Sync atstk1002_defconfig with latest git, turn off non-existent
drivers and enable a few more userspace-visible options like
SysV IPC and inotify support.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The read[bwl] and write[bwl] functions are meant for accessing PCI
devices. How this is achieved on AVR32 is unknown, as there are no
systems with a PCI bridge available yet.

On-chip peripheral access, however, should not depend on how we end
up implementing PCI access, so using __raw_read[bwl]/__raw_write[bwl]
is the right thing to do for on-chip peripherals. This patch converts
the drivers for the static memory controller, interrupt controller,
PIO controller and system manager to use __raw MMIO access.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Implement __raw_readsb and __raw_writesb. Export __raw_reads[bwl]
and __raw_writes[bwl] for use by modules.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

A number of new drivers require io{read,write}{8,16,32}{be,} family of io
operations.  These are provided for the AVR32 by this patch in the form of
a series of macros.

Access to the (memory mapped) io space through these macros is defined to
be little endian only as little endian devices (such as PCI) are the main
consumer of IO access.  If high speed access is required,
io{read,write}{16,32}be macros are supplied to perform native big endian
access to this io space.
Signed-off-by: Ben Nizette <ben@mallochdigital.com>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

When calling e.g. atomic_sub_return with a large constant, the
compiler may output an immediate that is too large for the sub
instruction in the middle of the loop.

Fix this by explicitly specifying the number of bits allowed in the
constraint. Also stop atomic_add_return() and friends from falling
back to their respective "sub" variants if the constant is too large
to fit in an immediate.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

While ioremap() will happily map a physical address through the
P2 (uncached) segment when appropriate, iounmap() doesn't know how
to handle those mappings.

This patch makes iounmap() do the right thing, i.e. nothing, for
such mappings.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Silence a few compile warnings which are basically harmless, but
easy to fix.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Don't generate listing by default, remove unused LIBGCC variable and
rename generated disassembly and listing files to vmlinux.{s,lst}.

Also make sure that files generated during the build are actually
removed with make clean.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (40 commits)
  [SCSI] aic79xx: Print out signalling
  [SCSI] aic7xxx: Remove slave_destroy
  [SCSI] aic79xx: set precompensation
  [SCSI] aic79xx: Fixup external device reset
  [SCSI] replace u8 and u32 with __u8 and __u32 in scsi.h for user space
  [SCSI] lpfc: fix printk format warning
  [SCSI] aic79xx: make ahd_set_tags() static
  [SCSI] aic7xxx: cleanups
  [SCSI] drivers/scsi: Handcrafted MIN/MAX macro removal
  [SCSI] scsi_debug: support REPORT TARGET PORT GROUPS
  [SCSI] qla1280 bus reset typo
  [SCSI] libiscsi: fix logout pdu processing
  [SCSI] libiscsi: fix aen support
  [SCSI] libiscsi: fix missed iscsi_task_put in xmit error path
  [SCSI] libiscsi: fix oops in connection create failure path
  [SCSI] iscsi class: fix slab corruption during restart
  [SCSI] Switch fdomain to the pci_get API
  [SCSI] add can_queue to host parameters
  [SCSI] megaraid_{mm,mbox}: 64-bit DMA capability fix
  [SCSI] aic94xx: Supermicro motherboards support
  ...

* 'intelfb-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/intelfb-2.6:
  Remove unnecessary check in drivers/video/intelfb/intelfbhw.c
  intel fb: switch to pci_get API

* 'drm-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: ioremap balanced with iounmap for drivers/char/drm
  drm: fix error returns, sysfs error handling
  fix return code in error case.
  drm: mga: set dev_priv_size
  drm: savage: dev->agp_buffer_map is not initialized for AGP DMA on savages
  drm: radeon: only allow specific type-3 packetss through verifier

* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6:
  [PATCH] x86-64: Only look at per_cpu data for online cpus.
  [PATCH] x86-64: Simplify the vector allocator.

* master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] users: Select ECB/CBC where needed

* 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Make sure __cpu_preinit_ppc970 gets called on 970GX processors
  [POWERPC] Fix CHRP platforms with only 8259
  [POWERPC] IPIC: Fix spinlock recursion in set_irq_handler
  [POWERPC] Fix the UCC rx/tx clock of QE
  [POWERPC] cell: update defconfig
  [POWERPC] spufs: fix another off-by-one bug in spufs_mbox_read
  [POWERPC] spufs: fix signal2 file to report signal2
  [POWERPC] Fix device_is_compatible() const warning
  [POWERPC] Cell timebase bug workaround
  [POWERPC] Support feature fixups in modules
  [POWERPC] Support feature fixups in vdso's
  [POWERPC] Support nested cpu feature sections
  [POWERPC] Consolidate feature fixup code
  [POWERPC] Fix hang in start_ldr if _end or _edata is unaligned
  [POWERPC] Fix spelling errors in ucc_fast.c and ucc_slow.c
  [POWERPC] Don't require execute perms on wrapper when building zImage.initrd
  [POWERPC] Add 970GX cputable entry
  [POWERPC] Fix build breakage with CONFIG_PPC32
  [POWERPC] Fix compiler warning message on get_property call
  [POWERPC] Simplify stolen time calculation

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3902/1: Enable GPIO81-84 on PXA255
  [ARM] Comment out missing configuration symbols
  [ARM] 3898/1: corgi_bl fix module loading
  [ARM] 3897/1: corgi_bl fix module compiling
  [ARM] Fix breakage in 7281c248

Add check for 970GX for __cpu_preinit_ppc970.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This is a cross-port of a similar patch for aic7xxx;
only it's a bit simpler here as we don't support HVD
and all controller actually implement this register.
I hope.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

This is a cross-port from aic79xx; we still hit the occasional
BUG_ON in slave_destroy. And again we don't really need the
slave_destroy callback nor the ahc_linux_target structure
at all.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

aic79xx has a special 'iocell' chip which handles the precompensation.
If it's set via DV we should make sure to set the chip correctly, too.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Whenever an external device is resetted we really have to take
care to keep the channel in sync. Just notifying SCSI-ML and retry
is not enough as we have to make sure the SCSI bus is not getting
confused, either.
So whenever we detect an external reset we rewrite the command to
TUR, disable packetized command and notify the internal engine
that an abort has happened. This way we trigger a proper bus
reset sequence and all devices will be renegotiated properly.
Kudos to Justin Gibbs and Luben Tuikov for this idea.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Fix printk format warning:
drivers/scsi/lpfc/lpfc_attr.c:597: warning: long long unsigned int format, uint64_t arg (arg 4)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: James Smart <James.Smart@Emulex.Com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

- make needlessly global code static

- #if 0 the following unused global functions:
  - aic79xx_core.c: ahd_print_scb
  - aic79xx_core.c: ahd_suspend
  - aic79xx_core.c: ahd_resume
  - aic79xx_core.c: ahd_dump_scbs
  - aic79xx_osm.c: ahd_softc_comp
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Cleanups done to use min/max macros from kernel.h.  Handcrafted MIN/MAX
macros are changed to use macros in kernel.h

[akpm@osdl.org: fix warning]
Signed-off-by: Amol Lad <amol@verismonetworks.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

This patch adds support for REPORT TARGET PORT GROUPS. This is used
eg for the multipathing priority callout to determine the path
priority.
With this patch multipath-tools can use the existing mpath_prio_alua
callout to exercise the path priority grouping.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Fix typo in check of return value of qla1280_bus_reset() which would
result in an adapter reset in addition to the bus reset.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

According to the iscsi RFC, we cannot send other requests if
we have sent a logout pdu. This patch enforces this requirement
by blocking the session and suspending the send thread. Userspace
decides if we restart the connection or if we just free everything.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

We have been dropping the pdu. We should just send it to userspace
and let it handle it.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

from bhalevy@gmail.com:

It looks like change 652 to libiscsi.c added some dead code around line
670
                if (rc) {
                        spin_unlock_bh(&conn->session->lock);
                        goto again;
                }

since 5 lines above we goto again if (rc).

It looks like the previous if (rc) should go away if we want to put the
ctask before
breaking out of the while loop with "goto again" (see following patch).
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

If connection creation fails we end up calling list_del
on a invalid struct. This then causes an oops. We are not
acutally using the lists (old MCS code we thought might
be useful elsewhere) so this patch just removes that
code.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

The transport class recv mempools are causing slab corruption.
We could hack around netlink's lack of mempool support like dm,
but it is just too ulgy (dm's hack is ugly enough :) when you need
to support broadcast.

This patch removes the recv pools. We have not used them even when
we were allocting 20 MB per session and the system only had 64 MBs.
And we have no pools on the send side and have been ok there. When
Peter's work gets merged we can use that since the network guys
are in favor of that approach and are not going to add mempools
everywhere.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Doesn't make the hardware hot pluggable but does ensure the driver won't
crash when another device is hot-unplugged at the wrong moment. Soon I
propose to deprecate pci_find_device() and some of its friends.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Debugging TCQ issues has shown me this is a very useful parameter to be
able to view.  Add it to he host class parameters.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

It is known that 2 LSI Logic MegaRAID SATA RAID Controllers (150-4 and
150-6) don't support 64-bit DMA. Unfortunately currently this check is
wrong and driver sets 64-bit DMA mode for these devices.
Signed-off-by: Andrey Mirkin <amirkin@sw.ru>
Acked-by: "Ju, Seokmann" <Seokmann.Ju@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Add PCI id. Plus correct for possibly missing resistor that can cause
FLASHEX to have the wrong value.
Signed-off-by: Sergey Kononenko <sergk@sergk.org.ua>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

The "ibmvscsi: treat busy and error conditions separately" patch
submitted by Dave Boutcher back in June incorrectly reenables the CRQ.
The broken logic causes the adapter to get disabled if the CRQ
connection happens to close temporarily.  This patch "fixes that
obviously wrong logic check" (Dave's words).
Signed-off-by: Santiago Leon <santil@us.ibm.com>
Signed-off-by: David Boutcher <sleddog@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

- Drop queue-depths across all luns for a given fcport
  during TASK_SET_FULL statuses.
- Ramp-up I/Os after throttling.
- Consolidate completion-status handling of CS_QUEUE_FULL with
  CS_COMPLETE as ISP24xx firmware no longer reports
  CS_QUEUE_FULL.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Early ISP2432 parts have a known hardware issue when coming
out of a D3 hot state.  This issue can result in a hung PCIe
link.  Recent firmwares contain a workaround whereby the
stop-firmware mailbox command prevents the ISP from entering
the D3 hot state.

In order to ensure that the workaround succeeded the driver
must verify that the stop-firmware mailbox command completes
successfully.  In the event of a failure, the driver
attempts a shutdown-retry after resetting the ISP and
re-executing firmware.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>