- 26 Jan, 2017 26 commits
-
-
Sriharsha Basavapatna authored
commit ce1ca7d2 upstream. In rdma_read_chunk_frmr() when ib_post_send() fails, the error code path invokes ib_dma_unmap_sg() to unmap the sg list. It then invokes svc_rdma_put_frmr() which in turn tries to unmap the same sg list through ib_dma_unmap_sg() again. This second unmap is invalid and could lead to problems when the iova being unmapped is subsequently reused. Remove the call to unmap in rdma_read_chunk_frmr() and let svc_rdma_put_frmr() handle it. Fixes: 412a15c0 ("svcrdma: Port to new memory registration API") Signed-off-by:
Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Reviewed-by:
Chuck Lever <chuck.lever@oracle.com> Reviewed-by:
Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Joonyoung Shim authored
commit bc7c36ee upstream. When a CPU goes offline a potentially pending timer interrupt is not cleared. When the CPU comes online again then the pending interrupt is delivered before the per cpu clockevent device is initialized. As a consequence the tick interrupt handler dereferences a NULL pointer. [ 51.251378] Unable to handle kernel NULL pointer dereference at virtual address 00000040 [ 51.289348] task: ee942d00 task.stack: ee960000 [ 51.293861] PC is at tick_periodic+0x38/0xb0 [ 51.298102] LR is at tick_handle_periodic+0x1c/0x90 Clear the pending interrupt in the cpu dying path. Fixes: 56a94f13 ("clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier") Reported-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Cc: cw00.choi@samsung.com Cc: daniel.lezcano@linaro.org Cc: javier@osg.samsung.com Cc: kgene@kernel.org Cc: krzk@kernel.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1484628876-22065-1-git-send-email-jy0922.shim@samsung.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Richard Weinberger authored
commit 1cb51a15 upstream. When replaying the journal it can happen that a journal entry points to a garbage collected node. This is the case when a power-cut occurred between a garbage collect run and a commit. In such a case nodes have to be read using the failable read functions to detect whether the found node matches what we expect. One corner case was forgotten, when the journal contains an entry to remove an inode all xattrs have to be removed too. UBIFS models xattr like directory entries, so the TNC code iterates over all xattrs of the inode and removes them too. This code re-uses the functions for walking directories and calls ubifs_tnc_next_ent(). ubifs_tnc_next_ent() expects to be used only after the journal and aborts when a node does not match the expected result. This behavior can render an UBIFS volume unmountable after a power-cut when xattrs are used. Fix this issue by using failable read functions in ubifs_tnc_next_ent() too when replaying the journal. Fixes: 1e51764a ("UBIFS: add new flash file system") Reported-by:
Rock Lee <rockdotlee@gmail.com> Reviewed-by:
David Gstir <david@sigma-star.at> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Quinn Tran authored
commit fc1ffd6c upstream. During code inspection, while investigating following stack trace seen on one of the test setup, we found out there was possibility of memory leak becuase driver was not unwinding the stack properly. This issue has not been reproduced in a test environment or on a customer setup. Here's stack trace that was seen. [1469877.797315] Call Trace: [1469877.799940] [<ffffffffa03ab6e9>] qla2x00_mem_alloc+0xb09/0x10c0 [qla2xxx] [1469877.806980] [<ffffffffa03ac50a>] qla2x00_probe_one+0x86a/0x1b50 [qla2xxx] [1469877.814013] [<ffffffff813b6d01>] ? __pm_runtime_resume+0x51/0xa0 [1469877.820265] [<ffffffff8157c1f5>] ? _raw_spin_lock_irqsave+0x25/0x90 [1469877.826776] [<ffffffff8157cd2d>] ? _raw_spin_unlock_irqrestore+0x6d/0x80 [1469877.833720] [<ffffffff810741d1>] ? preempt_count_sub+0xb1/0x100 [1469877.839885] [<ffffffff8157cd0c>] ? _raw_spin_unlock_irqrestore+0x4c/0x80 [1469877.846830] [<ffffffff81319b9c>] local_pci_probe+0x4c/0xb0 [1469877.852562] [<ffffffff810741d1>] ? preempt_count_sub+0xb1/0x100 [1469877.858727] [<ffffffff81319c89>] pci_call_probe+0x89/0xb0 Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> [ bvanassche: Fixed spelling in patch description ] Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
-
Ruslan Ruslichenko authored
commit 020eb3da upstream. commit d32932d0 removed the irq_retrigger callback from the IO-APIC chip and did not add it to the new IO-APIC-IR irq chip. Unfortunately the software resend fallback is not enabled on X86, so edge interrupts which are received during the lazy disabled state of the interrupt line are not retriggered and therefor lost. Restore the callbacks. [ tglx: Massaged changelog ] Fixes: d32932d0 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") Signed-off-by:
Ruslan Ruslichenko <rruslich@cisco.com> Cc: xe-linux-external@cisco.com Link: http://lkml.kernel.org/r/1484662432-13580-1-git-send-email-rruslich@cisco.comSigned-off-by:
-
Hauke Mehrtens authored
commit 73529c87 upstream. The xway_nand driver accesses the ltq_ebu_membase symbol which is not exported. This also should not get exported and we should handle the EBU interface in a better way later. This quick fix just deactivated support for building as module. Fixes: 99f2b107 ("mtd: lantiq: Add NAND support on Lantiq XWAY SoC.") Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Stefan Schmidt authored
commit 05a974ef upstream. From 4.9 we should really avoid using the stack here as this will not be DMA able on various platforms. This changes the buffers already being present in time of 4.9 being released. This should go into stable as well. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Stefan Wahren authored
commit 01167c7b upstream. According to the code the intention is to append 8 SCK cycles instead of 4 at end of a MMC_STOP_TRANSMISSION command. But this will never happened because it's an AC command not an ADTC command. So fix this by moving the statement into the right function. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Fixes: e4243f13 (mmc: mxs-mmc: add mmc host driver for i.MX23/28) Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Johan Hovold authored
commit 7a546af5 upstream. Make sure to check for short control transfers in order to avoid parsing uninitialised buffer data and leaking it to user space. Note that the backlight and macro-mode buffer constraints are kept as loose as possible in order to avoid any regressions should the current buffer sizes be larger than necessary. Fixes: 6f78193e ("HID: corsair: Add Corsair Vengeance K90 driver") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Johan Hovold authored
commit 6d104af3 upstream. Not all platforms support DMA to the stack, and specifically since v4.9 this is no longer supported on x86 with VMAP_STACK either. Note that the macro-mode buffer was larger than necessary. Fixes: 6f78193e ("HID: corsair: Add Corsair Vengeance K90 driver") Signed-off-by:
-
Bjorn Helgaas authored
commit 51ebfc92 upstream. A PCI-to-PCIe bridge (a "reverse bridge") has a PCI or PCI-X primary interface and a PCI Express secondary interface. The PCIe interface is a Downstream Port that originates a Link. See the "PCI Express to PCI/PCI-X Bridge Specification", rev 1.0, sections 1.2 and A.6. The bug report below involves a PCI-to-PCIe bridge and a PCIe switch below the bridge: 00:1e.0 Intel 82801 PCI Bridge to [bus 01-0a] 01:00.0 Pericom PI7C9X111SL PCIe-to-PCI Reversible Bridge to [bus 02-0a] 02:00.0 Pericom Device 8608 [PCIe Upstream Port] to [bus 03-0a] 03:01.0 Pericom Device 8608 [PCIe Downstream Port] to [bus 0a] 01:00.0 is configured as a PCI-to-PCIe bridge (despite the name printed by lspci). As we traverse a PCIe hierarchy, device connections alternate between PCIe Links and internal Switch logic. Previously we did not recognize that 01:00.0 had a secondary link, so we thought the 02:00.0 Upstream Port *did* have a secondary link. In fact, it's the other way around: 01:00.0 has a secondary link, and 02:00.0 has internal Switch logic on its secondary side. When we thought 02:00.0 had a secondary link, the pci_scan_slot() -> only_one_child() path assumed 02:00.0 could have only one child, so 03:00.0 was the only possible downstream device. But 03:00.0 doesn't exist, so we didn't look for any other devices on bus 03. Booting with "pci=pcie_scan_all" is a workaround, but we don't want users to have to do that. Recognize that PCI-to-PCIe bridges originate links on their secondary interfaces. Link: https://bugzilla.kernel.org/show_bug.cgi?id=189361 Fixes: d0751b98 ("PCI: Add dev->has_secondary_link to track downstream PCIe links") Tested-by:
Blake Moore <blake.moore@men.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Tahsin Erdogan authored
commit a8a86d78 upstream. fuse_abort_conn() moves requests from pending list to a temporary list before canceling them. This operation races with request_wait_answer() which also tries to remove the request after it gets a fatal signal. It checks FR_PENDING flag to determine whether the request is still in the pending list. Make fuse_abort_conn() clear FR_PENDING flag so that request_wait_answer() does not remove the request from temporary list. This bug causes an Oops when trying to delete an already deleted list entry in end_requests(). Fixes: ee314a87 ("fuse: abort: no fc->lock needed for request ending") Signed-off-by:
Tahsin Erdogan <tahsin@google.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
J. Bruce Fields authored
commit 78794d18 upstream. Context expiry times are in units of seconds since boot, not unix time. The use of get_seconds() here therefore sets the expiry time decades in the future. This prevents timely freeing of contexts destroyed by client RPC_GSS_PROC_DESTROY requests. We'd still free them eventually (when the module is unloaded or the container shut down), but a lot of contexts could pile up before then. Fixes: c5b29f88 "sunrpc: use seconds since boot in expiry cache" Reported-by:
Andy Adamson <andros@netapp.com> Signed-off-by:
-
Bjorn Helgaas authored
commit 89e9f7bc upstream. Martin reported that the Supermicro X8DTH-i/6/iF/6F advertises incorrect host bridge windows via _CRS: pci_root PNP0A08:00: host bridge window [io 0xf000-0xffff] pci_root PNP0A08:01: host bridge window [io 0xf000-0xffff] Both bridges advertise the 0xf000-0xffff window, which cannot be correct. Work around this by ignoring _CRS on this system. The downside is that we may not assign resources correctly to hot-added PCI devices (if they are possible on this system). Link: https://bugzilla.kernel.org/show_bug.cgi?id=42606Reported-by:
Martin Burnicki <martin.burnicki@meinberg.de> Signed-off-by:
-
Gu Zheng authored
commit 497de07d upstream. This change was missed the tmpfs modification in In CVE-2016-7097 commit 07393101 ("posix_acl: Clear SGID bit when setting file permissions") It can test by xfstest generic/375, which failed to clear setgid bit in the following test case on tmpfs: touch $testfile chown 100:100 $testfile chmod 2755 $testfile _runas -u 100 -g 101 -- setfacl -m u::rwx,g::rwx,o::rwx $testfile Signed-off-by:
Gu Zheng <guzheng1@huawei.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by:
-
Vladimir Zapolskiy authored
commit af92305e upstream. On i.MX31 AVIC interrupt controller base address is at 0x68000000. The problem was shadowed by the AVIC driver, which takes the correct base address from a SoC specific header file. Fixes: d2a37b3d ("ARM i.MX31: Add devicetree support") Signed-off-by:
Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Vladimir Zapolskiy authored
commit 1f87aee6 upstream. i.MX31 Clock Control Module controller is found on AIPS2 bus, move it there from SPBA bus to avoid a conflict of device IO space mismatch. Fixes: ef0e4a60 ("ARM: mx31: Replace clk_register_clkdev with clock DT lookup") Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Vladimir Zapolskiy authored
commit 2e575cbc upstream. The type of AVIC interrupt controller found on i.MX31 is one-cell, namely 31 for CCM DVFS and 53 for CCM, however for clock control module its interrupts are specified as 3-cells, fix it. Fixes: ef0e4a60 ("ARM: mx31: Replace clk_register_clkdev with clock DT lookup") Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit cf346d5b upstream. Both register_perl_scripting() and register_python_scripting() allocate this variable, fix it by checking if it already was. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 7e4b21b8 ("perf/scripts: Add Python scripting engine") Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Kamal Heib authored
commit 0b59970e upstream. Remove the warning print of "can't use of GFP_NOIO" to avoid prints in each QP creation when devices aren't supporting IB_QP_CREATE_USE_GFP_NOIO. This print become more annoying when the IPoIB interface is configured to work in connected mode. Fixes: 09b93088 ('IB: Add a QP creation flag to use GFP_NOIO allocations') Signed-off-by:
Kamal Heib <kamalh@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Reviewed-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Eran Ben Elisha authored
commit 1f22e454 upstream. According to the firmware spec, FLOW_STEERING_IB_UC_QP_RANGE command is supported only if dmfs_ipoib bit is set. If it isn't set we want to ensure allocating NET_IF QPs fail. We do so by filling out the allocation bitmap. By thus, the NET_IF QPs allocating function won't find any free QP and will fail. Fixes: c1c98501 ('IB/mlx4: Add support for steerable IB UD QPs') Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Daniel Jurgens <danielj@mellanox.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
-
Saeed Mahameed authored
commit 6fa26208 upstream. Report the correct speed in the port attributes when using a 56Gbps ethernet link. Without this change the field is incorrectly set to 10. Fixes: a9c766bb ('IB/mlx4: Fix info returned when querying IBoE ports') Fixes: 2e96691c ('IB: Use central enum for speed instead of hard-coded values') Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
commit c482af64 upstream. For non-special QPs, the port value becomes non-zero only at the RESET-to-INIT transition. If the QP has not undergone that transition, its port number value is still zero. If such a QP is destroyed before being moved out of the RESET state, subtracting one from the qp port number results in a negative value. Using that negative value as an index into the qp1_proxy array results in an out-of-bounds array reference. Fix this by testing that the QP type is one that uses qp1_proxy before using the port number. For special QPs of all types, the port number is specified at QP creation time. Fixes: 9433c188 ("IB/mlx4: Invoke UPDATE_QP for proxy QP1 on MAC changes") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Maor Gottlieb authored
commit af4295c1 upstream. Set traffic class within sl_tclass_flowlabel when create iboe AH. Without this the TOS value will be empty when running VLAN tagged traffic, because the TOS value is taken from the traffic class in the address handle attributes. Fixes: 9106c410 ('IB/mlx4: Fix SL to 802.1Q priority-bits mapping for IBoE') Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
-
Eli Cohen authored
commit acbda523 upstream. Wait before continuing unload till all pending mkey async creation requests are done. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
-
Steven Rostedt authored
commit 8329e818 upstream. Matt Fleming reported seeing crashes when enabling and disabling function profiling which uses function graph tracer. Later Namhyung Kim hit a similar issue and he found that the issue was due to the jmp to ftrace_stub in ftrace_graph_call was only two bytes, and when it was changed to jump to the tracing code, it overwrote the ftrace_stub that was after it. Masami Hiramatsu bisected this down to a binutils change: 8dcea93252a9ea7dff57e85220a719e2a5e8ab41 is the first bad commit commit 8dcea93252a9ea7dff57e85220a719e2a5e8ab41 Author: H.J. Lu <hjl.tools@gmail.com> Date: Fri May 15 03:17:31 2015 -0700 Add -mshared option to x86 ELF assembler This patch adds -mshared option to x86 ELF assembler. By default, assembler will optimize out non-PLT relocations against defined non-weak global branch targets with default visibility. The -mshared option tells the assembler to generate code which may go into a shared library where all non-weak global branch targets with default visibility can be preempted. The resulting code is slightly bigger. This option only affects the handling of branch instructions. Declaring ftrace_stub as a weak call prevents gas from using two byte jumps to it, which would be converted to a jump to the function graph code. Link: http://lkml.kernel.org/r/20160516230035.1dbae571@gandalf.local.homeReported-by:
Matt Fleming <matt@codeblueprint.co.uk> Reported-by:
Namhyung Kim <namhyung@kernel.org> Tested-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
- 20 Jan, 2017 1 commit
-
-
Greg Kroah-Hartman authored
-
- 19 Jan, 2017 13 commits
-
-
Niklas Söderlund authored
commit 5d7400c4 upstream. Always stating PIN_CONFIG_BIAS_DISABLE is supported gives untrue output when examining /sys/kernel/debug/pinctrl/e6060000.pfc/pinconf-pins if the operation get_bias() is implemented but the pin is not handled by the get_bias() implementation. In that case the output will state that "input bias disabled" indicating that this pin has bias control support. Make support for PIN_CONFIG_BIAS_DISABLE depend on that the pin either supports SH_PFC_PIN_CFG_PULL_UP or SH_PFC_PIN_CFG_PULL_DOWN. This also solves the issue where SoC specific implementations print error messages if their particular implementation of {set,get}_bias() is called with a pin it does not know about. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Johan Hovold authored
commit fe0f3168 upstream. Make sure to drop any reference taken by bus_find_device() in the sysfs callbacks that are used to create and destroy devices based on device-tree entries. Fixes: 6bccf755 ("[POWERPC] ibmebus: dynamic addition/removal of adapters, some code cleanup") Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Johan Hovold authored
commit 815a7141 upstream. Make sure to drop any reference taken by bus_find_device() when creating devices during init and driver registration. Fixes: 55347cc9 ("[POWERPC] ibmebus: Add device creation and bus probing based on of_device") Signed-off-by:
-
Johan Hovold authored
commit c090959b upstream. Make sure to drop the reference to the parent device taken by class_find_device() after populating the bus. Fixes: 3b9334ac ("mfd: vexpress: Convert custom func API to regmap") Acked-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Gabriel Krisman Bertazi authored
commit c02ebfdd upstream. Commit 0e87e58b ("blk-mq: improve warning for running a queue on the wrong CPU") attempts to avoid triggering the WARN_ON in __blk_mq_run_hw_queue when the expected CPU is dead. Problem is, in the last batch execution before round robin, blk_mq_hctx_next_cpu can schedule a dead CPU and also update next_cpu to the next alive CPU in the mask, which will trigger the WARN_ON despite the previous workaround. The following patch fixes this scenario by always scheduling the value in hctx->next_cpu. This changes the moment when we round-robin the CPU running the hctx, but it really doesn't matter, since it still executes BLK_MQ_CPU_WORK_BATCH times in a row before switching to another CPU. Fixes: 0e87e58b ("blk-mq: improve warning for running a queue on the wrong CPU") Signed-off-by:
Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Prarit Bhargava authored
commit a545715d upstream. When removing and adding cpu 0 on a system with GHES NMI the following stack trace is seen when re-adding the cpu: WARNING: CPU: 0 PID: 0 at arch/x86/kernel/apic/apic.c:1349 setup_local_APIC+ Modules linked in: nfsv3 rpcsec_gss_krb5 nfsv4 nfs fscache coretemp intel_ra CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.0-rc6+ #2 Call Trace: dump_stack+0x63/0x8e __warn+0xd1/0xf0 warn_slowpath_null+0x1d/0x20 setup_local_APIC+0x275/0x370 apic_ap_setup+0xe/0x20 start_secondary+0x48/0x180 set_init_arg+0x55/0x55 early_idt_handler_array+0x120/0x120 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0x13d/0x14c During the cpu bringup, wakeup_cpu_via_init_nmi() is called and issues an NMI on CPU 0. The GHES NMI handler, ghes_notify_nmi() runs the ghes_proc_irq_work work queue which ends up setting IRQ_WORK_VECTOR (0xf6). The "faulty" IR line set at arch/x86/kernel/apic/apic.c:1349 is also 0xf6 (specifically APIC IRR for irqs 255 to 224 is 0x400000) which confirms that something has set the IRQ_WORK_VECTOR line prior to the APIC being initialized. Commit 2383844d ("GHES: Elliminate double-loop in the NMI handler") incorrectly modified the behavior such that the handler returns NMI_HANDLED only if an error was processed, and incorrectly runs the ghes work queue for every NMI. This patch modifies the ghes_proc_irq_work() to run as it did prior to 2383844d ("GHES: Elliminate double-loop in the NMI handler") by properly returning NMI_HANDLED and only calling the work queue if NMI_HANDLED has been set. Fixes: 2383844d (GHES: Elliminate double-loop in the NMI handler) Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Reviewed-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Tejun Heo authored
commit ebc4ff66 upstream. cfq_cpd_alloc() which is the cpd_alloc_fn implementation for cfq was incorrectly hard coding GFP_KERNEL instead of using the mask specified through the @gfp parameter. This currently doesn't cause any actual issues because all current callers specify GFP_KERNEL. Fix it. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
-
Denis Kirjanov authored
commit 8a10c06a upstream. With preemption turned on we can read incorrect throttling state while being switched to CPU on a different chip. BUG: using smp_processor_id() in preemptible [00000000] code: cat/7343 caller is .powernv_cpufreq_throttle_check+0x2c/0x710 CPU: 13 PID: 7343 Comm: cat Not tainted 4.8.0-rc5-dirty #1 Call Trace: [c0000007d25b75b0] [c000000000971378] .dump_stack+0xe4/0x150 (unreliable) [c0000007d25b7640] [c0000000005162e4] .check_preemption_disabled+0x134/0x150 [c0000007d25b76e0] [c0000000007b63ac] .powernv_cpufreq_throttle_check+0x2c/0x710 [c0000007d25b7790] [c0000000007b6d18] .powernv_cpufreq_target_index+0x288/0x360 [c0000007d25b7870] [c0000000007acee4] .__cpufreq_driver_target+0x394/0x8c0 [c0000007d25b7920] [c0000000007b22ac] .cpufreq_set+0x7c/0xd0 [c0000007d25b79b0] [c0000000007adf50] .store_scaling_setspeed+0x80/0xc0 [c0000007d25b7a40] [c0000000007ae270] .store+0xa0/0x100 [c0000007d25b7ae0] [c0000000003566e8] .sysfs_kf_write+0x88/0xb0 [c0000007d25b7b70] [c0000000003553b8] .kernfs_fop_write+0x178/0x260 [c0000007d25b7c10] [c0000000002ac3cc] .__vfs_write+0x3c/0x1c0 [c0000007d25b7cf0] [c0000000002ad584] .vfs_write+0xc4/0x230 [c0000007d25b7d90] [c0000000002aeef8] .SyS_write+0x58/0x100 [c0000007d25b7e30] [c00000000000bfec] system_call+0x38/0xfc Fixes: 09a972d1 (cpufreq: powernv: Report cpu frequency throttling) Reviewed-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by:
-
NeilBrown authored
commit cfd278c2 upstream. Various places assume that if nfs4_fl_prepare_ds() turns a non-NULL 'ds', then ds->ds_clp will also be non-NULL. This is not necessasrily true in the case when the process received a fatal signal while nfs4_pnfs_ds_connect is waiting in nfs4_wait_ds_connect(). In that case ->ds_clp may not be set, and the devid may not recently have been marked unavailable. So add a test for ds_clp == NULL and return NULL in that case. Fixes: c23266d5 ("NFS4.1 Fix data server connection race") Signed-off-by:
NeilBrown <neilb@suse.com> Acked-by:
Olga Kornievskaia <aglo@umich.edu> Acked-by:
Adamson, Andy <William.Adamson@netapp.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit 79f687a3 upstream. Ben Coddington reports that commit 311324ad, by adding the function nfs_dir_mapping_need_revalidate() that checks page cache validity on each call to nfs_readdir() causes a performance regression when the directory is being modified. If the directory is changing while we're iterating through the directory, POSIX does not require us to invalidate the page cache unless the user calls rewinddir(). However, we still do want to ensure that we use readdirplus in order to avoid a load of stat() calls when the user is doing an 'ls -l' workload. The fix should be to invalidate the page cache immediately when we're setting the NFS_INO_ADVISE_RDPLUS bit. Reported-by:
Benjamin Coddington <bcodding@redhat.com> Fixes: 311324ad ("NFS: Be more aggressive in using readdirplus...") Reviewed-by:
-
Trond Myklebust authored
commit ee284e35 upstream. We must put the task to sleep while holding the inode->i_lock in order to ensure atomicity with the test for NFS_LAYOUT_RETURN. Fixes: 500d701f ("NFS41: make close wait for layoutreturn") Signed-off-by:
-
Neil Armstrong authored
commit f24d311f upstream. The pinctrl_gpio_request is called with the "full" gpio number, already containing the base, then meson_pmx_request_gpio is then called with the final pin number. Remove the base addition when calling meson_pmx_disable_other_groups. Fixes: 6ac73095 ("pinctrl: add driver for Amlogic Meson SoCs") CC: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Kevin Hilman <khilman@baylibre.com> Acked-by:
Beniamino Galvani <b.galvani@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Jeff Mahoney authored
commit aa7c8da3 upstream. In __btrfs_run_delayed_refs, the error path when run_delayed_extent_op fails sets locked_ref->processing = 0 but doesn't re-increment delayed_refs->num_heads_ready. As a result, we end up triggering the WARN_ON in btrfs_select_ref_head. Fixes: d7df2c79 (Btrfs: attach delayed ref updates to delayed ref heads) Reported-by:
Jon Nelson <jnelson-suse@jamponi.net> Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
