Sowmini Varadhan says:

====================
sunvnet: bug fixes

This patch series has a coding-style fix and a bug fix.

The coding style fix (patch 1) is the extra indentation flagged by
Ben Hutchings:
  http://marc.info/?l=linux-netdev&m=141529243409594&w=2

The bugfix (patch 2) is the following:
when vnet_event_napi() is  called as part of napi_resume
(i.e., continuation of a previous NAPI read that was truncated
due to budget constraints), and then finds no more packets to read,
the code was trying to avoid an additional trip through ldc_rx
as an optimization. However, when this corner case happens, we would
need to reset a number of dring state bits such as rcv_nxt carefully,
which quickly becomes complex and hacky.  The cleaner solution
is to just roll back to vnet_poll, re-enable interrupts and set up
dring state as was done in the pre-NAPI version of the driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

vnet_event_napi() may be called as part of the NAPI ->poll,
to resume reading descriptor rings. When no data is available,
descriptor ring state (e.g., rcv_nxt) needs to be reset
carefully to stay in lock-step with ldc_read(). In the interest
of simplicity, the best way to do this is to return from
vnet_event_napi() when there are no more packets to read.
The next trip through ldc_rx will correctly set up the dring state.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Tested-by: David Stevens <david.stevens@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

remove redundant tab.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hayes Wang says:

====================
r8152: rtl_ops_init modify

Initialize the ops through tp->version. This could skip checking
each VID/PID.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The PIDs are only used in the id table, so the definitions are
unnacessary. Remove them wouldn't have confusion.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace using VID/PID with using tp->version to initialize the ops.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move r8152b_get_version() to the location before rtl_ops_init().
Then, the rtl_ops_init() could use tp->version.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's unused now, just delete it.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 64ce2073 ("[NET]: Make NETDEBUG pure printk wrappers")
originally had these NETDEBUG printks as always emitting.

Commit a2a316fd ("[NET]: Replace CONFIG_NET_DEBUG with sysctl")
added a net_msg_warn sysctl to these NETDEBUG uses.

Convert these NETDEBUG uses to normal pr_info calls.

This changes the output prefix from "ESP: " to include
"IPSec: " for the ipv4 case and "IPv6: " for the ipv6 case.

These output lines are now like the other messages in the files.

Other miscellanea:

Neaten the arithmetic spacing to be consistent with other
arithmetic spacing in the files.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These messages aren't useful as there's a generic dump_stack()
on OOM.

Neaten the comment and if test above the OOM by separating the
assign in if into an allocation then if test.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mv88e6172 is very similar to the mv88e6171.  So extend the
mv88e6171 driver to support it.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes: 4bba3925 ("[PKT_SCHED]: Prefix tc actions with act_")
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shradha Shah says:

====================
sfc: Clean up Siena SR-IOV support in preparation for EF10 SR-IOV support

This patch series provides a base and clean up for the upcoming
EF10 SRIOV patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Also add dummy functions where required to avoid NULL pointer dereference.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Patch in preparation for the upcoming EF10 sriov support.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch series provides a base and cleanup for the
upcoming EF10 SRIOV support.

This patch moves the VF state into siena_nic_data as a basis to
save the VF state based on nic type.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unconditionally pulling 128 bytes into the linear area is not required
for:

- security: Every protocol demux starts with pskb_may_pull() to pull
  frag data into the linear area, if necessary, before looking at
  headers.

- performance: Netback has already grant copied up-to 128 bytes from
  the first slot of a packet into the linear area. The first slot
  normally contain all the IPv4/IPv6 and TCP/UDP headers.

The unconditional pull would often copy frag data unnecessarily.  This
is a performance problem when running on a version of Xen where grant
unmap avoids TLB flushes for pages which are not accessed.  TLB
flushes can now be avoided for > 99% of unmaps (it was 0% before).

Grant unmap TLB flush avoidance will be available in a future version
of Xen (probably 4.6).
Signed-off-by: Malcolm Crossley <malcolm.crossley@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andy Shevchenko says:

====================
stmmac: pci: various cleanups and fixes

There are few cleanups and fixes regarding to stmmac PCI driver.
This has been tested on Intel Galileo board with recent net-next tree.

Since v2:
- drop patch 5/5 since it will be part of a big change across entire subsystem

Since v1:
- remove already applied patch
- append patch 1/5
- rework patch 3/5 to be functional compatible with original code
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of pr_* macros let's use dev_* macros which provide device name.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Migrate pci driver to managed resources to reduce boilerplate error handling
code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert system PM callbacks to use dev_pm_ops. In addition remove the PCI calls
related to a power state since the bus code cares about this already.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The last standard PCI resource is defined as PCI_STD_RESOURCE_END. Thus, we
could use it instead of plain integer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the following sparse warnings.

drivers/net/ethernet/stmicro/stmmac/enh_desc.c:381:30: warning: symbol 'enh_desc_ops' was not declared. Should it be static?
drivers/net/ethernet/stmicro/stmmac/norm_desc.c:253:30: warning: symbol 'ndesc_ops' was not declared. Should it be static?
drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c:141:33: warning: symbol 'stmmac_ptp' was not declared. Should it be static?

There is no functional change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for tunnels with local or
remote wildcard endpoints. With this we get a
NBMA tunnel mode like we have it for ipv4 and
sit tunnels.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently we need the IP6_TNL_F_CAP_XMIT capabiltiy to transmit
packets through an ipv6 tunnel. This capability is set when the
tunnel gets configured, based on the tunnel endpoint addresses.

On tunnels with wildcard tunnel endpoints, we need to do the
capabiltiy checking on a per packet basis like it is done in
the receive path.

This patch extends ip6_tnl_xmit_ctl() to take local and remote
addresses as parameters to allow for per packet capabiltiy
checking.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When filling netlink info, dport is being returned as flags. Fix
instances to return correct value.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Let the tasklet only be enabled after open(), and be disabled for
the other situation. The tasklet is only necessary after open() for
tx/rx, so it could be disabled by default.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It has been reported that generating an MLD listener report on
devices with large MTUs (e.g. 9000) and a high number of IPv6
addresses can trigger a skb_over_panic():

skbuff: skb_over_panic: text:ffffffff80612a5d len:3776 put:20
head:ffff88046d751000 data:ffff88046d751010 tail:0xed0 end:0xec0
dev:port1
 ------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:100!
invalid opcode: 0000 [#1] SMP
Modules linked in: ixgbe(O)
CPU: 3 PID: 0 Comm: swapper/3 Tainted: G O 3.14.23+ #4
[...]
Call Trace:
 <IRQ>
 [<ffffffff80578226>] ? skb_put+0x3a/0x3b
 [<ffffffff80612a5d>] ? add_grhead+0x45/0x8e
 [<ffffffff80612e3a>] ? add_grec+0x394/0x3d4
 [<ffffffff80613222>] ? mld_ifc_timer_expire+0x195/0x20d
 [<ffffffff8061308d>] ? mld_dad_timer_expire+0x45/0x45
 [<ffffffff80255b5d>] ? call_timer_fn.isra.29+0x12/0x68
 [<ffffffff80255d16>] ? run_timer_softirq+0x163/0x182
 [<ffffffff80250e6f>] ? __do_softirq+0xe0/0x21d
 [<ffffffff8025112b>] ? irq_exit+0x4e/0xd3
 [<ffffffff802214bb>] ? smp_apic_timer_interrupt+0x3b/0x46
 [<ffffffff8063f10a>] ? apic_timer_interrupt+0x6a/0x70

mld_newpack() skb allocations are usually requested with dev->mtu
in size, since commit 72e09ad1 ("ipv6: avoid high order allocations")
we have changed the limit in order to be less likely to fail.

However, in MLD/IGMP code, we have some rather ugly AVAILABLE(skb)
macros, which determine if we may end up doing an skb_put() for
adding another record. To avoid possible fragmentation, we check
the skb's tailroom as skb->dev->mtu - skb->len, which is a wrong
assumption as the actual max allocation size can be much smaller.

The IGMP case doesn't have this issue as commit 57e1ab6e
("igmp: refine skb allocations") stores the allocation size in
the cb[].

Set a reserved_tailroom to make it fit into the MTU and use
skb_availroom() helper instead. This also allows to get rid of
igmp_skb_size().
Reported-by: Wei Liu <lw1a2.jing@gmail.com>
Fixes: 72e09ad1 ("ipv6: avoid high order allocations")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: David L Stevens <david.stevens@oracle.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using a single fixed string is smaller code size than using
a format and many string arguments.

Reduces overall code size a little.

$ size net/ipv4/igmp.o* net/ipv6/mcast.o* net/ipv6/ip6_flowlabel.o*
   text	   data	    bss	    dec	    hex	filename
  34269	   7012	  14824	  56105	   db29	net/ipv4/igmp.o.new
  34315	   7012	  14824	  56151	   db57	net/ipv4/igmp.o.old
  30078	   7869	  13200	  51147	   c7cb	net/ipv6/mcast.o.new
  30105	   7869	  13200	  51174	   c7e6	net/ipv6/mcast.o.old
  11434	   3748	   8580	  23762	   5cd2	net/ipv6/ip6_flowlabel.o.new
  11491	   3748	   8580	  23819	   5d0b	net/ipv6/ip6_flowlabel.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

By default the arch_fast_hash hashing function pointers are initialized
to jhash(2). If during boot-up a CPU with SSE4.2 is detected they get
updated to the CRC32 ones. This dispatching scheme incurs a function
pointer lookup and indirect call for every hashing operation.

rhashtable as a user of arch_fast_hash e.g. stores pointers to hashing
functions in its structure, too, causing two indirect branches per
hashing operation.

Using alternative_call we can get away with one of those indirect branches.
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tom Lendacky says:

====================
amd-xgbe: AMD XGBE driver updates 2014-11-04

The following series of patches includes functional updates to the
driver as well as some trivial changes for function renaming and
spelling fixes.

- Move channel and ring structure allocation into the device open path
- Rename the pre_xmit function to dev_xmit
- Explicitly use the u32 data type for the device descriptors
- Use page allocation for the receive buffers
- Add support for split header/payload receive
- Add support for per DMA channel interrupts
- Add support for receive side scaling (RSS)
- Add support for ethtool receive side scaling commands
- Fix the spelling of descriptors
- After a PCS reset, sync the PCS and PHY modes
- Add dependency on HAS_IOMEM to both the amd-xgbe and amd-xgbe-phy
  drivers

This patch series is based on net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The amd-xgbe-phy driver needs to perform ioremap calls, so add HAS_IOMEM
to its build dependency.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The amd-xgbe driver needs to perform ioremap calls, so add HAS_IOMEM
to its build dependency.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support to sync the states of the PCS and the PHY
after a reset is performed.  If the PCS and the PHY are not in the
same state after reset an extra mode change would be performed. This
extra mode change might not be needed if the PCS and the PHY are
synced up after reset.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the spelling of the word "descriptor" in a couple
of locations.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for ethtool receive side scaling (RSS) commands.
Support is added to get/set the RSS hash key and the RSS lookup table.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch provides support for receive side scaling (RSS). RSS allows
for spreading incoming network packets across the Rx queues.  When used
in conjunction with the per DMA channel interrupt support, this allows
the receive processing to be spread across multiple processors.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch provides support for interrupts that are generated by the
Tx/Rx DMA channel pairs of the device.  This allows for Tx and Rx
processing to run across multiple processsors.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Provide support for splitting IP packets so that the header and
payload can be sent to different DMA addresses.  This will allow
the IP header to be put into the linear part of the skb while the
payload can be added as frags.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use page allocations for Rx buffers instead of pre-allocating skbs
of a set size.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>