This driver does not currently use uart_console_write() and instead
provides is own LF to LFCR conversion in it's console_write() method.
We should use the library function instead.

Cmopile tested only (with ARCH=arm).
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Tobias Klauser <tklauser@distanz.ch>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-serial@vger.kernel.org
Cc: nios2-dev@lists.rocketboards.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Olof Johansson pointed out that usually the company name is picked as
namespace prefix to specific properties. So expect "energymicro,location"
but fall back to the previously introduced name "efm32,location".

Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

To support big-endian CPUs use the string versions of the io
read/write macros on the TX/RX fifos and the non-raw variants of
the readl/writel macros throughout. This way we don't byteswap
the characters coming from the fifos but we properly deal with
the little-endian nature of the serial hardware while controlling
it.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The TXX9_SIFCR_TDIL_MASK define is cut and pasted twice so we can delete
the second instance.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blackfin uart port drivers mistakenly set the struct uart_port
flags bit UPF_BUG_THRE (which only has meaning to the 8250 core)
while trying to set ASYNC_CTS_FLOW.

Uart port drivers can override termios settings based on actual
hardware support in their .set_termios method; the serial core
sets the appropriate port flags based on the overrides.
Overriding only the initial termios settings is accomplished
by only perform those overrides if the old termios parameter is
NULL.

CC: Sonic Zhang <sonic.zhang@analog.com>
CC: adi-buildroot-devel@lists.sourceforge.net
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Uart port drivers may reconfigure termios settings based on available
hardware support; set/clear ASYNC_CTS_FLOW and ASYNC_CHECK_CD _after_
calling the port driver's .set_termios method.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty_port_close_start() already validates the port counts and issues
a diagnostic if validation fails.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since at least before 2.6.30, it has not been possible to observe
a hung up file pointer in a tty driver's open() method unless/until
the driver open() releases the tty_lock() (eg., before blocking).

This is because tty_open() adds the file pointer while holding
the tty_lock() _and_ doesn't release the lock until after calling
the tty driver's open() method. [ Before tty_lock(), this was
lock_kernel(). ]

Since __tty_hangup() first waits on the tty_lock() before
enumerating and hanging up the open file pointers, either
__tty_hangup() will wait for the tty_lock() or tty_open() will
not yet have added the file pointer. For example,

CPU 0                          |  CPU 1
                               |
tty_open                       |  __tty_hangup
  ..                           |    ..
  tty_lock                     |    ..
  tty_reopen                   |    tty_lock  / blocks
  ..                           |
  tty_add_file(tty, filp)      |
  ..                           |
  tty->ops->open(tty, filp)    |
    tty_port_open              |
      tty_port_block_til_ready |
        ..                     |
        while (1)              |
          ..                   |
          tty_unlock           |    / unblocks
          schedule             |    for each filp on tty->tty_files
                               |      f_ops = tty_hung_up_fops;
                               |    ..
                               |    tty_unlock
          tty_lock             |
  ..                           |
  tty_unlock                   |

Note that since tty_port_block_til_ready() and similar drop
the tty_lock while blocking, when woken, the file pointer
must then be tested for having been hung up.

Also, fix bit-rotted drivers that used extra_count to track the
port->count bump.

CC: Mikael Starvik <starvik@axis.com>
CC: Samuel Ortiz <samuel@sortiz.org>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix ASYNC_* constant usage that should be the corresponding UPF_*
constant.

CC: Grant Likely <grant.likely@linaro.org>
CC: Rob Herring <robh+dt@kernel.org>
CC: devicetree@vger.kernel.org
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty->closing cannot be set on ipw_open() because the ipwireless tty
driver does not call any functions that set tty->closing.

CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty->closing informs the line discipline that the hardware will
be shutting down imminently, and to disable further input other
than soft flow control (but to still allow additional output).

However, the tty lock is the necessary lock for preventing
concurrent changes to tty->closing. As shown by the call-tree
audit [1] of functions that modify tty->closing, the tty lock
is already held for those functions.

[1]
Call-tree audit of functions that modify tty->closing
* does not include call tree to tty_port_close(), tty_port_close_start(),
  or tty_port_close_end() which is already documented in
  'tty: Document locking for tty_port_close{,start,end}' that shows
  callers to those 3 functions hold the tty lock

tty_release()
  tty->ops->close() --+
                      |
__tty_hangup()        |
  tty->ops->close() --+
                      |
        mp_close():drivers/staging/sb105x/sb_pci_mp.c
        dngc_tty_close():drivers/staging/dgnc/dgnc_tty.c
        dgap_tty_close():drivers/staging/dgap/dgap_tty.c
        dgrp_tty_close():drivers/staging/dgrp/dgrp_tty.c
        rp_close():drivers/tty/rocket.c
        hvsi_close():drivers/tty/hvc/hvsi.c
        rs_close():drivers/tty/serial/68328serial.c
        rs_close():drivers/tty/serial/crisv10.c
        uart_close():drivers/tty/serial/serial_core.c
        isdn_tty_close():drivers/isdn/i4l/isdn_tty.c
        tty3215_close():drivers/s390/char/con3215.c

tty_open()
  tty_ldisc_setup() ----+
                        |
__tty_hangup()          |
  tty_ldisc_hangup() ---+
                        |
tty_set_ldisc() --------+
  tty_ldisc_restore() --+
                        |
                        +- tty_ldisc_open()
                             ld->ops->open() --+
                                               |
                                               +- n_tty_open()
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The tty lock is held when the tty driver's hangup() method is called
(from the lone call-site, __tty_hangup()). The call-tree audit [1]
of tty_port_hangup() is a closed graph of the callers of
tty_port_hangup(); ie., all callers originate only from __tty_hangup().

Of these callers, none drop the tty lock prior to calling
tty_port_hangup().

[1]
Call-tree audit of tty_port_hangup()

__tty_hangup()
  tty->ops->hangup() --+
                       |
        rs_hangup():arch/ia64/hp/sim/simserial.c
        line_hangup():arch/um/drivers/line.c
        gdm_tty_hangup():drivers/staging/gdm724x/gdm_tty.c
        fwtty_hangup():drivers/staging/fwserial/fwserial.c
        acm_tty_hangup():drivers/usb/class/cdc-acm.c
        serial_hangup():drivers/usb/serial/usb-serial.c
        ipoctal_hangup():drivers/ipack/devices/ipoctal.c
        cy_hangup():drivers/tty/cyclades.c
        isicom_hangup():drivers/tty/isicom.c
        rp_hangup():drivers/tty/rocket.c
        dashtty_hangup():drivers/tty/metag_da.c
        moxa_hangup():drivers/tty/moxa.c
        gsmtty_hangup():drivers/tty/n_gsm.c
        goldfish_tty_hangup():drivers/tty/goldfish.c
        ehv_bc_tty_hangup():drivers/tty/ehv_bytechan.c
        mxser_hangup():drivers/tty/mxser.c
        kgdb_nmi_tty_hangup():drivers/tty/serial/kgdb_nmi.c
        ifx_spi_hangup():drivers/tty/serial/ifx6x60.c
        ntty_hangup():drivers/tty/nozomi.c
        capinc_tty_hangup():drivers/isdn/capi/capi.c
        mgslpc_hangup():drivers/char/pcmcia/synclink_cs.c
        sdio_uart_hangup():drivers/mmc/card/sdio_uart.c
        rfcomm_tty_hangup():net/bluetooth/rfcomm/tty.c
                       |
                       +- tty_port_hangup()
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The tty lock is held when the tty driver's open() method is called
(from tty_open()). The call-tree audit [1] of tty_port_block_til_ready()
is a closed graph of the callers of tty_port_block_til_ready();
ie., all callers originate only from tty_open().

Of these callers, none drop the tty lock.

Also, document tty_port_block_til_ready() may drop and reacquire
the tty lock when blocking, which means the tty or tty_port may have
changed state.

[1]
Call-tree audit of tty_port_block_til_ready()
* does not include call tree of tty_port_open() which is already
  documented in 'tty: Document locking from tty_port_open()'

tty_open()
  tty->ops->open() --+
                     |
        cy_open():drivers/tty/cyclades.c
        rp_open():drivers/tty/rocket.c
        rs_open():drivers/tty/amiserial.c
        moxa_open():drivers/tty/moxa.c
        gsmtty_open():drivers/tty/n_gsm.c
        rs_open():drivers/tty/serial/68328serial.c
        uart_open():drivers/tty/serial/serial_core.c
        isdn_tty_open():drivers/isdn/i4l/isdn_tty.c
        mgslpc_open():drivers/char/pcmcia/synclink_cs.c
                     |
                     +- tty_port_block_til_ready()
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The tty lock is held when the tty driver's open method is called
(from the lone call-site, tty_open()). The call-tree audit [1] of
tty_port_open() is a closed graph of the callers of tty_port_open();
ie., all callers originate from only tty_open().

Of these callers, none drop the tty lock.

Also, document that tty_port_block_til_ready() may drop and reacquire
the tty lock when blocking, which means the tty or tty_port may have
changed state.

[1]
Call-tree audit of tty_port_open()

tty_open()
  tty->ops->open() --+
                     |
        rs_open():arch/ia64/hp/sim/simserial.c
       *line_open():arch/um/drivers/line.c
        gdm_tty_open():drivers/staging/gdm724x/gdm_tty.c
        fwtty_open():drivers/staging/fwserial/fwserial.c
        acm_tty_open():drivers/usb/class/cdc-acm.c
        serial_open():drivers/usb/serial/usb-serial.c
        pti_tty_driver_open():drivers/misc/pti.c
        ipoctal_open():drivers/ipack/devices/ipoctal.c
        isicom_open():drivers/tty/isicom.c
        dashtty_open():drivers/tty/metag_da.c
        goldfish_tty_open():drivers/tty/goldfish.c
        ehv_bc_tty_open():drivers/tty/ehv_bytechan.c
        mxser_open():drivers/tty/mxser.c
        kgdb_nmi_tty_open():drivers/tty/serial/kgdb_nmi.c
        ifx_spi_open():drivers/tty/serial/ifx6x60.c
        smd_tty_open():drivers/tty/serial/msm_smd_tty.c
        ntty_open():drivers/tty/nozomi.c
        capinc_tty_open():drivers/isdn/capi/capi.c
        tpk_open():drivers/char/ttyprintk.c
        sdio_uart_open():drivers/mmc/card/sdio_uart.c
        rfcomm_tty_open():net/bluetooth/rfcomm/tty.c
                     |
                     +- tty_port_open()

* line_open() is the .open method for 2 um drivers
  declared in ./arch/um/drivers/stdio_console.c and
  in ./arch/um/drivers/ssl.c, and not called directly
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The tty lock is held when the tty driver's .close method is called
(from the two lone call-sites of tty_release() and __tty_hangup()).
The call-tree audit[1] of tty_port_close(), tty_port_close_start,
and tty_port_close_end() is a closed graph of the callers of these
3 functions; ie., all callers originate from only tty_release()
or __tty_hangup().

Of these callers, none drop the tty lock.

Also, document tty_port_close_start() may drop and reacquire the
tty lock in tty_wait_until_sent_from_close(), which means the tty
or tty_port may have changed state (but not reopened or hung up).

[1]
Call-tree audit of tty_port_close, tty_port_close_start, and tty_port_close_end()

tty_release()
  tty->ops->close() --+
                      |
__tty_hangup()        |
  tty->ops->close() --+
                      |
                      +- rp_close():drivers/tty/rocket.c -------------------+
                      +- uart_close():drivers/tty/serial/serial_core.c -----+
                      |                                                     +- tty_port_close_start()
                      |
                      |
                      +- close():drivers/tty/synclinkmp.c ------------------+
                      +- rs_close():drivers/tty/amiserial.c ----------------+
                      +- gsmtty_close():drivers/tty/n_gsm.c ----------------+
                      +- mxser_close():drivers/tty/mxser.c -----------------+
                      +- close():drivers/tty/synclink_gt.c -----------------+
                      +- mgsl_close():drivers/tty/synclink.c ---------------+
                      +- isdn_tty_close():drivers/isdn/i4l/isdn_tty.c ------+
                      +- mgslpc_close():drivers/char/pcmcia/synclink_cs.c --+
                      +- ircomm_tty_close():net/irda/ircomm/ircomm_tty.c ---+
                      |                                                     |
        rs_close():arch/ia64/hp/sim/simserial.c                             |
       *line_close():arch/um/drivers/line.c                                 |
        gdm_tty_close():drivers/staging/gdm724x/gdm_tty.c
        fwtty_close():drivers/staging/fwserial/fwserial.c
        acm_tty_close():drivers/usb/class/cdc-acm.c
        serial_close():drivers/usb/serial/usb-serial.c
        pti_tty_driver_close():drivers/misc/pti.c
        ipoctal_close():drivers/ipack/devices/ipoctal.c
        cy_close():drivers/tty/cyclades.c
        isicom_close():drivers/tty/isicom.c
        dashtty_close():drivers/tty/metag_da.c
        moxa_close():drivers/tty/moxa.c
        goldfish_tty_close():drivers/tty/goldfish.c
        ehv_bc_tty_close():drivers/tty/ehv_bytechan.c
        kgdb_nmi_tty_close():drivers/tty/serial/kgdb_nmi.c
        ifx_spi_close():drivers/tty/serial/ifx6x60.c
        smd_tty_close():drivers/tty/serial/msm_smd_tty.c
        ntty_close():drivers/tty/nozomi.c
        capinc_tty_close():drivers/isdn/capi/capi.c
        tpk_close():drivers/char/ttyprintk.c
        sdio_uart_close():drivers/mmc/card/sdio_uart.c                      |
        rfcomm_tty_close():net/bluetooth/rfcomm/tty.c                       |
                      |                                                     |
                      +- tty_port_close():drivers/tty/tty_port.c -----------+
                                                                            |
                                                                            +- tty_port_close_start()
                                                                            +- tty_port_close_end()

* line_close() is the .close method for 2 um drivers,
  declared in ./arch/um/drivers/stdio_console.c and
  in ./arch/um/drivers/ssl.c, and not called directly
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The tty core calls the tty driver's open, close and hangup
methods holding the tty lock.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The DMA burst size must match the transmit FIFO depth in order
to make sure all character are transmitted. This patch calculates
DMA burst size by using FIFO depth rather than use the hardcoded
16 bytes. This is required since some UARTs (e.g. UART2 on Vybrid)
have a FIFO depth of 8 bytes.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The DMA RX timeout calculation is done based on FIFO buffer size and
port timeout when setting up DMA. However, both variables are not
necessarily initialized at DMA initialization time, which can lead
to a division by zero.

Move the timeout calculation to set_termios where both variables
are initialized.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When a tty is opened for the serial console, the termios c_cflag
settings are inherited from the console line settings.
However, if the tty is subsequently closed, the termios settings
are lost. This results in a garbled console if the console is later
suspended and resumed.

Preserve the termios c_cflag for the serial console when the tty
is shutdown; this reflects the most recent line settings.

Fixes: Bugzilla #69751, 'serial console does not wake from S3'
Reported-by: Valerio Vanni <valerio.vanni@inwind.it>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Rx dma descriptor allocated without the DMA_ACK flags so that
once after tarnsfer done or terminated, client can ack the descriptor
to free it for later use.

If the Rx DMA is terminated for some reason then rx-dma descriptor
is not getting acked which causes the memory leak and list of usage
desc to grow continuously.

Hence, acknowledge the rx-dma descriptor once transfer is terminated
to avoid memory leak and desc list to grow.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When channel is require to stop transmit then update the Tx circular
buffer only when DMA based transfer is in progress. If there is no
DMA based transfer then no need to update the Tx buffer.
Signed-off-by: Pradeep Goudagunta <pgoudagunta@nvidia.com>
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Every uart driver that provides a console driver needs to
be built-in for the console code to work, we get a build
error for modular console drivers.

This changes the SERIAL_HS_LPC32XX_CONSOLE symbol to depend
on the SERIAL_HS_LPC32XX driver being built-in, just like
we do for all the other uart drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When CONFIG_SERIAL_PXA_CONSOLE is disabled, the serial_pxa_get_poll_char
and serial_pxa_put_poll_char functions are not defined, and we can't
reference them.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

With recent improvements to serial/of core from Grant and Rob,
stdout-path alone suffices for setting up earlycon/console.

arc_uart driver is already equipped to handle that, switch the DT now.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This allows a param less earlycon to pick up the earlyconsole from
chosen/stdout-path
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

With ARC uart driver switching to generic earlycon, we no longer need
this ugliness. You won't be missed.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

With this change both earlyprintk and earlycon coexist
We switch over to latter in next patch
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ARC UART MMIO helpers would take arc_uart_port and then reference
generic uart_port->membase member. So change them to difrectly refer to
uart_port and fix call sites accordingly.

This removes the need for to_arc_port() converion almost eveeywhere and
makes code a bit easier to read.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

First try to find the named clock variants then fall back to the already
existing handling of a nameless declared baudclk.

This also adds the missing documentation for this already existing variant.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The flags member has upf_t type and corresponding macros to define them. This
patch converts ASYNC_SKIP_TEST to UPF_SKIP_TEST in 8250_dw.c.

Otherwise we got a sparse warning:
drivers/tty/serial/8250/8250_dw.c:302:46: warning: restricted upf_t degrades to integer
drivers/tty/serial/8250/8250_dw.c:302:62: warning: restricted upf_t degrades to integer
drivers/tty/serial/8250/8250_dw.c:302:26: warning: incorrect type in assignment (different base types)
drivers/tty/serial/8250/8250_dw.c:302:26:    expected restricted upf_t [usertype] flags
drivers/tty/serial/8250/8250_dw.c:302:26:    got unsigned int
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This replaces the Baytrail specific custom set_termios hook
with a more generic one where the clock framework is used to
set the rate. The method also doesn't need to be limited to
just Baytrail, so it's used with all ACPI platforms.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When building multi_v7_defconfig with CONFIG_ARM_LPAE=y the following warning
is seen:

drivers/tty/serial/samsung.c: In function 's3c24xx_serial_init_port':
drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat]

Use %pa to print 'resource_size_t' type to fix the warning.
Reported-by: Olof's autobuilder <build@lixom.net>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a risk that the variable will be used without being initialized.

This was largely found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

the current codes send 1 bytes, then after getting TX done interrupt,
send subsequent bytes. it causes redundant interrupts.
for example, if we have 3 bytes in TX buffer, the TX flow is:
1. send 1 byte
2. get TX down interrupt
3. send the left 2 bytes
4. get TX down interrupt

this patch moves to send more bytes and decrease interrupts, the new
flow is:
1. send 3 bytes
2. get TX down interrupt
Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>