- 18 Apr, 2022 19 commits
-
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Introduce line card support for modular switch Jiri says: This patchset introduces support for modular switch systems and also introduces mlxsw support for NVIDIA Mellanox SN4800 modular switch. It contains 8 slots to accommodate line cards - replaceable PHY modules which may contain gearboxes. Currently supported line card: 16X 100GbE (QSFP28) Other line cards that are going to be supported: 8X 200GbE (QSFP56) 4X 400GbE (QSFP-DD) There may be other types of line cards added in the future. To be consistent with the port split configuration (splitter cabels), the line card entities are treated in the similar way. The nature of a line card is not "a pluggable device", but "a pluggable PHY module". A concept of "provisioning" is introduced. The user may "provision" certain slot with a line card type. Driver then creates all instances (devlink ports, netdevices, etc) related to this line card type. It does not matter if the line card is plugged-in at the time. User is able to configure netdevices, devlink ports, setup port splitters, etc. From the perspective of the switch ASIC, all is present and can be configured. The carrier of netdevices stays down if the line card is not plugged-in. Once the line card is inserted and activated, the carrier of the related netdevices is then reflecting the physical line state, same as for an ordinary fixed port. Once user does not want to use the line card related instances anymore, he can "unprovision" the slot. Driver then removes the instances. Patches 1-4 are extending devlink driver API and UAPI in order to register, show, dump, provision and activate the line card. Patches 5-17 are implementing the introduced API in mlxsw. The last patch adds a selftest for mlxsw line cards. Example: $ devlink port # No ports are listed $ devlink lc pci/0000:01:00.0: lc 1 state unprovisioned supported_types: 16x100G lc 2 state unprovisioned supported_types: 16x100G lc 3 state unprovisioned supported_types: 16x100G lc 4 state unprovisioned supported_types: 16x100G lc 5 state unprovisioned supported_types: 16x100G lc 6 state unprovisioned supported_types: 16x100G lc 7 state unprovisioned supported_types: 16x100G lc 8 state unprovisioned supported_types: 16x100G Note that driver exposes list supported line card types. Currently there is only one: "16x100G". To provision the slot #8: $ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G $ devlink lc show pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 state active type 16x100G supported_types: 16x100G $ devlink port pci/0000:01:00.0/0: type notset flavour cpu port 0 splittable false pci/0000:01:00.0/53: type eth netdev enp1s0nl8p1 flavour physical lc 8 port 1 splittable true lanes 4 pci/0000:01:00.0/54: type eth netdev enp1s0nl8p2 flavour physical lc 8 port 2 splittable true lanes 4 pci/0000:01:00.0/55: type eth netdev enp1s0nl8p3 flavour physical lc 8 port 3 splittable true lanes 4 pci/0000:01:00.0/56: type eth netdev enp1s0nl8p4 flavour physical lc 8 port 4 splittable true lanes 4 pci/0000:01:00.0/57: type eth netdev enp1s0nl8p5 flavour physical lc 8 port 5 splittable true lanes 4 pci/0000:01:00.0/58: type eth netdev enp1s0nl8p6 flavour physical lc 8 port 6 splittable true lanes 4 pci/0000:01:00.0/59: type eth netdev enp1s0nl8p7 flavour physical lc 8 port 7 splittable true lanes 4 pci/0000:01:00.0/60: type eth netdev enp1s0nl8p8 flavour physical lc 8 port 8 splittable true lanes 4 pci/0000:01:00.0/61: type eth netdev enp1s0nl8p9 flavour physical lc 8 port 9 splittable true lanes 4 pci/0000:01:00.0/62: type eth netdev enp1s0nl8p10 flavour physical lc 8 port 10 splittable true lanes 4 pci/0000:01:00.0/63: type eth netdev enp1s0nl8p11 flavour physical lc 8 port 11 splittable true lanes 4 pci/0000:01:00.0/64: type eth netdev enp1s0nl8p12 flavour physical lc 8 port 12 splittable true lanes 4 pci/0000:01:00.0/125: type eth netdev enp1s0nl8p13 flavour physical lc 8 port 13 splittable true lanes 4 pci/0000:01:00.0/126: type eth netdev enp1s0nl8p14 flavour physical lc 8 port 14 splittable true lanes 4 pci/0000:01:00.0/127: type eth netdev enp1s0nl8p15 flavour physical lc 8 port 15 splittable true lanes 4 pci/0000:01:00.0/128: type eth netdev enp1s0nl8p16 flavour physical lc 8 port 16 splittable true lanes 4 To uprovision the slot #8: $ devlink lc set pci/0000:01:00.0 lc 8 notype ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Introduce basic line card manipulation which consists of provisioning, unprovisioning and activation of a line card. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Jiri Pirko authored
For each port get slot_index using PMLP register. For ports residing on a linecard, identify it with the linecard by setting mapping using devlink_port_linecard_set() helper. Use linecard slot index for PMTDB register queries. Signed-off-by:
-
Jiri Pirko authored
In case of line card implementation, the core has to have a way to remove relevant ports manually. Extend the Spectrum driver ops by an op that implements port removal of selected ports upon request. Signed-off-by:
-
Jiri Pirko authored
Allow to process events generated upon line card getting "ready" and "active". When DSDSC event with "ready" bit set is delivered, that means the line card is powered up. Use MDDC register to push the line card to active state. Once FW is done with that, the DSDSC event with "active" bit set is delivered. Signed-off-by:
-
Jiri Pirko authored
Introduce objects for line cards and an infrastructure around that. Use devlink_linecard_create/destroy() to register the line card with devlink core. Implement provisioning ops with a list of supported line cards. Signed-off-by:
-
Jiri Pirko authored
The MBCT register allows to transfer binary INI codes from the host to the management FW by transferring it by chunks of maximum 1KB. Signed-off-by:
-
Jiri Pirko authored
The MDDC register allows to control downstream devices and line cards. Signed-off-by:
-
Jiri Pirko authored
The MDDQ register allows to query the DownStream device properties. Signed-off-by:
-
Jiri Pirko authored
Register PMLPE trap and process the port mapping changes delivered by it by creating related ports. Note that this happens after provisioning. The INI of the linecard is processed and merged by FW. PMLPE is generated for each port. Process this mapping change. Layout of PMLPE is the same as layout of PMLP. Signed-off-by:
-
Jiri Pirko authored
No need to hold the lock for alloc and freecpu. So narrow the critical section. Follow-up patch is going to benefit from this by adding more code to the functions which will be out of the critical as well. Signed-off-by:
-
Jiri Pirko authored
The PMECR register is used to enable/disable event triggering in case of local port mapping change. Signed-off-by:
-
Jiri Pirko authored
Instead of array of pointers to port mapping structures, allocate the array of structures directly. Signed-off-by:
-
Jiri Pirko authored
So far, the lane index always started from zero. That is not true for modular systems with gearbox-equipped linecards. Loose the check so the lanes can start from non-zero index. Signed-off-by:
-
Jiri Pirko authored
In order to properly inform user about relationship between port and line card, introduce a driver API to set line card for a port. Use this information to extend port devlink netlink message by line card index and also include the line card index into phys_port_name and by that into a netdevice name. Signed-off-by:
-
Jiri Pirko authored
Allow driver to mark a line card as active. Expose this state to the userspace over devlink netlink interface with proper notifications. 'active' state means that line card was plugged in after being provisioned. Signed-off-by:
-
Jiri Pirko authored
In order to be able to configure all needed stuff on a port/netdevice of a line card without the line card being present, introduce line card provisioning. Basically by setting a type, provisioning process will start and driver is supposed to create a placeholder for instances (ports/netdevices) for a line card type. Allow the user to query the supported line card types over line card get command. Then implement two netlink command SET to allow user to set/unset the card type. On the driver API side, add provision/unprovision ops and supported types array to be advertised. Upon provision op call, the driver should take care of creating the instances for the particular line card type. Introduce provision_set/clear() functions to be called by the driver once the provisioning/unprovisioning is done on its side. These helpers are not to be called directly due to the async nature of provisioning. Example: $ devlink port # No ports are listed $ devlink lc pci/0000:01:00.0: lc 1 state unprovisioned supported_types: 16x100G lc 2 state unprovisioned supported_types: 16x100G lc 3 state unprovisioned supported_types: 16x100G lc 4 state unprovisioned supported_types: 16x100G lc 5 state unprovisioned supported_types: 16x100G lc 6 state unprovisioned supported_types: 16x100G lc 7 state unprovisioned supported_types: 16x100G lc 8 state unprovisioned supported_types: 16x100G $ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G $ devlink lc show pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 state active type 16x100G supported_types: 16x100G $ devlink port pci/0000:01:00.0/0: type notset flavour cpu port 0 splittable false pci/0000:01:00.0/53: type eth netdev enp1s0nl8p1 flavour physical lc 8 port 1 splittable true lanes 4 pci/0000:01:00.0/54: type eth netdev enp1s0nl8p2 flavour physical lc 8 port 2 splittable true lanes 4 pci/0000:01:00.0/55: type eth netdev enp1s0nl8p3 flavour physical lc 8 port 3 splittable true lanes 4 pci/0000:01:00.0/56: type eth netdev enp1s0nl8p4 flavour physical lc 8 port 4 splittable true lanes 4 pci/0000:01:00.0/57: type eth netdev enp1s0nl8p5 flavour physical lc 8 port 5 splittable true lanes 4 pci/0000:01:00.0/58: type eth netdev enp1s0nl8p6 flavour physical lc 8 port 6 splittable true lanes 4 pci/0000:01:00.0/59: type eth netdev enp1s0nl8p7 flavour physical lc 8 port 7 splittable true lanes 4 pci/0000:01:00.0/60: type eth netdev enp1s0nl8p8 flavour physical lc 8 port 8 splittable true lanes 4 pci/0000:01:00.0/61: type eth netdev enp1s0nl8p9 flavour physical lc 8 port 9 splittable true lanes 4 pci/0000:01:00.0/62: type eth netdev enp1s0nl8p10 flavour physical lc 8 port 10 splittable true lanes 4 pci/0000:01:00.0/63: type eth netdev enp1s0nl8p11 flavour physical lc 8 port 11 splittable true lanes 4 pci/0000:01:00.0/64: type eth netdev enp1s0nl8p12 flavour physical lc 8 port 12 splittable true lanes 4 pci/0000:01:00.0/125: type eth netdev enp1s0nl8p13 flavour physical lc 8 port 13 splittable true lanes 4 pci/0000:01:00.0/126: type eth netdev enp1s0nl8p14 flavour physical lc 8 port 14 splittable true lanes 4 pci/0000:01:00.0/127: type eth netdev enp1s0nl8p15 flavour physical lc 8 port 15 splittable true lanes 4 pci/0000:01:00.0/128: type eth netdev enp1s0nl8p16 flavour physical lc 8 port 16 splittable true lanes 4 $ devlink lc set pci/0000:01:00.0 lc 8 notype Signed-off-by: -
Jiri Pirko authored
Extend the devlink API so the driver is going to be able to create and destroy linecard instances. There can be multiple line cards per devlink device. Expose this new type of object over devlink netlink API to the userspace, with notifications. Signed-off-by:
-
Eric Dumazet authored
Kernel test robot reported: smatch warnings: net/ipv4/tcp_input.c:5966 tcp_rcv_established() warn: unsigned 'reason' is never less than zero. I actually had one packetdrill failing because of this bug, and was about to send the fix :) v2: Andreas Schwab also pointed out that @reason needs to be negated before we reach tcp_drop_reason() Fixes: 4b506af9 ("tcp: add two drop reasons for tcp_ack()") Signed-off-by:Eric Dumazet <edumazet@google.com> Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Andreas Schwab <schwab@linux-m68k.org> Signed-off-by:
-
- 17 Apr, 2022 19 commits
-
-
David S. Miller authored
Eric Dumazet says: ==================== tcp: drop reason additions Currently, TCP is either missing drop reasons, or pretending that some useful packets are dropped. This patch series makes "perf record -a -e skb:kfree_skb" much more usable. ==================== Signed-off-by: -
Eric Dumazet authored
packets in OFO queue might be redundant, and dropped. tcp_drop() is no longer needed. Signed-off-by:
-
Eric Dumazet authored
Re-use existing reasons. Signed-off-by:
-
Eric Dumazet authored
1) A valid RST packet should be consumed, to not confuse drop monitor. 2) Same remark for packet validating cross syn setup, even if we might ignore part of it. 3) When third packet of 3WHS is delayed, do not pretend the SYNACK was dropped. Signed-off-by:
-
Eric Dumazet authored
Add one reason for packets dropped from OFO queue because of memory pressure. Signed-off-by:
-
Eric Dumazet authored
Add TCP_TOO_OLD_ACK and TCP_ACK_UNSENT_DATA drop reasons so that tcp_rcv_established() can report them. Signed-off-by:
-
Eric Dumazet authored
Add basic support for drop reasons in tcp_rcv_state_process() Signed-off-by:
-
Eric Dumazet authored
tcp_rcv_state_process() incorrectly drops packets instead of consuming it, making drop monitor very noisy, if not unusable. Calling tcp_time_wait() or tcp_done() is part of standard behavior, packets triggering these actions were not dropped. Signed-off-by:
-
Eric Dumazet authored
Creates four new drop reasons for the following cases: 1) packet being rejected by RFC 7323 PAWS check 2) packet being rejected by SEQUENCE check 3) Invalid RST packet 4) Invalid SYN packet Signed-off-by:
-
Eric Dumazet authored
Small cleanup in tcp_validate_incoming(), no need for rst_seq_match setting and testing. Signed-off-by:
-
Eric Dumazet authored
Whenever tcp_validate_incoming() handles a valid RST packet, we should not pretend the packet was dropped. Create a special section at the end of tcp_validate_incoming() to handle this case. Signed-off-by:
-
David S. Miller authored
Ansuel Smith says: ==================== net: Reduce qca8k_priv space usage These 6 patch is a first attempt at reducting qca8k_priv space. The code changed a lot during times and we have many old logic that can be replaced with new implementation The first patch drop the tracking of MTU. We mimic what was done for mtk and we change MTU only when CPU port is changed. The second patch finally drop a piece of story of this driver. The ar8xxx_port_status struct was used by the first implementation of this driver to put all sort of status data for the port... With the evolution of DSA all that stuff got dropped till only the enabled state was the only part of the that struct. Since it's overkill to keep an array of int, we convert the variable to a simple u8 where we store the status of each port. This is needed to don't reanable ports on system resume. The third patch is a preparation for patch 4. As Vladimir explained in another patch, we waste a tons of space by keeping a duplicate of the switch dsa ops in qca8k_priv. The only reason for this is to dynamically set the correct mdiobus configuration (a legacy dsa one, or a custom dedicated one) To solve this problem, we just drop the phy_read/phy_write and we declare a custom mdiobus in any case. This way we can use a static dsa switch ops struct and we can drop it from qca8k_priv Patch 4 drop the duplicated dsa_switch_ops. Patch 5 is a fixup for mdio read error. Patch 6 is an effort to standardize how bus name are done. This series is just a start of more cleanup. The idea is to move this driver to the qca dir and split common code from specific code. Also the mgmt eth code still requires some love and can totally be optimized by recycling the same skb over time. Also while working on the MTU it was notice some problem with the stmmac driver and with the reloading phase that cause all sort of problems with qca8k. I'm sending this here just to try to keep small series instead of proposing monster series hard to review. v2: - Rework MTU patch v3: - Drop unrealated changes from patch 3 - Add fixup patch for mdio read - Unify bus name for legacy and OF mdio bus ==================== Signed-off-by: -
Ansuel Smith authored
Add support for multiple switch with OF mdio bus declaration. Unify the bus id naming and use the same logic for both legacy and OF mdio bus. Signed-off-by:
Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by:
-
Ansuel Smith authored
Restore original way to handle mdio read error by returning 0xffff. This was wrongly changed when the internal_mdio_read was introduced, now that both legacy and internal use the same function, make sure that they behave the same way. Fixes: ce062a0a ("net: dsa: qca8k: fix kernel panic with legacy mdio mapping") Signed-off-by:
-
Ansuel Smith authored
Now that dsa_switch_ops is not switch specific anymore, we can drop it from qca8k_priv and use the static ops directly for the dsa_switch pointer. Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
Ansuel Smith authored
In an attempt to reduce qca8k_priv space, rework and simplify mdiobus logic. We now declare a mdiobus instead of relying on DSA phy_read/write even if a mdio node is not present. This is all to make the qca8k ops static and not switch specific. With a legacy implementation where port doesn't have a phy map declared in the dts with a mdio node, we declare a 'qca8k-legacy' mdiobus. The conversion logic is used as legacy read and write ops are used instead of the internal one. Also drop the legacy_phy_port_mapping as we now declare mdiobus with ops that already address the workaround. Signed-off-by:
-
Ansuel Smith authored
Port_sts is a thing of the past for this driver. It was something present on the initial implementation of this driver and parts of the original struct were dropped over time. Using an array of int to store if a port is enabled or not to handle PM operation seems overkill. Switch and use a simple u8 to store the port status where each bit correspond to a port. (bit is set port is enabled, bit is not set, port is disabled) Also add some comments to better describe why we need to track port status. Signed-off-by:
-
Ansuel Smith authored
DSA set the CPU port based on the largest MTU of all the slave ports. Based on this we can drop the MTU array from qca8k_priv and set the port_change_mtu logic on DSA changing MTU of the CPU port as the switch have a global MTU settingfor each port. Signed-off-by:
-
Arun Ajith S authored
Add a new neighbour cache entry in STALE state for routers on receiving an unsolicited (gratuitous) neighbour advertisement with target link-layer-address option specified. This is similar to the arp_accept configuration for IPv4. A new sysctl endpoint is created to turn on this behaviour: /proc/sys/net/ipv6/conf/interface/accept_unsolicited_na. Signed-off-by:
Arun Ajith S <aajith@arista.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
- 15 Apr, 2022 2 commits
-
-
Eric Dumazet authored
idev can be NULL, as the surrounding code suggests. Fixes: 4daf841a ("net: ipv6: add skb drop reasons to ip6_rcv_core()") Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
For some unknown reason qdisc_reset() is using a convoluted way of freeing two lists of skbs. Use __skb_queue_purge() instead. Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20220414011004.2378350-1-eric.dumazet@gmail.comSigned-off-by:
-
