- 03 Mar, 2022 8 commits
-
-
Christoph Hellwig authored
ZONE_DEVICE struct pages have an extra reference count that complicates the code for put_page() and several places in the kernel that need to check the reference count to see that a page is not being used (gup, compaction, migration, etc.). Clean up the code so the reference count doesn't need to be treated specially for ZONE_DEVICE pages. Note that this excludes the special idle page wakeup for fsdax pages, which still happens at refcount 1. This is a separate issue and will be sorted out later. Given that only fsdax pages require the notifiacation when the refcount hits 1 now, the PAGEMAP_OPS Kconfig symbol can go away and be replaced with a FS_DAX check for this hook in the put_page fastpath. Based on an earlier patch from Ralph Campbell <rcampbell@nvidia.com>. Link: https://lkml.kernel.org/r/20220210072828.2930359-8-hch@lst.deSigned-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Logan Gunthorpe <logang@deltatee.com> Reviewed-by:
Ralph Campbell <rcampbell@nvidia.com> Reviewed-by:
Jason Gunthorpe <jgg@nvidia.com> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Acked-by:
Felix Kuehling <Felix.Kuehling@amd.com> Tested-by:
"Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Chaitanya Kulkarni <kch@nvidia.com> Cc: Christian Knig <christian.koenig@amd.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org>
-
Christoph Hellwig authored
Move the check for the actual pgmap types that need the free at refcount one behavior into the out of line helper, and thus avoid the need to pull memremap.h into mm.h. Link: https://lkml.kernel.org/r/20220210072828.2930359-7-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
Make put_devmap_managed_page return if it took charge of the page or not and remove the separate page_is_devmap_managed helper. Link: https://lkml.kernel.org/r/20220210072828.2930359-6-hch@lst.deSigned-off-by:
Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by:
-
Christoph Hellwig authored
free_devmap_managed_page has nothing to do with the code in swap.c, move it to live with the rest of the code for devmap handling. Link: https://lkml.kernel.org/r/20220210072828.2930359-5-hch@lst.deSigned-off-by:
Muchun Song <songmuchun@bytedance.com> Reviewed-by:
-
Christoph Hellwig authored
hmm.h pulls in the world for no good reason at all. Remove the includes and push a few ones into the users instead. Link: https://lkml.kernel.org/r/20220210072828.2930359-4-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
__KERNEL__ ifdefs don't make sense outside of include/uapi/. Link: https://lkml.kernel.org/r/20220210072828.2930359-3-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
Patch series "start sorting out the ZONE_DEVICE refcount mess", v2. This series removes the offset by one refcount for ZONE_DEVICE pages that are freed back to the driver owning them, which is just device private ones for now, but also the planned device coherent pages and the ehanced p2p ones pending. It does not address the fsdax pages yet, which will be attacked in a follow on series. This patch (of 27): memremap.c is only built when CONFIG_ZONE_DEVICE is set, so remove the superflous extra check. Link: https://lkml.kernel.org/r/20220210072828.2930359-1-hch@lst.de Link: https://lkml.kernel.org/r/20220210072828.2930359-2-hch@lst.deSigned-off-by:
Miaohe Lin <linmiaohe@huawei.com> Tested-by:
-
Hugh Dickins authored
Although mmap_region() and mlock_fixup() take care that VM_LOCKED is never left set on a VM_SPECIAL vma, there is an interval while file->f_op->mmap() is using vm_insert_page(s), when VM_LOCKED may still be set while VM_SPECIAL bits are added: so mlock_vma_page() should ignore VM_LOCKED while any VM_SPECIAL bits are set. This showed up as a "Bad page" still mlocked, when vfree()ing pages which had been vm_inserted by remap_vmalloc_range_partial(): while release_pages() and __page_cache_release(), and so put_page(), catch pages still mlocked when freeing (and clear_page_mlock() caught them when unmapping), the vfree() path is unprepared for them: fix it? but these pages should not have been mlocked in the first place. I assume that an mlockall(MCL_FUTURE) had been done in the past; or maybe the user got to specify MAP_LOCKED on a vmalloc'ing driver mmap. Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
- 17 Feb, 2022 13 commits
-
-
Hugh Dickins authored
4.8 commit 7751b2da ("vmscan: split file huge pages before paging them out") inserted a split_huge_page_to_list() into shrink_page_list() without considering the mlock case: no problem if the page has already been marked as Mlocked (the !page_evictable check much higher up will have skipped all this), but it has always been the case that races or omissions in setting Mlocked can rely on page reclaim to detect this and correct it before actually reclaiming - and that remains so, but what a shame if a hugepage is needlessly split before discovering it. It is surprising that page_check_references() returns PAGEREF_RECLAIM when VM_LOCKED, but there was a good reason for that: try_to_unmap_one() is where the condition is detected and corrected; and until now it could not be done in page_referenced_one(), because that does not always have the page locked. Now that mlock's requirement for page lock has gone, copy try_to_unmap_one()'s mlock restoration into page_referenced_one(), and let page_check_references() return PAGEREF_ACTIVATE in this case. But page_referenced_one() may find a pte mapping one part of a hugepage: what hold should a pte mapped in a VM_LOCKED area exert over the entire huge page? That's debatable. The approach taken here is to treat that pte mapping in page_referenced_one() as if not VM_LOCKED, and if no VM_LOCKED pmd mapping is found later in the walk, and lack of reference permits, then PAGEREF_RECLAIM take it to attempted splitting as before. Signed-off-by:
-
Hugh Dickins authored
collapse_file() is using unmap_mapping_pages(1) on each small page found mapped, unlike others (reclaim, migration, splitting, memory-failure) who use try_to_unmap(). There are four advantages to try_to_unmap(): first, its TTU_IGNORE_MLOCK option now avoids leaving mlocked page in pagevec; second, its vma lookup uses i_mmap_lock_read() not i_mmap_lock_write(); third, it breaks out early if page is not mapped everywhere it might be; fourth, its TTU_BATCH_FLUSH option can be used, as in page reclaim, to save up all the TLB flushing until all of the pages have been unmapped. Wild guess: perhaps it was originally written to use try_to_unmap(), but hit the VM_BUG_ON_PAGE(page_mapped) after unmapping, because without TTU_SYNC it may skip page table locks; but unmap_mapping_pages() never skips them, so fixed the issue. I did once hit that VM_BUG_ON_PAGE() since making this change: we could pass TTU_SYNC here, but I think just delete the check - the race is very rare, this is an ordinary small page so we don't need to be so paranoid about mapcount surprises, and the page_ref_freeze() just below already handles the case adequately. Signed-off-by:
-
Hugh Dickins authored
Page migration of a VM_LOCKED page tends to fail, because when the old page is unmapped, it is put on the mlock pagevec with raised refcount, which then fails the freeze. At first I thought this would be fixed by a local mlock_page_drain() at the upper rmap_walk() level - which would have nicely batched all the munlocks of that page; but tests show that the task can too easily move to another cpu, leaving pagevec residue behind which fails the migration. So try_to_migrate_one() drain the local pagevec after page_remove_rmap() from a VM_LOCKED vma; and do the same in try_to_unmap_one(), whose TTU_IGNORE_MLOCK users would want the same treatment; and do the same in remove_migration_pte() - not important when successfully inserting a new page, but necessary when hoping to retry after failure. Any new pagevec runs the risk of adding a new way of stranding, and we might discover other corners where mlock_page_drain() or lru_add_drain() would now help. Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Hugh Dickins authored
A weakness of the page->mlock_count approach is the need for lruvec lock while holding page table lock. That is not an overhead we would allow on normal pages, but I think acceptable just for pages in an mlocked area. But let's try to amortize the extra cost by gathering on per-cpu pagevec before acquiring the lruvec lock. I have an unverified conjecture that the mlock pagevec might work out well for delaying the mlock processing of new file pages until they have got off lru_cache_add()'s pagevec and on to LRU. The initialization of page->mlock_count is subject to races and awkward: 0 or !!PageMlocked or 1? Was it wrong even in the implementation before this commit, which just widens the window? I haven't gone back to think it through. Maybe someone can point out a better way to initialize it. Bringing lru_cache_add_inactive_or_unevictable()'s mlock initialization into mm/mlock.c has helped: mlock_new_page(), using the mlock pagevec, rather than lru_cache_add()'s pagevec. Experimented with various orderings: the right thing seems to be for mlock_page() and mlock_new_page() to TestSetPageMlocked before adding to pagevec, but munlock_page() to leave TestClearPageMlocked to the later pagevec processing. Dropped the VM_BUG_ON_PAGE(PageTail)s this time around: they have made their point, and the thp_nr_page()s already contain a VM_BUG_ON_PGFLAGS() for that. This still leaves acquiring lruvec locks under page table lock each time the pagevec fills (or a THP is added): which I suppose is rather silly, since they sit on pagevec waiting to be processed long after page table lock has been dropped; but I'm disinclined to uglify the calling sequence until some load shows an actual problem with it (nothing wrong with taking lruvec lock under page table lock, just "nicer" to do it less). Signed-off-by:
-
Hugh Dickins authored
My reading of comment on smp_mb__after_atomic() in __pagevec_lru_add_fn() says that it can now be deleted; and that remains so when the next patch is added. Signed-off-by:
-
Hugh Dickins authored
Compaction, NUMA page movement, THP collapse/split, and memory failure do isolate unevictable pages from their "LRU", losing the record of mlock_count in doing so (isolators are likely to use page->lru for their own private lists, so mlock_count has to be presumed lost). That's unfortunate, and we should put in some work to correct that: one can imagine a function to build up the mlock_count again - but it would require i_mmap_rwsem for read, so be careful where it's called. Or page_referenced_one() and try_to_unmap_one() might do that extra work. But one place that can very easily be improved is page migration's __unmap_and_move(): a small adjustment to where the successful new page is put back on LRU, and its mlock_count (if any) is built back up by remove_migration_ptes(). Signed-off-by:
-
Hugh Dickins authored
Fill in missing pieces: reimplementation of munlock_vma_pages_range(), required to lower the mlock_counts when munlocking without munmapping; and its complement, implementation of mlock_vma_pages_range(), required to raise the mlock_counts on pages already there when a range is mlocked. Combine them into just the one function mlock_vma_pages_range(), using walk_page_range() to run mlock_pte_range(). This approach fixes the "Very slow unlockall()" of unpopulated PROT_NONE areas, reported in https://lore.kernel.org/linux-mm/70885d37-62b7-748b-29df-9e94f3291736@gmail.com/ Munlock clears VM_LOCKED at the start, under exclusive mmap_lock; but if a racing truncate or holepunch (depending on i_mmap_rwsem) gets to the pte first, it will not try to munlock the page: leaving release_pages() to correct it when the last reference to the page is gone - that's okay, a page is not evictable anyway while it is held by an extra reference. Mlock sets VM_LOCKED at the start, under exclusive mmap_lock; but if a racing remove_migration_pte() or try_to_unmap_one() (depending on i_mmap_rwsem) gets to the pte first, it will try to mlock the page, then mlock_pte_range() mlock it a second time. This is harder to reproduce, but a more serious race because it could leave the page unevictable indefinitely though the area is munlocked afterwards. Guard against it by setting the (inappropriate) VM_IO flag, and modifying mlock_vma_page() to decline such vmas. Signed-off-by:
-
Hugh Dickins authored
Previous patches have been preparatory: now implement page->mlock_count. The ordering of the "Unevictable LRU" is of no significance, and there is no point holding unevictable pages on a list: place page->mlock_count to overlay page->lru.prev (since page->lru.next is overlaid by compound_head, which needs to be even so as not to satisfy PageTail - though 2 could be added instead of 1 for each mlock, if that's ever an improvement). But it's only safe to rely on or modify page->mlock_count while lruvec lock is held and page is on unevictable "LRU" - we can save lots of edits by continuing to pretend that there's an imaginary LRU here (there is an unevictable count which still needs to be maintained, but not a list). The mlock_count technique suffers from an unreliability much like with page_mlock(): while someone else has the page off LRU, not much can be done. As before, err on the safe side (behave as if mlock_count 0), and let try_to_unlock_one() move the page to unevictable if reclaim finds out later on - a few misplaced pages don't matter, what we want to avoid is imbalancing reclaim by flooding evictable lists with unevictable pages. I am not a fan of "if (!isolate_lru_page(page)) putback_lru_page(page);": if we have taken lruvec lock to get the page off its present list, then we save everyone trouble (and however many extra atomic ops) by putting it on its destination list immediately. Signed-off-by:
-
Hugh Dickins authored
Placing munlock_vma_page() at the end of page_remove_rmap() shifts most of the munlocking to clear_page_mlock(), since PageMlocked is typically still set when mapcount has fallen to 0. That is not what we want: we want /proc/vmstat's unevictable_pgs_cleared to remain as a useful check on the integrity of of the mlock/munlock protocol - small numbers are not surprising, but big numbers mean the protocol is not working. That could be easily fixed by placing munlock_vma_page() at the start of page_remove_rmap(); but later in the series we shall want to batch the munlocking, and that too would tend to leave PageMlocked still set at the point when it is checked. So delete clear_page_mlock() now: leave it instead to release_pages() (and __page_cache_release()) to do this backstop clearing of Mlocked, when page refcount has fallen to 0. If a pinned page occasionally gets counted as Mlocked and Unevictable until it is unpinned, that's okay. A slightly regrettable side-effect of this change is that, since release_pages() and __page_cache_release() may be called at interrupt time, those places which update NR_MLOCK with interrupts enabled had better use mod_zone_page_state() than __mod_zone_page_state() (but holding the lruvec lock always has interrupts disabled). This change, forcing Mlocked off when refcount 0 instead of earlier when mapcount 0, is not fundamental: it can be reversed if performance or something else is found to suffer; but this is the easiest way to separate the stats - let's not complicate that without good reason. Signed-off-by:
-
Hugh Dickins authored
Add vma argument to mlock_vma_page() and munlock_vma_page(), make them inline functions which check (vma->vm_flags & VM_LOCKED) before calling mlock_page() and munlock_page() in mm/mlock.c. Add bool compound to mlock_vma_page() and munlock_vma_page(): this is because we have understandable difficulty in accounting pte maps of THPs, and if passed a PageHead page, mlock_page() and munlock_page() cannot tell whether it's a pmd map to be counted or a pte map to be ignored. Add vma arg to page_add_file_rmap() and page_remove_rmap(), like the others, and use that to call mlock_vma_page() at the end of the page adds, and munlock_vma_page() at the end of page_remove_rmap() (end or beginning? unimportant, but end was easier for assertions in testing). No page lock is required (although almost all adds happen to hold it): delete the "Serialize with page migration" BUG_ON(!PageLocked(page))s. Certainly page lock did serialize with page migration, but I'm having difficulty explaining why that was ever important. Mlock accounting on THPs has been hard to define, differed between anon and file, involved PageDoubleMap in some places and not others, required clear_page_mlock() at some points. Keep it simple now: just count the pmds and ignore the ptes, there is no reason for ptes to undo pmd mlocks. page_add_new_anon_rmap() callers unchanged: they have long been calling lru_cache_add_inactive_or_unevictable(), which does its own VM_LOCKED handling (it also checks for not VM_SPECIAL: I think that's overcautious, and inconsistent with other checks, that mmap_region() already prevents VM_LOCKED on VM_SPECIAL; but haven't quite convinced myself to change it). Signed-off-by:
-
Hugh Dickins authored
munlock_vma_pages_range() will still be required, when munlocking but not munmapping a set of pages; but when unmapping a pte, the mlock count will be maintained in much the same way as it will be maintained when mapping in the pte. Which removes the need for munlock_vma_pages_all() on mlocked vmas when munmapping or exiting: eliminating the catastrophic contention on i_mmap_rwsem, and the need for page lock on the pages. There is still a need to update locked_vm accounting according to the munmapped vmas when munmapping: do that in detach_vmas_to_be_unmapped(). exit_mmap() does not need locked_vm updates, so delete unlock_range(). And wasn't I the one who forbade the OOM reaper to attack mlocked vmas, because of the uncertainty in blocking on all those page locks? No fear of that now, so permit the OOM reaper on mlocked vmas. Signed-off-by:
-
Hugh Dickins authored
If counting page mlocks, we must not double-count: follow_page_pte() can tell if a page has already been Mlocked or not, but cannot tell if a pte has already been counted or not: that will have to be done when the pte is mapped in (which lru_cache_add_inactive_or_unevictable() already tracks for new anon pages, but there's no such tracking yet for others). Delete all the FOLL_MLOCK code - faulting in the missing pages will do all that is necessary, without special mlock_vma_page() calls from here. But then FOLL_POPULATE turns out to serve no purpose - it was there so that its absence would tell faultin_page() not to faultin page when setting up VM_LOCKONFAULT areas; but if there's no special work needed here for mlock, then there's no work at all here for VM_LOCKONFAULT. Have I got that right? I've not looked into the history, but see that FOLL_POPULATE goes back before VM_LOCKONFAULT: did it serve a different purpose before? Ah, yes, it was used to skip the old stack guard page. And is it intentional that COW is not broken on existing pages when setting up a VM_LOCKONFAULT area? I can see that being argued either way, and have no reason to disagree with current behaviour. Signed-off-by:
-
Hugh Dickins authored
We have recommended some applications to mlock their userspace, but that turns out to be counter-productive: when many processes mlock the same file, contention on rmap's i_mmap_rwsem can become intolerable at exit: it is needed for write, to remove any vma mapping that file from rmap's tree; but hogged for read by those with mlocks calling page_mlock() (formerly known as try_to_munlock()) on *each* page mapped from the file (the purpose being to find out whether another process has the page mlocked, so therefore it should not be unmlocked yet). Several optimizations have been made in the past: one is to skip page_mlock() when mapcount tells that nothing else has this page mapped; but that doesn't help at all when others do have it mapped. This time around, I initially intended to add a preliminary search of the rmap tree for overlapping VM_LOCKED ranges; but that gets messy with locking order, when in doubt whether a page is actually present; and risks adding even more contention on the i_mmap_rwsem. A solution would be much easier, if only there were space in struct page for an mlock_count... but actually, most of the time, there is space for it - an mlocked page spends most of its life on an unevictable LRU, but since 3.18 removed the scan_unevictable_pages sysctl, that "LRU" has been redundant. Let's try to reuse its page->lru. But leave that until a later patch: in this patch, clear the ground by removing page_mlock(), and all the infrastructure that has gathered around it - which mostly hinders understanding, and will make reviewing new additions harder. Don't mind those old comments about THPs, they date from before 4.5's refcounting rework: splitting is not a risk here. Just keep a minimal version of munlock_vma_page(), as reminder of what it should attend to (in particular, the odd way PGSTRANDED is counted out of PGMUNLOCKED), and likewise a stub for munlock_vma_pages_range(). Move unchanged __mlock_posix_error_return() out of the way, down to above its caller: this series then makes no further change after mlock_fixup(). After this and each following commit, the kernel builds, boots and runs; but with deficiencies which may show up in testing of mlock and munlock. The system calls succeed or fail as before, and mlock remains effective in preventing page reclaim; but meminfo's Unevictable and Mlocked amounts may be shown too low after mlock, grow, then stay too high after munlock: with previously mlocked pages remaining unevictable for too long, until finally unmapped and freed and counts corrected. Normal service will be resumed in "mm/munlock: mlock_pte_range() when mlocking or munlocking". Signed-off-by:
-
- 16 Feb, 2022 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fix from Ulf Hansson: "Fix recovery logic for multi block I/O reads (MMC_READ_MULTIPLE_BLOCK)" * tag 'mmc-v5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: block: fix read single on recovery logic
-
Linus Torvalds authored
Daniel Gibson reports that the n_tty code gets line termination wrong in very specific cases: "If you feed a line with exactly 64 chars + terminating newline, and directly afterwards (without reading) another line into a pseudo terminal, the the first read() on the other side will return the 64 char line *without* terminating newline, and the next read() will return the missing terminating newline AND the complete next line (if it fits in the buffer)" and bisected the behavior to commit 3b830a9c ("tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer"). Now, digging deeper, it turns out that the behavior isn't exactly new: what changed in commit 3b830a9c was that the tty line discipline .read() function is now passed an intermediate kernel buffer rather than the final user space buffer. And that intermediate kernel buffer is 64 bytes in size - thus that special case with exactly 64 bytes plus terminating newline. The same problem did exist before, but historically the boundary was not the 64-byte chunk, but the user-supplied buffer size, which is obviously generally bigger (and potentially bigger than N_TTY_BUF_SIZE, which would hide the issue entirely). The reason is that the n_tty canon_copy_from_read_buf() code would look ahead for the EOL character one byte further than it would actually copy. It would then decide that it had found the terminator, and unmark it as an EOL character - which in turn explains why the next read wouldn't then be terminated by it. Now, the reason it did all this in the first place is related to some historical and pretty obscure EOF behavior, see commit ac8f3bf8 ("n_tty: Fix poll() after buffer-limited eof push read") and commit 40d5e090 ("n_tty: Fix EOF push handling"). And the reason for the EOL confusion is that we treat EOF as a special EOL condition, with the EOL character being NUL (aka "__DISABLED_CHAR" in the kernel sources). So that EOF look-ahead also affects the normal EOL handling. This patch just removes the look-ahead that causes problems, because EOL is much more critical than the historical "EOF in the middle of a line that coincides with the end of the buffer" handling ever was. Now, it is possible that we should indeed re-introduce the "look at next character to see if it's a EOF" behavior, but if so, that should be done not at the kernel buffer chunk boundary in canon_copy_from_read_buf(), but at a higher level, when we run out of the user buffer. In particular, the place to do that would be at the top of 'n_tty_read()', where we check if it's a continuation of a previously started read, and there is no more buffer space left, we could decide to just eat the __DISABLED_CHAR at that point. But that would be a separate patch, because I suspect nobody actually cares, and I'd like to get a report about it before bothering. Fixes: 3b830a9c ("tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer") Fixes: ac8f3bf8 ("n_tty: Fix poll() after buffer-limited eof push read") Fixes: 40d5e090 ("n_tty: Fix EOF push handling") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215611Reported-and-tested-by:
Daniel Gibson <metalcaedes@gmail.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 15 Feb, 2022 5 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "ARM: - Read HW interrupt pending state from the HW x86: - Don't truncate the performance event mask on AMD - Fix Xen runstate updates to be atomic when preempting vCPU - Fix for AMD AVIC interrupt injection race - Several other AMD fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW KVM: x86/pmu: Don't truncate the PerfEvtSeln MSR when creating a perf event KVM: SVM: fix race between interrupt delivery and AVIC inhibition KVM: SVM: set IRR in svm_deliver_interrupt KVM: SVM: extract avic_ring_doorbell selftests: kvm: Remove absent target file KVM: arm64: vgic: Read HW interrupt pending state from the HW KVM: x86/xen: Fix runstate updates to be atomic when preempting vCPU KVM: x86: SVM: move avic definitions from AMD's spec to svm.h KVM: x86: lapic: don't touch irr_pending in kvm_apic_update_apicv when inhibiting it KVM: x86: nSVM: deal with L1 hypervisor that intercepts interrupts but lets L2 control them KVM: x86: nSVM: expose clean bit support to the guest KVM: x86: nSVM/nVMX: set nested_run_pending on VM entry which is a result of RSM KVM: x86: nSVM: mark vmcb01 as dirty when restoring SMM saved state KVM: x86: nSVM: fix potential NULL derefernce on nested migration KVM: x86: SVM: don't passthrough SMAP/SMEP/PKE bits in !NPT && !gCR0.PG case Revert "svm: Add warning message for AVIC IPI invalid target"
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - memory leak fix for hid-elo driver (Dongliang Mu) - fix for hangs on newer AMD platforms with amd_sfh-driven hardware (Basavaraj Natikar ) - locking fix in i2c-hid (Daniel Thompson) - a few device-ID specific quirks * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: amd_sfh: Add interrupt handler to process interrupts HID: amd_sfh: Add functionality to clear interrupts HID: amd_sfh: Disable the interrupt for all command HID: amd_sfh: Correct the structure field name HID: amd_sfh: Handle amd_sfh work buffer in PM ops HID:Add support for UGTABLET WP5540 HID: amd_sfh: Add illuminance mask to limit ALS max value HID: amd_sfh: Increase sensor command timeout HID: i2c-hid: goodix: Fix a lockdep splat HID: elo: fix memory leak in elo_probe HID: apple: Set the tilde quirk flag on the Wellspring 5 and later
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - yield CPU more often when defragmenting a large file - skip defragmenting extents already under writeback - improve error message when send fails to write file data - get rid of warning when mounted with 'flushoncommit' * tag 'for-5.17-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: send: in case of IO error log it btrfs: get rid of warning on transaction commit when using flushoncommit btrfs: defrag: don't try to defrag extents which are under writeback btrfs: don't hold CPU for too long when defragging a file
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc architecture fixes from Helge Deller: - Fix miscompilations when function calls are made from inside a put_user() call - Drop __init from map_pages() declaration to avoid random boot crashes - Added #error messages if a 64-bit compiler was used to build a 32-bit kernel (and vice versa) - Fix out-of-bound data TLB miss faults in sba_iommu and ccio-dma drivers - Add ioread64_lo_hi() and iowrite64_lo_hi() functions to avoid kernel test robot errors - Fix link failure when 8250_gsc driver is built without CONFIG_IOSAPIC * tag 'for-5.17/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: serial: parisc: GSC: fix build when IOSAPIC is not set parisc: Fix some apparent put_user() failures parisc: Show error if wrong 32/64-bit compiler is being used parisc: Add ioread64_lo_hi() and iowrite64_lo_hi() parisc: Fix sglist access in ccio-dma.c parisc: Fix data TLB miss in sba_unmap_sg parisc: Drop __init from map_pages declaration
-
Linus Torvalds authored
Merge tag 'hyperv-fixes-signed-20220215' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - Rework use of DMA_BIT_MASK in vmbus to work around a clang bug (Michael Kelley) - Fix NUMA topology (Long Li) - Fix a memory leak in vmbus (Miaoqian Lin) - One minor clean-up patch (Cai Huoqing) * tag 'hyperv-fixes-signed-20220215' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: utils: Make use of the helper macro LIST_HEAD() Drivers: hv: vmbus: Rework use of DMA_BIT_MASK(64) Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobj PCI: hv: Fix NUMA node assignment when kernel boots with custom NUMA topology
-
- 14 Feb, 2022 10 commits
-
-
Randy Dunlap authored
There is a build error when using a kernel .config file from 'kernel test robot' for a different build problem: hppa64-linux-ld: drivers/tty/serial/8250/8250_gsc.o: in function `.LC3': (.data.rel.ro+0x18): undefined reference to `iosapic_serial_irq' when: CONFIG_GSC=y CONFIG_SERIO_GSCPS2=y CONFIG_SERIAL_8250_GSC=y CONFIG_PCI is not set and hence PCI_LBA is not set. IOSAPIC depends on PCI_LBA, so IOSAPIC is not set/enabled. Make the use of iosapic_serial_irq() conditional to fix the build error. Signed-off-by:Randy Dunlap <rdunlap@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-serial@vger.kernel.org Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Johan Hovold <johan@kernel.org> Suggested-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Linus Torvalds authored
Merge tag 'regulator-fix-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "One fix here, for initialisation of regulators that don't have an in_enabled() operation which would mainly impact cases where they aren't otherwise used during early setup for some reason" * tag 'regulator-fix-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: core: fix false positive in regulator_late_cleanup()
-
Basavaraj Natikar authored
On newer AMD platforms with SFH, it is observed that random interrupts get generated on the SFH hardware and until this is cleared the firmware sensor processing is stalled, resulting in no data been received to driver side. Add routines to handle these interrupts, so that firmware operations are not stalled. Signed-off-by:
Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
Basavaraj Natikar authored
Newer AMD platforms with SFH may generate interrupts on some events which are unwarranted. Until this is cleared the actual MP2 data processing maybe stalled in some cases. Add a mechanism to clear the pending interrupts (if any) during the driver initialization and sensor command operations. Signed-off-by:
-
Basavaraj Natikar authored
Sensor data is processed in polling mode. Hence disable the interrupt for all sensor command. Signed-off-by:
-
Basavaraj Natikar authored
Misinterpreted intr_enable field name. Hence correct the structure field name accordingly to reflect the functionality. Fixes: f264481a ("HID: amd_sfh: Extend driver capabilities for multi-generation support") Signed-off-by:
-
Basavaraj Natikar authored
Since in the current amd_sfh design the sensor data is periodically obtained in the form of poll data, during the suspend/resume cycle, scheduling a delayed work adds no value. So, cancel the work and restart back during the suspend/resume cycle respectively. Signed-off-by:
-
Jim Mattson authored
AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of a PerfEvtSeln MSR. Don't mask off the high nybble when configuring a RAW perf event. Fixes: ca724305 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Signed-off-by:
Jim Mattson <jmattson@google.com> Message-Id: <20220203014813.2130559-2-jmattson@google.com> Reviewed-by:
David Dunn <daviddunn@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jim Mattson authored
AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of a PerfEvtSeln MSR. Don't drop the high nybble when setting up the config field of a perf_event_attr structure for a call to perf_event_create_kernel_counter(). Fixes: ca724305 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Reported-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
-
Helge Deller authored
After commit 4b9d2a73 ("parisc: Switch user access functions to signal errors in r29 instead of r8") bash suddenly started to report those warnings after login: -bash: cannot set terminal process group (-1): Bad file descriptor -bash: no job control in this shell It turned out, that a function call inside a put_user(), e.g.: put_user(vt_do_kdgkbmode(console), (int __user *)arg); clobbered the error register (r29) and thus the put_user() call itself seem to have failed. Rearrange the C-code to pre-calculate the intermediate value and then do the put_user(). Additionally prefer the "+" constraint on pu_err and gu_err registers to tell the compiler that those operands are both read and written by the assembly instruction. Reported-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
-
- 13 Feb, 2022 2 commits
-
-
Helge Deller authored
It happens quite often that people use the wrong compiler to build the kernel: make ARCH=parisc -> builds the 32-bit kernel make ARCH=parisc64 -> builds the 64-bit kernel This patch adds a sanity check which errors out with an instruction how use the correct ARCH= option. Signed-off-by: -
Linus Torvalds authored
-
