- 06 Sep, 2015 1 commit
-
-
Paolo Bonzini authored
This does not show up on all compiler versions, so it sneaked into the first 4.3 pull request. The fix is to mimic the logic of the "print sptes" loop in the "fill array" loop. Then leaf and root can be both initialized unconditionally. Note that "leaf" now points to the first unused element of the array, not the last filled element. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- 03 Sep, 2015 4 commits
-
-
Greg Kurz authored
Signed-off-by:
Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Thomas Huth authored
The size of the Problem State Priority Boost Register is only 32 bits, but the kvm_vcpu_arch->pspb variable is declared as "ulong", ie. 64-bit. However, the assembler code accesses this variable with 32-bit accesses, and the KVM_REG_PPC_PSPB macro is defined with SIZE_U32, too, so that the current code is broken on big endian hosts: kvmppc_get_one_reg_hv() will only return zero for this register since it is using the wrong half of the pspb variable. Let's fix this problem by adjusting the size of the pspb field in the kvm_vcpu_arch structure. Signed-off-by:
Thomas Huth <thuth@redhat.com> Signed-off-by:
-
Gautham R. Shenoy authored
The code that handles the case when we receive a H_DOORBELL interrupt has a comment which says "Hypervisor doorbell - exit only if host IPI flag set". However, the current code does not actually check if the host IPI flag is set. This is due to a comparison instruction that got missed. As a result, the current code performs the exit to host only if some sibling thread or a sibling sub-core is exiting to the host. This implies that, an IPI sent to a sibling core in (subcores-per-core != 1) mode will be missed by the host unless the sibling core is on the exit path to the host. This patch adds the missing comparison operation which will ensure that when HOST_IPI flag is set, we unconditionally exit to the host. Fixes: 66feed61 Cc: stable@vger.kernel.org # v4.1+ Signed-off-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
Gautham R. Shenoy authored
The current dynamic micro-threading code has a race due to which a secondary thread naps when it is supposed to be running a vcpu. As a side effect of this, on a guest exit, the primary thread in kvmppc_wait_for_nap() finds that this secondary thread hasn't cleared its vcore pointer. This results in "CPU X seems to be stuck!" warnings. The race is possible since the primary thread on exiting the guests only waits for all the secondaries to clear its vcore pointer. It subsequently expects the secondary threads to enter nap while it unsplits the core. A secondary thread which hasn't yet entered the nap will loop in kvm_no_guest until its vcore pointer and the do_nap flag are unset. Once the core has been unsplit, a new vcpu thread can grab the core and set the do_nap flag *before* setting the vcore pointers of the secondary. As a result, the secondary thread will now enter nap via kvm_unsplit_nap instead of running the guest vcpu. Fix this by setting the do_nap flag after setting the vcore pointer in the PACA of the secondary in kvmppc_run_core. Also, ensure that a secondary thread doesn't nap in kvm_unsplit_nap when the vcore pointer in its PACA struct is set. Fixes: b4deba5cSigned-off-by:
-
- 22 Aug, 2015 14 commits
-
-
git://github.com/agraf/linux-2.6Paolo Bonzini authored
Patch queue for ppc - 2015-08-22 Highlights for KVM PPC this time around: - Book3S: A few bug fixes - Book3S: Allow micro-threading on POWER8
-
Paolo Bonzini authored
Merge tag 'kvm-arm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-queue KVM/ARM changes for 4.3 - Full debug support for arm64 - Active state switching for timer interrupts - Lazy FP/SIMD save/restore for arm64 - Generic ARMv8 target
-
Sam bobroff authored
In 64 bit kernels, the Fixed Point Exception Register (XER) is a 64 bit field (e.g. in kvm_regs and kvm_vcpu_arch) and in most places it is accessed as such. This patch corrects places where it is accessed as a 32 bit field by a 64 bit kernel. In some cases this is via a 32 bit load or store instruction which, depending on endianness, will cause either the lower or upper 32 bits to be missed. In another case it is cast as a u32, causing the upper 32 bits to be cleared. This patch corrects those places by extending the access methods to 64 bits. Signed-off-by:
Sam Bobroff <sam.bobroff@au1.ibm.com> Reviewed-by:
Laurent Vivier <lvivier@redhat.com> Reviewed-by:
Alexander Graf <agraf@suse.de>
-
Paul Mackerras authored
Whenever a vcore state is VCORE_PREEMPT we need to be counting stolen time for it. This currently isn't the case when we have a vcore that no longer has any runnable threads in it but still has a runner task, so we do an explicit call to kvmppc_core_start_stolen() in that case. Signed-off-by:
-
Paul Mackerras authored
When a vcore gets preempted, we put it on the preempted vcore list for the current CPU. The runner task then calls schedule() and comes back some time later and takes itself off the list. We need to be careful to lock the list that it was put onto, which may not be the list for the current CPU since the runner task may have moved to another CPU. Signed-off-by:
-
Paul Mackerras authored
This adds implementations for the H_CLEAR_REF (test and clear reference bit) and H_CLEAR_MOD (test and clear changed bit) hypercalls. When clearing the reference or change bit in the guest view of the HPTE, we also have to clear it in the real HPTE so that we can detect future references or changes. When we do so, we transfer the R or C bit value to the rmap entry for the underlying host page so that kvm_age_hva_hv(), kvm_test_age_hva_hv() and kvmppc_hv_get_dirty_log() know that the page has been referenced and/or changed. These hypercalls are not used by Linux guests. These implementations have been tested using a FreeBSD guest. Signed-off-by:
-
Paul Mackerras authored
This fixes a bug in the tracking of pages that get modified by the guest. If the guest creates a large-page HPTE, writes to memory somewhere within the large page, and then removes the HPTE, we only record the modified state for the first normal page within the large page, when in fact the guest might have modified some other normal page within the large page. To fix this we use some unused bits in the rmap entry to record the order (log base 2) of the size of the page that was modified, when removing an HPTE. Then in kvm_test_clear_dirty_npages() we use that order to return the correct number of modified pages. The same thing could in principle happen when removing a HPTE at the host's request, i.e. when paging out a page, except that we never page out large pages, and the guest can only create large-page HPTEs if the guest RAM is backed by large pages. However, we also fix this case for the sake of future-proofing. The reference bit is also subject to the same loss of information. We don't make the same fix here for the reference bit because there isn't an interface for userspace to find out which pages the guest has referenced, whereas there is one for userspace to find out which pages the guest has modified. Because of this loss of information, the kvm_age_hva_hv() and kvm_test_age_hva_hv() functions might incorrectly say that a page has not been referenced when it has, but that doesn't matter greatly because we never page or swap out large pages. Signed-off-by:
-
Paul Mackerras authored
The reference (R) and change (C) bits in a HPT entry can be set by hardware at any time up until the HPTE is invalidated and the TLB invalidation sequence has completed. This means that when removing a HPTE, we need to read the HPTE after the invalidation sequence has completed in order to obtain reliable values of R and C. The code in kvmppc_do_h_remove() used to do this. However, commit 6f22bd32 ("KVM: PPC: Book3S HV: Make HTAB code LE host aware") removed the read after invalidation as a side effect of other changes. This restores the read of the HPTE after invalidation. The user-visible effect of this bug would be that when migrating a guest, there is a small probability that a page modified by the guest and then unmapped by the guest might not get re-transmitted and thus the destination might end up with a stale copy of the page. Fixes: 6f22bd32Signed-off-by:
-
Paul Mackerras authored
This builds on the ability to run more than one vcore on a physical core by using the micro-threading (split-core) modes of the POWER8 chip. Previously, only vcores from the same VM could be run together, and (on POWER8) only if they had just one thread per core. With the ability to split the core on guest entry and unsplit it on guest exit, we can run up to 8 vcpu threads from up to 4 different VMs, and we can run multiple vcores with 2 or 4 vcpus per vcore. Dynamic micro-threading is only available if the static configuration of the cores is whole-core mode (unsplit), and only on POWER8. To manage this, we introduce a new kvm_split_mode struct which is shared across all of the subcores in the core, with a pointer in the paca on each thread. In addition we extend the core_info struct to have information on each subcore. When deciding whether to add a vcore to the set already on the core, we now have two possibilities: (a) piggyback the vcore onto an existing subcore, or (b) start a new subcore. Currently, when any vcpu needs to exit the guest and switch to host virtual mode, we interrupt all the threads in all subcores and switch the core back to whole-core mode. It may be possible in future to allow some of the subcores to keep executing in the guest while subcore 0 switches to the host, but that is not implemented in this patch. This adds a module parameter called dynamic_mt_modes which controls which micro-threading (split-core) modes the code will consider, as a bitmap. In other words, if it is 0, no micro-threading mode is considered; if it is 2, only 2-way micro-threading is considered; if it is 4, only 4-way, and if it is 6, both 2-way and 4-way micro-threading mode will be considered. The default is 6. With this, we now have secondary threads which are the primary thread for their subcore and therefore need to do the MMU switch. These threads will need to be started even if they have no vcpu to run, so we use the vcore pointer in the PACA rather than the vcpu pointer to trigger them. It is now possible for thread 0 to find that an exit has been requested before it gets to switch the subcore state to the guest. In that case we haven't added the guest's timebase offset to the timebase, so we need to be careful not to subtract the offset in the guest exit path. In fact we just skip the whole path that switches back to host context, since we haven't switched to the guest context. Signed-off-by:
-
Paul Mackerras authored
When running a virtual core of a guest that is configured with fewer threads per core than the physical cores have, the extra physical threads are currently unused. This makes it possible to use them to run one or more other virtual cores from the same guest when certain conditions are met. This applies on POWER7, and on POWER8 to guests with one thread per virtual core. (It doesn't apply to POWER8 guests with multiple threads per vcore because they require a 1-1 virtual to physical thread mapping in order to be able to use msgsndp and the TIR.) The idea is that we maintain a list of preempted vcores for each physical cpu (i.e. each core, since the host runs single-threaded). Then, when a vcore is about to run, it checks to see if there are any vcores on the list for its physical cpu that could be piggybacked onto this vcore's execution. If so, those additional vcores are put into state VCORE_PIGGYBACK and their runnable VCPU threads are started as well as the original vcore, which is called the master vcore. After the vcores have exited the guest, the extra ones are put back onto the preempted list if any of their VCPUs are still runnable and not idle. This means that vcpu->arch.ptid is no longer necessarily the same as the physical thread that the vcpu runs on. In order to make it easier for code that wants to send an IPI to know which CPU to target, we now store that in a new field in struct vcpu_arch, called thread_cpu. Reviewed-by:
-
Tudor Laurentiu authored
On this switch branch the regs initialization doesn't happen so add it. This was found with the help of a static code analysis tool. Signed-off-by:
Laurentiu Tudor <Laurentiu.Tudor@freescale.com> Signed-off-by:
-
Thomas Huth authored
When compiling the KVM code for POWER with "make C=1", sparse complains about functions missing proper prototypes and a 64-bit constant missing the ULL prefix. Let's fix this by making the functions static or by including the proper header with the prototypes, and by appending a ULL prefix to the constant PPC_MPPE_ADDRESS_MASK. Signed-off-by:
-
Thomas Huth authored
Since the PPC970 support has been removed from the kvm-hv kernel module recently, we should also reflect this change in the help text of the corresponding Kconfig option. Signed-off-by:
-
Tudor Laurentiu authored
This was signaled by a static code analysis tool. Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
- 19 Aug, 2015 2 commits
-
-
Mario Smarduch authored
After enhancing arm64 FP/SIMD exit handling, ARMv7 VFP exit branch is moved to guest trap handling. This allows us to keep exit handling flow between both architectures consistent. Signed-off-by:
Mario Smarduch <m.smarduch@samsung.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Mario Smarduch authored
This patch only saves and restores FP/SIMD registers on Guest access. To do this cptr_el2 FP/SIMD trap is set on Guest entry and later checked on exit. lmbench, hackbench show significant improvements, for 30-50% exits FP/SIMD context is not saved/restored [chazy/maz: fixed save/restore logic for 32bit guests] Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
-
- 14 Aug, 2015 1 commit
-
-
Andy Lutomirski authored
VMX encodes access rights differently from LAR, and the latter is most likely what x86 people think of when they think of "access rights". Rename them to avoid confusion. Cc: kvm@vger.kernel.org Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
- 13 Aug, 2015 1 commit
-
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-20150812' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: fix and feature for kvm/next (4.3) 1. error handling for irq routes 2. Gracefully handle STP time changes s390 supports a protocol for syncing different systems via the stp protocol that will steer the TOD clocks to keep all participating clocks below the round trip time between the system. In case of specific out of sync event Linux can opt-in to accept sync checks. This will result in non-monotonic jumps of the TOD clock, which Linux will correct via time offsets to keep the wall clock time monotonic. Now: KVM guests also base their time on the host TOD, so we need to fixup the offset for them as well.
-
- 12 Aug, 2015 12 commits
-
-
Marc Zyngier authored
In order to remove the crude hack where we sneak the masked bit into the timer's control register, make use of the phys_irq_map API control the active state of the interrupt. This causes some limited changes to allow for potential error propagation. Reviewed-by:
-
Marc Zyngier authored
Virtual interrupts mapped to a HW interrupt should only be triggered from inside the kernel. Otherwise, you could end up confusing the kernel (and the GIC's) state machine. Rearrange the injection path so that kvm_vgic_inject_irq is used for non-mapped interrupts, and kvm_vgic_inject_mapped_irq is used for mapped interrupts. The latter should only be called from inside the kernel (timer, irqfd). Reviewed-by:
-
Marc Zyngier authored
In order to control the active state of an interrupt, introduce a pair of accessors allowing the state to be set/queried. This only affects the logical state, and the HW state will only be applied at world-switch time. Acked-by:
-
Marc Zyngier authored
To allow a HW interrupt to be injected into a guest, we lookup the guest virtual interrupt in the irq_phys_map list, and if we have a match, encode both interrupts in the LR. We also mark the interrupt as "active" at the host distributor level. On guest EOI on the virtual interrupt, the host interrupt will be deactivated. Reviewed-by:
-
Marc Zyngier authored
In order to be able to feed physical interrupts to a guest, we need to be able to establish the virtual-physical mapping between the two worlds. The mappings are kept in a set of RCU lists, indexed by virtual interrupts. Reviewed-by:
-
Marc Zyngier authored
We only set the irq_queued flag for level interrupts, meaning that "!vgic_irq_is_queued(vcpu, irq)" is a good enough predicate for all interrupts. This will allow us to inject edge HW interrupts, for which the state ACTIVE+PENDING is not allowed. Reviewed-by:
-
Marc Zyngier authored
Now that struct vgic_lr supports the LR_HW bit and carries a hwirq field, we can encode that information into the list registers. This patch provides implementations for both GICv2 and GICv3. Reviewed-by:
-
Marc Zyngier authored
As we're about to cram more information in the vgic_lr structure (HW interrupt number and additional state information), we switch to a layout similar to the HW's: - use bitfields to save space (we don't need more than 10 bits to represent the irq numbers) - source CPU and HW interrupt can share the same field, as a SGI doesn't have a physical line. Reviewed-by:
Alex Bennée <alex.bennee@linaro.org> Reviewed-by:
-
Marc Zyngier authored
As we're about to introduce some serious GIC-poking to the vgic code, it is important to make sure that we're going to poke the part of the GIC that belongs to the CPU we're about to run on (otherwise, we'd end up with some unexpected interrupts firing)... Introducing a non-preemptible section in kvm_arch_vcpu_ioctl_run prevents the problem from occuring. Reviewed-by:
-
Marc Zyngier authored
As we now inject the timer interrupt when we're about to enter the guest, it makes a lot more sense to make sure this happens before the vgic code queues the pending interrupts. Otherwise, we get the interrupt on the following exit, which is not great for latency (and leads to all kind of bizarre issues when using with active interrupts at the HW level). Signed-off-by:
-
Vladimir Murzin authored
Since commit 8a14849b (arm64: KVM: Switch vgic save/restore to alternative_insn) vgic_sr_vectors is not used anymore, so remove remaining leftovers and kill the structure. Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by:
-
Suzuki K. Poulose authored
This patch adds a generic ARM v8 KVM target cpu type for use by the new CPUs which eventualy ends up using the common sys_reg table. For backward compatibility the existing targets have been preserved. Any new target CPU that can be covered by generic v8 sys_reg tables should make use of the new generic target. Signed-off-by:
Suzuki K. Poulose <suzuki.poulose@arm.com> Acked-by:
-
- 11 Aug, 2015 2 commits
-
-
Wei Huang authored
According to AMD programmer's manual, AMD PERFCTRn is 64-bit MSR which, unlike Intel perf counters, doesn't require signed extension. This patch removes the unnecessary conversion in SVM vPMU code when PERFCTRn is being updated. Signed-off-by:
Wei Huang <wei@redhat.com> Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
-
Nicholas Krause authored
This fixes error handling in the function kvm_lapic_sync_from_vapic by checking if the call to kvm_read_guest_cached has returned a error code to signal to its caller the call to this function has failed and due to this we must immediately return to the caller of kvm_lapic_sync_from_vapic to avoid incorrectly call apic_set_tpc if a error has occurred here. Signed-off-by:
Nicholas Krause <xerofoify@gmail.com> Signed-off-by:
-
- 07 Aug, 2015 1 commit
-
-
Nicholas Krause authored
This fixes the assumption that kvm_set_irq_routing is always run successfully by instead making it equal to the variable r which we use for returning in the function kvm_arch_vm_ioctl instead of making r equal to zero when calling this particular function and incorrectly making the caller of kvm_arch_vm_ioctl think the function has run successfully. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
- 05 Aug, 2015 2 commits
-
-
Xiao Guangrong authored
The logic used to check ept misconfig is completely contained in common reserved bits check for sptes, so it can be removed Signed-off-by:
Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by:
-
Xiao Guangrong authored
The #PF with PFEC.RSV = 1 is designed to speed MMIO emulation, however, it is possible that the RSV #PF is caused by real BUG by mis-configure shadow page table entries This patch enables full check for the zero bits on shadow page table entries (which includes not only bits reserved by the hardware, but also bits that will never be set in the SPTE), then dump the shadow page table hierarchy. Signed-off-by:
-
