- 09 Sep, 2010 3 commits
-
-
Ingo Molnar authored
Merge reason: Pick up pending fixes before applying dependent new changes. Signed-off-by:Ingo Molnar <mingo@elte.hu>
-
Peter Zijlstra authored
Since we have UP_PREPARE, we should also have UP_CANCELED. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> LKML-Reference: <new-submission> Signed-off-by:
-
Li Zefan authored
Commit 1c024eca (perf, trace: Optimize tracepoints by using per-tracepoint-per-cpu hlist to track events) caused a module refcount leak. Reported-And-Tested-by:
Avi Kivity <avi@redhat.com> Signed-off-by:
-
- 08 Sep, 2010 6 commits
-
-
Masami Hiramatsu authored
Check the argument name whether it is invalid (not C-like symbol name). This makes event format simple. Reported-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> LKML-Reference: <20100827113912.22882.62313.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Masami Hiramatsu authored
Set "argN" name for each argument automatically if it has no specified name. Since dynamic trace event(kprobe_events) accepts special characters for its argument, its format can show those special characters (e.g. '$', '%', '+'). However, perf can't parse those format because of the character (especially '%') mess up the format. This sets "argX" name for those arguments if user omitted the argument names. E.g. # echo 'p do_fork %ax IP=%ip $stack' > tracing/kprobe_events # cat tracing/kprobe_events p:kprobes/p_do_fork_0 do_fork arg1=%ax IP=%ip arg3=$stack Reported-by:
-
Masami Hiramatsu authored
Don't make argument names from raw parameters (means the parameters are written in kprobe-tracer syntax), because the argument syntax may include special characters. Just leave it, then kprobe-tracer gives a new name. Reported-by:
-
Masami Hiramatsu authored
Fix a bug to support %return probe syntax again. Previous commit 4235b045 has a bug which disables the %return syntax on perf probe. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100827113852.22882.87447.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by:
-
Masami Hiramatsu authored
Fix a memory leak which happens when a field name conflicts with others. In error case, free_trace_probe() will free all arguments until nr_args, so this increments nr_args the begining of the loop instead of the end. Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> LKML-Reference: <20100827113846.22882.12670.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by:
-
Steven Rostedt authored
Reading the file set_ftrace_filter does three things. 1) shows whether or not filters are set for the function tracer 2) shows what functions are set for the function tracer 3) shows what triggers are set on any functions 3 is independent from 1 and 2. The way this file currently works is that it is a state machine, and as you read it, it may change state. But this assumption breaks when you use lseek() on the file. The state machine gets out of sync and the t_show() may use the wrong pointer and cause a kernel oops. Luckily, this will only kill the app that does the lseek, but the app dies while holding a mutex. This prevents anyone else from using the set_ftrace_filter file (or any other function tracing file for that matter). A real fix for this is to rewrite the code, but that is too much for a -rc release or stable. This patch simply disables llseek on the set_ftrace_filter() file for now, and we can do the proper fix for the next major release. Reported-by:
Robert Swiecki <swiecki@google.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Tavis Ormandy <taviso@google.com> Cc: Eugene Teo <eugene@redhat.com> Cc: vendor-sec@lst.de Cc: <stable@kernel.org> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
- 07 Sep, 2010 5 commits
-
-
Koki Sanagi authored
Add a perf script which shows packets processing and processed time. It helps us to investigate networking or network devices. If you want to use it, install perf and record perf.data like following. If you set script, perf gathers records until it ends. If not, you must Ctrl-C to stop recording. And if you want a report from record, If you use some options, you can limit the output. Option is below. tx: show only tx packets processing rx: show only rx packets processing dev=: show processing on this device debug: work with debug mode. It shows buffer status. For example, if you want to show received packets processing associated with eth4, 106133.171439sec cpu=0 irq_entry(+0.000msec irq=24:eth4) | softirq_entry(+0.006msec) | |---netif_receive_skb(+0.010msec skb=f2d15900 len=100) | | | skb_copy_datagram_iovec(+0.039msec 10291::10291) | napi_poll_exit(+0.022msec eth4) This perf script helps us to analyze the processing time of a transmit/receive sequence. Signed-off-by:Koki Sanagi <sanagi.koki@jp.fujitsu.com> Acked-by:
David S. Miller <davem@davemloft.net> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Kaneshige Kenji <kaneshige.kenji@jp.fujitsu.com> Cc: Izumo Taku <izumi.taku@jp.fujitsu.com> Cc: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Scott Mcmillan <scott.a.mcmillan@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4C72439D.3040001@jp.fujitsu.com> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com>
-
Koki Sanagi authored
This patch adds tracepoint to consume_skb and add trace_kfree_skb before __kfree_skb in skb_free_datagram_locked and net_tx_action. Combinating with tracepoint on dev_hard_start_xmit, we can check how long it takes to free transmitted packets. And using it, we can calculate how many packets driver had at that time. It is useful when a drop of transmitted packet is a problem. sshd-6828 [000] 112689.258154: consume_skb: skbaddr=f2d99bb8 Signed-off-by:Neil Horman <nhorman@tuxdriver.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Kaneshige Kenji <kaneshige.kenji@jp.fujitsu.com> Cc: Izumo Taku <izumi.taku@jp.fujitsu.com> Cc: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Scott Mcmillan <scott.a.mcmillan@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> LKML-Reference: <4C724364.50903@jp.fujitsu.com> Signed-off-by:
-
Koki Sanagi authored
This patch adds tracepoint to dev_queue_xmit, dev_hard_start_xmit, netif_rx and netif_receive_skb. These tracepoints help you to monitor network driver's input/output. <idle>-0 [001] 112447.902030: netif_rx: dev=eth1 skbaddr=f3ef0900 len=84 <idle>-0 [001] 112447.902039: netif_receive_skb: dev=eth1 skbaddr=f3ef0900 len=84 sshd-6828 [000] 112447.903257: net_dev_queue: dev=eth4 skbaddr=f3fca538 len=226 sshd-6828 [000] 112447.903260: net_dev_xmit: dev=eth4 skbaddr=f3fca538 len=226 rc=0 Signed-off-by: -
Neil Horman authored
This patch converts trace_napi_poll from DECLARE_EVENT to TRACE_EVENT to improve the usability of napi_poll tracepoint. <idle>-0 [001] 241302.750777: napi_poll: napi poll on napi struct f6acc480 for device eth3 <idle>-0 [000] 241302.852389: napi_poll: napi poll on napi struct f5d0d70c for device eth1 The original patch is below: http://marc.info/?l=linux-kernel&m=126021713809450&w=2 [ sanagi.koki@jp.fujitsu.com: And add a fix by Steven Rostedt: http://marc.info/?l=linux-kernel&m=126150506519173&w=2 ] Signed-off-by: -
Lai Jiangshan authored
Add a tracepoint for tracing when softirq action is raised. This and the existing tracepoints complete softirq's tracepoints: softirq_raise, softirq_entry and softirq_exit. And when this tracepoint is used in combination with the softirq_entry tracepoint we can determine the softirq raise latency. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by:
-
- 03 Sep, 2010 3 commits
-
-
Robert Richter authored
When the PMU is enabled it is valid to have unhandled nmis, two events could trigger 'simultaneously' raising two back-to-back NMIs. If the first NMI handles both, the latter will be empty and daze the CPU. The solution to avoid an 'unknown nmi' massage in this case was simply to stop the nmi handler chain when the PMU is enabled by stating the nmi was handled. This has the drawback that a) we can not detect unknown nmis anymore, and b) subsequent nmi handlers are not called. This patch addresses this. Now, we check this unknown NMI if it could be a PMU back-to-back NMI. Otherwise we pass it and let the kernel handle the unknown nmi. This is a debug log: cpu #6, nmi #32333, skip_nmi #32330, handled = 1, time = 1934364430 cpu #6, nmi #32334, skip_nmi #32330, handled = 1, time = 1934704616 cpu #6, nmi #32335, skip_nmi #32336, handled = 2, time = 1936032320 cpu #6, nmi #32336, skip_nmi #32336, handled = 0, time = 1936034139 cpu #6, nmi #32337, skip_nmi #32336, handled = 1, time = 1936120100 cpu #6, nmi #32338, skip_nmi #32336, handled = 1, time = 1936404607 cpu #6, nmi #32339, skip_nmi #32336, handled = 1, time = 1937983416 cpu #6, nmi #32340, skip_nmi #32341, handled = 2, time = 1938201032 cpu #6, nmi #32341, skip_nmi #32341, handled = 0, time = 1938202830 cpu #6, nmi #32342, skip_nmi #32341, handled = 1, time = 1938443743 cpu #6, nmi #32343, skip_nmi #32341, handled = 1, time = 1939956552 cpu #6, nmi #32344, skip_nmi #32341, handled = 1, time = 1940073224 cpu #6, nmi #32345, skip_nmi #32341, handled = 1, time = 1940485677 cpu #6, nmi #32346, skip_nmi #32347, handled = 2, time = 1941947772 cpu #6, nmi #32347, skip_nmi #32347, handled = 1, time = 1941949818 cpu #6, nmi #32348, skip_nmi #32347, handled = 0, time = 1941951591 Uhhuh. NMI received for unknown reason 00 on CPU 6. Do you have a strange power saving mode enabled? Dazed and confused, but trying to continue Deltas: nmi #32334 340186 nmi #32335 1327704 nmi #32336 1819 <<<< back-to-back nmi [1] nmi #32337 85961 nmi #32338 284507 nmi #32339 1578809 nmi #32340 217616 nmi #32341 1798 <<<< back-to-back nmi [2] nmi #32342 240913 nmi #32343 1512809 nmi #32344 116672 nmi #32345 412453 nmi #32346 1462095 <<<< 1st nmi (standard) handling 2 counters nmi #32347 2046 <<<< 2nd nmi (back-to-back) handling one counter nmi #32348 1773 <<<< 3rd nmi (back-to-back) handling no counter! [3] For back-to-back nmi detection there are the following rules: The PMU nmi handler was handling more than one counter and no counter was handled in the subsequent nmi (see [1] and [2] above). There is another case if there are two subsequent back-to-back nmis [3]. The 2nd is detected as back-to-back because the first handled more than one counter. If the second handles one counter and the 3rd handles nothing, we drop the 3rd nmi because it could be a back-to-back nmi. Signed-off-by:
Robert Richter <robert.richter@amd.com> Signed-off-by:
Don Zickus <dzickus@redhat.com> Cc: peterz@infradead.org Cc: gorcunov@gmail.com Cc: fweisbec@gmail.com Cc: ying.huang@intel.com Cc: ming.m.lin@intel.com Cc: eranian@google.com LKML-Reference: <1283454469-1909-3-git-send-email-dzickus@redhat.com> Signed-off-by:
-
Peter Zijlstra authored
Now that we rely on the number of handled overflows, ensure all handle_irq implementations actually return the right number. Signed-off-by:
-
Don Zickus authored
During testing of a patch to stop having the perf subsytem swallow nmis, it was uncovered that Nehalem boxes were randomly getting unknown nmis when using the perf tool. Moving the ack'ing of the PMI closer to when we get the status allows the hardware to properly re-set the PMU bit signaling another PMI was triggered during the processing of the first PMI. This allows the new logic for dealing with the shortcomings of multiple PMIs to handle the extra NMI by 'eat'ing it later. Now one can wonder why are we getting a second PMI when we disable all the PMUs in the begining of the NMI handler to prevent such a case, for that I do not know. But I know the fix below helps deal with this quirk. Tested on multiple Nehalems where the problem was occuring. With the patch, the code now loops a second time to handle the second PMI (whereas before it was not). Signed-off-by:
-
- 01 Sep, 2010 7 commits
-
-
Ingo Molnar authored
Merge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent
-
Robert Richter authored
The use of the return value of init_sysfs() with commit 10f0412f oprofile, x86: fix init_sysfs error handling discovered the following build error for !CONFIG_PM: .../linux/arch/x86/oprofile/nmi_int.c: In function ‘op_nmi_init’: .../linux/arch/x86/oprofile/nmi_int.c:784: error: expected expression before ‘do’ make[2]: *** [arch/x86/oprofile/nmi_int.o] Error 1 make[1]: *** [arch/x86/oprofile] Error 2 This patch fixes this. Reported-by:
-
Steven Rostedt authored
While discussing the strictness of the 80 character limit on the Kernel Summit Discussion mailing list, I showed examples that I broke that limit slightly with some algorithms. In discussing with John Linville, what looked better, I realized that two of the 80 char breaking culprits were an identical expression. As a clean up, this patch moves the identical expression into its own helper function and that is used instead. As a side effect, the offending code is now under the 80 character limit. :-) This clean up code also changes the expression from (A - B) - C to A - (B + C) This makes the code look a little nicer too. Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: -
Don Zickus authored
During my rewrite, the semantics of touch_nmi_watchdog and touch_softlockup_watchdog changed enough to break some drivers (mostly over preemptable regions). These are cases where long delays on one CPU (due to print_delay for example) can cause long delays on other CPUs - so we must 'touch' the nmi_watchdog flag of those other CPUs as well. This change brings those touch_*_watchdog() functions back in line with to how they used to work. Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Cc: peterz@infradead.org Cc: fweisbec@gmail.com LKML-Reference: <1283310009-22168-2-git-send-email-dzickus@redhat.com> Signed-off-by:
-
Cyrill Gorcunov authored
Implements verification of - Bits of ESCR EventMask field (meaningful bits in field are hardware predefined and others bits should be set to zero) - INSTR_COMPLETED event (it is available on predefined cpu model only) - Thread shared events (they should be guarded by "perf_event_paranoid" sysctl due to security reason). The side effect of this action is that PERF_COUNT_HW_BUS_CYCLES become a "paranoid" general event. Signed-off-by:
Lin Ming <ming.m.lin@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100825182334.GB14874@lenovo> Signed-off-by:
-
Akinobu Mita authored
The panic notifer in lockup_detector just set did_panic to 1. But did_panic is not used anywhere so we can just remove it. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: peterz@infradead.org Cc: gorcunov@gmail.com Cc: fweisbec@gmail.com LKML-Reference: <1283310009-22168-4-git-send-email-dzickus@redhat.com> Signed-off-by:
-
Akinobu Mita authored
By the commit e6bde73b ("cpu-hotplug: return better errno on cpu hotplug failure"), the cpu notifier can return encapsulate errno value, resulting in more meaningful error codes for CPU hotplug failures. This converts the cpu notifier to return encapsulate errno value for the lockup_detector as well. Signed-off-by:
-
- 31 Aug, 2010 3 commits
-
-
Li Zefan authored
While we are reading trace_stat/functionX and someone just disabled function_profile at that time, we can trigger this: divide error: 0000 [#1] PREEMPT SMP ... EIP is at function_stat_show+0x90/0x230 ... This fix just takes the ftrace_profile_lock and checks if rec->counter is 0. If it's 0, we know the profile buffer has been reset. Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Cc: stable@kernel.org LKML-Reference: <4C723644.4040708@cn.fujitsu.com> Signed-off-by:
-
Steven Rostedt authored
When CONFIG_IRQSOFF_TRACER is set and CONFIG_PROVE_LOCKING is not, we get the following error: $ make oldconfig scripts/kconfig/conf --oldconfig arch/x86/Kconfig warning: (IRQSOFF_TRACER && TRACING_SUPPORT && FTRACE && TRACE_IRQFLAGS_SUPPORT && !ARCH_USES_GETTIMEOFFSET) selects TRACE_IRQFLAGS which has unmet direct dependencies (DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && PROVE_LOCKING) warning: (IRQSOFF_TRACER && TRACING_SUPPORT && FTRACE && TRACE_IRQFLAGS_SUPPORT && !ARCH_USES_GETTIMEOFFSET) selects TRACE_IRQFLAGS which has unmet direct dependencies (DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && PROVE_LOCKING) This is because IRQSOFF_TRACER selects TRACE_IRQFLAGS but TRACE_IRQFLAGS has PROVE_LOCKING as a dependency. This code is incorrect, and this patch changes the TRACE_IRQFLAGS to be just a simple bool that does not depend or select anything. Instead both IRQSOFF_TRACER and PROVE_LOCKING select it. Reported-by:
Richard Kennedy <richard@rsk.demon.co.uk> Signed-off-by:
-
Robert Richter authored
On failure init_sysfs() might not properly free resources. The error code of the function is not checked. And, when reinitializing the exit function might be called twice. This patch fixes all this. Cc: stable@kernel.org Signed-off-by:
-
- 30 Aug, 2010 2 commits
-
-
Stephane Eranian authored
Per-thread events with a cpu filter, i.e., cpu != -1, were not reporting correct timings when the thread never ran on the monitored cpu. The time enabled was reported as a negative value. This patch fixes the problem by updating tstamp_stopped, tstamp_running in event_sched_out() for events with filters and which are marked as INACTIVE. The function group_sched_out() is modified to systematically call into event_sched_out() to avoid duplicating the timing adjustment code twice. With the patch, I now get: $ task_cpu -i -e unhalted_core_cycles,unhalted_core_cycles noploop 2 noploop for 2 seconds CPU0 0 unhalted_core_cycles (ena=1,991,136,594, run=0) CPU0 0 unhalted_core_cycles (ena=1,991,136,594, run=0) CPU1 0 unhalted_core_cycles (ena=1,991,136,594, run=0) CPU1 0 unhalted_core_cycles (ena=1,991,136,594, run=0) CPU2 0 unhalted_core_cycles (ena=1,991,136,594, run=0) CPU2 0 unhalted_core_cycles (ena=1,991,136,594, run=0) CPU3 4,747,990,931 unhalted_core_cycles (ena=1,991,136,594, run=1,991,136,594) CPU3 4,747,990,931 unhalted_core_cycles (ena=1,991,136,594, run=1,991,136,594) Signed-off-by:
Stephane Eranian <eranian@gmail.com> Acked-by:
-
Ingo Molnar authored
Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/core
-
- 27 Aug, 2010 1 commit
-
-
Frederic Weisbecker authored
Conflicts: tools/perf/util/callchain.h Merge reason: Fix a non-trivial conflict with latest fixes
-
- 26 Aug, 2010 1 commit
-
-
Frederic Weisbecker authored
Each histogram entry has a callchain root that stores the callchain samples. However we forgot to initialize the tracking of children hits of these roots, which then got random values on their creation. The root children hits is multiplied by the minimum percentage of hits provided by the user, and the result becomes the minimum hits expected from children branches. If the random value due to the uninitialization is big enough, then this minimum number of hits can be huge and eventually filter every children branches. The end result was invisible callchains. All we need to fix this is to initialize the children hits of the root. Reported-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
-
- 25 Aug, 2010 9 commits
-
-
Tom Zanussi authored
External shared libraries should never be appended to the LDFLAGS as this messes the linking order. As EXTLIBS collects those libraries, it seems that perl and python libraries should also be appended to EXTLIBS. Also fix the broken linking order. This is a refresh of a patch by Ozan Çağlayan and improved by both Tom Zanussi and Kirill A. Shutemov. Cc: Ozan Çağlayan <ozan@pardus.org.tr> Tested-by:
Kirill A. Shutemov <kirill@shutemov.name> Tested-by:
Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <1282627430.28324.8.camel@tropicana> Signed-off-by:
-
Srikar Dronamraju authored
Given a dso, list the symbols in ascending name order. Needed for listing available symbols from perf probe. Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Mark Wielaard <mjw@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Naren A Devaiah <naren.devaiah@in.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <20100825134329.5447.92261.sendpatchset@localhost6.localdomain6> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
When looking at a callchains enabled perf data file one can find it tiresome to start with all callchains collapsed and then to have to go one by one expanding them. So associate 'E' with "Expand all callchains" and 'C' with "Collapse all callchains". This way now one can have the top level view and then switch to/from having all callchains expanded. More work is needed to allow expanding just from one branch down to its leaves. Reported-by:
-
Arnaldo Carvalho de Melo authored
Not everytime we show the callchains, removing duplicated initialization of this field. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <new-submission> Signed-off-by: -
Arnaldo Carvalho de Melo authored
Its way too stupid to use rb_first() for just caching if there are children, use the cheaper RB_EMPTY_ROOT() instead. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <new-submission> Signed-off-by: -
Arnaldo Carvalho de Melo authored
It wasn't setting the ms.has_children for the hist_entry itself, just for the callchain Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <new-submission> Signed-off-by: -
Lin Ming authored
If on Pentium4 CPUs the FORCE_OVF flag is set then an NMI happens on every event, which can generate a flood of NMIs. Clear it. Reported-by:
Vince Weaver <vweaver1@eecs.utk.edu> Signed-off-by:
-
Ingo Molnar authored
Merge reason: pick up perf fixes Signed-off-by: -
Lin Ming authored
This fixes the following build warning introduced by the callchain rework: arch/x86/kernel/cpu/perf_event.c:1574: warning: ‘perf_callchain_entry_nmi’ defined but not used Signed-off-by:
-
