- 22 Feb, 2021 1 commit
-
-
Petr Mladek authored
-
- 15 Feb, 2021 3 commits
-
-
Timur Tabi authored
If the no_hash_pointers command line parameter is set, then printk("%p") will print pointers as unhashed, which is useful for debugging purposes. This change applies to any function that uses vsprintf, such as print_hex_dump() and seq_buf_printf(). A large warning message is displayed if this option is enabled. Unhashed pointers expose kernel addresses, which can be a security risk. Also update test_printf to skip the hashed pointer tests if the command-line option is set. Signed-off-by:Timur Tabi <timur@kernel.org> Acked-by:
Petr Mladek <pmladek@suse.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Acked-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Marco Elver <elver@google.com> Signed-off-by:
-
Timur Tabi authored
Update the kselftest framework to allow client drivers to specify that some tests were skipped. Signed-off-by:
-
Timur Tabi authored
Instead of defining the total/failed test counters manually, test drivers that are clients of kselftest should use the macro created for this purpose. Signed-off-by:
-
- 10 Feb, 2021 1 commit
-
-
Muchun Song authored
printk_safe_flush_on_panic() caused the following deadlock on our server: CPU0: CPU1: panic rcu_dump_cpu_stacks kdump_nmi_shootdown_cpus nmi_trigger_cpumask_backtrace register_nmi_handler(crash_nmi_callback) printk_safe_flush __printk_safe_flush raw_spin_lock_irqsave(&read_lock) // send NMI to other processors apic_send_IPI_allbutself(NMI_VECTOR) // NMI interrupt, dead loop crash_nmi_callback printk_safe_flush_on_panic printk_safe_flush __printk_safe_flush // deadlock raw_spin_lock_irqsave(&read_lock) DEADLOCK: read_lock is taken on CPU1 and will never get released. It happens when panic() stops a CPU by NMI while it has been in the middle of printk_safe_flush(). Handle the lock the same way as logbuf_lock. The printk_safe buffers are flushed only when both locks can be safely taken. It can avoid the deadlock _in this particular case_ at expense of losing contents of printk_safe buffers. Note: It would actually be safe to re-init the locks when all CPUs were stopped by NMI. But it would require passing this information from arch-specific code. It is not worth the complexity. Especially because logbuf_lock and printk_safe buffers have been obsoleted by the lockless ring buffer. Fixes: cf9b1106 ("printk/nmi: flush NMI messages on the system panic") Signed-off-by:Muchun Song <songmuchun@bytedance.com> Reviewed-by:
-
- 25 Jan, 2021 2 commits
-
-
Petr Mladek authored
-
John Ogness authored
Commit f0e386ee ("printk: fix buffer overflow potential for print_text()") added string termination in record_print_text(). However it used the wrong base pointer for adding the terminator. This led to a 0-byte being written somewhere beyond the buffer. Use the correct base pointer when adding the terminator. Fixes: f0e386ee ("printk: fix buffer overflow potential for print_text()") Reported-by:
Sven Schnelle <svens@linux.ibm.com> Signed-off-by:
John Ogness <john.ogness@linutronix.de> Signed-off-by:
-
- 21 Jan, 2021 1 commit
-
-
Petr Mladek authored
-
- 19 Jan, 2021 1 commit
-
-
John Ogness authored
Before the commit 896fbe20 ("printk: use the lockless ringbuffer"), msg_print_text() would only write up to size-1 bytes into the provided buffer. Some callers expect this behavior and append a terminator to returned string. In particular: arch/powerpc/xmon/xmon.c:dump_log_buf() arch/um/kernel/kmsg_dump.c:kmsg_dumper_stdout() msg_print_text() has been replaced by record_print_text(), which currently fills the full size of the buffer. This causes a buffer overflow for the above callers. Change record_print_text() so that it will only use size-1 bytes for text data. Also, for paranoia sakes, add a terminator after the text data. And finally, document this behavior so that it is clear that only size-1 bytes are used and a terminator is added. Fixes: 896fbe20 ("printk: use the lockless ringbuffer") Cc: stable@vger.kernel.org # 5.10+ Signed-off-by:
-
- 15 Jan, 2021 2 commits
-
-
John Ogness authored
kmsg_dump_get_buffer() uses @syslog to determine if the syslog prefix should be written to the buffer. However, when calculating the maximum number of records that can fit into the buffer, it always counts the bytes from the syslog prefix. Use @syslog when calculating the maximum number of records that can fit into the buffer. Fixes: e2ae715d ("kmsg - kmsg_dump() use iterator to receive log buffer content") Signed-off-by:
-
John Ogness authored
Counting text lines in a record simply involves counting the number of newline characters (+1). However, it is searching the full data block for newline characters, even though the text data can be (and often is) a subset of that area. Since the extra area in the data block was never initialized, the result is that extra newlines may be seen and counted. Restrict newline searching to the text data length. Fixes: b6cf8b3f ("printk: add lockless ringbuffer") Signed-off-by:
-
- 08 Jan, 2021 2 commits
-
-
Petr Mladek authored
This reverts commit 757055ae. The commit caused that ttynull was used as the default console on several systems[1][2][3]. As a result, the console was blank even when a better alternative existed. It happened when there was no console configured on the command line and ttynull_init() was the first initcall calling register_console(). Or it happened when /dev/ did not exist when console_on_rootfs() was called. It was not able to open /dev/console even though a console driver was registered. It tried to add ttynull console but it obviously did not help. But ttynull became the preferred console and was used by /dev/console when it was available later. The commit tried to fix a historical problem that have been there for ages. The primary motivation was the commit 3cffa06a ("printk/console: Allow to disable console output by using console="" or console=null"). It provided a clean solution for a workaround that was widely used and worked only by chance. This revert causes that the console="" or console=null command line options will again work only by chance. These options will cause that a particular console will be preferred and the default (tty) ones will not get enabled. There will be no console registered at all. As a result there won't be stdin, stdout, and stderr for the init process. But it worked exactly this way even before. The proper solution has to fulfill many conditions: + Register ttynull only when explicitly required or as the ultimate fallback. + ttynull should get associated with /dev/console but it must not become preferred console when used as a fallback. Especially, it must still be possible to replace it by a better console later. Such a change requires clean up of the register_console() code. Otherwise, it would be even harder to follow. Especially, the use of has_preferred_console and CON_CONSDEV flag is tricky. The clean up is risky. The ordering of consoles is not well defined. And any changes tend to break existing user settings. Do the revert at the least risky solution for now. [1] https://lore.kernel.org/linux-kselftest/20201221144302.GR4077@smile.fi.intel.com/ [2] https://lore.kernel.org/lkml/d2a3b3c0-e548-7dd1-730f-59bc5c04e191@synopsys.com/ [3] https://patchwork.ozlabs.org/project/linux-um/patch/20210105120128.10854-1-thomas@m3y3r.de/Reported-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by:
Vineet Gupta <vgupta@synopsys.com> Reported-by:
Thomas Meyer <thomas@m3y3r.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull gcc-plugins fix from Kees Cook: "Bump c++ standard version for latest GCC versions (Valdis Kletnieks)" * tag 'gcc-plugins-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: fix gcc 11 indigestion with plugins...
-
- 07 Jan, 2021 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "A couple of core fixes here, both to do with handling of drivers which don't report their maximum speed since we factored some of the handling for transfer speeds out into the core in the previous release. There's also some driver specific fixes, including a relatively large set for some races around timeouts in spi-geni-qcom" * tag 'spi-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fix the divide by 0 error when calculating xfer waiting time spi: Fix the clamping of spi->max_speed_hz spi: altera: fix return value for altera_spi_txrx() spi: stm32: FIFO threshold level - fix align packet size spi: spi-geni-qcom: Print an error when we timeout setting the CS spi: spi-geni-qcom: Don't try to set CS if an xfer is pending spi: spi-geni-qcom: Fail new xfers if xfer/cancel/abort pending spi: spi-geni-qcom: Fix geni_spi_isr() NULL dereference in timeout case
-
Linus Torvalds authored
Merge tag 'regulator-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A few minor driver specific fixes, mostly DT bindings document bits, plus a new device ID" * tag 'regulator-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: qcom-rpmh: add QCOM_COMMAND_DB dependency regulator: qcom-rpmh-regulator: correct hfsmps515 definition dt-bindings: regulator: qcom,rpmh-regulator: add pm8009 revision regulator: bd718x7: Add enable times regulator: pf8x00: Use specific compatible strings for devices
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull regmap fixes from Mark Brown: "A couple of small fixes for leaks when attaching a device to a preexisting regmap" * tag 'regmap-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: debugfs: Fix a reversed if statement in regmap_debugfs_init() regmap: debugfs: Fix a memory leak when calling regmap_attach_dev
-
- 06 Jan, 2021 2 commits
-
-
Valdis Klētnieks authored
Fedora Rawhide has started including gcc 11,and the g++ compiler throws a wobbly when it hits scripts/gcc-plugins: HOSTCXX scripts/gcc-plugins/latent_entropy_plugin.so In file included from /usr/include/c++/11/type_traits:35, from /usr/lib/gcc/x86_64-redhat-linux/11/plugin/include/system.h:244, from /usr/lib/gcc/x86_64-redhat-linux/11/plugin/include/gcc-plugin.h:28, from scripts/gcc-plugins/gcc-common.h:7, from scripts/gcc-plugins/latent_entropy_plugin.c:78: /usr/include/c++/11/bits/c++0x_warning.h:32:2: error: #error This file requires compiler and library support for the ISO C++ 2011 standard. This support must be enabled with the -std=c++11 or -std=gnu++11 compiler options. 32 | #error This file requires compiler and library support \ In fact, it works just fine with c++11, which has been in gcc since 4.8, and we now require 4.9 as a minimum. Signed-off-by:Valdis Kletnieks <valdis.kletnieks@vt.edu> Acked-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/82487.1609006918@turing-police
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "A few more fixes that arrived before the end of the year: - a bunch of fixes related to transaction handle lifetime wrt various operations (umount, remount, qgroup scan, orphan cleanup) - async discard scheduling fixes - fix item size calculation when item keys collide for extend refs (hardlinks) - fix qgroup flushing from running transaction - fix send, wrong file path when there is an inode with a pending rmdir - fix deadlock when cloning inline extent and low on free metadata space" * tag 'for-5.11-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: run delayed iputs when remounting RO to avoid leaking them btrfs: add assertion for empty list of transactions at late stage of umount btrfs: fix race between RO remount and the cleaner task btrfs: fix transaction leak and crash after cleaning up orphans on RO mount btrfs: fix transaction leak and crash after RO remount caused by qgroup rescan btrfs: merge critical sections of discard lock in workfn btrfs: fix racy access to discard_ctl data btrfs: fix async discard stall btrfs: tests: initialize test inodes location btrfs: send: fix wrong file path when there is an inode with a pending rmdir btrfs: qgroup: don't try to wait flushing if we're already holding a transaction btrfs: correctly calculate item size used when item key collision happens btrfs: fix deadlock when cloning inline extent and low on free metadata space
-
- 05 Jan, 2021 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull vhost bugfix from Michael Tsirkin: "This fixes configs with vhost vsock behind a viommu" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost/vsock: add IOTLB API support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Here is a collection of USB- and HD-audio fixes. Most of them are device-specific quirks while one fix is for a regression due to an incorrect mutex unlock introduced in this merge window" * tag 'sound-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/via: Fix runtime PM for Clevo W35xSS ALSA: usb-audio: Add quirk for RC-505 ALSA: hda/hdmi: Fix incorrect mutex unlock in silent_stream_disable() ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7 ALSA: hda/realtek: Add two "Intel Reference board" SSID in the ALC256. ALSA: hda/realtek: Add mute LED quirk for more HP laptops ALSA: hda/conexant: add a new hda codec CX11970 ALSA: usb-audio: Add quirk for BOSS AD-10 ALSA: usb-audio: Fix UBSAN warnings for MIDI jacks ALSA: hda/realtek - Modify Dell platform name ALSA: hda/realtek - Fix speaker volume control on Lenovo C940
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC updates from Vineet Gupta: "Things are quieter on upstreaming front as we are mostly focusing on ARCv3/ARC64 port. This contains just build system updates from Masahiro Yamada" * tag 'arc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: build: use $(READELF) instead of hard-coded readelf ARC: build: remove unneeded extra-y ARC: build: move symlink creation to arch/arc/Makefile to avoid race ARC: build: add boot_targets to PHONY ARC: build: add uImage.lzma to the top-level target ARC: build: remove non-existing bootpImage from KBUILD_IMAGE
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Networking fixes, including fixes from netfilter, wireless and bpf trees. Current release - regressions: - mt76: fix NULL pointer dereference in mt76u_status_worker and mt76s_process_tx_queue - net: ipa: fix interconnect enable bug Current release - always broken: - netfilter: fixes possible oops in mtype_resize in ipset - ath11k: fix number of coding issues found by static analysis tools and spurious error messages Previous releases - regressions: - e1000e: re-enable s0ix power saving flows for systems with the Intel i219-LM Ethernet controllers to fix power use regression - virtio_net: fix recursive call to cpus_read_lock() to avoid a deadlock - ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst() - sysfs: take the rtnl lock around XPS configuration - xsk: fix memory leak for failed bind and rollback reservation at NETDEV_TX_BUSY - r8169: work around power-saving bug on some chip versions Previous releases - always broken: - dcb: validate netlink message in DCB handler - tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS to prevent unnecessary retries - vhost_net: fix ubuf refcount when sendmsg fails - bpf: save correct stopping point in file seq iteration - ncsi: use real net-device for response handler - neighbor: fix div by zero caused by a data race (TOCTOU) - bareudp: fix use of incorrect min_headroom size and a false positive lockdep splat from the TX lock - mvpp2: - clear force link UP during port init procedure in case bootloader had set it - add TCAM entry to drop flow control pause frames - fix PPPoE with ipv6 packet parsing - fix GoP Networking Complex Control config of port 3 - fix pkt coalescing IRQ-threshold configuration - xsk: fix race in SKB mode transmit with shared cq - ionic: account for vlan tag len in rx buffer len - stmmac: ignore the second clock input, current clock framework does not handle exclusive clock use well, other drivers may reconfigure the second clock Misc: - ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow existing scheme" * tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits) net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs net: lapb: Decrease the refcount of "struct lapb_cb" in lapb_device_event r8169: work around power-saving bug on some chip versions net: usb: qmi_wwan: add Quectel EM160R-GL selftests: mlxsw: Set headroom size of correct port net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag ibmvnic: fix: NULL pointer dereference. docs: networking: packet_mmap: fix old config reference docs: networking: packet_mmap: fix formatting for C macros vhost_net: fix ubuf refcount incorrectly when sendmsg fails bareudp: Fix use of incorrect min_headroom size bareudp: set NETIF_F_LLTX flag net: hdlc_ppp: Fix issues when mod_timer is called while timer is running atlantic: remove architecture depends erspan: fix version 1 check in gre_parse_header() net: hns: fix return value check in __lb_other_process() net: sched: prevent invalid Scell_log shift count net: neighbor: fix a crash caused by mod zero ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsLinus Torvalds authored
Pull AFS fixes from David Howells: "Two fixes. The first is the fix for the strnlen() array limit check and the second fixes the calculation of the number of dirent records used to represent any particular filename length" * tag 'afs-fixes-04012021' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Fix directory entry size calculation afs: Work around strnlen() oops with CONFIG_FORTIFIED_SOURCE=y
-
Linus Torvalds authored
Ever since commit 2a9127fc ("mm: rewrite wait_on_page_bit_common() logic") we've had some very occasional reports of BUG_ON(PageWriteback) in write_cache_pages(), which we thought we already fixed in commit 073861ed ("mm: fix VM_BUG_ON(PageTail) and BUG_ON(PageWriteback)"). But syzbot just reported another one, even with that commit in place. And it turns out that there's a simpler way to trigger the BUG_ON() than the one Hugh found with page re-use. It all boils down to the fact that the page writeback is ostensibly serialized by the page lock, but that isn't actually really true. Yes, the people _setting_ writeback all do so under the page lock, but the actual clearing of the bit - and waking up any waiters - happens without any page lock. This gives us this fairly simple race condition: CPU1 = end previous writeback CPU2 = start new writeback under page lock CPU3 = write_cache_pages() CPU1 CPU2 CPU3 ---- ---- ---- end_page_writeback() test_clear_page_writeback(page) ... delayed... lock_page(); set_page_writeback() unlock_page() lock_page() wait_on_page_writeback(); wake_up_page(page, PG_writeback); .. wakes up CPU3 .. BUG_ON(PageWriteback(page)); where the BUG_ON() happens because we woke up the PG_writeback bit becasue of the _previous_ writeback, but a new one had already been started because the clearing of the bit wasn't actually atomic wrt the actual wakeup or serialized by the page lock. The reason this didn't use to happen was that the old logic in waiting on a page bit would just loop if it ever saw the bit set again. The nice proper fix would probably be to get rid of the whole "wait for writeback to clear, and then set it" logic in the writeback path, and replace it with an atomic "wait-to-set" (ie the same as we have for page locking: we set the page lock bit with a single "lock_page()", not with "wait for lock bit to clear and then set it"). However, out current model for writeback is that the waiting for the writeback bit is done by the generic VFS code (ie write_cache_pages()), but the actual setting of the writeback bit is done much later by the filesystem ".writepages()" function. IOW, to make the writeback bit have that same kind of "wait-to-set" behavior as we have for page locking, we'd have to change our roughly ~50 different writeback functions. Painful. Instead, just make "wait_on_page_writeback()" loop on the very unlikely situation that the PG_writeback bit is still set, basically re-instating the old behavior. This is very non-optimal in case of contention, but since we only ever set the bit under the page lock, that situation is controlled. Reported-by: syzbot+2fc0712f8f8b8b8fa0ef@syzkaller.appspotmail.com Fixes: 2a9127fc ("mm: rewrite wait_on_page_bit_common() logic") Acked-by:
Hugh Dickins <hughd@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: stable@kernel.org Signed-off-by:
-
Dan Carpenter authored
This code will leak "map->debugfs_name" because the if statement is reversed so it only frees NULL pointers instead of non-NULL. In fact the if statement is not required and should just be removed because kfree() accepts NULL pointers. Fixes: cffa4b21 ("regmap: debugfs: Fix a memory leak when calling regmap_attach_dev") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X/RQpfAwRdLg0GqQ@mwandaSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 04 Jan, 2021 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Missing sanitization of rateest userspace string, bug has been triggered by syzbot, patch from Florian Westphal. 2) Report EOPNOTSUPP on missing set features in nft_dynset, otherwise error reporting to userspace via EINVAL is misleading since this is reserved for malformed netlink requests. 3) New binaries with old kernels might silently accept several set element expressions. New binaries set on the NFT_SET_EXPR and NFT_DYNSET_F_EXPR flags to request for several expressions per element, hence old kernels which do not support for this bail out with EOPNOTSUPP. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: netfilter: nftables: add set expression flags netfilter: nft_dynset: report EOPNOTSUPP on missing set feature netfilter: xt_RATEEST: reject non-null terminated string from userspace ==================== Link: https://lore.kernel.org/r/20210103192920.18639-1-pablo@netfilter.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Martin Blumenstingl says: ==================== net: dsa: lantiq_gswip: two fixes for -net/-stable While testing the lantiq_gswip driver in OpenWrt at least one board had a non-working Ethernet port connected to an internal 100Mbit/s PHY22F GPHY. The problem which could be observed: - the PHY would detect the link just fine - ethtool stats would see the TX counter rise - the RX counter in ethtool was stuck at zero It turns out that two independent patches are needed to fix this: - first we need to enable the MII data lines also for internal PHYs - second we need to program the GSWIP_MII_CFG registers for all ports except the CPU port These two patches have also been tested by back-porting them on top of Linux 5.4.86 in OpenWrt. Special thanks to Hauke for debugging and brainstorming this on IRC with me! ==================== Link: https://lore.kernel.org/r/20210103012544.3259029-1-martin.blumenstingl@googlemail.comSigned-off-by:
-
Martin Blumenstingl authored
There is one GSWIP_MII_CFG register for each switch-port except the CPU port. The register offset for the first port is 0x0, 0x02 for the second, 0x04 for the third and so on. Update the driver to not only restrict the GSWIP_MII_CFG registers to ports 0, 1 and 5. Handle ports 0..5 instead but skip the CPU port. This means we are not overwriting the configuration for the third port (port two since we start counting from zero) with the settings for the sixth port (with number five) anymore. The GSWIP_MII_PCDU(p) registers are not updated because there's really only three (one for each of the following ports: 0, 1, 5). Fixes: 14fceff4 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by:
Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Martin Blumenstingl authored
Enable GSWIP_MII_CFG_EN also for internal PHYs to make traffic flow. Without this the PHY link is detected properly and ethtool statistics for TX are increasing but there's no RX traffic coming in. Fixes: 14fceff4 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Suggested-by:
-
Xie He authored
In lapb_device_event, lapb_devtostruct is called to get a reference to an object of "struct lapb_cb". lapb_devtostruct increases the refcount of the object and returns a pointer to it. However, we didn't decrease the refcount after we finished using the pointer. This patch fixes this problem. Fixes: a4989fa9 ("net/lapb: support netdev events") Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by:
Xie He <xie.he.0141@gmail.com> Link: https://lore.kernel.org/r/20201231174331.64539-1-xie.he.0141@gmail.comSigned-off-by:
-
Heiner Kallweit authored
A user reported failing network with RTL8168dp (a quite rare chip version). Realtek confirmed that few chip versions suffer from a PLL power-down hw bug. Fixes: 07df5bd8 ("r8169: power down chip in probe") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/a1c39460-d533-7f9e-fa9d-2b8990b02426@gmail.comSigned-off-by:
-
Bjørn Mork authored
New modem using ff/ff/30 for QCDM, ff/00/00 for AT and NMEA, and ff/ff/ff for RMNET/QMI. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=2c7c ProdID=0620 Rev= 4.09 S: Manufacturer=Quectel S: Product=EM160R-GL S: SerialNumber=e31cedc1 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by:
Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20201230152451.245271-1-bjorn@mork.noSigned-off-by:
-
Ido Schimmel authored
The test was setting the headroom size of the wrong port. This was not visible because of a firmware bug that canceled this bug. Set the headroom size of the correct port, so that the test will pass with both old and new firmware versions. Fixes: bfa80478 ("selftests: mlxsw: Add a PFC test") Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20201230114251.394009-1-idosch@idosch.orgSigned-off-by:
-
Charles Keepax authored
A new flag MACB_CAPS_CLK_HW_CHG was added and all callers of macb_set_tx_clk were gated on the presence of this flag. - if (!clk) + if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG)) However the flag was not added to anything other than the new sama7g5_gem, turning that function call into a no op for all other systems. This breaks the networking on Zynq. The commit message adding this states: a new capability so that macb_set_tx_clock() to not be called for IPs having this capability This strongly implies that present of the flag was intended to skip the function not absence of the flag. Update the if statement to this effect, which repairs the existing users. Fixes: daafa1d3 ("net: macb: add capability to not set the clock rate") Suggested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by:
-
YANG LI authored
The error is due to dereference a null pointer in function reset_one_sub_crq_queue(): if (!scrq) { netdev_dbg(adapter->netdev, "Invalid scrq reset. irq (%d) or msgs(%p).\n", scrq->irq, scrq->msgs); return -EINVAL; } If the expression is true, scrq must be a null pointer and cannot dereference. Fixes: 9281cf2d ("ibmvnic: avoid memset null scrq msgs") Signed-off-by:YANG LI <abaci-bugfix@linux.alibaba.com> Reported-by:
Abaci <abaci@linux.alibaba.com> Acked-by:
Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/1609312994-121032-1-git-send-email-abaci-bugfix@linux.alibaba.comSigned-off-by:
-
Baruch Siach authored
Before commit 889b8f96 ("packet: Kill CONFIG_PACKET_MMAP.") there used to be a CONFIG_PACKET_MMAP config symbol that depended on CONFIG_PACKET. The text still implies that PACKET_MMAP can be disabled. Remove that from the text, as well as reference to old kernel versions. Also, drop reference to broken link to information for pre 2.6.5 kernels. Make a slight working improvement (s/In/On/) while at it. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Link: https://lore.kernel.org/r/80089f3783372c8fd7833f28ce774a171b2ef252.1609232919.git.baruch@tkos.co.ilSigned-off-by:
-
Baruch Siach authored
The citation of macro definitions should appear in a code block. Signed-off-by:
-
Yunjian Wang authored
Currently the vhost_zerocopy_callback() maybe be called to decrease the refcount when sendmsg fails in tun. The error handling in vhost handle_tx_zerocopy() will try to decrease the same refcount again. This is wrong. To fix this issue, we only call vhost_net_ubuf_put() when vq->heads[nvq->desc].len == VHOST_DMA_IN_PROGRESS. Fixes: bab632d6 ("vhost: vhost TX zero-copy support") Signed-off-by:
Yunjian Wang <wangyunjian@huawei.com> Acked-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/1609207308-20544-1-git-send-email-wangyunjian@huawei.comSigned-off-by:
-
Taehee Yoo authored
In the bareudp6_xmit_skb(), it calculates min_headroom. At that point, it uses struct iphdr, but it's not correct. So panic could occur. The struct ipv6hdr should be used. Test commands: ip netns add A ip netns add B ip link add veth0 netns A type veth peer name veth1 netns B ip netns exec A ip link set veth0 up ip netns exec A ip a a 2001:db8:0::1/64 dev veth0 ip netns exec B ip link set veth1 up ip netns exec B ip a a 2001:db8:0::2/64 dev veth1 for i in {10..1} do let A=$i-1 ip netns exec A ip link add bareudp$i type bareudp dstport $i \ ethertype 0x86dd ip netns exec A ip link set bareudp$i up ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev bareudp$i ip netns exec A ip -6 r a 2001:db8:$i::2 encap ip6 src \ 2001:db8:$A::1 dst 2001:db8:$A::2 via 2001:db8:$i::2 \ dev bareudp$i ip netns exec B ip link add bareudp$i type bareudp dstport $i \ ethertype 0x86dd ip netns exec B ip link set bareudp$i up ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev bareudp$i ip netns exec B ip -6 r a 2001:db8:$i::1 encap ip6 src \ 2001:db8:$A::2 dst 2001:db8:$A::1 via 2001:db8:$i::1 \ dev bareudp$i done ip netns exec A ping 2001:db8:7::2 Splat looks like: [ 66.436679][ C2] skbuff: skb_under_panic: text:ffffffff928614c8 len:454 put:14 head:ffff88810abb4000 data:ffff88810abb3ffa tail:0x1c0 end:0x3ec0 dev:veth0 [ 66.441626][ C2] ------------[ cut here ]------------ [ 66.443458][ C2] kernel BUG at net/core/skbuff.c:109! [ 66.445313][ C2] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 66.447606][ C2] CPU: 2 PID: 913 Comm: ping Not tainted 5.10.0+ #819 [ 66.450251][ C2] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 66.453713][ C2] RIP: 0010:skb_panic+0x15d/0x15f [ 66.455345][ C2] Code: 98 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 60 8b 78 93 41 57 41 56 41 55 48 8b 54 24 20 48 8b 74 24 28 e8 b5 40 f9 ff <0f> 0b 48 8b 6c 24 20 89 34 24 e8 08 c9 98 fe 8b 34 24 48 c7 c1 80 [ 66.462314][ C2] RSP: 0018:ffff888119209648 EFLAGS: 00010286 [ 66.464281][ C2] RAX: 0000000000000089 RBX: ffff888003159000 RCX: 0000000000000000 [ 66.467216][ C2] RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed10232412c0 [ 66.469768][ C2] RBP: ffff88810a53d440 R08: ffffed102328018d R09: ffffed102328018d [ 66.472297][ C2] R10: ffff888119400c67 R11: ffffed102328018c R12: 000000000000000e [ 66.474833][ C2] R13: ffff88810abb3ffa R14: 00000000000001c0 R15: 0000000000003ec0 [ 66.477361][ C2] FS: 00007f37c0c72f00(0000) GS:ffff888119200000(0000) knlGS:0000000000000000 [ 66.480214][ C2] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 66.482296][ C2] CR2: 000055a058808570 CR3: 000000011039e002 CR4: 00000000003706e0 [ 66.484811][ C2] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 66.487793][ C2] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 66.490424][ C2] Call Trace: [ 66.491469][ C2] <IRQ> [ 66.492374][ C2] ? eth_header+0x28/0x190 [ 66.494054][ C2] ? eth_header+0x28/0x190 [ 66.495401][ C2] skb_push.cold.99+0x22/0x22 [ 66.496700][ C2] eth_header+0x28/0x190 [ 66.497867][ C2] neigh_resolve_output+0x3de/0x720 [ 66.499615][ C2] ? __neigh_update+0x7e8/0x20a0 [ 66.501176][ C2] __neigh_update+0x8bd/0x20a0 [ 66.502749][ C2] ndisc_update+0x34/0xc0 [ 66.504010][ C2] ndisc_recv_na+0x8da/0xb80 [ 66.505041][ C2] ? pndisc_redo+0x20/0x20 [ 66.505888][ C2] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 66.506965][ C2] ndisc_rcv+0x3a0/0x470 [ 66.507797][ C2] icmpv6_rcv+0xad9/0x1b00 [ 66.508645][ C2] ip6_protocol_deliver_rcu+0xcd6/0x1560 [ 66.509719][ C2] ip6_input_finish+0x5b/0xf0 [ 66.510615][ C2] ip6_input+0xcd/0x2d0 [ 66.511406][ C2] ? ip6_input_finish+0xf0/0xf0 [ 66.512327][ C2] ? rcu_read_lock_held+0x91/0xa0 [ 66.513279][ C2] ? ip6_protocol_deliver_rcu+0x1560/0x1560 [ 66.514414][ C2] ipv6_rcv+0xe8/0x300 [ ... ] Acked-by:Guillaume Nault <gnault@redhat.com> Fixes: 571912c6 ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20201228152146.24270-1-ap420073@gmail.comSigned-off-by:
-
Taehee Yoo authored
Like other tunneling interfaces, the bareudp doesn't need TXLOCK. So, It is good to set the NETIF_F_LLTX flag to improve performance and to avoid lockdep's false-positive warning. Test commands: ip netns add A ip netns add B ip link add veth0 netns A type veth peer name veth1 netns B ip netns exec A ip link set veth0 up ip netns exec A ip a a 10.0.0.1/24 dev veth0 ip netns exec B ip link set veth1 up ip netns exec B ip a a 10.0.0.2/24 dev veth1 for i in {2..1} do let A=$i-1 ip netns exec A ip link add bareudp$i type bareudp \ dstport $i ethertype ip ip netns exec A ip link set bareudp$i up ip netns exec A ip a a 10.0.$i.1/24 dev bareudp$i ip netns exec A ip r a 10.0.$i.2 encap ip src 10.0.$A.1 \ dst 10.0.$A.2 via 10.0.$i.2 dev bareudp$i ip netns exec B ip link add bareudp$i type bareudp \ dstport $i ethertype ip ip netns exec B ip link set bareudp$i up ip netns exec B ip a a 10.0.$i.2/24 dev bareudp$i ip netns exec B ip r a 10.0.$i.1 encap ip src 10.0.$A.2 \ dst 10.0.$A.1 via 10.0.$i.1 dev bareudp$i done ip netns exec A ping 10.0.2.2 Splat looks like: [ 96.992803][ T822] ============================================ [ 96.993954][ T822] WARNING: possible recursive locking detected [ 96.995102][ T822] 5.10.0+ #819 Not tainted [ 96.995927][ T822] -------------------------------------------- [ 96.997091][ T822] ping/822 is trying to acquire lock: [ 96.998083][ T822] ffff88810f753898 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 96.999813][ T822] [ 96.999813][ T822] but task is already holding lock: [ 97.001192][ T822] ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 97.002908][ T822] [ 97.002908][ T822] other info that might help us debug this: [ 97.004401][ T822] Possible unsafe locking scenario: [ 97.004401][ T822] [ 97.005784][ T822] CPU0 [ 97.006407][ T822] ---- [ 97.007010][ T822] lock(_xmit_NONE#2); [ 97.007779][ T822] lock(_xmit_NONE#2); [ 97.008550][ T822] [ 97.008550][ T822] *** DEADLOCK *** [ 97.008550][ T822] [ 97.010057][ T822] May be due to missing lock nesting notation [ 97.010057][ T822] [ 97.011594][ T822] 7 locks held by ping/822: [ 97.012426][ T822] #0: ffff888109a144f0 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x12f7/0x2b00 [ 97.014191][ T822] #1: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020 [ 97.016045][ T822] #2: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960 [ 97.017897][ T822] #3: ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 97.019684][ T822] #4: ffffffffbce2f600 (rcu_read_lock){....}-{1:2}, at: bareudp_xmit+0x31b/0x3690 [bareudp] [ 97.021573][ T822] #5: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020 [ 97.023424][ T822] #6: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960 [ 97.025259][ T822] [ 97.025259][ T822] stack backtrace: [ 97.026349][ T822] CPU: 3 PID: 822 Comm: ping Not tainted 5.10.0+ #819 [ 97.027609][ T822] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 97.029407][ T822] Call Trace: [ 97.030015][ T822] dump_stack+0x99/0xcb [ 97.030783][ T822] __lock_acquire.cold.77+0x149/0x3a9 [ 97.031773][ T822] ? stack_trace_save+0x81/0xa0 [ 97.032661][ T822] ? register_lock_class+0x1910/0x1910 [ 97.033673][ T822] ? register_lock_class+0x1910/0x1910 [ 97.034679][ T822] ? rcu_read_lock_sched_held+0x91/0xc0 [ 97.035697][ T822] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 97.036690][ T822] lock_acquire+0x1b2/0x730 [ 97.037515][ T822] ? __dev_queue_xmit+0x1f52/0x2960 [ 97.038466][ T822] ? check_flags+0x50/0x50 [ 97.039277][ T822] ? netif_skb_features+0x296/0x9c0 [ 97.040226][ T822] ? validate_xmit_skb+0x29/0xb10 [ 97.041151][ T822] _raw_spin_lock+0x30/0x70 [ 97.041977][ T822] ? __dev_queue_xmit+0x1f52/0x2960 [ 97.042927][ T822] __dev_queue_xmit+0x1f52/0x2960 [ 97.043852][ T822] ? netdev_core_pick_tx+0x290/0x290 [ 97.044824][ T822] ? mark_held_locks+0xb7/0x120 [ 97.045712][ T822] ? lockdep_hardirqs_on_prepare+0x12c/0x3e0 [ 97.046824][ T822] ? __local_bh_enable_ip+0xa5/0xf0 [ 97.047771][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.048710][ T822] ? trace_hardirqs_on+0x41/0x120 [ 97.049626][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.050556][ T822] ? __local_bh_enable_ip+0xa5/0xf0 [ 97.051509][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.052443][ T822] ? check_chain_key+0x244/0x5f0 [ 97.053352][ T822] ? rcu_read_lock_bh_held+0x56/0xa0 [ 97.054317][ T822] ? ip_finish_output2+0x6ea/0x2020 [ 97.055263][ T822] ? pneigh_lookup+0x410/0x410 [ 97.056135][ T822] ip_finish_output2+0x6ea/0x2020 [ ... ] Acked-by:
-
