- 14 Sep, 2021 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2021-09-14 The following pull-request contains BPF updates for your *net* tree. We've added 7 non-merge commits during the last 13 day(s) which contain a total of 18 files changed, 334 insertions(+), 193 deletions(-). The main changes are: 1) Fix mmap_lock lockdep splat in BPF stack map's build_id lookup, from Yonghong Song. 2) Fix BPF cgroup v2 program bypass upon net_cls/prio activation, from Daniel Borkmann. 3) Fix kvcalloc() BTF line info splat on oversized allocation attempts, from Bixuan Cui. 4) Fix BPF selftest build of task_pt_regs test for arm64/s390, from Jean-Philippe Brucker. 5) Fix BPF's disasm.{c,h} to dual-license so that it is aligned with bpftool given the former is a build dependency for the latter, from Daniel Borkmann with ACKs from contributors. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
syszbot triggers this warning, which looks something we can easily prevent. If we initialize priv->list_field in chnl_net_init(), then always use list_del_init(), we can remove robust_list_del() completely. WARNING: CPU: 0 PID: 3233 at net/caif/chnl_net.c:67 robust_list_del net/caif/chnl_net.c:67 [inline] WARNING: CPU: 0 PID: 3233 at net/caif/chnl_net.c:67 chnl_net_uninit+0xc9/0x2e0 net/caif/chnl_net.c:375 Modules linked in: CPU: 0 PID: 3233 Comm: syz-executor.3 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:robust_list_del net/caif/chnl_net.c:67 [inline] RIP: 0010:chnl_net_uninit+0xc9/0x2e0 net/caif/chnl_net.c:375 Code: 89 eb e8 3a a3 ba f8 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 bf 01 00 00 48 81 fb 00 14 4e 8d 48 8b 2b 75 d0 e8 17 a3 ba f8 <0f> 0b 5b 5d 41 5c 41 5d e9 0a a3 ba f8 4c 89 e3 e8 02 a3 ba f8 4c RSP: 0018:ffffc90009067248 EFLAGS: 00010202 RAX: 0000000000008780 RBX: ffffffff8d4e1400 RCX: ffffc9000fd34000 RDX: 0000000000040000 RSI: ffffffff88bb6e49 RDI: 0000000000000003 RBP: ffff88802cd9ee08 R08: 0000000000000000 R09: ffffffff8d0e6647 R10: ffffffff88bb6dc2 R11: 0000000000000000 R12: ffff88803791ae08 R13: dffffc0000000000 R14: 00000000e600ffce R15: ffff888073ed3480 FS: 00007fed10fa0700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2c322000 CR3: 00000000164a6000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: register_netdevice+0xadf/0x1500 net/core/dev.c:10347 ipcaif_newlink+0x4c/0x260 net/caif/chnl_net.c:468 __rtnl_newlink+0x106d/0x1750 net/core/rtnetlink.c:3458 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3506 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5572 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 __sys_sendto+0x21c/0x320 net/socket.c:2036 __do_sys_sendto net/socket.c:2048 [inline] __se_sys_sendto net/socket.c:2044 [inline] __x64_sys_sendto+0xdd/0x1b0 net/socket.c:2044 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: cc36a070 ("net-caif: add CAIF netdevice") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
- 13 Sep, 2021 20 commits
-
-
Daniel Borkmann authored
Minimal selftest which implements a small BPF policy program to the connect(2) hook which rejects TCP connection requests to port 60123 with EPERM. This is being attached to a non-root cgroup v2 path. The test asserts that this works under cgroup v2-only and under a mixed cgroup v1/v2 environment where net_classid is set in the former case. Before fix: # ./test_progs -t cgroup_v1v2 test_cgroup_v1v2:PASS:server_fd 0 nsec test_cgroup_v1v2:PASS:client_fd 0 nsec test_cgroup_v1v2:PASS:cgroup_fd 0 nsec test_cgroup_v1v2:PASS:server_fd 0 nsec run_test:PASS:skel_open 0 nsec run_test:PASS:prog_attach 0 nsec test_cgroup_v1v2:PASS:cgroup-v2-only 0 nsec run_test:PASS:skel_open 0 nsec run_test:PASS:prog_attach 0 nsec run_test:PASS:join_classid 0 nsec (network_helpers.c:219: errno: None) Unexpected success to connect to server test_cgroup_v1v2:FAIL:cgroup-v1v2 unexpected error: -1 (errno 0) #27 cgroup_v1v2:FAIL Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED After fix: # ./test_progs -t cgroup_v1v2 #27 cgroup_v1v2:OK Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210913230759.2313-3-daniel@iogearbox.net
-
Daniel Borkmann authored
Minimal set of helpers for net_cls classid cgroupv1 management in order to set an id, join from a process, initiate setup and teardown. cgroupv2 helpers are left as-is, but reused where possible. Signed-off-by:
-
Daniel Borkmann authored
Fix cgroup v1 interference when non-root cgroup v2 BPF programs are used. Back in the days, commit bd1060a1 ("sock, cgroup: add sock->sk_cgroup") embedded per-socket cgroup information into sock->sk_cgrp_data and in order to save 8 bytes in struct sock made both mutually exclusive, that is, when cgroup v1 socket tagging (e.g. net_cls/net_prio) is used, then cgroup v2 falls back to the root cgroup in sock_cgroup_ptr() (&cgrp_dfl_root.cgrp). The assumption made was "there is no reason to mix the two and this is in line with how legacy and v2 compatibility is handled" as stated in bd1060a1. However, with Kubernetes more widely supporting cgroups v2 as well nowadays, this assumption no longer holds, and the possibility of the v1/v2 mixed mode with the v2 root fallback being hit becomes a real security issue. Many of the cgroup v2 BPF programs are also used for policy enforcement, just to pick _one_ example, that is, to programmatically deny socket related system calls like connect(2) or bind(2). A v2 root fallback would implicitly cause a policy bypass for the affected Pods. In production environments, we have recently seen this case due to various circumstances: i) a different 3rd party agent and/or ii) a container runtime such as [0] in the user's environment configuring legacy cgroup v1 net_cls tags, which triggered implicitly mentioned root fallback. Another case is Kubernetes projects like kind [1] which create Kubernetes nodes in a container and also add cgroup namespaces to the mix, meaning programs which are attached to the cgroup v2 root of the cgroup namespace get attached to a non-root cgroup v2 path from init namespace point of view. And the latter's root is out of reach for agents on a kind Kubernetes node to configure. Meaning, any entity on the node setting cgroup v1 net_cls tag will trigger the bypass despite cgroup v2 BPF programs attached to the namespace root. Generally, this mutual exclusiveness does not hold anymore in today's user environments and makes cgroup v2 usage from BPF side fragile and unreliable. This fix adds proper struct cgroup pointer for the cgroup v2 case to struct sock_cgroup_data in order to address these issues; this implicitly also fixes the tradeoffs being made back then with regards to races and refcount leaks as stated in bd1060a1, and removes the fallback, so that cgroup v2 BPF programs always operate as expected. [0] https://github.com/nestybox/sysbox/ [1] https://kind.sigs.k8s.io/ Fixes: bd1060a1 ("sock, cgroup: add sock->sk_cgroup") Signed-off-by:
Stanislav Fomichev <sdf@google.com> Acked-by:
Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/bpf/20210913230759.2313-1-daniel@iogearbox.net
-
Bixuan Cui authored
Commit 7661809d ("mm: don't allow oversized kvmalloc() calls") add the oversize check. When the allocation is larger than what kmalloc() supports, the following warning triggered: WARNING: CPU: 0 PID: 8408 at mm/util.c:597 kvmalloc_node+0x108/0x110 mm/util.c:597 Modules linked in: CPU: 0 PID: 8408 Comm: syz-executor221 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:kvmalloc_node+0x108/0x110 mm/util.c:597 Call Trace: kvmalloc include/linux/mm.h:806 [inline] kvmalloc_array include/linux/mm.h:824 [inline] kvcalloc include/linux/mm.h:829 [inline] check_btf_line kernel/bpf/verifier.c:9925 [inline] check_btf_info kernel/bpf/verifier.c:10049 [inline] bpf_check+0xd634/0x150d0 kernel/bpf/verifier.c:13759 bpf_prog_load kernel/bpf/syscall.c:2301 [inline] __sys_bpf+0x11181/0x126e0 kernel/bpf/syscall.c:4587 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline] __se_sys_bpf kernel/bpf/syscall.c:4689 [inline] __x64_sys_bpf+0x78/0x90 kernel/bpf/syscall.c:4689 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Reported-by: syzbot+f3e749d4c662818ae439@syzkaller.appspotmail.com Signed-off-by:
Bixuan Cui <cuibixuan@huawei.com> Signed-off-by:
Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210911005557.45518-1-cuibixuan@huawei.com
-
David S. Miller authored
Guangbin Huang says: ==================== net: hns3: add some fixes for -net This series adds some fixes for the HNS3 ethernet driver. ==================== Signed-off-by: -
Jiaran Zhang authored
Currently, the VF does not clear the interrupt source immediately after receiving the interrupt. As a result, if the second interrupt task is triggered when processing the first interrupt task, clearing the interrupt source before exiting will clear the interrupt sources of the two tasks at the same time. As a result, no interrupt is triggered for the second task. The VF detects the missed message only when the next interrupt is generated. Clearing it immediately after executing check_evt_cause ensures that: 1. Even if two interrupt tasks are triggered at the same time, they can be processed. 2. If the second task is triggered during the processing of the first task and the interrupt source is not cleared, the interrupt is reported after vector0 is enabled. Fixes: b90fcc5b ("net: hns3: add reset handling for VF when doing Core/Global/IMP reset") Signed-off-by:
Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Jiaran Zhang authored
When the command for querying imp info is issued to the firmware, if the firmware does not support the command, the returned value of bd num is 0. Add protection mechanism before alloc memory to prevent apply for 0-length memory. Fixes: 0b198b0d ("net: hns3: refactor dump m7 info of debugfs") Signed-off-by:
-
Yufeng Mo authored
The firmware will not disable mac in flr process. Therefore, the driver needs to proactively disable mac during flr, which is the same as the function reset. Fixes: 35d93a30 ("net: hns3: adjust the process of PF reset") Signed-off-by:
Yufeng Mo <moyufeng@huawei.com> Signed-off-by:
-
Yufeng Mo authored
Currently, affinity_mask is set to a single cpu. As a result, irqbalance becomes invalid in SUBSET or EXACT mode. To solve this problem, change affinity_mask to numa node range. In this way, irqbalance can be performed on the cpu of the numa node. Fixes: 08125454 ("net: hns3: add interrupt affinity support for misc interrupt") Signed-off-by:
-
Yufeng Mo authored
The hardware cannot handle short tunnel frames below 65 bytes, and will cause vlan tag missing problem. So pads packet size to 65 bytes for tunnel frames to fix this bug. Fixes: 3db084d2("net: hns3: Fix for vxlan tx checksum bug") Signed-off-by:
-
Yunsheng Lin authored
When page pool is added to the hns3 driver, it is always enabled unconditionally, which means spilt page handling in the hns3 driver is dead code. As there is a requirement to test the performance between spilt page handling in driver and page pool, so add a module param to support disabling the page pool. When the page pool is proved to perform better in most case, the spilt page handling in driver can be removed. Fixes: 93188e96 ("net: hns3: support skb's frag page recycling based on page pool") Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Aleksander Jan Bajkowski authored
The delay is especially needed by the xRX300 and xRX330 SoCs. Without this patch, some phys are sometimes not properly detected. The patch was tested on BT Home Hub 5A and D-Link DWR-966. Fixes: a09d042b ("net: dsa: lantiq: allow to use all GPHYs on xRX300 and xRX330") Signed-off-by:
Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
zhang kai authored
only increase fib6_sernum in net namespace after add fib6_info successfully. Signed-off-by:
zhang kai <zhangkaiheb@126.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Hoang Le authored
In tipc_sk_enqueue() we use hardcoded 2 jiffies to extract socket buffer from generic queue to particular socket. The 2 jiffies is too short in case there are other high priority tasks get CPU cycles for multiple jiffies update. As result, no buffer could be enqueued to particular socket. To solve this, we switch to use constant timeout 20msecs. Then, the function will be expired between 2 jiffies (CONFIG_100HZ) and 20 jiffies (CONFIG_1000HZ). Fixes: c637c103 ("tipc: resolve race problem at unicast message reception") Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by:
-
Aya Levin authored
Turn udp_tunnel_nic work-queue to an ordered work-queue. This queue holds the UDP-tunnel configuration commands of the different netdevs. When the netdevs are functions of the same NIC the order of execution may be crucial. Problem example: NIC with 2 PFs, both PFs declare offload quota of up to 3 UDP-ports. $ifconfig eth2 1.1.1.1/16 up $ip link add eth2_19503 type vxlan id 5049 remote 1.1.1.2 dev eth2 dstport 19053 $ip link set dev eth2_19503 up $ip link add eth2_19504 type vxlan id 5049 remote 1.1.1.3 dev eth2 dstport 19054 $ip link set dev eth2_19504 up $ip link add eth2_19505 type vxlan id 5049 remote 1.1.1.4 dev eth2 dstport 19055 $ip link set dev eth2_19505 up $ip link add eth2_19506 type vxlan id 5049 remote 1.1.1.5 dev eth2 dstport 19056 $ip link set dev eth2_19506 up NIC RX port offload infrastructure offloads the first 3 UDP-ports (on all devices which sets NETIF_F_RX_UDP_TUNNEL_PORT feature) and not UDP-port 19056. So both PFs gets this offload configuration. $ip link set dev eth2_19504 down This triggers udp-tunnel-core to remove the UDP-port 19504 from offload-ports-list and offload UDP-port 19056 instead. In this scenario it is important that the UDP-port of 19504 will be removed from both PFs before trying to add UDP-port 19056. The NIC can stop offloading a UDP-port only when all references are removed. Otherwise the NIC may report exceeding of the offload quota. Fixes: cc4e3835 ("udp_tunnel: add central NIC RX port offload infrastructure") Signed-off-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
Yajun Deng authored
This reverts commit 91948309. There is only when ip_options_get() return zero need to free. It already called kfree() when return error. Fixes: 91948309 ("ipv4: fix memory leaks in ip_cmsg_send() callers") Signed-off-by:
Yajun Deng <yajun.deng@linux.dev> Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Bug fixes. The first patch fixes an error recovery regression just introduced about a week ago. The other two patches fix issues related to freeing rings in the bnxt_close() path under error conditions. ==================== Signed-off-by: -
Michael Chan authored
We recently changed the completion ring page arrays to be dynamically allocated to better support the expanded range of ring depths. The cleanup path for this was not quite complete. It might cause the shutdown path to crash if we need to abort before the completion ring arrays have been allocated and initialized. Fix it by initializing the ring_mem->pg_arr to NULL after freeing the completion ring page array. Add a check in bnxt_free_ring() to skip referencing the rmem->pg_arr if it is NULL. Fixes: 03c74487 ("bnxt_en: Don't use static arrays for completion ring pages") Reviewed-by:
Andy Gospodarek <gospo@broadcom.com> Reviewed-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Edwin Peer authored
The call to bnxt_free_mem(..., false) in the bnxt_half_open_nic() error path will deallocate ring descriptor memory via bnxt_free_?x_rings(), but because irq_re_init is false, the ring info itself is not freed. To simplify error paths, deallocation functions have generally been written to be safe when called on unallocated memory. It should always be safe to call dev_close(), which calls bnxt_free_skbs() a second time, even in this semi- allocated ring state. Calling bnxt_free_skbs() a second time with the rings already freed will cause NULL pointer dereference. Fix it by checking the rings are valid before proceeding in bnxt_free_tx_skbs() and bnxt_free_one_rx_ring_skbs(). Fixes: 975bc99a ("bnxt_en: Refactor bnxt_free_rx_skbs().") Signed-off-by:
-
Michael Chan authored
The recent patch has introduced a regression by not reading the reset count in the ERROR_RECOVERY async event handler. We may have just gone through a reset and the reset count has just incremented. If we don't update the reset count in the ERROR_RECOVERY event handler, the health check timer will see that the reset count has changed and will initiate an unintended reset. Restore the unconditional update of the reset count in bnxt_async_event_process() if error recovery watchdog is enabled. Also, update the reset count at the end of the reset sequence to make it even more robust. Fixes: 1b2b9183 ("bnxt_en: Fix possible unintended driver initiated error recovery") Reviewed-by:
-
- 12 Sep, 2021 3 commits
-
-
Len Baker authored
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the struct_size() helper to do the arithmetic instead of the argument "size + count * size" in the kzalloc() function. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-argumentsSigned-off-by:
Len Baker <len.baker@gmx.com> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Andrea Claudi authored
If altname deletion of the short alternative name fails, the error message printed is: "Failed to add short alternative name". This is obviously a typo, as we are testing altname deletion. Fix this using a proper error message. Fixes: f95e6c9c ("selftest: net: add alternative names test") Signed-off-by:
Andrea Claudi <aclaudi@redhat.com> Signed-off-by:
-
Ansuel Smith authored
When the mdio legacy mapping is used the mii_bus priv registered by DSA refer to the dsa switch struct instead of the qca8k_priv struct and causes a kernel panic. Create dedicated function when the internal dedicated mdio driver is used to properly handle the 2 different implementation. Fixes: 759bafb8 ("net: dsa: qca8k: add support for internal phy and internal mdio") Signed-off-by:
Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by:
-
- 11 Sep, 2021 1 commit
-
-
Jesper Nilsson authored
The Synopsys Ethernet IP uses the CSR clock as a base clock for MDC. The divisor used is set in the MAC_MDIO_Address register field CR (Clock Rate) The divisor is there to change the CSR clock into a clock that falls below the IEEE 802.3 specified max frequency of 2.5MHz. If the CSR clock is 300MHz, the code falls back to using the reset value in the MAC_MDIO_Address register, as described in the comment above this code. However, 300MHz is actually an allowed value and the proper divider can be estimated quite easily (it's just 1Hz difference!) A CSR frequency of 300MHz with the maximum clock rate value of 0x5 (STMMAC_CSR_250_300M, a divisor of 124) gives somewhere around ~2.42MHz which is below the IEEE 802.3 specified maximum. For the ARTPEC-8 SoC, the CSR clock is this problematic 300MHz, and unfortunately, the reset-value of the MAC_MDIO_Address CR field is 0x0. This leads to a clock rate of zero and a divisor of 42, and gives an MDC frequency of ~7.14MHz. Allow CSR clock of 300MHz by making the comparison inclusive. Signed-off-by:
Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by:
-
- 10 Sep, 2021 6 commits
-
-
Yonghong Song authored
Currently the bpf selftest "get_stack_raw_tp" triggered the warning: [ 1411.304463] WARNING: CPU: 3 PID: 140 at include/linux/mmap_lock.h:164 find_vma+0x47/0xa0 [ 1411.304469] Modules linked in: bpf_testmod(O) [last unloaded: bpf_testmod] [ 1411.304476] CPU: 3 PID: 140 Comm: systemd-journal Tainted: G W O 5.14.0+ #53 [ 1411.304479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 1411.304481] RIP: 0010:find_vma+0x47/0xa0 [ 1411.304484] Code: de 48 89 ef e8 ba f5 fe ff 48 85 c0 74 2e 48 83 c4 08 5b 5d c3 48 8d bf 28 01 00 00 be ff ff ff ff e8 2d 9f d8 00 85 c0 75 d4 <0f> 0b 48 89 de 48 8 [ 1411.304487] RSP: 0018:ffffabd440403db8 EFLAGS: 00010246 [ 1411.304490] RAX: 0000000000000000 RBX: 00007f00ad80a0e0 RCX: 0000000000000000 [ 1411.304492] RDX: 0000000000000001 RSI: ffffffff9776b144 RDI: ffffffff977e1b0e [ 1411.304494] RBP: ffff9cf5c2f50000 R08: ffff9cf5c3eb25d8 R09: 00000000fffffffe [ 1411.304496] R10: 0000000000000001 R11: 00000000ef974e19 R12: ffff9cf5c39ae0e0 [ 1411.304498] R13: 0000000000000000 R14: 0000000000000000 R15: ffff9cf5c39ae0e0 [ 1411.304501] FS: 00007f00ae754780(0000) GS:ffff9cf5fba00000(0000) knlGS:0000000000000000 [ 1411.304504] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1411.304506] CR2: 000000003e34343c CR3: 0000000103a98005 CR4: 0000000000370ee0 [ 1411.304508] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1411.304510] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1411.304512] Call Trace: [ 1411.304517] stack_map_get_build_id_offset+0x17c/0x260 [ 1411.304528] __bpf_get_stack+0x18f/0x230 [ 1411.304541] bpf_get_stack_raw_tp+0x5a/0x70 [ 1411.305752] RAX: 0000000000000000 RBX: 5541f689495641d7 RCX: 0000000000000000 [ 1411.305756] RDX: 0000000000000001 RSI: ffffffff9776b144 RDI: ffffffff977e1b0e [ 1411.305758] RBP: ffff9cf5c02b2f40 R08: ffff9cf5ca7606c0 R09: ffffcbd43ee02c04 [ 1411.306978] bpf_prog_32007c34f7726d29_bpf_prog1+0xaf/0xd9c [ 1411.307861] R10: 0000000000000001 R11: 0000000000000044 R12: ffff9cf5c2ef60e0 [ 1411.307865] R13: 0000000000000005 R14: 0000000000000000 R15: ffff9cf5c2ef6108 [ 1411.309074] bpf_trace_run2+0x8f/0x1a0 [ 1411.309891] FS: 00007ff485141700(0000) GS:ffff9cf5fae00000(0000) knlGS:0000000000000000 [ 1411.309896] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1411.311221] syscall_trace_enter.isra.20+0x161/0x1f0 [ 1411.311600] CR2: 00007ff48514d90e CR3: 0000000107114001 CR4: 0000000000370ef0 [ 1411.312291] do_syscall_64+0x15/0x80 [ 1411.312941] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1411.313803] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 1411.314223] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1411.315082] RIP: 0033:0x7f00ad80a0e0 [ 1411.315626] Call Trace: [ 1411.315632] stack_map_get_build_id_offset+0x17c/0x260 To reproduce, first build `test_progs` binary: make -C tools/testing/selftests/bpf -j60 and then run the binary at tools/testing/selftests/bpf directory: ./test_progs -t get_stack_raw_tp The warning is due to commit 5b78ed24 ("mm/pagemap: add mmap_assert_locked() annotations to find_vma*()") which added mmap_assert_locked() in find_vma() function. The mmap_assert_locked() function asserts that mm->mmap_lock needs to be held. But this is not the case for bpf_get_stack() or bpf_get_stackid() helper (kernel/bpf/stackmap.c), which uses mmap_read_trylock_non_owner() instead. Since mm->mmap_lock is not held in bpf_get_stack[id]() use case, the above warning is emitted during test run. This patch fixed the issue by (1). using mmap_read_trylock() instead of mmap_read_trylock_non_owner() to satisfy lockdep checking in find_vma(), and (2). droping lockdep for mmap_lock right before the irq_work_queue(). The function mmap_read_trylock_non_owner() is also removed since after this patch nobody calls it any more. Fixes: 5b78ed24 ("mm/pagemap: add mmap_assert_locked() annotations to find_vma*()") Suggested-by:
Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by:
Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Luigi Rizzo <lrizzo@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: linux-mm@kvack.org Link: https://lore.kernel.org/bpf/20210909155000.1610299-1-yhs@fb.com
-
Colin Ian King authored
The variable ret is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Shai Malin authored
Handle MFW (management FW) error response in order to avoid a crash during recovery flows. Changes from v1: - Add "Fixes tag". Fixes: tag 5e7ba042 ("qed: Fix reading stale configuration information") Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
Shai Malin <smalin@marvell.com> Signed-off-by:
-
Baruch Siach authored
Add pr_fmt macro to spell out the source of messages in prefix. Before this patch: packet size is too long (1543 > 1518) With this patch: af_packet: packet size is too long (1543 > 1518) Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
Florian Fainelli authored
A number of users have reported that they were not able to get the PHY to successfully link up, especially after commit c36757eb ("net: phy: consider AN_RESTART status when reading link status") where we stopped reading just BMSR, but we also read BMCR to determine the link status. Andrius at NetBSD did a wonderful job at debugging the problem and found out that the MDIO bus clock frequency would be incorrectly set back to its default value which would prevent the MDIO bus controller from reading PHY registers properly. Back when we only read BMSR, if we read all 1s, we could falsely indicate a link status, though in general there is a cable plugged in, so this went unnoticed. After a second read of BMCR was added, a wrong read will lead to the inability to determine a link UP condition which is when it started to be visibly broken, even if it was long before that. The fix consists in restoring the value of the MD_CSR register that was set prior to the MAC reset. Link: http://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=53494 Fixes: 90f750a8 ("r6040: consolidate MAC reset to its own function") Reported-by:
Andrius V <vezhlys@gmail.com> Reported-by:
Darek Strugacz <darek.strugacz@op.pl> Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Dave Ertman authored
There are two cases where the current PF does not support RDMA functionality. The first is if the NVM loaded on the device is set to not support RDMA (common_caps.rdma is false). The second is if the kernel bonding driver has included the current PF in an active link aggregate. When the driver has determined that this PF does not support RDMA, then auxiliary devices should not be created on the auxiliary bus. Without a device on the auxiliary bus, even if the irdma driver is present, there will be no RDMA activity attempted on this PF. Currently, in the reset flow, an attempt to create auxiliary devices is performed without regard to the ability of the PF. There needs to be a check in ice_aux_plug_dev (as the central point that creates auxiliary devices) to see if the PF is in a state to support the functionality. When disabling and re-enabling RDMA due to the inclusion/removal of the PF in a link aggregate, we also need to set/clear the bit which controls auxiliary device creation so that a reset recovery in a link aggregate situation doesn't try to create auxiliary devices when it shouldn't. Fixes: f9f5301e ("ice: Register auxiliary device to provide RDMA") Reported-by:
Yongxin Liu <yongxin.liu@windriver.com> Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
- 09 Sep, 2021 8 commits
-
-
Guenter Roeck authored
Building alpha:allmodconfig results in the following error. drivers/net/ethernet/amd/ni65.c: In function 'ni65_stop_start': drivers/net/ethernet/amd/ni65.c:751:37: error: cast from pointer to integer of different size buffer[i] = (u32) isa_bus_to_virt(tmdp->u.buffer); 'buffer[]' is declared as unsigned long, so replace the typecast to u32 with a typecast to unsigned long to fix the problem. Cc: Arnd Bergmann <arnd@kernel.org> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
David S. Miller authored
Íñigo Huguet says: ==================== sfc: fallback for lack of xdp tx queues If there are not enough hardware resources to allocate one tx queue per CPU for XDP, XDP_TX and XDP_REDIRECT actions were unavailable, and using them resulted each time with the packet being drop and this message in the logs: XDP TX failed (-22) These patches implement 2 fallback solutions for 2 different situations that might happen: 1. There are not enough free resources for all the tx queues, but there are some free resources available 2. There are not enough free resources at all for tx queues. Both solutions are based in sharing tx queues, using __netif_tx_lock for synchronization. In the second case, as there are not XDP TX queues to share, network stack queues are used instead, but since we're taking __netif_tx_lock, concurrent access to the queues is correctly protected. The solution for this second case might affect performance both of XDP traffic and normal traffice due to lock contention if both are used intensively. That's why I call it a "last resort" fallback: it's not a desirable situation, but at least we have XDP TX working. Some tests has shown good results and indicate that the non-fallback case is not being damaged by this changes. They are also promising for the fallback cases. This is the test: 1. From another machine, send high amount of packets with pktgen, script samples/pktgen/pktgen_sample04_many_flows.sh 2. In the tested machine, run samples/bpf/xdp_rxq_info with arguments "-a XDP_TX --swapmac" and see the results 3. In the tested machine, run also pktgen_sample04 to create high TX normal traffic, and see how xdp_rxq_info results vary Note that this test doesn't check the worst situations for the fallback solutions because XDP_TX will only be executed from the same CPUs that are processed by sfc, and not from every CPU in the system, so the performance drop due to the highest locking contention doesn't happen. I'd like to test that, as well, but I don't have access right now to a proper environment. Test results: Without doing TX: Before changes: ~2,900,000 pps After changes, 1 queues/core: ~2,900,000 pps After changes, 2 queues/core: ~2,900,000 pps After changes, 8 queues/core: ~2,900,000 pps After changes, borrowing from network stack: ~2,900,000 pps With multiflow TX at the same time: Before changes: ~1,700,000 - 2,900,000 pps After changes, 1 queues/core: ~1,700,000 - 2,900,000 pps After changes, 2 queues/core: ~1,700,000 pps After changes, 8 queues/core: ~1,700,000 pps After changes, borrowing from network stack: 1,150,000 pps Sporadic "XDP TX failed (-5)" warnings are shown when running xdp program and pktgen simultaneously. This was expected because XDP doesn't have any buffering system if the NIC is under very high pressure. Thousands of these warnings are shown in the case of borrowing net stack queues. As I said before, this was also expected. ==================== Signed-off-by: -
Íñigo Huguet authored
Previous patch addressed the situation of having some free resources for xdp tx but not enough for one tx queue per CPU. This patch address the worst case of not having resources at all for xdp tx. Instead of using queues dedicated to xdp, normal queues used by network stack are shared for both cases, using __netif_tx_lock for synchronization. Also queue stop/restart must be considered in the xdp path to avoid freezing the queue. This is not the ideal situation we might want to be, and a performance penalty is expected both for normal and xdp traffic, but at least XDP will work in all possible situations (with a warning in the logs), improving a bit the pain of not knowing in what situations we can use it and in what situations we cannot. Signed-off-by:
Íñigo Huguet <ihuguet@redhat.com> Signed-off-by:
-
Íñigo Huguet authored
If there are not enough resources to allocate one TX queue per core for XDP TX it was completely disabled. This patch implements a fallback solution for sharing the available queues using __netif_tx_lock for synchronization. In the normal case that there is one TX queue per CPU, no locking is done, as it was before. With this fallback solution, XDP TX will work in much more cases that were failing, specially in machines with many CPUs. It's hard for XDP users to know what features are supported across different NICs and configurations, so they will benefit on having wider support. Signed-off-by:
-
Joakim Zhang authored
Use __maybe_unused for noirq_suspend()/noirq_resume() hooks to avoid build warning with !CONFIG_PM_SLEEP: >> drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:796:12: error: 'stmmac_pltfr_noirq_resume' defined but not used [-Werror=unused-function] 796 | static int stmmac_pltfr_noirq_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~ >> drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:775:12: error: 'stmmac_pltfr_noirq_suspend' defined but not used [-Werror=unused-function] 775 | static int stmmac_pltfr_noirq_suspend(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Fixes: 276aae37 ("net: stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume") Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by:
-
Xiyu Yang authored
The reference count leak issue may take place in an error handling path. If both conditions of tunnel->version == L2TP_HDR_VER_3 and the return value of l2tp_v3_ensure_opt_in_linear is nonzero, the function would directly jump to label invalid, without decrementing the reference count of the l2tp_session object session increased earlier by l2tp_tunnel_get_session(). This may result in refcount leaks. Fix this issue by decrease the reference count before jumping to the label invalid. Fixes: 4522a70d ("l2tp: fix reading optional fields of L2TPv3") Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Signed-off-by:
-
Eric Dumazet authored
syzbot reported another data-race in af_unix [1] Lets change __skb_insert() to use WRITE_ONCE() when changing skb head qlen. Also, change unix_dgram_poll() to use lockless version of unix_recvq_full() It is verry possible we can switch all/most unix_recvq_full() to the lockless version, this will be done in a future kernel version. [1] HEAD commit: 8596e589 BUG: KCSAN: data-race in skb_queue_tail / unix_dgram_poll write to 0xffff88814eeb24e0 of 4 bytes by task 25815 on cpu 0: __skb_insert include/linux/skbuff.h:1938 [inline] __skb_queue_before include/linux/skbuff.h:2043 [inline] __skb_queue_tail include/linux/skbuff.h:2076 [inline] skb_queue_tail+0x80/0xa0 net/core/skbuff.c:3264 unix_dgram_sendmsg+0xff2/0x1600 net/unix/af_unix.c:1850 sock_sendmsg_nosec net/socket.c:703 [inline] sock_sendmsg net/socket.c:723 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2392 ___sys_sendmsg net/socket.c:2446 [inline] __sys_sendmmsg+0x315/0x4b0 net/socket.c:2532 __do_sys_sendmmsg net/socket.c:2561 [inline] __se_sys_sendmmsg net/socket.c:2558 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2558 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88814eeb24e0 of 4 bytes by task 25834 on cpu 1: skb_queue_len include/linux/skbuff.h:1869 [inline] unix_recvq_full net/unix/af_unix.c:194 [inline] unix_dgram_poll+0x2bc/0x3e0 net/unix/af_unix.c:2777 sock_poll+0x23e/0x260 net/socket.c:1288 vfs_poll include/linux/poll.h:90 [inline] ep_item_poll fs/eventpoll.c:846 [inline] ep_send_events fs/eventpoll.c:1683 [inline] ep_poll fs/eventpoll.c:1798 [inline] do_epoll_wait+0x6ad/0xf00 fs/eventpoll.c:2226 __do_sys_epoll_wait fs/eventpoll.c:2238 [inline] __se_sys_epoll_wait fs/eventpoll.c:2233 [inline] __x64_sys_epoll_wait+0xf6/0x120 fs/eventpoll.c:2233 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000001b -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 25834 Comm: syz-executor.1 Tainted: G W 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 86b18aaa ("skbuff: fix a data race in skb_queue_len()") Cc: Qian Cai <cai@lca.pw> Signed-off-by:
-
Tong Zhang authored
plat_dev->dev->platform_data is released by platform_device_unregister(), use of pclk and hclk is a use-after-free. Since device unregister won't need a clk device we adjust the function call sequence to fix this issue. [ 31.261225] BUG: KASAN: use-after-free in macb_remove+0x77/0xc6 [macb_pci] [ 31.275563] Freed by task 306: [ 30.276782] platform_device_release+0x25/0x80 Suggested-by:
Nicolas Ferre <Nicolas.Ferre@microchip.com> Signed-off-by:
Tong Zhang <ztong0001@gmail.com> Acked-by:
-
