- 25 Apr, 2013 20 commits
-
-
Shan Hai authored
commit d8668fcb upstream. The function returns type of ATAPI drives so it should return integer value. The commit 4dce8ba9 (libata: Use 'bool' return value for ata_id_XXX) since v2.6.39 changed the type of return value from int to bool, the change would cause all of the ATAPI class drives to be treated as TYPE_TAPE and the max_sectors of the drives to be set to 65535 because of the commit f8d8e579(libata: increase 128 KB / cmd limit for ATAPI tape drives), for the function would return true for all ATAPI class drives and the TYPE_TAPE is defined as 0x01. Signed-off-by:
Shan Hai <shan.hai@windriver.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Tim Gardner authored
commit 83589b30 upstream. BugLink: http://bugs.launchpad.net/bugs/1128840 It appears that when this register read fails it never recovers, so I think there is no need to repeat the same error message ad infinitum. Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: users@rt2x00.serialmonkey.com Cc: netdev@vger.kernel.org Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Jussi Kivilinna authored
commit d3dde522 upstream. rfc4543(gcm(*)) code for GMAC assumes that assoc scatterlist always contains only one segment and only makes use of this first segment. However ipsec passes assoc with three segments when using 'extended sequence number' thus in this case rfc4543(gcm(*)) fails to function correctly. Patch fixes this issue. Reported-by:
Chaoxing Lin <Chaoxing.Lin@ultra-3eti.com> Tested-by:
Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Michael Bohan authored
commit 84cc8fd2 upstream. The current code makes the assumption that a cpu_base lock won't be held if the CPU corresponding to that cpu_base is offline, which isn't always true. If a hrtimer is not queued, then it will not be migrated by migrate_hrtimers() when a CPU is offlined. Therefore, the hrtimer's cpu_base may still point to a CPU which has subsequently gone offline if the timer wasn't enqueued at the time the CPU went down. Normally this wouldn't be a problem, but a cpu_base's lock is blindly reinitialized each time a CPU is brought up. If a CPU is brought online during the period that another thread is performing a hrtimer operation on a stale hrtimer, then the lock will be reinitialized under its feet, and a SPIN_BUG() like the following will be observed: <0>[ 28.082085] BUG: spinlock already unlocked on CPU#0, swapper/0/0 <0>[ 28.087078] lock: 0xc4780b40, value 0x0 .magic: dead4ead, .owner: <none>/-1, .owner_cpu: -1 <4>[ 42.451150] [<c0014398>] (unwind_backtrace+0x0/0x120) from [<c0269220>] (do_raw_spin_unlock+0x44/0xdc) <4>[ 42.460430] [<c0269220>] (do_raw_spin_unlock+0x44/0xdc) from [<c071b5bc>] (_raw_spin_unlock+0x8/0x30) <4>[ 42.469632] [<c071b5bc>] (_raw_spin_unlock+0x8/0x30) from [<c00a9ce0>] (__hrtimer_start_range_ns+0x1e4/0x4f8) <4>[ 42.479521] [<c00a9ce0>] (__hrtimer_start_range_ns+0x1e4/0x4f8) from [<c00aa014>] (hrtimer_start+0x20/0x28) <4>[ 42.489247] [<c00aa014>] (hrtimer_start+0x20/0x28) from [<c00e6190>] (rcu_idle_enter_common+0x1ac/0x320) <4>[ 42.498709] [<c00e6190>] (rcu_idle_enter_common+0x1ac/0x320) from [<c00e6440>] (rcu_idle_enter+0xa0/0xb8) <4>[ 42.508259] [<c00e6440>] (rcu_idle_enter+0xa0/0xb8) from [<c000f268>] (cpu_idle+0x24/0xf0) <4>[ 42.516503] [<c000f268>] (cpu_idle+0x24/0xf0) from [<c06ed3c0>] (rest_init+0x88/0xa0) <4>[ 42.524319] [<c06ed3c0>] (rest_init+0x88/0xa0) from [<c0c00978>] (start_kernel+0x3d0/0x434) As an example, this particular crash occurred when hrtimer_start() was executed on CPU #0. The code locked the hrtimer's current cpu_base corresponding to CPU #1. CPU #0 then tried to switch the hrtimer's cpu_base to an optimal CPU which was online. In this case, it selected the cpu_base corresponding to CPU #3. Before it could proceed, CPU #1 came online and reinitialized the spinlock corresponding to its cpu_base. Thus now CPU #0 held a lock which was reinitialized. When CPU #0 finally ended up unlocking the old cpu_base corresponding to CPU #1 so that it could switch to CPU #3, we hit this SPIN_BUG() above while in switch_hrtimer_base(). CPU #0 CPU #1 ---- ---- ... <offline> hrtimer_start() lock_hrtimer_base(base #1) ... init_hrtimers_cpu() switch_hrtimer_base() ... ... raw_spin_lock_init(&cpu_base->lock) raw_spin_unlock(&cpu_base->lock) ... <spin_bug> Solve this by statically initializing the lock. Signed-off-by:
Michael Bohan <mbohan@codeaurora.org> Link: http://lkml.kernel.org/r/1363745965-23475-1-git-send-email-mbohan@codeaurora.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Johan Hovold authored
commit fc98ab87 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Johan Hovold authored
commit 43a66b4c upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit dbcea761 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit 40509ca9 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit 8edfdab3 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit a14430db upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit e670c6af upstream. Make sure waiting processes are woken on modem-status changes. Currently processes are only woken on termios changes regardless of whether the modem status has changed. Signed-off-by:
-
Johan Hovold authored
commit cf1d2444 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit 7b245969 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit 33357625 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit 71ccb9b0 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. When switching to tty ports, some lifetime assumptions were changed. Specifically, close can now be called before the final tty reference is dropped as part of hangup at device disconnect. Even with the ftdi private-data refcounting this means that the port private data can be freed while a process is sleeping on modem-status changes and thus cannot be relied on to detect disconnects when woken up. Signed-off-by:
-
Johan Hovold authored
commit 356050d8 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Also remove bogus test for private data pointer being NULL as it is never assigned in the loop. Signed-off-by:
-
Johan Hovold authored
commit fa1e11d5 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit 50188603 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Ming Lei authored
commit eba0e3c3 upstream. Johan's 'fix use-after-free in TIOCMIWAIT' patchset[1] introduces one bug which can cause kernel hang when opening port. This patch initialized the 'port->delta_msr_wait' waitqueue head to fix the bug which is introduced in 3.9-rc4. [1], http://marc.info/?l=linux-usb&m=136368139627876&w=2Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Acked-by:
-
Johan Hovold authored
commit e5b33dc9 upstream. Add modem-status-change wait queue to struct usb_serial_port that subdrivers can use to implement TIOCMIWAIT. Currently subdrivers use a private wait queue which may have been released when waking up after device disconnected. Note that we're adding a new wait queue rather than reusing the tty-port one as we do not want to get woken up at hangup (yet). Signed-off-by:
-
- 10 Apr, 2013 20 commits
-
-
Ben Hutchings authored
-
Jiri Slaby authored
commit 6b90466c upstream. In patch "HID: microsoft: fix invalid rdesc for 3k kbd" I fixed support for MS 3k keyboards. However the added check using memcmp and a compound statement breaks build on architectures where memcmp is a macro with parameters. hid-microsoft.c:51:18: error: macro "memcmp" passed 6 arguments, but takes just 3 On x86_64, memcmp is a function, so I did not see the error. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Veaceslav Falico authored
commit fcd99434 upstream. Now that netdev_rx_handler_unregister contains synchronize_net(), we need to call it outside of bond->lock, cause it might sleep. Also, remove the already unneded synchronize_net(). Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Steve Glendinning authored
[ Upstream commit 4c51e536 ] This patch enables RX of jumbo frames for LAN7500. Previously the driver would transmit jumbo frames succesfully but would drop received jumbo frames (incrementing the interface errors count). With this patch applied the device can succesfully receive jumbo frames up to MTU 9000 (9014 bytes on the wire including ethernet header). Signed-off-by:
Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by:
-
Veaceslav Falico authored
[ Upstream commit 76a0e681 ] skb->ip_summed should be CHECKSUM_UNNECESSARY when the driver reports that checksums were correct and CHECKSUM_NONE in any other case. They're currently placed vice versa, which breaks the forwarding scenario. Fix it by placing them as described above. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 00cfec37 ] commit 35d48903 (bonding: fix rx_handler locking) added a race in bonding driver, reported by Steven Rostedt who did a very good diagnosis : <quoting Steven> I'm currently debugging a crash in an old 3.0-rt kernel that one of our customers is seeing. The bug happens with a stress test that loads and unloads the bonding module in a loop (I don't know all the details as I'm not the one that is directly interacting with the customer). But the bug looks to be something that may still be present and possibly present in mainline too. It will just be much harder to trigger it in mainline. In -rt, interrupts are threads, and can schedule in and out just like any other thread. Note, mainline now supports interrupt threads so this may be easily reproducible in mainline as well. I don't have the ability to tell the customer to try mainline or other kernels, so my hands are somewhat tied to what I can do. But according to a core dump, I tracked down that the eth irq thread crashed in bond_handle_frame() here: slave = bond_slave_get_rcu(skb->dev); bond = slave->bond; <--- BUG the slave returned was NULL and accessing slave->bond caused a NULL pointer dereference. Looking at the code that unregisters the handler: void netdev_rx_handler_unregister(struct net_device *dev) { ASSERT_RTNL(); RCU_INIT_POINTER(dev->rx_handler, NULL); RCU_INIT_POINTER(dev->rx_handler_data, NULL); } Which is basically: dev->rx_handler = NULL; dev->rx_handler_data = NULL; And looking at __netif_receive_skb() we have: rx_handler = rcu_dereference(skb->dev->rx_handler); if (rx_handler) { if (pt_prev) { ret = deliver_skb(skb, pt_prev, orig_dev); pt_prev = NULL; } switch (rx_handler(&skb)) { My question to all of you is, what stops this interrupt from happening while the bonding module is unloading? What happens if the interrupt triggers and we have this: CPU0 CPU1 ---- ---- rx_handler = skb->dev->rx_handler netdev_rx_handler_unregister() { dev->rx_handler = NULL; dev->rx_handler_data = NULL; rx_handler() bond_handle_frame() { slave = skb->dev->rx_handler; bond = slave->bond; <-- NULL pointer dereference!!! What protection am I missing in the bond release handler that would prevent the above from happening? </quoting Steven> We can fix bug this in two ways. First is adding a test in bond_handle_frame() and others to check if rx_handler_data is NULL. A second way is adding a synchronize_net() in netdev_rx_handler_unregister() to make sure that a rcu protected reader has the guarantee to see a non NULL rx_handler_data. The second way is better as it avoids an extra test in fast path. Reported-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Max.Nekludov@us.elster.com authored
[ Upstream commit 14bc435e ] According to the Datasheet (page 52): 15-12 Reserved 11-0 RXBC Receive Byte Count This field indicates the present received frame byte size. The code has a bug: rxh = ks8851_rdreg32(ks, KS_RXFHSR); rxstat = rxh & 0xffff; rxlen = rxh >> 16; // BUG!!! 0xFFF mask should be applied Signed-off-by:
Max Nekludov <Max.Nekludov@us.elster.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 1c4a154e ] Erik Hugne's errata proposal (Errata ID: 3480) to RFC4291 has been verified: http://www.rfc-editor.org/errata_search.php?eid=3480 We have to check for pkt_type and loopback flag because either the packets are allowed to travel over the loopback interface (in which case pkt_type is PACKET_HOST and IFF_LOOPBACK flag is set) or they travel over a non-loopback interface back to us (in which case PACKET_TYPE is PACKET_LOOPBACK and IFF_LOOPBACK flag is not set). Cc: Erik Hugne <erik.hugne@ericsson.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Hong Zhiguo authored
[ Upstream commit a79ca223 ] Signed-off-by:
Hong Zhiguo <honkiko@gmail.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 20314092 ] v2: a) moved before multicast source address check b) changed comment to netdev style Cc: Erik Hugne <erik.hugne@ericsson.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Joseph CHANG authored
[ Upstream commit 6741f40d ] Fix bug for DM9000 revision B which contain a DSP PHY DM9000B use DSP PHY instead previouse DM9000 revisions' analog PHY, So need extra change in initialization, For explicity PHY Reset and PHY init parameter, and first DM9000_NCR reset need NCR_MAC_LBK bit by dm9000_probe(). Following DM9000_NCR reset cause by dm9000_open() clear the NCR_MAC_LBK bit. Without this fix, Power-up FIFO pointers error happen around 2% rate among Davicom's customers' boards. With this fix, All above cases can be solved. Signed-off-by:
Joseph CHANG <josright123@gmail.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 188ab1b1 ] Usage of pci-msi results in corrupted dma packet transfers to the host. Reported-by:
rebelyouth <rebelyouth.hacklab@gmail.com> Cc: Huang, Xiong <xiong@qca.qualcomm.com> Tested-by:
Christian Sünkenberg <christian.suenkenberg@student.kit.edu> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 91c57464 ] Some network drivers use a non default hard_header_len Transmitted skb should take into account dev->hard_header_len, or risk crashes or expensive reallocations. In the case of aoe, lets reserve MAX_HEADER bytes. David reported a crash in defxx driver, solved by this patch. Reported-by:
David Oostdyk <daveo@ll.mit.edu> Tested-by:
-
Mugunthan V N authored
commit 7e51cde2 upstream. To restart tx queue use netif_wake_queue() intead of netif_start_queue() so that net schedule will restart transmission immediately which will increase network performance while doing huge data transfers. Reported-by:
Dan Franke <dan.franke@schneider-electric.com> Suggested-by:
Sriramakrishnan A G <srk@ti.com> Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Acked-by:
-
nikolay@redhat.com authored
[ Upstream commit 1bc7db16 ] Currently if either arp_interval or miimon is disabled, they both get disabled, and upon disabling they get executed once more which is not the proper behaviour. Also when doing a no-op and disabling an already disabled one, the other again gets disabled. Also fix the error messages with the proper valid ranges, and a small typo fix in the up delay error message (outputting "down delay", instead of "up delay"). Signed-off-by:
Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by:
-
Veaceslav Falico authored
[ Upstream commit 9fe16b78 ] If slave sysfs symlink failes to be created - we end up without removing the master sysfs symlink. Remove it in case of failure. Signed-off-by:
-
Paul Moore authored
[ Upstream commit ded34e0f ] As reported by Jan, and others over the past few years, there is a race condition caused by unix_release setting the sock->sk pointer to NULL before properly marking the socket as dead/orphaned. This can cause a problem with the LSM hook security_unix_may_send() if there is another socket attempting to write to this partially released socket in between when sock->sk is set to NULL and it is marked as dead/orphaned. This patch fixes this by only setting sock->sk to NULL after the socket has been marked as dead; I also take the opportunity to make unix_release_sock() a void function as it only ever returned 0/success. Dave, I think this one should go on the -stable pile. Special thanks to Jan for coming up with a reproducer for this problem. Reported-by:
Jan Stancek <jan.stancek@gmail.com> Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
nikolay@redhat.com authored
[ Upstream commit fbb0c41b ] First I would give three observations which will be used later. Observation 1: if (delayed_work_pending(wq)) cancel_delayed_work(wq) This usage is wrong because the pending bit is cleared just before the work's fn is executed and if the function re-arms itself we might end up with the work still running. It's safe to call cancel_delayed_work_sync() even if the work is not queued at all. Observation 2: Use of INIT_DELAYED_WORK() Work needs to be initialized only once prior to (de/en)queueing. Observation 3: IFF_UP is set only after ndo_open is called Related race conditions: 1. Race between bonding_store_miimon() and bonding_store_arp_interval() Because of Obs.1 we can end up having both works enqueued. 2. Multiple races with INIT_DELAYED_WORK() Since the works are not protected by anything between INIT_DELAYED_WORK() and calls to (en/de)queue it is possible for races between the following functions: (races are also possible between the calls to INIT_DELAYED_WORK() and workqueue code) bonding_store_miimon() - bonding_store_arp_interval(), bond_close(), bond_open(), enqueued functions bonding_store_arp_interval() - bonding_store_miimon(), bond_close(), bond_open(), enqueued functions 3. By Obs.1 we need to change bond_cancel_all() Bugs 1 and 2 are fixed by moving all work initializations in bond_open which by Obs. 2 and Obs. 3 and the fact that we make sure that all works are cancelled in bond_close(), is guaranteed not to have any work enqueued. Also RTNL lock is now acquired in bonding_store_miimon/arp_interval so they can't race with bond_close and bond_open. The opposing work is cancelled only if the IFF_UP flag is set and it is cancelled unconditionally. The opposing work is already cancelled if the interface is down so no need to cancel it again. This way we don't need new synchronizations for the bonding workqueue. These bugs (and fixes) are tied together and belong in the same patch. Note: I have left 1 line intentionally over 80 characters (84) because I didn't like how it looks broken down. If you'd prefer it otherwise, then simply break it. v2: Make description text < 75 columns Signed-off-by:
Jay Vosburgh <fubar@us.ibm.com> Signed-off-by:
-
Masatake YAMATO authored
[ Upstream commits 73214f5d and f1e79e20, the latter adds an assertion to genetlink to prevent this from happening again in the future. ] The original name is too long. Signed-off-by:
Masatake YAMATO <yamato@redhat.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 4a7df340 ] vlan_vid_del() could possibly free ->vlan_info after a RCU grace period, however, we may still refer to the freed memory area by 'grp' pointer. Found by code inspection. This patch moves vlan_vid_del() as behind as possible. Cc: Patrick McHardy <kaber@trash.net> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Cong Wang <amwang@redhat.com> Acked-by:
-
