- 13 Jul, 2021 8 commits
-
-
David S. Miller authored
Íñigo Huguet says: ==================== sfc: Fix lack of XDP TX queues A change introduced in commit e26ca4b5 ("sfc: reduce the number of requested xdp ev queues") created a bug in XDP_TX and XDP_REDIRECT because it unintentionally reduced the number of XDP TX queues, letting not enough queues to have one per CPU, which leaded to errors if XDP TX/REDIRECT was done from a high numbered CPU. This patchs make the following changes: - Fix the bug mentioned above - Revert commit 99ba0ea6 ("sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues") which intended to fix a related problem, created by mentioned bug, but it's no longer necessary - Add a new error log message if there are not enough resources to make XDP_TX/REDIRECT work V1 -> V2: keep the calculation of how many tx queues can handle a single event queue, but apply the "max. tx queues per channel" upper limit. V2 -> V3: WARN_ON if the number of initialized XDP TXQs differs from the expected. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Íñigo Huguet authored
If it's not possible to allocate enough channels for XDP, XDP_TX and XDP_REDIRECT don't work. However, only a message saying that not enough channels were available was shown, but not saying what are the consequences in that case. The user didn't know if he/she can use XDP or not, if the performance is reduced, or what. Signed-off-by:
Íñigo Huguet <ihuguet@redhat.com> Signed-off-by:
-
Íñigo Huguet authored
Commit 99ba0ea6 ("sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues") intended to fix a problem caused by a round up when calculating the number of XDP channels and queues. However, this was not the real problem. The real problem was that the number of XDP TX queues had been reduced to half in commit e26ca4b5 ("sfc: reduce the number of requested xdp ev queues"), but the variable xdp_tx_queue_count had remained the same. Once the correct number of XDP TX queues is created again in the previous patch of this series, this also can be reverted since the error doesn't actually exist. Only in the case that there is a bug in the code we can have different values in xdp_queue_number and efx->xdp_tx_queue_count. Because of this, and per Edward Cree's suggestion, I add instead a WARN_ON to catch if it happens again in the future. Note that the number of allocated queues can be higher than the number of used ones due to the round up, as explained in the existing comment in the code. That's why we also have to stop increasing xdp_queue_number beyond efx->xdp_tx_queue_count. Signed-off-by:
-
Íñigo Huguet authored
Fixes: e26ca4b5 sfc: reduce the number of requested xdp ev queues The buggy commit intended to allocate less channels for XDP in order to be more unlikely to reach the limit of 32 channels of the driver. The idea was to use each IRQ/eventqeue for more XDP TX queues than before, calculating which is the maximum number of TX queues that one event queue can handle. For example, in EF10 each event queue could handle up to 8 queues, better than the 4 they were handling before the change. This way, it would have to allocate half of channels than before for XDP TX. The problem is that the TX queues are also contained inside the channel structs, and there are only 4 queues per channel. Reducing the number of channels means also reducing the number of queues, resulting in not having the desired number of 1 queue per CPU. This leads to getting errors on XDP_TX and XDP_REDIRECT if they're executed from a high numbered CPU, because there only exist queues for the low half of CPUs, actually. If XDP_TX/REDIRECT is executed in a low numbered CPU, the error doesn't happen. This is the error in the logs (repeated many times, even rate limited): sfc 0000:5e:00.0 ens3f0np0: XDP TX failed (-22) This errors happens in function efx_xdp_tx_buffers, where it expects to have a dedicated XDP TX queue per CPU. Reverting the change makes again more likely to reach the limit of 32 channels in machines with many CPUs. If this happen, no XDP_TX/REDIRECT will be possible at all, and we will have this log error messages: At interface probe: sfc 0000:5e:00.0: Insufficient resources for 12 XDP event queues (24 other channels, max 32) At every subsequent XDP_TX/REDIRECT failure, rate limited: sfc 0000:5e:00.0 ens3f0np0: XDP TX failed (-22) However, without reverting the change, it makes the user to think that everything is OK at probe time, but later it fails in an unpredictable way, depending on the CPU that handles the packet. It is better to restore the predictable behaviour. If the user sees the error message at probe time, he/she can try to configure the best way it fits his/her needs. At least, he/she will have 2 options: - Accept that XDP_TX/REDIRECT is not available (he/she may not need it) - Load sfc module with modparam 'rss_cpus' with a lower number, thus creating less normal RX queues/channels, letting more free resources for XDP, with some performance penalty. Anyway, let the calculation of maximum TX queues that can be handled by a single event queue, and use it only if it's less than the number of TX queues per channel. This doesn't happen in practice, but could happen if some constant values are tweaked in the future, such us EFX_MAX_TXQ_PER_CHANNEL, EFX_MAX_EVQ_SIZE or EFX_MAX_DMAQ_SIZE. Related mailing list thread: https://lore.kernel.org/bpf/20201215104327.2be76156@carbon/Signed-off-by:
-
Pavel Skripkin authored
fp is netdev private data and it cannot be used after free_netdev() call. Using fp after free_netdev() can cause UAF bug. Fix it by moving free_netdev() after error message. Fixes: 61414f5e ("FDDI: defza: Add support for DEC FDDIcontroller 700 TURBOchannel adapter") Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
In May 2019 when commit 640f763f ("net: dsa: sja1105: Add support for Spanning Tree Protocol") was introduced, the comment that "STP does not get called for the CPU port" was true. This changed after commit 0394a63a ("net: dsa: enable and disable all ports") in August 2019 and went largely unnoticed, because the sja1105_bridge_stp_state_set() method did nothing different compared to the static setup done by sja1105_init_mac_settings(). With the ability to turn address learning off introduced by the blamed commit, there is a new priv->learn_ena port mask in the driver. When sja1105_bridge_stp_state_set() gets called and we are in BR_STATE_LEARNING or later, address learning is enabled or not depending on priv->learn_ena & BIT(port). So what happens is that priv->learn_ena is not being set from anywhere for the CPU port, and the static configuration done by sja1105_init_mac_settings() is being overwritten. To solve this, acknowledge that the static configuration of STP state is no longer necessary because the STP state is being set by the DSA core now, but what is necessary is to set priv->learn_ena for the CPU port. Fixes: 4d942354 ("net: dsa: sja1105: offload bridge port flags to device") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
The point with a *dev and a *brport_dev is that when we have a LAG net device that is a bridge port, *dev is an ocelot net device and *brport_dev is the bonding/team net device. The ocelot net device beneath the LAG does not exist from the bridge's perspective, so we need to sync the switchdev objects belonging to the brport_dev and not to the dev. Fixes: e4bd44e8 ("net: ocelot: replay switchdev events when joining bridge") Signed-off-by:
-
Yajun Deng authored
It has 'if (err >0 )' statement in nlmsg_unicast(), so use nlmsg_unicast() instead of netlink_unicast(), this looks more concise. v2: remove the change in netfilter. Signed-off-by:
Yajun Deng <yajun.deng@linux.dev> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
- 12 Jul, 2021 3 commits
-
-
Colin Ian King authored
In the case where act->id is FLOW_ACTION_POLICE and also act->police.rate_bytes_ps > 0 or act->police.rate_pkt_ps is not > 0 the boolean variable pps contains an uninitialized value when function otx2_tc_act_set_police is called. Fix this by initializing pps to false. Addresses-Coverity: ("Uninitialized scalar variable)" Fixes: 68fbff68 ("octeontx2-pf: Add police action for TC flower") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Vasily Averin authored
When TEE target mirrors traffic to another interface, sk_buff may not have enough headroom to be processed correctly. ip_finish_output2() detect this situation for ipv4 and allocates new skb with enogh headroom. However ipv6 lacks this logic in ip_finish_output2 and it leads to skb_under_panic: skbuff: skb_under_panic: text:ffffffffc0866ad4 len:96 put:24 head:ffff97be85e31800 data:ffff97be85e317f8 tail:0x58 end:0xc0 dev:gre0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:110! invalid opcode: 0000 [#1] SMP PTI CPU: 2 PID: 393 Comm: kworker/2:2 Tainted: G OE 5.13.0 #13 Hardware name: Virtuozzo KVM, BIOS 1.11.0-2.vz7.4 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x48/0x4a Call Trace: skb_push.cold.111+0x10/0x10 ipgre_header+0x24/0xf0 [ip_gre] neigh_connected_output+0xae/0xf0 ip6_finish_output2+0x1a8/0x5a0 ip6_output+0x5c/0x110 nf_dup_ipv6+0x158/0x1000 [nf_dup_ipv6] tee_tg6+0x2e/0x40 [xt_TEE] ip6t_do_table+0x294/0x470 [ip6_tables] nf_hook_slow+0x44/0xc0 nf_hook.constprop.34+0x72/0xe0 ndisc_send_skb+0x20d/0x2e0 ndisc_send_ns+0xd1/0x210 addrconf_dad_work+0x3c8/0x540 process_one_work+0x1d1/0x370 worker_thread+0x30/0x390 kthread+0x116/0x130 ret_from_fork+0x22/0x30 Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
-
Randy Dunlap authored
Rename module_init & module_exit functions that are named "mod_init" and "mod_exit" so that they are unique in both the System.map file and in initcall_debug output instead of showing up as almost anonymous "mod_init". This is helpful for debugging and in determining how long certain module_init calls take to execute. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: netdev@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Martin Schiller <ms@dev.tdt.de> Cc: linux-x25@vger.kernel.org Signed-off-by:
-
- 11 Jul, 2021 5 commits
-
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== net: bridge: multicast: fix automatic router port marking races While working on per-vlan multicast snooping I found two race conditions when multicast snooping is enabled. They're identical and happen when the router port list is modified without the multicast lock. One requires a PIM hello message to be received on a port and the other an MRD advertisement. To fix them we just need to take the multicast_lock when adding the ports to the router port list (marking them as router ports). Tested on an affected setup by generating the required packets while modifying the port list in parallel. ==================== Signed-off-by: -
Nikolay Aleksandrov authored
When an MRD advertisement is received on a bridge port with multicast snooping enabled, we mark it as a router port automatically, that includes adding that port to the router port list. The multicast lock protects that list, but it is not acquired in the MRD advertisement case leading to a race condition, we need to take it to fix the race. Cc: stable@vger.kernel.org Cc: linus.luessing@c0d3.blue Fixes: 4b3087c7 ("bridge: Snoop Multicast Router Advertisements") Signed-off-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
-
Nikolay Aleksandrov authored
When a PIM hello packet is received on a bridge port with multicast snooping enabled, we mark it as a router port automatically, that includes adding that port the router port list. The multicast lock protects that list, but it is not acquired in the PIM message case leading to a race condition, we need to take it to fix the race. Cc: stable@vger.kernel.org Fixes: 91b02d3d ("bridge: mcast: add router port on PIM hello message") Signed-off-by:
-
Marek Behún authored
It seems that we cannot differentiate 88X3310 from 88X3340 by simply looking at bit 3 of revision ID. This only works on revisions A0 and A1. On revision B0, this bit is always 1. Instead use the 3.d00d register for differentiation, since this register contains information about number of ports on the device. Fixes: 9885d016 ("net: phy: marvell10g: add separate structure for 88X3340") Signed-off-by:
Marek Behún <kabel@kernel.org> Reported-by:
Matteo Croce <mcroce@linux.microsoft.com> Tested-by:
Matteo Croce <mcroce@microsoft.com> Signed-off-by:
-
kernel test robot authored
For_each_available_child_of_node should have of_node_put() before return around line 423. Generated by: scripts/coccinelle/iterators/for_each_child.cocci CC: Alexander Lobakin <alobakin@pm.me> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Julia Lawall <julia.lawall@inria.fr> Signed-off-by:
-
- 10 Jul, 2021 8 commits
-
-
Yunjian Wang authored
As virtqueue_add_sgs() can fail, we should check the return value. Addresses-Coverity-ID: 1464439 ("Unchecked return value") Signed-off-by:Yunjian Wang <wangyunjian@huawei.com> Signed-off-by:
-
David S. Miller authored
Mat Martineau says: ==================== mptcp: Connection and accounting fixes Here are some miscellaneous fixes for MPTCP: Patch 1 modifies an MPTCP hash so it doesn't depend on one of skb->dev and skb->sk being non-NULL. Patch 2 removes an extra destructor call when rejecting a join due to port mismatch. Patches 3 and 5 more cleanly handle error conditions with MP_JOIN and syncookies, and update a related self test. Patch 4 makes sure packets that trigger a subflow TCP reset during MPTCP option header processing are correctly dropped. Patch 6 addresses a rmem accounting issue that could keep packets in subflow receive buffers longer than necessary, delaying MPTCP-level ACKs. ==================== Signed-off-by: -
Paolo Abeni authored
After commit 87952603 ("mptcp: protect the rx path with the msk socket spinlock") the rmem currently used by a given msk is really sk_rmem_alloc - rmem_released. The safety check in mptcp_data_ready() does not take the above in due account, as a result legit incoming data is kept in subflow receive queue with no reason, delaying or blocking MPTCP-level ack generation. This change addresses the issue introducing a new helper to fetch the rmem memory and using it as needed. Additionally add a MIB counter for the exceptional event described above - the peer is misbehaving. Finally, introduce the required annotation when rmem_released is updated. Fixes: 87952603 ("mptcp: protect the rx path with the msk socket spinlock") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/211Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Jianguo Wu authored
After patch "mptcp: fix syncookie process if mptcp can not_accept new subflow", if subflow is limited, MP_JOIN SYN is dropped, and no SYN/ACK will be replied. So in case "multiple subflows limited by server", the expected SYN/ACK number should be 1. Fixes: 00587187 ("selftests: mptcp: add test cases for mptcp join tests with syn cookies") Reported-by:
kernel test robot <oliver.sang@intel.com> Signed-off-by:
Jianguo Wu <wujianguo@chinatelecom.cn> Signed-off-by:
-
Jianguo Wu authored
If check_fully_established() causes a subflow reset, it should not continue to process the packet in tcp_data_queue(). Add a return value to mptcp_incoming_options(), and return false if a subflow has been reset, else return true. Then drop the packet in tcp_data_queue()/tcp_rcv_state_process() if mptcp_incoming_options() return false. Fixes: d5824847 ("mptcp: fix fallback for MP_JOIN subflows") Signed-off-by:
-
Jianguo Wu authored
Lots of "TCP: tcp_fin: Impossible, sk->sk_state=7" in client side when doing stress testing using wrk and webfsd. There are at least two cases may trigger this warning: 1.mptcp is in syncookie, and server recv MP_JOIN SYN request, in subflow_check_req(), the mptcp_can_accept_new_subflow() return false, so subflow_init_req_cookie_join_save() isn't called, i.e. not store the data present in the MP_JOIN syn request and the random nonce in hash table - join_entries[], but still send synack. When recv 3rd-ack, mptcp_token_join_cookie_init_state() will return false, and 3rd-ack is dropped, then if mptcp conn is closed by client, client will send a DATA_FIN and a MPTCP FIN, the DATA_FIN doesn't have MP_CAPABLE or MP_JOIN, so mptcp_subflow_init_cookie_req() will return 0, and pass the cookie check, MP_JOIN request is fallback to normal TCP. Server will send a TCP FIN if closed, in client side, when process TCP FIN, it will do reset, the code path is: tcp_data_queue()->mptcp_incoming_options() ->check_fully_established()->mptcp_subflow_reset(). mptcp_subflow_reset() will set sock state to TCP_CLOSE, so tcp_fin will hit TCP_CLOSE, and print the warning. 2.mptcp is in syncookie, and server recv 3rd-ack, in mptcp_subflow_init_cookie_req(), mptcp_can_accept_new_subflow() return false, and subflow_req->mp_join is not set to 1, so in subflow_syn_recv_sock() will not reset the MP_JOIN subflow, but fallback to normal TCP, and then the same thing happens when server will send a TCP FIN if closed. For case1, subflow_check_req() return -EPERM, then tcp_conn_request() will drop MP_JOIN SYN. For case2, let subflow_syn_recv_sock() call mptcp_can_accept_new_subflow(), and do fatal fallback, send reset. Fixes: 9466a1cc ("mptcp: enable JOIN requests even if cookies are in use") Signed-off-by: -
Jianguo Wu authored
In subflow_check_req(), if subflow sport is mismatch, will put msk, destroy token, and destruct req, then return -EPERM, which can be done by subflow_req_destructor() via: tcp_conn_request() |--__reqsk_free() |--subflow_req_destructor() So we should remove these redundant code, otherwise will call tcp_v4_reqsk_destructor() twice, and may double free inet_rsk(req)->ireq_opt. Fixes: 5bc56388 ("mptcp: add port number check for MP_JOIN") Signed-off-by: -
Jianguo Wu authored
I did stress test with wrk[1] and webfsd[2] with the assistance of mptcp-tools[3]: Server side: ./use_mptcp.sh webfsd -4 -R /tmp/ -p 8099 Client side: ./use_mptcp.sh wrk -c 200 -d 30 -t 4 http://192.168.174.129:8099/ and got the following warning message: [ 55.552626] TCP: request_sock_subflow: Possible SYN flooding on port 8099. Sending cookies. Check SNMP counters. [ 55.553024] ------------[ cut here ]------------ [ 55.553027] WARNING: CPU: 0 PID: 10 at net/core/flow_dissector.c:984 __skb_flow_dissect+0x280/0x1650 ... [ 55.553117] CPU: 0 PID: 10 Comm: ksoftirqd/0 Not tainted 5.12.0+ #18 [ 55.553121] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020 [ 55.553124] RIP: 0010:__skb_flow_dissect+0x280/0x1650 ... [ 55.553133] RSP: 0018:ffffb79580087770 EFLAGS: 00010246 [ 55.553137] RAX: 0000000000000000 RBX: ffffffff8ddb58e0 RCX: ffffb79580087888 [ 55.553139] RDX: ffffffff8ddb58e0 RSI: ffff8f7e4652b600 RDI: 0000000000000000 [ 55.553141] RBP: ffffb79580087858 R08: 0000000000000000 R09: 0000000000000008 [ 55.553143] R10: 000000008c622965 R11: 00000000d3313a5b R12: ffff8f7e4652b600 [ 55.553146] R13: ffff8f7e465c9062 R14: 0000000000000000 R15: ffffb79580087888 [ 55.553149] FS: 0000000000000000(0000) GS:ffff8f7f75e00000(0000) knlGS:0000000000000000 [ 55.553152] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 55.553154] CR2: 00007f73d1d19000 CR3: 0000000135e10004 CR4: 00000000003706f0 [ 55.553160] Call Trace: [ 55.553166] ? __sha256_final+0x67/0xd0 [ 55.553173] ? sha256+0x7e/0xa0 [ 55.553177] __skb_get_hash+0x57/0x210 [ 55.553182] subflow_init_req_cookie_join_save+0xac/0xc0 [ 55.553189] subflow_check_req+0x474/0x550 [ 55.553195] ? ip_route_output_key_hash+0x67/0x90 [ 55.553200] ? xfrm_lookup_route+0x1d/0xa0 [ 55.553207] subflow_v4_route_req+0x8e/0xd0 [ 55.553212] tcp_conn_request+0x31e/0xab0 [ 55.553218] ? selinux_socket_sock_rcv_skb+0x116/0x210 [ 55.553224] ? tcp_rcv_state_process+0x179/0x6d0 [ 55.553229] tcp_rcv_state_process+0x179/0x6d0 [ 55.553235] tcp_v4_do_rcv+0xaf/0x220 [ 55.553239] tcp_v4_rcv+0xce4/0xd80 [ 55.553243] ? ip_route_input_rcu+0x246/0x260 [ 55.553248] ip_protocol_deliver_rcu+0x35/0x1b0 [ 55.553253] ip_local_deliver_finish+0x44/0x50 [ 55.553258] ip_local_deliver+0x6c/0x110 [ 55.553262] ? ip_rcv_finish_core.isra.19+0x5a/0x400 [ 55.553267] ip_rcv+0xd1/0xe0 ... After debugging, I found in __skb_flow_dissect(), skb->dev and skb->sk are both NULL, then net is NULL, and trigger WARN_ON_ONCE(!net), actually net is always NULL in this code path, as skb->dev is set to NULL in tcp_v4_rcv(), and skb->sk is never set. Code snippet in __skb_flow_dissect() that trigger warning: 975 if (skb) { 976 if (!net) { 977 if (skb->dev) 978 net = dev_net(skb->dev); 979 else if (skb->sk) 980 net = sock_net(skb->sk); 981 } 982 } 983 984 WARN_ON_ONCE(!net); So, using seq and transport header derived hash. [1] https://github.com/wg/wrk [2] https://github.com/ourway/webfsd [3] https://github.com/pabeni/mptcp-tools Fixes: 9466a1cc ("mptcp: enable JOIN requests even if cookies are in use") Suggested-by:Florian Westphal <fw@strlen.de> Signed-off-by:
-
- 09 Jul, 2021 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2021-07-09 The following pull-request contains BPF updates for your *net* tree. We've added 9 non-merge commits during the last 9 day(s) which contain a total of 13 files changed, 118 insertions(+), 62 deletions(-). The main changes are: 1) Fix runqslower task->state access from BPF, from SanjayKumar Jeyakumar. 2) Fix subprog poke descriptor tracking use-after-free, from John Fastabend. 3) Fix sparse complaint from prior devmap RCU conversion, from Toke Høiland-Jørgensen. 4) Fix missing va_end in bpftool JIT json dump's error path, from Gu Shengxian. 5) Fix tools/bpf install target from missing runqslower install, from Wei Li. 6) Fix xdpsock BPF sample to unload program on shared umem option, from Wang Hai. ==================== Signed-off-by: -
Taehee Yoo authored
skb_tunnel_info() returns pointer of lwtstate->data as ip_tunnel_info type without validation. lwtstate->data can have various types such as mpls_iptunnel_encap, etc and these are not compatible. So skb_tunnel_info() should validate before returning that pointer. Splat looks like: BUG: KASAN: slab-out-of-bounds in vxlan_get_route+0x418/0x4b0 [vxlan] Read of size 2 at addr ffff888106ec2698 by task ping/811 CPU: 1 PID: 811 Comm: ping Not tainted 5.13.0+ #1195 Call Trace: dump_stack_lvl+0x56/0x7b print_address_description.constprop.8.cold.13+0x13/0x2ee ? vxlan_get_route+0x418/0x4b0 [vxlan] ? vxlan_get_route+0x418/0x4b0 [vxlan] kasan_report.cold.14+0x83/0xdf ? vxlan_get_route+0x418/0x4b0 [vxlan] vxlan_get_route+0x418/0x4b0 [vxlan] [ ... ] vxlan_xmit_one+0x148b/0x32b0 [vxlan] [ ... ] vxlan_xmit+0x25c5/0x4780 [vxlan] [ ... ] dev_hard_start_xmit+0x1ae/0x6e0 __dev_queue_xmit+0x1f39/0x31a0 [ ... ] neigh_xmit+0x2f9/0x940 mpls_xmit+0x911/0x1600 [mpls_iptunnel] lwtunnel_xmit+0x18f/0x450 ip_finish_output2+0x867/0x2040 [ ... ] Fixes: 61adedf3 ("route: move lwtunnel state to dst_entry") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Hangbin Liu authored
Commit 28e104d0 ("net: ip_tunnel: fix mtu calculation") removed dev->hard_header_len subtraction when calculate MTU for tunnel devices as there is an overhead for device that has header_ops. But there are ETHER tunnel devices, like gre_tap or erspan, which don't have header_ops but set dev->hard_header_len during setup. This makes pkts greater than (MTU - ETH_HLEN) could not be xmited. Fix it by subtracting the ETHER tunnel devices' dev->hard_header_len for MTU calculation. Fixes: 28e104d0 ("net: ip_tunnel: fix mtu calculation") Reported-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Antoine Tenart authored
Some socket buffers allocated in the fclone cache (in __alloc_skb) can end-up in the following path[1]: napi_skb_finish __kfree_skb_defer napi_skb_cache_put The issue is napi_skb_cache_put is not fclone friendly and will put those skbuff in the skb cache to be reused later, although this cache only expects skbuff allocated from skbuff_head_cache. When this happens the skbuff is eventually freed using the wrong origin cache, and we can see traces similar to: [ 1223.947534] cache_from_obj: Wrong slab cache. skbuff_head_cache but object is from skbuff_fclone_cache [ 1223.948895] WARNING: CPU: 3 PID: 0 at mm/slab.h:442 kmem_cache_free+0x251/0x3e0 [ 1223.950211] Modules linked in: [ 1223.950680] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.13.0+ #474 [ 1223.951587] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-3.fc34 04/01/2014 [ 1223.953060] RIP: 0010:kmem_cache_free+0x251/0x3e0 Leading sometimes to other memory related issues. Fix this by using __kfree_skb for fclone skbuff, similar to what is done the other place __kfree_skb_defer is called. [1] At least in setups using veth pairs and tunnels. Building a kernel with KASAN we can for example see packets allocated in sk_stream_alloc_skb hit the above path and later the issue arises when the skbuff is reused. Fixes: 9243adfc ("skbuff: queue NAPI_MERGED_FREE skbs into NAPI cache instead of freeing") Cc: Alexander Lobakin <alobakin@pm.me> Signed-off-by:Antoine Tenart <atenart@kernel.org> Signed-off-by:
-
Talal Ahmad authored
sk_wmem_schedule makes sure that sk_forward_alloc has enough bytes for charging that is going to be done by sk_mem_charge. In the transmit zerocopy path, there is sk_mem_charge but there was no call to sk_wmem_schedule. This change adds that call. Without this call to sk_wmem_schedule, sk_forward_alloc can go negetive which is a bug because sk_forward_alloc is a per-socket space that has been forward charged so this can't be negative. Fixes: f214f915 ("tcp: enable MSG_ZEROCOPY") Signed-off-by:
Talal Ahmad <talalahmad@google.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
Wei Wang <weiwan@google.com> Reviewed-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Alexander Ovechkin authored
commit e05a90ec ("net: reflect mark on tcp syn ack packets") fixed IPv4 only. This part is for the IPv6 side. Fixes: e05a90ec ("net: reflect mark on tcp syn ack packets") Signed-off-by:
Alexander Ovechkin <ovov@yandex-team.ru> Acked-by:
Dmitry Yakunin <zeil@yandex-team.ru> Reviewed-by:
-
Pavel Skripkin authored
priv is netdev private data and it cannot be used after free_netdev() call. Using priv after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. Fixes: 1e0a8b13 ("tlan: cancel work at remove path") Signed-off-by:
-
Pavel Skripkin authored
adpt is netdev private data and it cannot be used after free_netdev() call. Using adpt after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. Fixes: 54e19bc7 ("net: qcom/emac: do not use devm on internal phy pdev") Signed-off-by:
-
Pavel Skripkin authored
In case of netdev registration failure the code path will jump to init_fail label: init_fail: netdev_err(ndev, "init failed\n"); moxart_mac_free_memory(ndev); irq_map_fail: free_netdev(ndev); return ret; So, there is no need to call free_netdev() before jumping to error handling path, since it can cause UAF or double-free bug. Fixes: 6c821bd9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by:
-
John Fastabend authored
This adds some extra noise to the tailcall_bpf2bpf4 tests that will cause verify to patch insns. This then moves around subprog start/end insn index and poke descriptor insn index to ensure that verify and JIT will continue to track these correctly. If done correctly verifier should pass this program same as before and JIT should emit tail call logic. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210707223848.14580-3-john.fastabend@gmail.com
-
John Fastabend authored
Subprograms are calling map_poke_track(), but on program release there is no hook to call map_poke_untrack(). However, on program release, the aux memory (and poke descriptor table) is freed even though we still have a reference to it in the element list of the map aux data. When we run map_poke_run(), we then end up accessing free'd memory, triggering KASAN in prog_array_map_poke_run(): [...] [ 402.824689] BUG: KASAN: use-after-free in prog_array_map_poke_run+0xc2/0x34e [ 402.824698] Read of size 4 at addr ffff8881905a7940 by task hubble-fgs/4337 [ 402.824705] CPU: 1 PID: 4337 Comm: hubble-fgs Tainted: G I 5.12.0+ #399 [ 402.824715] Call Trace: [ 402.824719] dump_stack+0x93/0xc2 [ 402.824727] print_address_description.constprop.0+0x1a/0x140 [ 402.824736] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824740] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824744] kasan_report.cold+0x7c/0xd8 [ 402.824752] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824757] prog_array_map_poke_run+0xc2/0x34e [ 402.824765] bpf_fd_array_map_update_elem+0x124/0x1a0 [...] The elements concerned are walked as follows: for (i = 0; i < elem->aux->size_poke_tab; i++) { poke = &elem->aux->poke_tab[i]; [...] The access to size_poke_tab is a 4 byte read, verified by checking offsets in the KASAN dump: [ 402.825004] The buggy address belongs to the object at ffff8881905a7800 which belongs to the cache kmalloc-1k of size 1024 [ 402.825008] The buggy address is located 320 bytes inside of 1024-byte region [ffff8881905a7800, ffff8881905a7c00) The pahole output of bpf_prog_aux: struct bpf_prog_aux { [...] /* --- cacheline 5 boundary (320 bytes) --- */ u32 size_poke_tab; /* 320 4 */ [...] In general, subprograms do not necessarily manage their own data structures. For example, BTF func_info and linfo are just pointers to the main program structure. This allows reference counting and cleanup to be done on the latter which simplifies their management a bit. The aux->poke_tab struct, however, did not follow this logic. The initial proposed fix for this use-after-free bug further embedded poke data tracking into the subprogram with proper reference counting. However, Daniel and Alexei questioned why we were treating these objects special; I agree, its unnecessary. The fix here removes the per subprogram poke table allocation and map tracking and instead simply points the aux->poke_tab pointer at the main programs poke table. This way, map tracking is simplified to the main program and we do not need to manage them per subprogram. This also means, bpf_prog_free_deferred(), which unwinds the program reference counting and kfrees objects, needs to ensure that we don't try to double free the poke_tab when free'ing the subprog structures. This is easily solved by NULL'ing the poke_tab pointer. The second detail is to ensure that per subprogram JIT logic only does fixups on poke_tab[] entries it owns. To do this, we add a pointer in the poke structure to point at the subprogram value so JITs can easily check while walking the poke_tab structure if the current entry belongs to the current program. The aux pointer is stable and therefore suitable for such comparison. On the jit_subprogs() error path, we omit cleaning up the poke->aux field because these are only ever referenced from the JIT side, but on error we will never make it to the JIT, so its fine to leave them dangling. Removing these pointers would complicate the error path for no reason. However, we do need to untrack all poke descriptors from the main program as otherwise they could race with the freeing of JIT memory from the subprograms. Lastly, a748c697 ("bpf: propagate poke descriptors to subprograms") had an off-by-one on the subprogram instruction index range check as it was testing 'insn_idx >= subprog_start && insn_idx <= subprog_end'. However, subprog_end is the next subprogram's start instruction. Fixes: a748c697 ("bpf: propagate poke descriptors to subprograms") Signed-off-by: -
Florian Fainelli authored
Make sure that we disable each of the TX and RX queues in the TDMA and RDMA control registers. This is a correctness change to be symmetrical with the code that enables the TX and RX queues. Tested-by:
Maxime Ripard <maxime@cerno.tech> Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
- 08 Jul, 2021 4 commits
-
-
David S. Miller authored
Ivan Mikhaylov says: ==================== net/ncsi: Add NCSI Intel OEM command to keep PHY link up Add NCSI Intel OEM command to keep PHY link up and prevents any channel resets during the host load on i210. Also includes dummy response handler for Intel manufacturer id. Changes from v1: 1. sparse fixes about casts 2. put it after ncsi_dev_state_probe_cis instead of ncsi_dev_state_probe_channel because sometimes channel is not ready after it 3. inl -> intel ==================== Signed-off-by: -
Ivan Mikhaylov authored
Add the dummy response handler for Intel boards to prevent incorrect handling of OEM commands. Signed-off-by:
Ivan Mikhaylov <i.mikhaylov@yadro.com> Signed-off-by:
-
Ivan Mikhaylov authored
This allows to keep PHY link up and prevents any channel resets during the host load. It is KEEP_PHY_LINK_UP option(Veto bit) in i210 datasheet which block PHY reset and power state changes. Signed-off-by:
-
Ivan Mikhaylov authored
Sparse reports: net/ncsi/ncsi-rsp.c:406:24: warning: cast to restricted __be32 net/ncsi/ncsi-manage.c:732:33: warning: cast to restricted __be32 net/ncsi/ncsi-manage.c:756:25: warning: cast to restricted __be32 net/ncsi/ncsi-manage.c:779:25: warning: cast to restricted __be32 Signed-off-by:
-
