:
John Hughes <john@calva.com> Acked-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
-
Alan Cox authored
All the production devices use the PC compatible version of this device so don't use the SCU interfaces or the SCU firmware interfaces. Delete lots of code and conditional paths Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Dmitry Torokhov authored
Use MODULE_DEVCE_TABLE instead of rolling MODULE_ALIAS by hand. Signed-off-by:
-
Dmitry Torokhov authored
Use MODULE_DEVCE_TABLE instead of rolling MODULE_ALIAS by hand. Signed-off-by:
-
Dmitry Torokhov authored
Use MODULE_DEVCE_TABLE instead of rolling MODULE_ALIAS by hand. Signed-off-by:
-
Marcos Paulo de Souza authored
Signed-off-by:
Marcos Paulo de Souza <marcos.mage@gmail.com> Signed-off-by:
-
Josh Boyer authored
When the keyboard backlight support was originally added, the commit said to default it to on with a 10 second timeout. That actually wasn't the case, as the default value is commented out for the kbd_backlight parameter. Because it is a static variable, it gets set to 0 by default without some other form of initialization. However, it seems the function to set the value wasn't actually called immediately, so whatever state the keyboard was in initially would remain. Then commit df410d52 was introduced during the 2.6.39 timeframe to immediately set whatever value was present (as well as attempt to restore/reset the state on module removal or resume). That seems to have now forced the light off immediately when the module is loaded unless the option kbd_backlight=1 is specified. Let's enable it by default again (for the first time). This should solve https://bugzilla.redhat.com/show_bug.cgi?id=728478Signed-off-by:
Josh Boyer <jwboyer@redhat.com> Acked-by:
Mattia Dongili <malattia@linux.it> Signed-off-by:
-
- 18 Mar, 2012 3 commits
-
-
Linus Torvalds authored
-
Jason Baron authored
Commit 28d82dc1 ("epoll: limit paths") that I did to limit the number of possible wakeup paths in epoll is causing a few applications to longer work (dovecot for one). The original patch is really about limiting the amount of epoll nesting (since epoll fds can be attached to other fds). Thus, we probably can allow an unlimited number of paths of depth 1. My current patch limits it at 1000. And enforce the limits on paths that have a greater depth. This is captured in: https://bugzilla.redhat.com/show_bug.cgi?id=681578Signed-off-by:
Jason Baron <jbaron@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking changes from David Miller: "1) icmp6_dst_alloc() returns NULL instead of ERR_PTR() leading to crashes, particularly during shutdown. Reported by Dave Jones and fixed by Eric Dumazet. 2) hyperv and wimax/i2400m return NETDEV_TX_BUSY when they have already freed the SKB, which causes crashes as to the caller this means requeue the packet. Fixes from Eric Dumazet. 3) usbnet driver doesn't allocate the right amount of headroom on fresh RX SKBs, fix from Eric Dumazet. 4) Fix regression in ip6_mc_find_dev_rcu(), as an RCU lookup it abolutely should not take a reference to 'dev', this leads to leaks. Fix from RonQing Li. 5) Fix netfilter ctnetlink race between delete and timeout expiration. From Pablo Neira Ayuso. 6) Revert SFQ change which causes regressions, specifically queueing to tail can lead to unavoidable flow starvation. From Eric Dumazet. 7) Fix a memory leak and a crash on corrupt firmware files in bnx2x, from Michal Schmidt." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: netfilter: ctnetlink: fix race between delete and timeout expiration ipv6: Don't dev_hold(dev) in ip6_mc_find_dev_rcu. wimax/i2400m: fix erroneous NETDEV_TX_BUSY use net/hyperv: fix erroneous NETDEV_TX_BUSY use net/usbnet: reserve headroom on rx skbs bnx2x: fix memory leak in bnx2x_init_firmware() bnx2x: fix a crash on corrupt firmware file sch_sfq: revert dont put new flow at the end of flows ipv6: fix icmp6_dst_alloc()
-
- 17 Mar, 2012 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools, x86: Build perf on older user-space as well perf tools: Use scnprintf where applicable perf tools: Incorrect use of snprintf results in SEGV
-
Pablo Neira Ayuso authored
Kerin Millar reported hardlockups while running `conntrackd -c' in a busy firewall. That system (with several processors) was acting as backup in a primary-backup setup. After several tries, I found a race condition between the deletion operation of ctnetlink and timeout expiration. This patch fixes this problem. Tested-by:
Kerin Millar <kerframil@gmail.com> Reported-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
RongQing.Li authored
ip6_mc_find_dev_rcu() is called with rcu_read_lock(), so don't need to dev_hold(). With dev_hold(), not corresponding dev_put(), will lead to leak. [ bug introduced in 96b52e61 (ipv6: mcast: RCU conversions) ] Signed-off-by:
RongQing.Li <roy.qing.li@gmail.com> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
