- 10 Jan, 2023 10 commits
-
-
Uwe Kleine-König authored
The listed address doesn't work any more: puck.chen@hisilicon.com host mx5.hisilicon.com [124.71.93.234] SMTP error from remote mail server after RCPT TO:<puck.chen@hisilicon.com>: 551 5.1.1 <puck.chen@hisilicon.com>: Recipient address rejected: Failed recipient validation check.: host 127.0.0.1[127.0.0.1] said: 554 5.7.1 recipient verify from ldap failed (in reply to RCPT TO command) Signed-off-by:Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Signed-off-by:
-
Uwe Kleine-König authored
While working on a drm driver that doesn't need the i2c algobit stuff I noticed that DRM selects this code even though only 8 drivers actually use it. While also only some drivers use i2c, keep the select for I2C for the next cleanup patch. Still prepare this already by also selecting I2C for the individual drivers. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
Ignoring errors from devm_clk_get() is wrong. To handle not all platforms having an axi clk use devm_clk_get_optional() instead and do proper error handling. Also the clk API handles NULL as a dummy clk (which is also returned by devm_clk_get_optional() if there is no clk) so there is no need to check for NULL before calling clk_prepare_enable() or its counter part. Signed-off-by:
-
Marek Szyprowski authored
devm_regulator_get_enable_optional() function returns 0 on success, so use it for the check if function succeeded instead of the -ENODEV value. Fixes: 429e8706 ("drm/meson: dw-hdmi: Use devm_regulator_*get_enable*()") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Acked-by:
Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
- 09 Jan, 2023 17 commits
-
-
Neil Armstrong authored
Add support for the 1080x2400 Visionox VTDR6130 AMOLED DSI panel found on the Qualcomm SM8550 MTP board. By default the the panel is configured to work with DSI compressed streams, but can work in uncompressed video mode since 1080x2400 in RGB888 fits in the 4 DSI lanes bandwidth. While display compression is preferred for performance and power reasons, let's start with the uncompressed video mode support and add the DSC support later on. Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Neil Armstrong authored
Document the 1080x2400 Visionox VTDR6130 AMOLED DSI Panel bindings. Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Mateusz Kwiatkowski authored
The VEC is able to output progressive analog modes, but the driver has never set the proper bit to do so. Signed-off-by:
Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-15-1f8e0770798b@cerno.techSigned-off-by:
Maxime Ripard <maxime@cerno.tech>
-
Dave Stevenson authored
The back porch timings were correct, only the sync offset was wrong. Correct timing is now reported for 1080i and 576i, but the h offset is incorrect for 480i for non-obvious reasons. Fixes: fb10dc45 ("drm/vc4: hdmi: Correct HDMI timing registers for interlaced modes") Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-14-1f8e0770798b@cerno.techSigned-off-by:
-
Mateusz Kwiatkowski authored
This commit fixes vertical timings of the VEC (composite output) modes to accurately represent the 525-line ("NTSC") and 625-line ("PAL") ITU-R standards. Previous timings were actually defined as 502 and 601 lines, resulting in non-standard 62.69 Hz and 52 Hz signals being generated, respectively. Changes to vc4_crtc.c have also been made, to make the PixelValve vertical timings accurately correspond to the DRM modeline in interlaced modes. The resulting VERTA/VERTB register values have been verified against the reference values set by the Raspberry Pi firmware. Signed-off-by: -
Dave Stevenson authored
The HVS_PIXEL_ORDER_xxx defines apply to specific HVS_PIXEL_FORMAT_xxx modes, so add comments to make this obvious. Signed-off-by:
-
Dave Stevenson authored
The hardware supports the 332 8bpp and 4:4:4:4 16bpp formats, but the table of supported formats didn't include them. Add them in. In theory they are supported for T-format as well as linear, but without a way to test them just add them as linear for now. Signed-off-by:
-
Dave Stevenson authored
pixel_order is used for the earlier versions of the HVS, so is redundant on the 10:10:10:2 and 10bit YUV formats that are only supported on HVS5. Remove the assignment from the table to avoid confusion. Signed-off-by:
-
Dave Stevenson authored
vc4_plane_mode_set for HVS5 was using pixel_order unless pixel_order_hvs5 was non-zero, except 0 is a valid value for the pixel_order. Specify pixel_order_hvs5 for all formats and remove the conditional. Signed-off-by:
-
Maxime Ripard authored
atomic_flush will be called for each CRTC even if they aren't enabled. The whole code we have there will thus run without a properly affected channel, which can then result in all sorts of weird behaviour. Reviewed-by:
-
Dave Stevenson authored
HVS5 supports the 210101010 RGB[A|X] formats, but they were missing from the DRM to HVS mapping list, so weren't available. Add them in. Signed-off-by:
-
Dave Stevenson authored
Same as the xRGB8888 formats, HVS5 has managed to swap the colour channels for the xRGB1555 formats as well. Add the relevant config for pixel_order_hvs5. Fixes: c54619b0 ("drm/vc4: Add support for the BCM2711 HVS5") Signed-off-by:
-
Dave Stevenson authored
Adds the zpos property to all planes, and creates the dlist by placing the fragments in the correct order based on zpos. Signed-off-by:
-
Dave Stevenson authored
HVS5 has moved the interrupt enable bits around within the DISPCTRL register, therefore the configuration has to be updated to account for this. Fixes: c54619b0 ("drm/vc4: Add support for the BCM2711 HVS5") Signed-off-by:
-
Dave Stevenson authored
The bit used for SCALER_DISPBKGND_AUTOHS in SCALER_DISPBKGNDX has been repurposed on HVS5 to configure whether a display can win back-to-back arbitration wins for the COB. This is not desirable, therefore only select this bit on HVS4, and explicitly clear it on HVS5. Fixes: c54619b0 ("drm/vc4: Add support for the BCM2711 HVS5") Signed-off-by:
-
Dave Stevenson authored
The HVS can change AXI request mode based on how full the COB FIFOs are. Until now the vc4 driver has been relying on the firmware to have set these to sensible values. With HVS channel 2 now being used for live video, change the panic mode for all channels to be explicitly set by the driver, and the same for all channels. Fixes: c54619b0 ("drm/vc4: Add support for the BCM2711 HVS5") Signed-off-by:
-
Dave Stevenson authored
The HVS Composite Output Buffer (COB) is the memory used to generate the output pixel data. Until now the vc4 driver has been relying on the firmware to have set these to sensible values. In testing triple screen support it has been noted that only 1 line was being assigned to HVS channel 2. Whilst that is fine for the transposer (TXP), and indeed needed as only some pixels have an alpha channel, it is insufficient to run a live display. Split the COB more evenly between the 3 HVS channels. Fixes: c54619b0 ("drm/vc4: Add support for the BCM2711 HVS5") Signed-off-by:
-
- 07 Jan, 2023 2 commits
-
-
Javier Martinez Canillas authored
Many panel drivers define dsi_dcs_write_seq() and dsi_generic_write_seq() macros to send DCS commands and generic write packets respectively, with the payload specified as a list of parameters instead of using arrays. There's already a macro for the former, introduced by commit 2a9e9daf ("drm/mipi-dsi: Introduce mipi_dsi_dcs_write_seq macro") so drivers can be changed to use that. But there isn't one yet for the latter, let's add it. Signed-off-by:
-
Javier Martinez Canillas authored
Change made using a `clang-format -i include/drm/drm_mipi_dsi.h` command. Suggested-by:
-
- 06 Jan, 2023 3 commits
-
-
Maíra Canal authored
Replace the use of drm_debugfs_create_files() with the new drm_debugfs_add_files() function, which center the debugfs files management on the drm_device instead of drm_minor. Moreover, remove the debugfs_init hook and add the debugfs files directly on hdlcd_drm_bind(), before drm_dev_register(). Signed-off-by:
Maíra Canal <mcanal@igalia.com> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20221226155029.244355-4-mcanal@igalia.com
-
Maíra Canal authored
Replace the use of drm_debugfs_create_files() with the new drm_debugfs_add_file() function, which center the debugfs files management on the drm_device instead of drm_minor. Moreover, remove the debugfs_init hook and add the debugfs files directly on gud_probe(), before drm_dev_register(). Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
-
Thomas Zimmermann authored
Replace the combination of bpp and depth with a single color-mode argument. Handle special cases in simpledrm and ofdrm. Hard-code XRGB8888 as fallback format for cases where no given format works. The color-mode argument accepts the same values as the kernel's video parameter. These are mostly bpp values between 1 and 32. The exceptions are 15, which has a color depth of 15 and a bpp value of 16; and 32, which has a color depth of 24 and a bpp value of 32. v4: * add back lost test for bpp_specified (Maira) * add Fixes tag (Daniel) v3: * fix ofdrm build (Maxime) v2: * minimize changes (Daniel) * use drm_driver_legacy_fb_format() (Daniel) Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Maíra Canal <mcanal@igalia.com> # vc4 and vkms Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Fixes: 37c90d58 ("drm/fb-helper: Fix single-probe color-format selection") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230106112324.22055-1-tzimmermann@suse.de
-
- 05 Jan, 2023 8 commits
-
-
Dmitry Baryshkov authored
Now as all drivers stopped calling drm_bridge_connector_enable_hpd() and drm_bridge_connector_disable_hpd() it is safe to remove them complelely. Rename our internal helpers to remove the underscore prefix. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by:
-
Dmitry Baryshkov authored
The functionality of drm_bridge_connector_enable_hpd() and drm_bridge_connector_disable_hpd() is provided automatically by the drm_kms_poll helpers. Stop calling these functions manually. Signed-off-by:
-
Dmitry Baryshkov authored
The functionality of drm_bridge_connector_enable_hpd() and drm_bridge_connector_disable_hpd() is provided automatically by the drm_kms_poll helpers. Stop calling these functions manually. Signed-off-by:
-
Dmitry Baryshkov authored
The functionality of drm_bridge_connector_enable_hpd() and drm_bridge_connector_disable_hpd() is provided automatically by the drm_kms_poll helpers. Stop calling these functions manually. Signed-off-by:
-
Dmitry Baryshkov authored
Use drm_connector's helpers enable_hpd and disable_hpd to enable and disable HPD automatically by the means of drm_kms_helper_poll_* functions. As the drm_bridge_connector_enable_hpd() and drm_bridge_connector_disable_hpd() functions are now unused, replace them with stubs to ease driver migration. Enabling the HPD from drm_bridge_connector_init() can happen too early, before the driver is prepared to handle HPD events. As the drm_bridge_connector_enable_hpd() is empty anyway, drop this call anyway. Signed-off-by:
-
Dmitry Baryshkov authored
Introduce two drm_connector_helper_funcs: enable_hpd() and disable_hpd(). They are called by drm_kms_helper_poll_enable() and drm_kms_helper_poll_disable() (and thus drm_kms_helper_poll_init() and drm_kms_helper_poll_fini()) respectively. This allows DRM drivers to rely on drm_kms_helper_poll for enabling and disabling HPD detection rather than doing that manually. Signed-off-by:
-
Dmitry Baryshkov authored
Merge drm_kms_helper_poll_disable() and drm_kms_helper_poll_fini() code into a common helper function. Signed-off-by:
-
Daniel Vetter authored
It's a bit a FAQ, and we really can't claim to be the authoritative source for allocating these numbers used in many standard extensions if we tell closed source or vendor stacks in general to go away. Iirc this was already clarified in some vulkan discussions, but I can't find that anywhere anymore. At least not in a public link. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Daniel Stone <daniel@fooishbar.org> Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Neil Trevett <ntrevett@nvidia.com> Acked-by:
Daniel Stone <daniels@collabora.com> Acked-by:
David Airlie <airlied@gmail.com> Acked-by:
Marek Olšák <maraeo@gmail.com> Acked-by:
Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Acked-by:
Jason Ekstrand <jason.ekstrand@collabora.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221123192437.1065826-1-daniel.vetter@ffwll.ch
-
