Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Inspect the return value of register_netdev() in the driver probe routine and
return -ENODEV in case of error.
Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of {ai,ao}_cmdtest().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Inspect the return value of register_netdev() in the driver probe routine and
return -ENODEV in case of error.
Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The following errors and warnings fixed.
- ERROR: code indent should use tabs where possible
- WARNING: please, no spaces at the start of a line
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The following warning fixed.
- WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The following warning fixed.
- WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The following error fixed.
- ERROR: "foo ** bar" should be "foo **bar"
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The following errors fixed.
- ERROR: "foo * bar" should be "foo *bar"
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The following errors fixed.
- ERROR: space prohibited after that '!' (ctx:BxW)
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The following warnings fixed.
- WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The following error fixed.
- ERROR: "foo ** bar" should be "foo **bar"
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The following warnings fixed.
- WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The following warnings fixed.
- WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The following warnings fixed.
- WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The following errors fixed.
- ERROR: "foo * bar" should be "foo *bar"
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The following warnings fixed.
- WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The following warning fixed.
- WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The following error fixed.
- ERROR: do not initialise statics to 0 or NULL
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The following warnings fixed.
- WARNING: braces {} are not necessary for any arm of this statement
- WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CONFIG_LINE6_USB_DUMP_MIDI is no longer used by the code and therefore
no longer plays a role in CONFIG_LINE6_USB_DUMP_ANY.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA amidi(1) and aseqdump(1) can be used to dump MIDI instead of
manually dumping MIDI messages in the driver.  The advantage of using
these existing tools is that can be used at run-time rather than
compile-time.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CONFIG_LINE6_USB_DUMP_CTRL is no longer used by the code and therefore
no longer plays a role in CONFIG_LINE6_USB_DUMP_ANY.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The usbmon feature should be used instead of manually dumping control
URBs.  There are a few advantages to using usbmon:

 * Can be turned on/off at runtime
 * Provides full USB-level traffic
 * tcpdump and wireshark support for powerful analysis
 * No driver-specific code is required
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The TIOCGSOFTCAR and TIOCSSOFTCAR ioctls are handled by the tty layer
so the dgrp driver shouldn't try to deal with them itself.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Apart from the somewhat unnecessary `BUG_ON()` calls,
`comedi_pci_auto_config()` and `comedi_usb_auto_config()` are just
one-line wrappers around `comedi_auto_config()`, and
`comedi_pci_auto_unconfig()` and `comedi_usb_auto_unconfig()` are just
one-line wrappers around `comedi_auto_unconfig()`.  Convert them to
inline functions and remove the `BUG_ON()` calls.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

No comedi drivers set the `attach_pci()` or `attach_usb()` handlers in
their `struct comedi_driver` any longer as they have all been replaced
with an `auto_attach()` handler.  Also, no code calls the `attach_pci()`
or `attach_usb()` handlers any longer.  Remove them from `struct
comedi_driver`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`comedi_auto_config()` just calls internal function
`comedi_auto_config_helper()`, passing it a wrapper function
`comedi_auto_config_wrapper()` to handle the specifics of checking and
calling the low-level comedi driver's `auto_attach()` handler.

Since there are no other callers of `comedi_auto_config_helper()` or
`comedi_auto_config_wrapper()`, combine everything into the single
exported function `comedi_auto_config()`.

Change the ordering of the check for existence of the low-level comedi
driver's `auto_attach()` handler and the allocation of the comedi minor
device number.  This means the log message warning of the absence of the
handler now has to be refer to the hardware device instead of the
not-yet-allocated comedi device.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no need for `comedi_pci_auto_config()` and
`comedi_usb_auto_config()` to check that `driver->auto_attach` is
non-null before calling `comedi_auto_attach()` as this check is done by
`comedi_auto_config()` itself (actually by
`comedi_auto_config_wrapper()`).  Remove the unnecessary checks.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the Comedi drivers that call `comedi_usb_auto_config()` have
replaced the `attach_usb()` handler in their `struct comedi_driver` with
a `auto_attach()` handler, so there is no need to check for the
existence of the `attach_usb()` handler any more.  Remove this check and
the code that calls it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the Comedi drivers that call `comedi_pci_auto_config()` have
replaced the `attach_pci()` handler in their `struct comedi_driver` with
a `auto_attach()` handler, so there is no need to check for the
existence of the `attach_pci()` handler any more.  Remove this check and
the code that calls it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the Comedi drivers that call `comedi_pci_auto_config()` or
`comedi_usb_auto_config()` define a `auto_attach()` handler in their
`struct comedi_driver`.  There is no need to fall back to abusing the
`attach()` handler any more, so remove the code that supports that.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'addi_apci_1032' driver recently started supporting the
`INSN_CONFIG_DIGITAL_TRIG` configuration instruction, but as no other
drivers were using it before, there was no existing practice of how the
instruction should look.

Define the format to be something a bit more configurable.  In
particular, a subdevice might have more than one trigger requiring an ID
and/or `COMEDI_EV_...` flags to disambiguate them, a trigger might have
more than 32 inputs, and a trigger might need several
`INSN_CONFIG_DIGITAL_TRIG` configuration instructions to configure
completely (if there are more than 32 inputs or if it uses a combination
of edge-triggered and level-triggered inputs).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The newly defined format for the `INSN_CONFIG_DIGITAL_TRIG`
configuration instruction expects 6 data values.  Check the length in
`check_insn_config_length()` before calling the comedi subdevice's
`insn_config` handler.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Conform to the new definition of the `INSN_CONFIG_DIGITAL_TRIG`
configuration instruction.

Return an error if the 'trigger number' in `data[1]` is non-zero or if
the configuration operation in `data[2]` is not supported.  Deal with
the 'left-shift' amount in `data[3]`.

The trigger's input channels can only be configured as a set of rising
and falling edges ('OR' mode) or as a set of high and low levels ('AND'
mode).  Preserve the old input channels to the right of the 'left-shift'
value except when switching modes.

(The 'left-shift' support is a bit of an overkill for this driver since
the trigger only has 16 input channels.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of ni_{ai,ao,cdio}_cmdtest().

Note that all the command triggers in ni_cdio_cmdtest are single source
so the extra tests are not required.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of usbdux_{ai,ao}_cmdtest().

Also, remove some debug noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of usbduxfast_ai_cmdtest().

Also, remove some debug noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>