- 22 Aug, 2017 1 commit
-
-
https://github.com/Xilinx/linux-xlnxArnd Bergmann authored
Pull "arm64: Xilinx ZynqMP DT fixes for v4.14" from Michal Simek: - Fix DTC warnings - Add idle states, OP, cci-400, RTC, pcie prefetchable memory fpd/lpd dmas, clocks for ep108 - Enable can1 - Fix smmu IRQ, aliases, uart compatible string - Use generic compatible string for i2c eeprom * tag 'zynqmp-dt-for-4.14' of https://github.com/Xilinx/linux-xlnx: arm64: zynqmp: Add generic compatible string for I2C EEPROM arm64: zynqmp: Add missing mmc aliases in ep108 arm64: zynqmp: Enable can1 for ep108 arm64: zynqmp: Added clocks to DT for ep108 arm64: zynqmp: Use C pre-processor for includes arm64: zynqmp: Add fpd/lpd dmas arm64: zynqmp: Set status disabled in dtsi arm64: zynqmp: Add new uartps compatible string arm64: zynqmp: Correct IRQ nr for the SMMU arm64: zynqmp: Add support for RTC arm64: zynqmp: Adding prefetchable memory space to pcie node arm64: zynqmp: Add CCI-400 node arm64: zynqmp: Add dcc console for zynqmp arm64: zynqmp: Add operating points arm64: zynqmp: Add idle state for ZynqMP arm64: zynqmp: Add references to cpu nodes arm64: zynqmp: Move nodes which have no reg property out of bus arm64: zynqmp: Remove leading 0s from mtd table for spi flashes arm64: dts: xilinx: fix PCI bus dtc warnings
-
- 21 Aug, 2017 18 commits
-
-
Javier Martinez Canillas authored
The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
-
Michal Simek authored
Add missing mmc aliases. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
-
Naga Sureshkumar Relli authored
This patch enables can1 for ep108. Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com> Reviewed-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
-
VNSL Durga authored
Added clks for ep108 platform. Signed-off-by: VNSL Durga <vnsldurg@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
-
Alistair Francis authored
Change the dtsi include code to use the C pre-processor #include instead of the device tree /include/. This enables option to use dt binding headers. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
-
Michal Simek authored
Wire fpd and lpd dma channels to zynqmp.dtsi. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
-
Naga Sureshkumar Relli authored
Do not enable smmu via dtsi. Enable it in board file when needed. Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
-
Michal Simek authored
Mainline kernel has r1p12 compatible string now. Use this new compatible string and also append generic compatible string. Keep in your mind that using this generic compatible string not all uart features will be available. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Moritz Fischer <mdf@kernel.org>
-
Edgar E. Iglesias authored
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
-
Michal Simek authored
Add support for RTC. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
-
Bharat Kumar Gogada authored
Adding prefetchable memory space to pcie device tree node. Shifting configuration space to 64-bit address space. Removing pcie device tree node from amba as it requires size-cells=<2> in order to access 64-bit address space. Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
-
Michal Simek authored
Add CCI-400 node to DTSI. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
-
Michal Simek authored
Add debug console to dtsi to be able to enable it in board dts file. Keep in your mind that every core has separate dcc port in case you want to run SMP kernel. DCC is very helpful communication channel for debugging. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
-
Shubhrajyoti Datta authored
Adding operating-points-v2 for zynqmp. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
-
Stefan Krsmanovic authored
Added the idle-states node to describe zynqmp idle states. Only cpu-sleep-0 idle state is added in this patch. References to the idle-states node are added in all CPU nodes. Time values: entry/exit latencies and min-residency, needs to be tuned. arm,psci-suspend-param is selected to comply with PSCIv1.0 and Extended StateID format. Signed-off-by: Stefan Krsmanovic <stefan.krsmanovic@aggios.com> Acked-by: Will Wong <willw@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
-
Michal Simek authored
Add missing references to all cpu nodes. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Moritz Fischer <mdf@kernel.org>
-
Michal Simek authored
Nodes without reg properties shouldn't be placed in amba node. Move them out. Warnings: arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg): Node /amba/misc_clk missing or empty reg/ranges property arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg): Node /amba/i2c_clk missing or empty reg/ranges property arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg): Node /amba/sata_clk missing or empty reg/ranges property arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg): Signed-off-by: Michal Simek <michal.simek@xilinx.com>
-
Arnd Bergmann authored
Merge tag 'sunxi-dt64-for-4.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64 Pull "Allwinner arm64 device tree changes for 4.14, round 2" from Chen-Yu Tsai: The usual improvement patches: - PMIC, USB and WiFi enabled for Bananapi M64 - New board added: NanoPi A64 - New board added: Olimex A64-OLinuXino * tag 'sunxi-dt64-for-4.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: allwinner: a64: Add A64-OLinuXino initial support arm64: allwinner: a64: Add initial NanoPi A64 support arm64: allwinner: a64: add proper support for the Wi-Fi on BPi M64 arm64: allwinner: a64: enable AXP803 for Banana Pi M64 arm64: allwinner: a64: enable USB host controller for BPi M64
-
- 18 Aug, 2017 9 commits
-
-
git://git.infradead.org/linux-mvebuArnd Bergmann authored
Pull "mvebu dt64 for 4.14 (part 2)" from Gregory CLEMENT: - Enable uSD on ESPRESSObin (Armada 37xx based board) - Add NAND support on Armada 7K/8K SoCs - Enable USB host on Armada-7040-DB and Armada-8040-DB boards * tag 'mvebu-dt64-4.14-2' of git://git.infradead.org/linux-mvebu: ARM64: dts: marvell: enable USB host on Armada-8040-DB ARM64: dts: marvell: enable USB host on Armada-7040-DB ARM64: dts: marvell: add NAND support on the CP110 ARM64: dts: marvell: armada-37xx: Enable uSD on ESPRESSObin arm64: dts: marvell: Fully re-order nodes in Marvell CP110 dtsi files
-
Rob Herring authored
dtc recently added PCI bus checks. Fix these warnings. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Duc Dang <dhdang@apm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'renesas-arm64-dt2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64 Pull "Second Round of Renesas ARM64 Based SoC DT Updates for v4.14" from Simon Horman: * Add PFC device node to R-Car D3 (r8a77995) This is a step towards enabling devices that use multiplexed pins - including ethernet - on boards that use the r8a7796 SoC. * Add USB nodes to R-Car M3-W (r8a7796) This is a step towards enabling USB devices on boards that use the r8a7796 SoC. * Use newly added Gen-3 fallback compat string This is consistent with ongoing efforts to use per-generation fallback strings where appropriate across devices found on R-Car SoCs. The aim of the effort being to strike a balance between the limited information available about the compatibility of devices found on different SoCs and the desire to ease enabling devices on new SoCs. This has no run-time effect due to the presence of a per-SoC compat string. * Cleanup whitespace and extra LVDS port label Minor cleanups, no run-time effect. * tag 'renesas-arm64-dt2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: r8a77995: add pfc device node arm64: dts: r8a7796: Add HSUSB device node arm64: dts: r8a7796: Add USB-DMAC device nodes arm64: dts: r8a7796: Add USB3.0 host device node arm64: dts: r8a7796: add USB2.0 Host (EHCI/OHCI) device nodes arm64: dts: r8a7796: add usb2_phy device nodes arm64: dts: r8a7795: correct whitespace of companion property arm64: dts: r8a7795: Use R-Car SATA Gen3 fallback compat string arm64: dts: salvator-common: Remove extra LVDS port label
-
Arnd Bergmann authored
Merge tag 'qcom-arm64-for-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64 Pull "Qualcomm ARM64 Updates for v4.14 Part 2" from Andy Gross: * Add IPQ8074 SoC and HK01 board support * tag 'qcom-arm64-for-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: Add ipq8074 SoC and HK01 board support
-
Arnd Bergmann authored
Merge tag 'zte-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64 Pull "ZTE arm64 device tree updates for 4.14" from Shawn Guo: - A clean up patch from Shawn Lin to remove the deprecated dwmmc property 'num-slots' from ZX296718 device tree. - Enable various devices for ZX296718 SoC support, VGA display, I2S audio, pinctrl, GPIO, PWM and IRDEC. - Update zx296718-evb support to use audio-graph-card for HDMI audio and add I2S sound card. - Add initial zx296718-pcbox board support with storage, audio, display devices enabled. * tag 'zte-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: zte: add initial zx296718-pcbox board support arm64: dts: zx296718-evb: add I2S sound card support arm64: dts: zx296718-evb: use audio-graph-card for HDMI audio arm64: dts: zx296718: add irdec device for remote control arm64: dts: zx296718: add PWM device support arm64: dts: zx296718: add voltage data into OPP table arm64: dts: zx296718: set a better parent clock for I2S0 arm64: dts: zx296718: add pinctrl and gpio devices arm64: dts: zx296718: add I2S and I2C audio codec arm64: dts: zx296718: add VGA device support arm64: dts: zte: remove num-slots from zx296718
-
Arnd Bergmann authored
Merge tag 'imx-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64 Pull "Freescale arm64 device tree updates for 4.14" from Shawn Guo: - Correct the typo in fsl-ls1088a-rdb board name. - A series from Horia Geantă to consolidate aliases node and enable crypto support for ls208xa and ls1088a. - Enable USB host support for ls1012a. - Enable cpuidle support for ls1088a and ls208xa. * tag 'imx-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: ls1088: Correction in Board name from "L1088A" to "LS1088A" arm64: dts: ls208xa: add cpu idle support arm64: dts: ls1088a: add cpu idle support arm64: dts: freescale: ls1088a: add crypto node arm64: dts: freescale: ls208xa: add crypto node arm64: dts: freescale: ls208xa: share aliases node arm64: dts: ls1012a: add USB host controller nodes
-
http://github.com/Broadcom/stblinuxArnd Bergmann authored
Pull "Broadcom devicetree-arm64 changes for 4.14" from Florian Fainelli: This pull request contains Broadcom ARM64-based SoCs Device Tree changes for 4.14, please pull the following: - Scott moves all the Northstar 2 DTS files into a sub-directory to be consistent with what was done for stingray and to future proof the addition of new board DTS files - Velibor adds the ARM CCN-502 interconnect DT node to the Stingray SoC DTS include file - Srinath adds the MDIO multiplexer and SATA nodes to the Stingray DTS include files - Anup adds the SP804 timers, FlexRM (mailbox) and RAID engine DT nodes to the Stingray DTS include files - Abishek adds the BGMAC (Ethernet controller) node to the Stingray DTS files * tag 'arm-soc/for-4.14/devicetree-arm64' of http://github.com/Broadcom/stblinux: arm64: dts: Add SBA-RAID DT nodes for Stingray SoC arm64: dts: Add FlexRM DT nodes for Stingray arm64: dts: Add SATA DT nodes for Stingray SoC arm64: dts: Add DT node to enable BGMAC driver on Stingray arm64: dts: Add sp804 DT nodes for Stingray SoC arm64: dts: Add MDIO multiplexer DT node for Stingray arm64: dts: Enable stats for CCN-502 interconnect on Stingray arm64: dts: move ns2 into northstar2 directory
-
https://github.com/mbgg/linux-mediatekArnd Bergmann authored
Pull "arm: mediatek: dts64 updates for v4.14" from Matthias Brugger: - add SoC mt7622 and its reference board - cleanup of dts bindings - mt6797: add watchdog and delete unused clock - add support for SoC mt2701 and it's eval board * tag 'v4.13-next-dts64' of https://github.com/mbgg/linux-mediatek: arm64: dts: Add Mediatek SoC MT2712 and evaluation board dts and Makefile dt-bindings: arm: Add bindings for Mediatek MT2712 SoC Platform arm64: dts: mediatek: Delete unused dummy clock for MT6797 arm64: dts: mediatek: add watchdog to MT6797 ARM: mediatek: dts: Add MT6797 binding ARM: mediatek: dts: Cleanup bindings documentation arm64: dts: mt7622: add dts file for MT7622 reference board variant 1 arm64: dts: mt7622: add basic nodes to the mt7622.dtsi file
-
Varadarajan Narayanan authored
Add initial device tree support for the Qualcomm IPQ8074 SoC and HK01 evaluation board. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
-
- 17 Aug, 2017 12 commits
-
-
yt.shen@mediatek.com authored
This adds basic chip support for Mediatek 2712 Signed-off-by: YT Shen <yt.shen@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
-
yt.shen@mediatek.com authored
This adds dt-binding documentation for Mediatek MT2712. Only include very basic items: cpu, gic and uart. Signed-off-by: YT Shen <yt.shen@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
-
Matthias Brugger authored
After adding the clock subsystem to the SOC, the dummy clock clk32k is not longer needed. Delete it. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
-
Matthias Brugger authored
This patch adds the watchdog driver to the MT6797 SoC. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
-
Matthias Brugger authored
This patch adds the binding for the MT6797 SoC. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Rob Herring <robh@kernel.org>
-
Arnd Bergmann authored
Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64 Pull "Amlogic 64-bit DT updates for v4.14" from Kevin Hilman: - add GPIO line names to a few boards - MMC regulator settle time updates - misc cleanups/fixups * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-gx: use stable UART bindings with correct gate clock ARM64: dts: meson-gxbb-nanopi-k2: Add GPIO lines names ARM64: dts: meson-gxl-khadas-vim: Add GPIO lines names ARM64: dts: meson-gxbb: p20x: add card regulator settle times dt-bindings: amlogic: add unstable statement ARM64: dts: meson-gx: Add SoC info register ARM64: dts: meson-gx: consistently use the GIC_SPI and IRQ type macros
-
Yoshihiro Shimoda authored
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Yoshihiro Shimoda authored
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Yoshihiro Shimoda authored
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Yoshihiro Shimoda authored
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Yoshihiro Shimoda authored
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Yoshihiro Shimoda authored
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-