- 21 Jul, 2017 34 commits
-
-
Nitin Gupta authored
[ Upstream commit dbd2667a ] The function assumes that each PMD points to head of a huge page. This is not correct as a PMD can point to start of any 8M region with a, say 256M, hugepage. The fix ensures that it points to the correct head of any PMD huge page. Cc: Julian Calaby <julian.calaby@gmail.com> Signed-off-by:
Nitin Gupta <nitin.m.gupta@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nagarathnam Muthusamy authored
[ Upstream commit f5a651f1 ] Missing symbol type for few functions prevents genksyms from generating symbol versions for those functions. This patch fixes them. Signed-off-by:
Nagarathnam Muthusamy <nagarathnam.muthusamy@oracle.com> Reviewed-by:
Babu Moger <babu.moger@oracle.com> Signed-off-by:
-
Nagarathnam Muthusamy authored
[ Upstream commit d16c0649 ] The following regex in Makefile.build matches only one ___EXPORT_SYMBOL per line. sed 's/.*___EXPORT_SYMBOL[[:space:]]*\([a-zA-Z0-9_]*\)[[:space:]]*,.*/EXPORT_SYMBOL(\1);/' ATOMIC_OPS macro in atomic_64.S expands multiple symbols in same line hence version generation is done only for the last matched symbol. This patch adds new line between the symbol expansions. Signed-off-by:
-
Nagarathnam Muthusamy authored
[ Upstream commit bdca8cc0 ] This patch adds the prototypes of assembly defined functions to asm-prototypes.h. Some prototypes are directly added as they are not present in any existing header files. Signed-off-by:
-
Bert Kenward authored
[ Upstream commit c70d6815 ] If we have more than 32 unicast MAC addresses assigned to an interface we will read beyond the end of the address table in the driver when adding filters. The next 256 entries store multicast addresses, so we will end up attempting to insert duplicate filters, which is mostly harmless. If we add more than 288 unicast addresses we will then read past the multicast address table, which is likely to be more exciting. Fixes: 12fb0da4 ("sfc: clean fallbacks between promisc/normal in efx_ef10_filter_sync_rx_mode") Signed-off-by:
Bert Kenward <bkenward@solarflare.com> Signed-off-by:
-
Arend van Spriel authored
[ Upstream commit 8f44c9a4 ] The lower level nl80211 code in cfg80211 ensures that "len" is between 25 and NL80211_ATTR_FRAME (2304). We subtract DOT11_MGMT_HDR_LEN (24) from "len" so thats's max of 2280. However, the action_frame->data[] buffer is only BRCMF_FIL_ACTION_FRAME_SIZE (1800) bytes long so this memcpy() can overflow. memcpy(action_frame->data, &buf[DOT11_MGMT_HDR_LEN], le16_to_cpu(action_frame->len)); Cc: stable@vger.kernel.org # 3.9.x Fixes: 18e2f61d ("brcmfmac: P2P action frame tx.") Reported-by:
"freenerguo(郭大兴)" <freenerguo@tencent.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
Eduardo Valentin authored
[ Upstream commit 1bfb1596 ] We currently get the following kmemleak report: unreferenced object 0xffff8800039d9820 (size 32): comm "softirq", pid 0, jiffies 4295212383 (age 792.416s) hex dump (first 32 bytes): 00 0c e0 03 00 88 ff ff ff 02 00 00 00 00 00 00 ................ 00 00 00 01 ff 11 00 02 86 dd 00 00 ff ff ff ff ................ backtrace: [<ffffffff8152b4aa>] kmemleak_alloc+0x4a/0xa0 [<ffffffff811d8ec8>] kmem_cache_alloc_trace+0xb8/0x1c0 [<ffffffffa0389683>] __br_mdb_notify+0x2a3/0x300 [bridge] [<ffffffffa038a0ce>] br_mdb_notify+0x6e/0x70 [bridge] [<ffffffffa0386479>] br_multicast_add_group+0x109/0x150 [bridge] [<ffffffffa0386518>] br_ip6_multicast_add_group+0x58/0x60 [bridge] [<ffffffffa0387fb5>] br_multicast_rcv+0x1d5/0xdb0 [bridge] [<ffffffffa037d7cf>] br_handle_frame_finish+0xcf/0x510 [bridge] [<ffffffffa03a236b>] br_nf_hook_thresh.part.27+0xb/0x10 [br_netfilter] [<ffffffffa03a3738>] br_nf_hook_thresh+0x48/0xb0 [br_netfilter] [<ffffffffa03a3fb9>] br_nf_pre_routing_finish_ipv6+0x109/0x1d0 [br_netfilter] [<ffffffffa03a4400>] br_nf_pre_routing_ipv6+0xd0/0x14c [br_netfilter] [<ffffffffa03a3c27>] br_nf_pre_routing+0x197/0x3d0 [br_netfilter] [<ffffffff814a2952>] nf_iterate+0x52/0x60 [<ffffffff814a29bc>] nf_hook_slow+0x5c/0xb0 [<ffffffffa037ddf4>] br_handle_frame+0x1a4/0x2c0 [bridge] This happens when switchdev_port_obj_add() fails. This patch frees complete_info object in the fail path. Reviewed-by:
Vallish Vaidyeshwara <vallish@amazon.com> Signed-off-by:
Eduardo Valentin <eduval@amazon.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit ffa423fb ] We are not allowed to block on the RCU reader side, so can't just hold the mutex as before. As a quick fix, convert it to a spinlock. Fixes: d9f1f61c ("tap: Extending tap device create/destroy APIs") Reported-by:
Christian Borntraeger <borntraeger@de.ibm.com> Tested-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Guilherme G. Piccoli authored
[ Upstream commit 6a146f3a ] Since the introduction of ULD (Upper-Layer Drivers), the MSI-X deallocating path changed in cxgb4: the driver frees the interrupts of ULD when unregistering it or on shutdown PCI handler. Problem is that if a MSI-X is not freed before deallocated in the PCI layer, it will trigger a BUG() due to still "alive" interrupt being tentatively quiesced. The below trace was observed when doing a simple unbind of Chelsio's adapter PCI function, like: "echo 001e:80:00.4 > /sys/bus/pci/drivers/cxgb4/unbind" Trace: kernel BUG at drivers/pci/msi.c:352! Oops: Exception in kernel mode, sig: 5 [#1] ... NIP [c0000000005a5e60] free_msi_irqs+0xa0/0x250 LR [c0000000005a5e50] free_msi_irqs+0x90/0x250 Call Trace: [c0000000005a5e50] free_msi_irqs+0x90/0x250 (unreliable) [c0000000005a72c4] pci_disable_msix+0x124/0x180 [d000000011e06708] disable_msi+0x88/0xb0 [cxgb4] [d000000011e06948] free_some_resources+0xa8/0x160 [cxgb4] [d000000011e06d60] remove_one+0x170/0x3c0 [cxgb4] [c00000000058a910] pci_device_remove+0x70/0x110 [c00000000064ef04] device_release_driver_internal+0x1f4/0x2c0 ... This patch fixes the issue by refactoring the shutdown path of ULD on cxgb4 driver, by properly freeing and disabling interrupts on PCI remove handler too. Fixes: 0fbc81b3 ("Allocate resources dynamically for all cxgb4 ULD's") Reported-by:
Harsha Thyagaraja <hathyaga@in.ibm.com> Signed-off-by:
Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by:
-
Huy Nguyen authored
[ Upstream commit d968f0f2 ] Latest change in open-lldp code uses bytes 6-11 of perm_addr buffer as the Ethernet source address for the host TLV packet. Since our driver does not fill these bytes, they stay at zero and the open-lldp code ends up sending the TLV packet with zero source address and the switch drops this packet. The fix is to initialize these bytes to 0xff. The open-lldp code considers 0xff:ff:ff:ff:ff:ff as the invalid address and falls back to use the host's mac address as the Ethernet source address. Fixes: 3a6a931d ("net/mlx5e: Support DCBX CEE API") Signed-off-by:
Huy Nguyen <huyn@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Sowmini Varadhan authored
[ Upstream commit 0933a578 ] There are two problems with calling sock_create_kern() from rds_tcp_accept_one() 1. it sets up a new_sock->sk that is wasteful, because this ->sk is going to get replaced by inet_accept() in the subsequent ->accept() 2. The new_sock->sk is a leaked reference in sock_graft() which expects to find a null parent->sk Avoid these problems by calling sock_create_lite(). Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit f630c38e ] When destroying a VRF device we cleanup the slaves in its ndo_uninit() function, but that causes packets to be switched (skb->dev == vrf being destroyed) even though we're pass the point where the VRF should be receiving any packets while it is being dismantled. This causes a BUG_ON to trigger if we have raw sockets (trace below). The reason is that the inetdev of the VRF has been destroyed but we're still sending packets up the stack with it, so let's free the slaves in the dellink callback as David Ahern suggested. Note that this fix doesn't prevent packets from going up when the VRF device is admin down. [ 35.631371] ------------[ cut here ]------------ [ 35.631603] kernel BUG at net/ipv4/fib_frontend.c:285! [ 35.631854] invalid opcode: 0000 [#1] SMP [ 35.631977] Modules linked in: [ 35.632081] CPU: 2 PID: 22 Comm: ksoftirqd/2 Not tainted 4.12.0-rc7+ #45 [ 35.632247] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 35.632477] task: ffff88005ad68000 task.stack: ffff88005ad64000 [ 35.632632] RIP: 0010:fib_compute_spec_dst+0xfc/0x1ee [ 35.632769] RSP: 0018:ffff88005ad67978 EFLAGS: 00010202 [ 35.632910] RAX: 0000000000000001 RBX: ffff880059a7f200 RCX: 0000000000000000 [ 35.633084] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff82274af0 [ 35.633256] RBP: ffff88005ad679f8 R08: 000000000001ef70 R09: 0000000000000046 [ 35.633430] R10: ffff88005ad679f8 R11: ffff880037731cb0 R12: 0000000000000001 [ 35.633603] R13: ffff8800599e3000 R14: 0000000000000000 R15: ffff8800599cb852 [ 35.634114] FS: 0000000000000000(0000) GS:ffff88005d900000(0000) knlGS:0000000000000000 [ 35.634306] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.634456] CR2: 00007f3563227095 CR3: 000000000201d000 CR4: 00000000000406e0 [ 35.634632] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 35.634865] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 35.635055] Call Trace: [ 35.635271] ? __lock_acquire+0xf0d/0x1117 [ 35.635522] ipv4_pktinfo_prepare+0x82/0x151 [ 35.635831] raw_rcv_skb+0x17/0x3c [ 35.636062] raw_rcv+0xe5/0xf7 [ 35.636287] raw_local_deliver+0x169/0x1d9 [ 35.636534] ip_local_deliver_finish+0x87/0x1c4 [ 35.636820] ip_local_deliver+0x63/0x7f [ 35.637058] ip_rcv_finish+0x340/0x3a1 [ 35.637295] ip_rcv+0x314/0x34a [ 35.637525] __netif_receive_skb_core+0x49f/0x7c5 [ 35.637780] ? lock_acquire+0x13f/0x1d7 [ 35.638018] ? lock_acquire+0x15e/0x1d7 [ 35.638259] __netif_receive_skb+0x1e/0x94 [ 35.638502] ? __netif_receive_skb+0x1e/0x94 [ 35.638748] netif_receive_skb_internal+0x74/0x300 [ 35.639002] ? dev_gro_receive+0x2ed/0x411 [ 35.639246] ? lock_is_held_type+0xc4/0xd2 [ 35.639491] napi_gro_receive+0x105/0x1a0 [ 35.639736] receive_buf+0xc32/0xc74 [ 35.639965] ? detach_buf+0x67/0x153 [ 35.640201] ? virtqueue_get_buf_ctx+0x120/0x176 [ 35.640453] virtnet_poll+0x128/0x1c5 [ 35.640690] net_rx_action+0x103/0x343 [ 35.640932] __do_softirq+0x1c7/0x4b7 [ 35.641171] run_ksoftirqd+0x23/0x5c [ 35.641403] smpboot_thread_fn+0x24f/0x26d [ 35.641646] ? sort_range+0x22/0x22 [ 35.641878] kthread+0x129/0x131 [ 35.642104] ? __list_add+0x31/0x31 [ 35.642335] ? __list_add+0x31/0x31 [ 35.642568] ret_from_fork+0x2a/0x40 [ 35.642804] Code: 05 bd 87 a3 00 01 e8 1f ef 98 ff 4d 85 f6 48 c7 c7 f0 4a 27 82 41 0f 94 c4 31 c9 31 d2 41 0f b6 f4 e8 04 71 a1 ff 45 84 e4 74 02 <0f> 0b 0f b7 93 c4 00 00 00 4d 8b a5 80 05 00 00 48 03 93 d0 00 [ 35.644342] RIP: fib_compute_spec_dst+0xfc/0x1ee RSP: ffff88005ad67978 Fixes: 193125db ("net: Introduce VRF device driver") Reported-by:
Chris Cormier <chriscormier@cumulusnetworks.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit f06b7549 ] Lennert reported a failure to add different mpls encaps in a multipath route: $ ip -6 route add 1234::/16 \ nexthop encap mpls 10 via fe80::1 dev ens3 \ nexthop encap mpls 20 via fe80::1 dev ens3 RTNETLINK answers: File exists The problem is that the duplicate nexthop detection does not compare lwtunnel configuration. Add it. Fixes: 19e42e45 ("ipv6: support for fib route lwtunnel encap attributes") Signed-off-by:
João Taveira Araújo <joao.taveira@gmail.com> Reported-by:
Lennert Buytenhek <buytenh@wantstofly.org> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Tested-by:
-
Derek Chickles authored
[ Upstream commit 05a6b4ca ] The code that detects a failed soft reset of Octeon is comparing the wrong value against the reset value of the Octeon SLI_SCRATCH_1 register, resulting in an inability to detect a soft reset failure. Fix it by using the correct value in the comparison, which is any non-zero value. Fixes: f21fb3ed ("Add support of Cavium Liquidio ethernet adapters") Fixes: c0eab5b3 ("liquidio: CN23XX firmware download") Signed-off-by:
Derek Chickles <derek.chickles@cavium.com> Signed-off-by:
Satanand Burla <satananda.burla@cavium.com> Signed-off-by:
Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Alban Browaeys authored
[ Upstream commit 9af9959e ] commit 9256645a ("net/core: relax BUILD_BUG_ON in netdev_stats_to_stats64") made an attempt to read beyond the size of the source a possibility. Fix to only copy src size to dest. As dest might be bigger than src. ================================================================== BUG: KASAN: slab-out-of-bounds in netdev_stats_to_stats64+0xe/0x30 at addr ffff8801be248b20 Read of size 192 by task VBoxNetAdpCtl/6734 CPU: 1 PID: 6734 Comm: VBoxNetAdpCtl Tainted: G O 4.11.4prahal+intel+ #118 Hardware name: LENOVO 20CDCTO1WW/20CDCTO1WW, BIOS GQET52WW (1.32 ) 05/04/2017 Call Trace: dump_stack+0x63/0x86 kasan_object_err+0x1c/0x70 kasan_report+0x270/0x520 ? netdev_stats_to_stats64+0xe/0x30 ? sched_clock_cpu+0x1b/0x190 ? __module_address+0x3e/0x3b0 ? unwind_next_frame+0x1ea/0xb00 check_memory_region+0x13c/0x1a0 memcpy+0x23/0x50 netdev_stats_to_stats64+0xe/0x30 dev_get_stats+0x1b9/0x230 rtnl_fill_stats+0x44/0xc00 ? nla_put+0xc6/0x130 rtnl_fill_ifinfo+0xe9e/0x3700 ? rtnl_fill_vfinfo+0xde0/0xde0 ? sched_clock+0x9/0x10 ? sched_clock+0x9/0x10 ? sched_clock_local+0x120/0x130 ? __module_address+0x3e/0x3b0 ? unwind_next_frame+0x1ea/0xb00 ? sched_clock+0x9/0x10 ? sched_clock+0x9/0x10 ? sched_clock_cpu+0x1b/0x190 ? VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp] ? depot_save_stack+0x1d8/0x4a0 ? depot_save_stack+0x34f/0x4a0 ? depot_save_stack+0x34f/0x4a0 ? save_stack+0xb1/0xd0 ? save_stack_trace+0x16/0x20 ? save_stack+0x46/0xd0 ? kasan_slab_alloc+0x12/0x20 ? __kmalloc_node_track_caller+0x10d/0x350 ? __kmalloc_reserve.isra.36+0x2c/0xc0 ? __alloc_skb+0xd0/0x560 ? rtmsg_ifinfo_build_skb+0x61/0x120 ? rtmsg_ifinfo.part.25+0x16/0xb0 ? rtmsg_ifinfo+0x47/0x70 ? register_netdev+0x15/0x30 ? vboxNetAdpOsCreate+0xc0/0x1c0 [vboxnetadp] ? vboxNetAdpCreate+0x210/0x400 [vboxnetadp] ? VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp] ? do_vfs_ioctl+0x17f/0xff0 ? SyS_ioctl+0x74/0x80 ? do_syscall_64+0x182/0x390 ? __alloc_skb+0xd0/0x560 ? __alloc_skb+0xd0/0x560 ? save_stack_trace+0x16/0x20 ? init_object+0x64/0xa0 ? ___slab_alloc+0x1ae/0x5c0 ? ___slab_alloc+0x1ae/0x5c0 ? __alloc_skb+0xd0/0x560 ? sched_clock+0x9/0x10 ? kasan_unpoison_shadow+0x35/0x50 ? kasan_kmalloc+0xad/0xe0 ? __kmalloc_node_track_caller+0x246/0x350 ? __alloc_skb+0xd0/0x560 ? kasan_unpoison_shadow+0x35/0x50 ? memset+0x31/0x40 ? __alloc_skb+0x31f/0x560 ? napi_consume_skb+0x320/0x320 ? br_get_link_af_size_filtered+0xb7/0x120 [bridge] ? if_nlmsg_size+0x440/0x630 rtmsg_ifinfo_build_skb+0x83/0x120 rtmsg_ifinfo.part.25+0x16/0xb0 rtmsg_ifinfo+0x47/0x70 register_netdevice+0xa2b/0xe50 ? __kmalloc+0x171/0x2d0 ? netdev_change_features+0x80/0x80 register_netdev+0x15/0x30 vboxNetAdpOsCreate+0xc0/0x1c0 [vboxnetadp] vboxNetAdpCreate+0x210/0x400 [vboxnetadp] ? vboxNetAdpComposeMACAddress+0x1d0/0x1d0 [vboxnetadp] ? kasan_check_write+0x14/0x20 VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp] ? VBoxNetAdpLinuxOpen+0x20/0x20 [vboxnetadp] ? lock_acquire+0x11c/0x270 ? __audit_syscall_entry+0x2fb/0x660 do_vfs_ioctl+0x17f/0xff0 ? __audit_syscall_entry+0x2fb/0x660 ? ioctl_preallocate+0x1d0/0x1d0 ? __audit_syscall_entry+0x2fb/0x660 ? kmem_cache_free+0xb2/0x250 ? syscall_trace_enter+0x537/0xd00 ? exit_to_usermode_loop+0x100/0x100 SyS_ioctl+0x74/0x80 ? do_sys_open+0x350/0x350 ? do_vfs_ioctl+0xff0/0xff0 do_syscall_64+0x182/0x390 entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:0x7f7e39a1ae07 RSP: 002b:00007ffc6f04c6d8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffc6f04c730 RCX: 00007f7e39a1ae07 RDX: 00007ffc6f04c730 RSI: 00000000c0207601 RDI: 0000000000000007 RBP: 00007ffc6f04c700 R08: 00007ffc6f04c780 R09: 0000000000000008 R10: 0000000000000541 R11: 0000000000000206 R12: 0000000000000007 R13: 00000000c0207601 R14: 00007ffc6f04c730 R15: 0000000000000012 Object at ffff8801be248008, in cache kmalloc-4096 size: 4096 Allocated: PID = 6734 save_stack_trace+0x16/0x20 save_stack+0x46/0xd0 kasan_kmalloc+0xad/0xe0 __kmalloc+0x171/0x2d0 alloc_netdev_mqs+0x8a7/0xbe0 vboxNetAdpOsCreate+0x65/0x1c0 [vboxnetadp] vboxNetAdpCreate+0x210/0x400 [vboxnetadp] VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp] do_vfs_ioctl+0x17f/0xff0 SyS_ioctl+0x74/0x80 do_syscall_64+0x182/0x390 return_from_SYSCALL_64+0x0/0x6a Freed: PID = 5600 save_stack_trace+0x16/0x20 save_stack+0x46/0xd0 kasan_slab_free+0x73/0xc0 kfree+0xe4/0x220 kvfree+0x25/0x30 single_release+0x74/0xb0 __fput+0x265/0x6b0 ____fput+0x9/0x10 task_work_run+0xd5/0x150 exit_to_usermode_loop+0xe2/0x100 do_syscall_64+0x26c/0x390 return_from_SYSCALL_64+0x0/0x6a Memory state around the buggy address: ffff8801be248a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8801be248b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8801be248b80: 00 00 00 00 00 00 00 00 00 00 00 07 fc fc fc fc ^ ffff8801be248c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801be248c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Signed-off-by:
Alban Browaeys <alban.browaeys@gmail.com> Signed-off-by:
-
Jiri Benc authored
[ Upstream commit 4b4c21fa ] It's not a good idea to add the same hlist_node to two different hash lists. This leads to various hard to debug memory corruptions. Fixes: 8ed66f0e ("geneve: implement support for IPv6-based tunnels") Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Jiri Benc authored
[ Upstream commit 69e76661 ] It's not a good idea to add the same hlist_node to two different hash lists. This leads to various hard to debug memory corruptions. Fixes: b1be00a6 ("vxlan: support both IPv4 and IPv6 sockets in a single vxlan device") Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit ec8add2a ] Currently, when the link for $DEV is down, this command succeeds but the address is removed immediately by DAD (1): ip addr add 1111::12/64 dev $DEV valid_lft 3600 preferred_lft 1800 In the same situation, this will succeed and not remove the address (2): ip addr add 1111::12/64 dev $DEV ip addr change 1111::12/64 dev $DEV valid_lft 3600 preferred_lft 1800 The comment in addrconf_dad_begin() when !IF_READY makes it look like this is the intended behavior, but doesn't explain why: * If the device is not ready: * - keep it tentative if it is a permanent address. * - otherwise, kill it. We clearly cannot prevent userspace from doing (2), but we can make (1) work consistently with (2). addrconf_dad_stop() is only called in two cases: if DAD failed, or to skip DAD when the link is down. In that second case, the fix is to avoid deleting the address, like we already do for permanent addresses. Fixes: 3c21edbd ("[IPV6]: Defer IPv6 device initialization until the link becomes ready.") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Gal Pressman authored
[ Upstream commit 8ff93de7 ] Symbol error during carrier counter from PPCNT was mistakenly reported as TX carrier errors in get_stats ndo, although it's an RX counter. Fixes: 269e6b3a ("net/mlx5e: Report additional error statistics in get stats ndo") Signed-off-by:
Gal Pressman <galp@mellanox.com> Signed-off-by:
-
Mohamad Haj Yahia authored
[ Upstream commit 2a0165a0 ] Draining the health workqueue will ignore future health works including the one that report hardware failure and thus we can't enter error state Instead cancel the recovery flow and make sure only recovery flow won't be scheduled. Fixes: 5e44fca5 ('net/mlx5: Only cancel recovery work when cleaning up device') Signed-off-by:
Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
-
Michal Kubeček authored
[ Upstream commit e44699d2 ] Recently I started seeing warnings about pages with refcount -1. The problem was traced to packets being reused after their head was merged into a GRO packet by skb_gro_receive(). While bisecting the issue pointed to commit c21b48cc ("net: adjust skb->truesize in ___pskb_trim()") and I have never seen it on a kernel with it reverted, I believe the real problem appeared earlier when the option to merge head frag in GRO was implemented. Handling NAPI_GRO_FREE_STOLEN_HEAD state was only added to GRO_MERGED_FREE branch of napi_skb_finish() so that if the driver uses napi_gro_frags() and head is merged (which in my case happens after the skb_condense() call added by the commit mentioned above), the skb is reused including the head that has been merged. As a result, we release the page reference twice and eventually end up with negative page refcount. To fix the problem, handle NAPI_GRO_FREE_STOLEN_HEAD in napi_frags_finish() the same way it's done in napi_skb_finish(). Fixes: d7e8883c ("net: make GRO aware of skb->head_frag") Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 6bdf6abc ] Leaking kernel addresses on unpriviledged is generally disallowed, for example, verifier rejects the following: 0: (b7) r0 = 0 1: (18) r2 = 0xffff897e82304400 3: (7b) *(u64 *)(r1 +48) = r2 R2 leaks addr into ctx Doing pointer arithmetic on them is also forbidden, so that they don't turn into unknown value and then get leaked out. However, there's xadd as a special case, where we don't check the src reg for being a pointer register, e.g. the following will pass: 0: (b7) r0 = 0 1: (7b) *(u64 *)(r1 +48) = r0 2: (18) r2 = 0xffff897e82304400 ; map 4: (db) lock *(u64 *)(r1 +48) += r2 5: (95) exit We could store the pointer into skb->cb, loose the type context, and then read it out from there again to leak it eventually out of a map value. Or more easily in a different variant, too: 0: (bf) r6 = r1 1: (7a) *(u64 *)(r10 -8) = 0 2: (bf) r2 = r10 3: (07) r2 += -8 4: (18) r1 = 0x0 6: (85) call bpf_map_lookup_elem#1 7: (15) if r0 == 0x0 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R6=ctx R10=fp 8: (b7) r3 = 0 9: (7b) *(u64 *)(r0 +0) = r3 10: (db) lock *(u64 *)(r0 +0) += r6 11: (b7) r0 = 0 12: (95) exit from 7 to 11: R0=inv,min_value=0,max_value=0 R6=ctx R10=fp 11: (b7) r0 = 0 12: (95) exit Prevent this by checking xadd src reg for pointer types. Also add a couple of test cases related to this. Fixes: 1be7f75d ("bpf: enable non-root eBPF programs") Fixes: 17a52670 ("bpf: verifier (add verifier core)") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit acb4b7df ] My static checker complains that ofdpa_neigh_del() can sometimes free "found". It just makes sense to use it first before deleting it. Fixes: ecf244f7 ("rocker: fix maybe-uninitialized warning") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 6b27c8ad ] In case a VLAN device is enslaved to a bridge we shouldn't create a router interface (RIF) for it when it's configured with an IP address. This is already handled by the driver for other types of netdevs, such as physical ports and LAG devices. If this IP address is then removed and the interface is subsequently unlinked from the bridge, a NULL pointer dereference can happen, as the original 802.1d FID was replaced with an rFID which was then deleted. To reproduce: $ ip link set dev enp3s0np9 up $ ip link add name enp3s0np9.111 link enp3s0np9 type vlan id 111 $ ip link set dev enp3s0np9.111 up $ ip link add name br0 type bridge $ ip link set dev br0 up $ ip link set enp3s0np9.111 master br0 $ ip address add dev enp3s0np9.111 192.168.0.1/24 $ ip address del dev enp3s0np9.111 192.168.0.1/24 $ ip link set dev enp3s0np9.111 nomaster Fixes: 99724c18 ("mlxsw: spectrum: Introduce support for router interfaces") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-by:
Petr Machata <petrm@mellanox.com> Tested-by:
-
Gao Feng authored
[ Upstream commit c1a4872e ] When qdisc fail to init, qdisc_create would invoke the destroy callback to cleanup. But there is no check if the callback exists really. So it would cause the panic if there is no real destroy callback like the qdisc codel, fq, and so on. Take codel as an example following: When a malicious user constructs one invalid netlink msg, it would cause codel_init->codel_change->nla_parse_nested failed. Then kernel would invoke the destroy callback directly but qdisc codel doesn't define one. It causes one panic as a result. Now add one the check for destroy to avoid the possible panic. Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation") Signed-off-by:
Gao Feng <gfree.wind@vip.163.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jason Wang authored
[ Upstream commit 713a98d9 ] We don't hold any tx lock when trying to disable TX during reset, this would lead a use after free since ndo_start_xmit() tries to access the virtqueue which has already been freed. Fix this by using netif_tx_disable() before freeing the vqs, this could make sure no tx after vq freeing. Reported-by:
Jean-Philippe Menil <jpmenil@gmail.com> Tested-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Robert McCabe <robert.mccabe@rockwellcollins.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 6f64ec74 ] Similar to the fix provided by Dominik Heidler in commit 9b3dc0a1 ("l2tp: cast l2tp traffic counter to unsigned") we need to take care of 32bit kernels in dev_get_stats(). When using atomic_long_read(), we add a 'long' to u64 and might misinterpret high order bit, unless we cast to unsigned. Fixes: caf586e5 ("net: add a core netdev->rx_dropped counter") Fixes: 015f0688 ("net: net: add a core netdev->tx_dropped counter") Fixes: 6e7333d3 ("net: add rx_nohandler stat counter") Signed-off-by:
-
WANG Cong authored
[ Upstream commit d747a7a5 ] We have to reset the sk->sk_rx_dst when we disconnect a TCP connection, because otherwise when we re-connect it this dst reference is simply overridden in tcp_finish_connect(). This fixes a dst leak which leads to a loopback dev refcnt leak. It is a long-standing bug, Kevin reported a very similar (if not same) bug before. Thanks to Andrei for providing such a reliable reproducer which greatly narrows down the problem. Fixes: 41063e9d ("ipv4: Early TCP socket demux.") Reported-by:
Andrei Vagin <avagin@gmail.com> Reported-by:
Kevin Xu <kaiwen.xu@hulu.com> Signed-off-by:
-
Richard Cochran authored
[ Upstream commit db9d8b29 ] The function, skb_complete_tx_timestamp(), used to allow passing in a NULL pointer for the time stamps, but that was changed in commit 62bccb8c ("net-timestamp: Make the clone operation stand-alone from phy timestamping"), and the existing call sites, all of which are in the dp83640 driver, were fixed up. Even though the kernel-doc was subsequently updated in commit 7a76a021 ("net-timestamp: Update skb_complete_tx_timestamp comment"), still a bug fix from Manfred Rudigier came into the driver using the old semantics. Probably Manfred derived that patch from an older kernel version. This fix should be applied to the stable trees as well. Fixes: 81e8f2e9 ("net: dp83640: Fix tx timestamp overflow handling.") Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Michal Kubeček authored
[ Upstream commit a5cb659b ] Our customer encountered stuck NFS writes for blocks starting at specific offsets w.r.t. page boundary caused by networking stack sending packets via UFO enabled device with wrong checksum. The problem can be reproduced by composing a long UDP datagram from multiple parts using MSG_MORE flag: sendto(sd, buff, 1000, MSG_MORE, ...); sendto(sd, buff, 1000, MSG_MORE, ...); sendto(sd, buff, 3000, 0, ...); Assume this packet is to be routed via a device with MTU 1500 and NETIF_F_UFO enabled. When second sendto() gets into __ip_append_data(), this condition is tested (among others) to decide whether to call ip_ufo_append_data(): ((length + fragheaderlen) > mtu) || (skb && skb_is_gso(skb)) At the moment, we already have skb with 1028 bytes of data which is not marked for GSO so that the test is false (fragheaderlen is usually 20). Thus we append second 1000 bytes to this skb without invoking UFO. Third sendto(), however, has sufficient length to trigger the UFO path so that we end up with non-UFO skb followed by a UFO one. Later on, udp_send_skb() uses udp_csum() to calculate the checksum but that assumes all fragments have correct checksum in skb->csum which is not true for UFO fragments. When checking against MTU, we need to add skb->len to length of new segment if we already have a partially filled skb and fragheaderlen only if there isn't one. In the IPv6 case, skb can only be null if this is the first segment so that we have to use headersize (length of the first IPv6 header) rather than fragheaderlen (length of IPv6 header of further fragments) for skb == NULL. Fixes: e89e9cf5 ("[IPv4/IPv6]: UFO Scatter-gather approach") Fixes: e4c5e13a ("ipv6: Should use consistent conditional judgement for ip6 fragment between __ip6_append_data and ip6_finish_output") Signed-off-by:
Vlad Yasevich <vyasevic@redhat.com> Signed-off-by:
-
Martin Habets authored
[ Upstream commit bb53f4d4 ] The 8000 series adapters uses catch-all filters for encapsulated traffic to support filtering VXLAN, NVGRE and GENEVE traffic. This new filter functionality requires a longer MCDI command. This patch increases the size of buffers on stack that were missed, which fixes a kernel panic from the stack protector. Fixes: 9b410801 ("sfc: insert catch-all filters for encapsulated traffic") Signed-off-by:
Martin Habets <mhabets@solarflare.com> Acked-by:
-
Arnd Bergmann authored
[ Upstream commit b92b7d33 ] This structure member is hidden behind CONFIG_SYSFS, and we get a build error when that is disabled: drivers/net/hyperv/netvsc_drv.c: In function 'netvsc_set_channels': drivers/net/hyperv/netvsc_drv.c:754:49: error: 'struct net_device' has no member named 'num_rx_queues'; did you mean 'num_tx_queues'? drivers/net/hyperv/netvsc_drv.c: In function 'netvsc_set_rxfh': drivers/net/hyperv/netvsc_drv.c:1181:25: error: 'struct net_device' has no member named 'num_rx_queues'; did you mean 'num_tx_queues'? As the value is only set once to the argument of alloc_netdev_mq(), we can compare against that constant directly. Fixes: ff4a4419 ("netvsc: allow get/set of RSS indirection table") Fixes: 2b01888d ("netvsc: allow more flexible setting of number of channels") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 60abc0be ] The per netns loopback_dev->ip6_ptr is unregistered and set to NULL when its mtu is set to smaller than IPV6_MIN_MTU, this leads to that we could set rt->rt6i_idev NULL after a rt6_uncached_list_flush_dev() and then crash after another call. In this case we should just bring its inet6_dev down, rather than unregistering it, at least prior to commit 176c39af ("netns: fix addrconf_ifdown kernel panic") we always override the case for loopback. Thanks a lot to Andrey for finding a reliable reproducer. Fixes: 176c39af ("netns: fix addrconf_ifdown kernel panic") Reported-by:
Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by:
-
Zach Brown authored
[ Upstream commit b866203d ] The commit ("net/phy: micrel: Add workaround for bad autoneg") fixes an autoneg failure case by resetting the hardware. This turns off intterupts. Things will work themselves out if the phy polls, as it will figure out it's state during a poll. However if the phy uses only intterupts, the phy will stall, since interrupts are off. This patch fixes the issue by calling config_intr after resetting the phy. Fixes: d2fd719b ("net/phy: micrel: Add workaround for bad autoneg ") Signed-off-by:
Zach Brown <zach.brown@ni.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
- 15 Jul, 2017 6 commits
-
-
Greg Kroah-Hartman authored
-
Mikulas Patocka authored
commit 99c13b8c upstream. The pat_enabled() logic is broken on CPUs which do not support PAT and where the initialization code fails to call pat_init(). Due to that the enabled flag stays true and pat_enabled() returns true wrongfully. As a consequence the mappings, e.g. for Xorg, are set up with the wrong caching mode and the required MTRR setups are omitted. To cure this the following changes are required: 1) Make pat_enabled() return true only if PAT initialization was invoked and successful. 2) Invoke init_cache_modes() unconditionally in setup_arch() and remove the extra callsites in pat_disable() and the pat disabled code path in pat_init(). Also rename __pat_enabled to pat_disabled to reflect the real purpose of this variable. Fixes: 9cd25aac ("x86/mm/pat: Emulate PAT when it is disabled") Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Bernhard Held <berny156@gmx.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: "Luis R. Rodriguez" <mcgrof@suse.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1707041749300.3456@file01.intranet.prod.int.rdu2.redhat.comSigned-off-by:
-
Chao Yu authored
commit 1ea1516f upstream. kstrtoull returns 0 on success, however, in reserved_clusters_store we will return -EINVAL if kstrtoull returns 0, it makes us fail to update reserved_clusters value through sysfs. Fixes: 76d33bcaSigned-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Miao Xie <miaoxie@huawei.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Jason A. Donenfeld authored
commit fec17cb2 upstream. Otherwise, we enable all sorts of forgeries via timing attack. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Suggested-by:
Stephan Müller <smueller@chronox.de> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: linux-crypto@vger.kernel.org Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Horia Geantă authored
commit 42cfcafb upstream. Changes in the SW cts (ciphertext stealing) code in commit 0605c41c ("crypto: cts - Convert to skcipher") revealed a problem in the CAAM driver: when cts(cbc(aes)) is executed and cts runs in SW, cbc(aes) is offloaded in CAAM; cts encrypts the last block in atomic context and CAAM incorrectly decides to use GFP_KERNEL for memory allocation. Fix this by allowing GFP_KERNEL (sleeping) only when MAY_SLEEP flag is set, i.e. remove MAY_BACKLOG flag. We split the fix in two parts - first is sent to -stable, while the second is not (since there is no known failure case). Link: http://lkml.kernel.org/g/20170602122446.2427-1-david@sigma-star.atReported-by:
David Gstir <david@sigma-star.at> Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
Ian Abbott authored
commit a9332e9a upstream. There is a clean-up bug in the core comedi module initialization functions, `comedi_init()`. If the `comedi_num_legacy_minors` module parameter is non-zero (and valid), it creates that many "legacy" devices and registers them in SysFS. A failure causes the function to clean up and return an error. Unfortunately, it fails to destroy the "comedi" class that was created earlier. Fix it by adding a call to `class_destroy(comedi_class)` at the appropriate place in the clean-up sequence. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
