The constants are used by both the name server and clients, so clarify
their value and move them to the uapi header.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rather than manually waking up any context sleeping on the sock to
signal an error we should call sk_error_report(). This has the added
benefit that in-kernel consumers can override this notification with
its own callback.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following sparse warnings:

drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c:464:5: warning:
 symbol 'hns3_change_all_ring_bd_num' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c:477:5: warning:
 symbol 'hns3_set_ringparam' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Calling setup_timer() is redundant when DEFINE_TIMER() has been used.

Cc: Chas Williams <3chas3@gmail.com>
Cc: linux-atm-general@lists.sourceforge.net
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change the return error code to EINVAL if the MAC
address is not valid in the set_wol function.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for the TI  DP83822 10/100Mbit ethernet phy.

The DP83822 provides flexibility to connect to a MAC through a
standard MII, RMII or RGMII interface.

In addition the DP83822 needs to be removed from the DP83848 driver
as the WoL support is added here for this device.

Datasheet:
http://www.ti.com/product/DP83822I/datasheetSigned-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Egil Hjelmeland says:

====================
lan9303: Add basic offloading of unicast traffic

This series add basic offloading of unicast traffic to the lan9303
DSA driver.

Review welcome!

Changes v1 -> v2:
 - Patch 1: Codestyle linting.
 - Patch 2: Remember SWE_PORT_STATE while not bridged.
            Added constant LAN9303_SWE_PORT_MIRROR_DISABLED.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When both user ports are joined to the same bridge, the normal
HW MAC learning is enabled. This means that unicast traffic is forwarded
in HW.

If one of the user ports leave the bridge,
the ports goes back to the initial separated operation.

Port separation relies on disabled HW MAC learning. Hence the condition
that both ports must join same bridge.

Add brigde methods port_bridge_join, port_bridge_leave and
port_stp_state_set.
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prepare for next patch:
Move tag setup from lan9303_separate_ports() to new function
lan9303_setup_tagging()
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yury reported crash with this signature :

[  554.034021] [<ffff80003ccd5a58>] 0xffff80003ccd5a58
[  554.034156] [<ffff00000888fd34>] skb_release_all+0x14/0x30
[  554.034288] [<ffff00000888fd64>] __kfree_skb+0x14/0x28
[  554.034409] [<ffff0000088ece6c>] tcp_sendmsg_locked+0x4dc/0xcc8
[  554.034541] [<ffff0000088ed68c>] tcp_sendmsg+0x34/0x58
[  554.034659] [<ffff000008919fd4>] inet_sendmsg+0x2c/0xf8
[  554.034783] [<ffff0000088842e8>] sock_sendmsg+0x18/0x30
[  554.034928] [<ffff0000088861fc>] SyS_sendto+0x84/0xf8

Problem is that skb->destructor contains garbage, and this is
because I accidentally removed tcp_skb_tsorted_anchor_cleanup()
from tcp_unlink_write_queue()

This would trigger with a write(fd, <invalid_memory>, len) attempt,
and we will add to packetdrill this capability to avoid future
regressions.

Fixes: 75c119af ("tcp: implement rb-tree based retransmit queue")
Reported-by: Yury Norov <ynorov@caviumnetworks.com>
Tested-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-next-for-davem-2017-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Work continues in various areas:
 * port authorized event for 4-way-HS offload (Avi)
 * enable MFP optional for such devices (Emmanuel)
 * Kees's timer setup patch for mac80211 mesh
   (the part that isn't trivially scripted)
 * improve VLAN vs. TXQ handling (myself)
 * load regulatory database as firmware file (myself)
 * with various other small improvements and cleanups

I merged net-next once in the meantime to allow Kees's
timer setup patch to go in.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently CRDA implements the signature checking, and the previous
commits added the ability to load the whole regulatory database
into the kernel.

However, we really can't lose the signature checking, so implement
it in the kernel by loading a detached signature (regulatory.db.p7s)
and check it against built-in keys.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Parsing and building C structures from a regdb is no longer needed
since the "firmware" file (regulatory.db) can be linked into the
kernel image to achieve the same effect.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

If the regulatory database is loaded, and then updated, it may
be necessary to reload it. Add an nl80211 command to do this.

Note that this just reloads the database, it doesn't re-apply
the rules from it immediately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

As the current regulatory database is only about 4k big, and already
difficult to extend, we decided that overall it would be better to
get rid of the complications with CRDA and load the database into the
kernel directly, but in a new format that is extensible.

The new file format can be extended since it carries a length field
on all the structs that need to be extensible.

In order to be able to request firmware when the module initializes,
move cfg80211 from subsys_initcall() to the later fs_initcall(); the
firmware loader is at the same level but linked earlier, so it can
be called from there. Otherwise, when both the firmware loader and
cfg80211 are built-in, the request will crash the kernel. We also
need to be before device_initcall() so that cfg80211 is available
for devices when they initialize.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When removing an AP VLAN interface, mac80211 currently purges
the entire TXQ for the AP interface. Fix this by using the FQ
API introduced in the previous patch to filter frames.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Add to the FQ API a way to filter a given tin, in order to
remove frames that fulfil certain criteria according to a
filter function.

This will be used by mac80211 to remove frames belonging to
an AP VLAN interface that's being removed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Currently, the aes_ccm.c and aes_gcm.c are almost line by line copy of
each other. This patch reduce code redundancy by moving the code in these
two files to crypto/aead_api.c to make it a higher level aead api. The
file aes_ccm.c and aes_gcm.c are removed and all the functions there are
now implemented in their headers using the newly added aead api.
Signed-off-by: Xiang Gao <qasdfgtyuiop@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Update my MAINTAINERS file entries to list all the right files.
Since I'm also the de-facto wireless extensions maintainer,
there's little point in excluding those.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

This adds a ct_clear action for clearing conntrack state. ct_clear is
currently implemented in OVS userspace, but is not backed by an action
in the kernel datapath. This is useful for flows that may modify a
packet tuple after a ct lookup has already occurred.
Signed-off-by: Eric Garver <e@erig.me>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If CONFIG_DST_CACHE is not selected cpu variable
will be unused and we will see a compilation warning.
Move it under the ifdef.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: d66f2b91 ("bpf: don't rely on the verifier lock for metadata_dst allocation")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
1GbE Intel Wired LAN Driver Updates 2017-10-10

This series contains updates to e1000e and igb.

Benjamin Poirier provides several fixes for e1000e, starting with a
correction to the return status which was always returning success even
if it was not successful.  Fixed code comments to reflect the actual
code behavior.  Fixed the conditional test for the correct return
value.  Fixed a potential race condition reported by Lennart Sorensen,
where the single flag get_link_status is used to signal two different
states.

Sasha fixes a buffer overrun for i219 devices, where the chipset had
reduced the round-trip latency for the LAN controller DMA accesses
which in some high performance cases caused a buffer overrun while
processing the DMA transactions.

Willem de Bruijn changes the default behavior of e1000e to use the
burst mode settings by default unless the user specifies the
receive interrupt delay (RxIntDelay).

Florian Fainelli updates the driver to differentiate between when
e1000e_put_txbuf() is called from normal reclamation or when a
DMA mapping failure to make the driver more "drop monitor friendly".

Christophe JAILLET fixes a potential NULL pointer dereference by
properly returning -ENOMEM on memory allocation failures.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We can now piggyback error strings to userspace via extended acks
rather than using printk.

Before:
bridge fdb add 01:02:03:04:05:06 dev br0 vlan 4095
RTNETLINK answers: Invalid argument

After:
bridge fdb add 01:02:03:04:05:06 dev br0 vlan 4095
Error: invalid vlan id.

v3: drop 'RTM_' prefixes, suggested by David Ahern, they
are not useful, the add/del in bridge command line is enough.

Also reword error in response to malformed/bad vlan id attribute
size.

Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

exercise RTM_GETNETCONF call path for unspec, inet and inet6
families, they are DOIT_UNLOCKED candidates.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tariq Toukan says:

====================
mlx4_en num of rings

This patchset from Inbar contains changes to rings control
to the mlx4 Eth driver.

Patches 1 and 2 limit the number of rings to the number of CPUs.
Patch 3 removes a limitation in logic of default number of RX rings.

Series generated against net-next commit:
812b5ca7 Add a driver for Renesas uPD60620 and uPD60620A PHYs
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove limitation of netif_get_num_default_rss_queues()
from logic of RX rings default number.
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Limit the number of RX rings by the number of cores
in the system.
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Limit the number of TX rings per UP by the number of cores
in the system.
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Lipeng says:

====================
Support set_ringparam and {set|get}_rxnfc ethtool commands

1, Patch [1/5,2/5] add support for ethtool ops set_ringparam
   (ethtool -G) and fix related bug.
2, Patch [3/5,4/5, 5/5] add support for ethtool ops
   set_rxnfc/get_rxnfc (-n/-N) and fix related bug.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fix the ring count for ETHTOOL_GRXRINGS. Ring count
not TC size should be return for command "ethtool -n ethx".
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch add support for ethtool's ETHTOOL_GRXFH in hns3_get_rxnfc().
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch supports the ethtool's set_rxnfc().
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch supports the ethtool's set_ringparam().
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the ring index in hns3_fini_ring.
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add 0x50aa and 0x50ab T5 device id's.
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for new flash parts identification, and
also cleanup the flash Part identifying and decoding
code.

Based on the original work of Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix BUG() calls to use BUG_ON(conditional) macros.

This was found using make coccicheck M=net/core on linux next
tag next-2017092
Signed-off-by: Tim Hansen <devtimhansen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
bpf: get rid of global verifier state and reuse instruction printer

This set started off as simple extraction of eBPF verifier's instruction
printer into a separate file but evolved into removal of global state.
The purpose of moving instruction printing code is to be able to reuse it
from the bpftool.

As far as the global verifier lock goes, this set removes the global
variables relating to the log buffer, makes the one-time init done
by bpf_get_skb_set_tunnel_proto() not depend on any external locking,
and performs verifier log writeback as data is produced removing the need
for allocating a potentially large temporary buffer.

The final step of actually removing the verifier lock is left to someone
more competent and self-confident :)

Note that struct bpf_verifier_env is just 40B under two pages now,
we should probably switch to vzalloc() when it's expanded again...

v2:
 - add a selftest;
 - use env buffer and flush on every print (Alexei);
 - handle kernel log allocation failures (Daniel);
 - put the env log members into a struct (Daniel).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Verifier log buffer can be quite large (up to 16MB currently).
As Eric Dumazet points out if we allow multiple verification
requests to proceed simultaneously, malicious user may use the
verifier as a way of allocating large amounts of unswappable
memory to OOM the host.

Switch to a strategy of allocating a smaller buffer (1024B)
and writing it out into the user buffer after every print.

While at it remove the old BUG_ON().

This is in preparation of the global verifier lock removal.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

bpf_skb_set_tunnel_*() functions require allocation of per-cpu
metadata_dst.  The allocation happens upon verification of the
first program using those helpers.  In preparation for removing
the verifier lock, use cmpxchg() to make sure we only allocate
the metadata_dsts once.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>