With i_extra_isize equal to or close to the available space, it was
possible for us to read past the end of the inode when trying to detect
or validate in-inode xattrs.  Fix this by checking for the needed extra
space first.

This patch shouldn't have any noticeable effect on
non-corrupted/non-malicious filesystems.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>

i_extra_isize not divisible by 4 is problematic for several reasons:

- It causes the in-inode xattr space to be misaligned, but the xattr
  header and entries are not declared __packed to express this
  possibility.  This may cause poor performance or incorrect code
  generation on some platforms.
- When validating the xattr entries we can read past the end of the
  inode if the size available for xattrs is not a multiple of 4.
- It allows the nonsensical i_extra_isize=1, which doesn't even leave
  enough room for i_extra_isize itself.

Therefore, update ext4_iget() to consider i_extra_isize not divisible by
4 to be an error, like the case where i_extra_isize is too large.

This also matches the rule recently added to e2fsck for determining
whether an inode has valid i_extra_isize.

This patch shouldn't have any noticeable effect on
non-corrupted/non-malicious filesystems, since the size of ext4_inode
has always been a multiple of 4.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>

On a CONFIG_EXT4_FS_ENCRYPTION=n kernel, the ioctls to get and set
encryption policies were disabled but EXT4_IOC_GET_ENCRYPTION_PWSALT was
not.  But there's no good reason to expose the pwsalt ioctl if the
kernel doesn't support encryption.  The pwsalt ioctl was also disabled
pre-4.8 (via ext4_sb_has_crypto() previously returning 0 when encryption
was disabled by config) and seems to have been enabled by mistake when
ext4 encryption was refactored to use fs/crypto/.  So let's disable it
again.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4_sb_has_crypto() just called through to ext4_has_feature_encrypt(),
and all callers except one were already using the latter.  So remove it
and switch its one caller to ext4_has_feature_encrypt().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

We've fixed the race condition problem in calculating ext4 checksum
value in commit b47820ed ("ext4: avoid modifying checksum fields
directly during checksum veficationon"). However, by this change,
when calculating the checksum value of inode whose i_extra_size is
less than 4, we couldn't calculate the checksum value in a proper way.
This problem was found and reported by Nix, Thank you.
Reported-by: Nix <nix@esperi.org.uk>
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Youngjin Gil <youngjin.gil@samsung.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Warn when a page is dirtied without buffers (as that will likely lead to
a crash in ext4_writepages()) or when it gets newly dirtied without the
page being locked (as there is nothing that prevents buffers to get
stripped just before calling set_page_dirty() under memory pressure).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Currently we just silently ignore flags that we don't understand (or
that cannot be manipulated) through EXT4_IOC_SETFLAGS and
EXT4_IOC_FSSETXATTR ioctls. This makes it problematic for the unused
flags to be used in future (some app may be inadvertedly setting them
and we won't notice until the flag gets used). Also this is inconsistent
with other filesystems like XFS or BTRFS which return EOPNOTSUPP when
they see a flag they cannot set.

ext4 has the additional problem that there are flags which are returned
by EXT4_IOC_GETFLAGS ioctl but which cannot be modified via
EXT4_IOC_SETFLAGS. So we have to be careful to ignore value of these
flags and not fail the ioctl when they are set (as e.g. chattr(1) passes
flags returned from EXT4_IOC_GETFLAGS to EXT4_IOC_SETFLAGS without any
masking and thus we'd break this utility).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Add EXT4_JOURNAL_DATA_FL and EXT4_EXTENTS_FL to EXT4_FL_USER_MODIFIABLE
to recognize that they are modifiable by userspace. So far we got away
without having them there because ext4_ioctl_setflags() treats them in a
special way. But it was really confusing like that.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

In ext4_put_super, we call brelse on the buffer head containing
the ext4 superblock, but then try to use it when we stop the
mmp thread, because when the thread shuts down it does:

write_mmp_block
  ext4_mmp_csum_set
    ext4_has_metadata_csum
      WARN_ON_ONCE(ext4_has_feature_metadata_csum(sb)...)

which reaches into sb->s_fs_info->s_es->s_feature_ro_compat,
which lives in the superblock buffer s_sbh which we just released.

Fix this by moving the brelse down to a point where we are no
longer using it.
Reported-by: Wang Shu <shuwang@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>

When ext4 is compiled with DAX support, it now needs the iomap code. Add
appropriate select to Kconfig.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

On a lockdep-enabled kernel, xfstests generic/027 fails due to a lockdep
warning when run on ext4 mounted with -o test_dummy_encryption:

    xfs_io/4594 is trying to acquire lock:
     (jbd2_handle
    ){++++.+}, at:
    [<ffffffff813096ef>] jbd2_log_wait_commit+0x5/0x11b

    but task is already holding lock:
     (jbd2_handle
    ){++++.+}, at:
    [<ffffffff813000de>] start_this_handle+0x354/0x3d8

The abbreviated call stack is:

 [<ffffffff813096ef>] ? jbd2_log_wait_commit+0x5/0x11b
 [<ffffffff8130972a>] jbd2_log_wait_commit+0x40/0x11b
 [<ffffffff813096ef>] ? jbd2_log_wait_commit+0x5/0x11b
 [<ffffffff8130987b>] ? __jbd2_journal_force_commit+0x76/0xa6
 [<ffffffff81309896>] __jbd2_journal_force_commit+0x91/0xa6
 [<ffffffff813098b9>] jbd2_journal_force_commit_nested+0xe/0x18
 [<ffffffff812a6049>] ext4_should_retry_alloc+0x72/0x79
 [<ffffffff812f0c1f>] ext4_xattr_set+0xef/0x11f
 [<ffffffff812cc35b>] ext4_set_context+0x3a/0x16b
 [<ffffffff81258123>] fscrypt_inherit_context+0xe3/0x103
 [<ffffffff812ab611>] __ext4_new_inode+0x12dc/0x153a
 [<ffffffff812bd371>] ext4_create+0xb7/0x161

When a file is created in an encrypted directory, ext4_set_context() is
called to set an encryption context on the new file.  This calls
ext4_xattr_set(), which contains a retry loop where the journal is
forced to commit if an ENOSPC error is encountered.

If the task actually were to wait for the journal to commit in this
case, then it would deadlock because a handle remains open from
__ext4_new_inode(), so the running transaction can't be committed yet.
Fortunately, __jbd2_journal_force_commit() avoids the deadlock by not
allowing the running transaction to be committed while the current task
has it open.  However, the above lockdep warning is still triggered.

This was a false positive which was introduced by: 1eaa566d: jbd2:
track more dependencies on transaction commit

Fix the problem by passing the handle through the 'fs_data' argument to
ext4_set_context(), then using ext4_xattr_set_handle() instead of
ext4_xattr_set().  And in the case where no journal handle is specified
and ext4_set_context() has to open one, add an ENOSPC retry loop since
in that case it is the outermost transaction.
Signed-off-by: Eric Biggers <ebiggers@google.com>

The last user of ext4_aligned_io() was the DAX path in
ext4_direct_IO_write().  This usage was removed by Jan Kara's patch
entitled "ext4: Rip out DAX handling from direct IO path".
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

No one uses functions using the get_block callback anymore. Rip them
out and update documentation.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Currently the last user of ext2_get_blocks() for DAX inodes was
dax_truncate_page(). Convert that to iomap_zero_range() so that all DAX
IO uses the iomap path.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Reads and writes for DAX inodes should no longer end up in direct IO
code. Rip out the support and add a warning.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Convert DAX faults to use iomap infrastructure. We would not have to start
transaction in ext4_dax_fault() anymore since ext4_iomap_begin takes
care of that but so far we do that to avoid lock inversion of
transaction start with DAX entry lock which gets acquired in
dax_iomap_fault() before calling ->iomap_begin handler.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Currently mapping of blocks for DAX writes happen with
EXT4_GET_BLOCKS_PRE_IO flag set. That has a result that each
ext4_map_blocks() call creates a separate written extent, although it
could be merged to the neighboring extents in the extent tree.  The
reason for using this flag is that in case the extent is unwritten, we
need to convert it to written one and zero it out. However this "convert
mapped range to written" operation is already implemented by
ext4_map_blocks() for the case of data writes into unwritten extent. So
just use flags for that mode of operation, simplify the code, and avoid
unnecessary split extents.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Implement DAX writes using the new iomap infrastructure instead of
overloading the direct IO path.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Use iomap infrastructure for zeroing blocks when in DAX mode.
ext4_iomap_begin() handles read requests just fine and that's all that
is needed for iomap_zero_range().
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Implement basic iomap_begin function that handles reading and use it for
DAX reads.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Currently we have S_DAX set inode->i_flags for a regular file whenever
ext4 is mounted with dax mount option. However in some cases we cannot
really do DAX - e.g. when inode is marked to use data journalling, when
inode data is being encrypted, or when inode is stored inline. Make sure
S_DAX flag is appropriately set/cleared in these cases.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Factor out checks of 'from' and whether we are overwriting out of
ext4_file_write_iter() so that the function is easier to follow.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

The commit "ext4: sanity check the block and cluster size at mount
time" should prevent any problems, but in case the superblock is
modified while the file system is mounted, add an extra safety check
to make sure we won't overrun the allocated buffer.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

Centralize the checks for inodes_per_block and be more strict to make
sure the inodes_per_block_group can't end up being zero.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@vger.kernel.org

Fix a large number of problems with how we handle mount options in the
superblock.  For one, if the string in the superblock is long enough
that it is not null terminated, we could run off the end of the string
and try to interpret superblocks fields as characters.  It's unlikely
this will cause a security problem, but it could result in an invalid
parse.  Also, parse_options is destructive to the string, so in some
cases if there is a comma-separated string, it would be modified in
the superblock.  (Fortunately it only happens on file systems with a
1k block size.)
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

If the block size or cluster size is insane, reject the mount.  This
is important for security reasons (although we shouldn't be just
depending on this check).

Ref: http://www.securityfocus.com/archive/1/539661
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1332506Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

The parameter "handle" isn't used.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Runs of xfstest ext4/022 on nojournal file systems result in failures
because the inodes of some of its test files do not expand as expected.
The cause is a conditional in ext4_mark_inode_dirty() that prevents inode
expansion unless the test file system has a journal.  Remove this
unnecessary restriction.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

CURRENT_TIME_SEC and CURRENT_TIME are not y2038 safe.
current_time() will be transitioned to be y2038 safe
along with vfs.

current_time() returns timestamps according to the
granularities set in the super_block.
The granularity check in ext4_current_time() to call
current_time() or CURRENT_TIME_SEC is not required.
Use current_time() directly to obtain timestamps
unconditionally, and remove ext4_current_time().

Quota files are assumed to be on the same filesystem.
Hence, use current_time() for these files as well.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>

The number of 'counters' elements needed in 'struct sg' is
super_block->s_blocksize_bits + 2. Presently we have 16 'counters'
elements in the array. This is insufficient for block sizes >= 32k. In
such cases the memcpy operation performed in ext4_mb_seq_groups_show()
would cause stack memory corruption.

Fixes: c9de560dSigned-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org

'border' variable is set to a value of 2 times the block size of the
underlying filesystem. With 64k block size, the resulting value won't
fit into a 16-bit variable. Hence this commit changes the data type of
'border' to 'unsigned int'.

Fixes: c9de560dSigned-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@vger.kernel.org

If there is an error reported in mballoc via ext4_grp_locked_error(),
the code is holding a spinlock, so ext4_commit_super() must not try to
lock the buffer head, or else it will trigger a BUG:

  BUG: sleeping function called from invalid context at ./include/linux/buffer_head.h:358
  in_atomic(): 1, irqs_disabled(): 0, pid: 993, name: mount
  CPU: 0 PID: 993 Comm: mount Not tainted 4.9.0-rc1-clouder1 #62
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
   ffff880006423548 ffffffff81318c89 ffffffff819ecdd0 0000000000000166
   ffff880006423558 ffffffff810810b0 ffff880006423580 ffffffff81081153
   ffff880006e5a1a0 ffff88000690e400 0000000000000000 ffff8800064235c0
  Call Trace:
    [<ffffffff81318c89>] dump_stack+0x67/0x9e
    [<ffffffff810810b0>] ___might_sleep+0xf0/0x140
    [<ffffffff81081153>] __might_sleep+0x53/0xb0
    [<ffffffff8126c1dc>] ext4_commit_super+0x19c/0x290
    [<ffffffff8126e61a>] __ext4_grp_locked_error+0x14a/0x230
    [<ffffffff81081153>] ? __might_sleep+0x53/0xb0
    [<ffffffff812822be>] ext4_mb_generate_buddy+0x1de/0x320

Since ext4_grp_locked_error() calls ext4_commit_super with sync == 0
(and it is the only caller which does so), avoid locking and unlocking
the buffer in this case.

This can result in races with ext4_commit_super() if there are other
problems (which is what commit 4743f839 was trying to address),
but a Warning is better than BUG.

Fixes: 4743f839
Cc: stable@vger.kernel.org # 4.9
Reported-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>

Return errors to the caller instead of declaring the file system
corrupted.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>

This allows us to properly propagate errors back up to
ext4_truncate()'s callers.  This also means we no longer have to
silently ignore some errors (e.g., when trying to add the inode to the
orphan inode list).
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>

With the new (in 4.9) option to use a virtually-mapped stack
(CONFIG_VMAP_STACK), stack buffers cannot be used as input/output for
the scatterlist crypto API because they may not be directly mappable to
struct page.  get_crypt_info() was using a stack buffer to hold the
output from the encryption operation used to derive the per-file key.
Fix it by using a heap buffer.

This bug could most easily be observed in a CONFIG_DEBUG_SG kernel
because this allowed the BUG in sg_set_buf() to be triggered.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

With the new (in 4.9) option to use a virtually-mapped stack
(CONFIG_VMAP_STACK), stack buffers cannot be used as input/output for
the scatterlist crypto API because they may not be directly mappable to
struct page.  For short filenames, fname_encrypt() was encrypting a
stack buffer holding the padded filename.  Fix it by encrypting the
filename in-place in the output buffer, thereby making the temporary
buffer unnecessary.

This bug could most easily be observed in a CONFIG_DEBUG_SG kernel
because this allowed the BUG in sg_set_buf() to be triggered.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Avoid re-use of page index as tweak for AES-XTS when multiple parts of
same page are encrypted. This will happen on multiple (partial) calls of
fscrypt_encrypt_page on same page.
page->index is only valid for writeback pages.
Signed-off-by: David Gstir <david@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Some filesystems, such as UBIFS, maintain a const pointer for struct
inode.
Signed-off-by: David Gstir <david@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>