Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

s3c24xx_irq_syscore_ops was only defined for s3c2410 cpus leading
to compile errors on for example 2412 and 2416.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

s3c2410_dma_chan is not a type itself, so struct is required.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

There's no place to use these functions.
and actually no need to set the platform data.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Remove compiler warning when no CONFIG_PM

arch/arm/mach-exynos4/time.c:209:
        warning: 'exynos4_pwm4_resume' defined but not used
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Added Kconfig entry for setup-usb-phy.c on which EHCI support
is dependent on.

Following the naming convention of other setup files, we have
following renaming.
	usb-phy.c ==> setup-usb-phy.c
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Basically, other S3C SoCs and S5PC100 use 'S3C_VA_USB_HSPHY'
commonly. It should be changed to 'S3C_VA_USB_HSPHY' for common
usage and others. Now happens build error on S5PC100.

Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Changed the SPI platform device name from S5P6450 to S5P64x0 as it is
defined common for both S5p6440 and S5P6450 in dev-spi.c of S5P64x0.
Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

.. except there are various scripts that really know that there are
three numbers, so it calls itself "3.0.0-rc1".

Hopefully by the time the final 3.0 is out, we'll have that extra zero
all figured out.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
  eCryptfs: Remove ecryptfs_header_cache_2
  eCryptfs: Cleanup and optimize ecryptfs_lookup_interpose()
  eCryptfs: Return useful code from contains_ecryptfs_marker
  eCryptfs: Fix new inode race condition
  eCryptfs: Cleanup inode initialization code
  eCryptfs: Consolidate inode functions into inode.c

* 'pnfs-submit' of git://git.open-osd.org/linux-open-osd: (32 commits)
  pnfs-obj: pg_test check for max_io_size
  NFSv4.1: define nfs_generic_pg_test
  NFSv4.1: use pnfs_generic_pg_test directly by layout driver
  NFSv4.1: change pg_test return type to bool
  NFSv4.1: unify pnfs_pageio_init functions
  pnfs-obj: objlayout_encode_layoutcommit implementation
  pnfs: encode_layoutcommit
  pnfs-obj: report errors and .encode_layoutreturn Implementation.
  pnfs: encode_layoutreturn
  pnfs: layoutret_on_setattr
  pnfs: layoutreturn
  pnfs-obj: osd raid engine read/write implementation
  pnfs: support for non-rpc layout drivers
  pnfs-obj: define per-inode private structure
  pnfs: alloc and free layout_hdr layoutdriver methods
  pnfs-obj: objio_osd device information retrieval and caching
  pnfs-obj: decode layout, alloc/free lseg
  pnfs-obj: pnfs_osd XDR client implementation
  pnfs-obj: pnfs_osd XDR definitions
  pnfs-obj: objlayoutdriver module skeleton
  ...

We had a few drivers move from arch/arm into drivers/gpio, but they
don't actually compile without the ARM platform headers etc.  As a
result they were messing up allyesconfig on x86.

Make them depend on ARM.
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now that ecryptfs_lookup_interpose() is no longer using
ecryptfs_header_cache_2 to read in metadata, the kmem_cache can be
removed and the ecryptfs_header_cache_1 kmem_cache can be renamed to
ecryptfs_header_cache.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>

ecryptfs_lookup_interpose() has turned into spaghetti code over the
years. This is an effort to clean it up.

 - Shorten overly descriptive variable names such as ecryptfs_dentry
 - Simplify gotos and error paths
 - Create helper function for reading plaintext i_size from metadata

It also includes an optimization when reading i_size from the metadata.
A complete page-sized kmem_cache_alloc() was being done to read in 16
bytes of metadata. The buffer for that is now statically declared.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>

Instead of having the calling functions translate the true/false return
code to either 0 or -EINVAL, have contains_ecryptfs_marker() return 0 or
-EINVAL so that the calling functions can just reuse the return code.

Also, rename the function to ecryptfs_validate_marker() to avoid callers
mistakenly thinking that it returns true/false codes.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>

Only unlock and d_add() new inodes after the plaintext inode size has
been read from the lower filesystem. This fixes a race condition that
was sometimes seen during a multi-job kernel build in an eCryptfs mount.

https://bugzilla.kernel.org/show_bug.cgi?id=36002Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Reported-by: David <david@unsolicited.net>
Tested-by: David <david@unsolicited.net>

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (43 commits)
  acer-wmi: support integer return type from WMI methods
  msi-laptop: fix section mismatch in reference from the function load_scm_model_init
  acer-wmi: support to set communication device state by new wmid method
  acer-wmi: allow 64-bits return buffer from WMI methods
  acer-wmi: check the existence of internal 3G device when set capability
  platform/x86:delete two unused variables
  support wlan hotkey on Acer Travelmate 5735Z
  platform-x86: intel_mid_thermal: Fix memory leak
  platform/x86: Fix Makefile for intel_mid_powerbtn
  platform/x86: Simplify intel_mid_powerbtn
  acer-wmi: Delete out-of-date documentation
  acerhdf: Clean up includes
  acerhdf: Drop pointless dependency on THERMAL_HWMON
  acer-wmi: Update MAINTAINERS
  wmi: Orphan ACPI-WMI driver
  tc1100-wmi: Orphan driver
  acer-wmi: does not allow negative number set to initial device state
  platform/oaktrail: ACPI EC Extra driver for Oaktrail
  thinkpad_acpi: Convert printks to pr_<level>
  thinkpad_acpi: Correct !CONFIG_THINKPAD_ACPI_VIDEO warning
  ...

Thomas Gleixner reports that we now have a boot crash triggered by
CONFIG_CPUMASK_OFFSTACK=y:

    BUG: unable to handle kernel NULL pointer dereference at   (null)
    IP: [<c11ae035>] find_next_bit+0x55/0xb0
    Call Trace:
     [<c11addda>] cpumask_any_but+0x2a/0x70
     [<c102396b>] flush_tlb_mm+0x2b/0x80
     [<c1022705>] pud_populate+0x35/0x50
     [<c10227ba>] pgd_alloc+0x9a/0xf0
     [<c103a3fc>] mm_init+0xec/0x120
     [<c103a7a3>] mm_alloc+0x53/0xd0

which was introduced by commit de03c72c ("mm: convert
mm->cpu_vm_cpumask into cpumask_var_t"), and is due to wrong ordering of
mm_init() vs mm_init_cpumask

Thomas wrote a patch to just fix the ordering of initialization, but I
hate the new double allocation in the fork path, so I ended up instead
doing some more radical surgery to clean it all up.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] mm: fix mmu_gather rework
  [S390] mm: fix storage key handling

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: more /proc and /sys file support

* 'for-2.6.40' of git://linux-nfs.org/~bfields/linux: (22 commits)
  nfsd: make local functions static
  NFSD: Remove unused variable from nfsd4_decode_bind_conn_to_session()
  NFSD: Check status from nfsd4_map_bcts_dir()
  NFSD: Remove setting unused variable in nfsd_vfs_read()
  nfsd41: error out on repeated RECLAIM_COMPLETE
  nfsd41: compare request's opcnt with session's maxops at nfsd4_sequence
  nfsd v4.1 lOCKT clientid field must be ignored
  nfsd41: add flag checking for create_session
  nfsd41: make sure nfs server process OPEN with EXCLUSIVE4_1 correctly
  nfsd4: fix wrongsec handling for PUTFH + op cases
  nfsd4: make fh_verify responsibility of nfsd_lookup_dentry caller
  nfsd4: introduce OPDESC helper
  nfsd4: allow fh_verify caller to skip pseudoflavor checks
  nfsd: distinguish functions of NFSD_MAY_* flags
  svcrpc: complete svsk processing on cb receive failure
  svcrpc: take advantage of tcp autotuning
  SUNRPC: Don't wait for full record to receive tcp data
  svcrpc: copy cb reply instead of pages
  svcrpc: close connection if client sends short packet
  svcrpc: note network-order types in svc_process_calldir
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm kcopyd: return client directly and not through a pointer
  dm kcopyd: reserve fewer pages
  dm io: use fixed initial mempool size
  dm kcopyd: alloc pages from the main page allocator
  dm kcopyd: add gfp parm to alloc_pl
  dm kcopyd: remove superfluous page allocation spinlock
  dm kcopyd: preallocate sub jobs to avoid deadlock
  dm kcopyd: avoid pointless job splitting
  dm mpath: do not fail paths after integrity errors
  dm table: reject devices without request fns
  dm table: allow targets to support discards internally

* 'nfs-for-2.6.40' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  SUNRPC: Support for RPC over AF_LOCAL transports
  SUNRPC: Remove obsolete comment
  SUNRPC: Use AF_LOCAL for rpcbind upcalls
  SUNRPC: Clean up use of curly braces in switch cases
  NFS: Revert NFSROOT default mount options
  SUNRPC: Rename xs_encode_tcp_fragment_header()
  nfs,rcu: convert call_rcu(nfs_free_delegation_callback) to kfree_rcu()
  nfs41: Correct offset for LAYOUTCOMMIT
  NFS: nfs_update_inode: print current and new inode size in debug output
  NFSv4.1: Fix the handling of NFS4ERR_SEQ_MISORDERED errors
  NFSv4: Handle expired stateids when the lease is still valid
  SUNRPC: Deal with the lack of a SYN_SENT sk->sk_state_change callback...

* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus:
  Squashfs: Fix sanity check patches on big-endian systems

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI EC: remove redundant code
  ACPI: Add D3 cold state
  ACPI: processor: fix processor_physically_present in UP kernel
  ACPI: Split out custom_method functionality into an own driver
  ACPI: Cleanup custom_method debug stuff
  ACPI EC: enable MSI workaround for Quanta laptops
  ACPICA: Update to version 20110413
  ACPICA: Execute an orphan _REG method under the EC device
  ACPICA: Move ACPI_NUM_PREDEFINED_REGIONS to a more appropriate place
  ACPICA: Update internal address SpaceID for DataTable regions
  ACPICA: Add more methods eligible for NULL package element removal
  ACPICA: Split all internal Global Lock functions to new file - evglock
  ACPI: EC: add another DMI check for ASUS hardware
  ACPI EC: remove dead code
  ACPICA: Fix code divergence of global lock handling
  ACPICA: Use acpi_os_create_lock interface
  ACPI: osl, add acpi_os_create_lock interface
  ACPI:Fix goto flows in thermal-sys

* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  x86 idle: deprecate mwait_idle() and "idle=mwait" cmdline param
  x86 idle: deprecate "no-hlt" cmdline param
  x86 idle APM: deprecate CONFIG_APM_CPU_IDLE
  x86 idle floppy: deprecate disable_hlt()
  x86 idle: EXPORT_SYMBOL(default_idle, pm_idle) only when APM demands it
  x86 idle: clarify AMD erratum 400 workaround
  idle governor: Avoid lock acquisition to read pm_qos before entering idle
  cpuidle: menu: fixed wrapping timers at 4.294 seconds

Commit 1495f230 ("vmscan: change shrinker API by passing
shrink_control struct") changed the API of ->shrink(), but missed ubifs
and cifs instances.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Implement pg_test vector to test for max IO sizes. We calculate
a max_io_size member only once, and cache it in lseg so to not
do so on every page insert.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[simplify logic]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

By default, unless pnfs is used coalesce pages until pg_bsize
(rsize or wsize) is reached.

pnfs layout drivers define their own pg_test methods that use
pnfs_generic_pg_test and need to define their own I/O size
limits (e.g. based on the file stripe size).

[Move a check from nfs_pageio_do_add_request to nfs_generic_pg_test]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

Signed-off-by: Benny Halevy <bhalevy@panasas.com>

Signed-off-by: Benny Halevy <bhalevy@panasas.com>

Use common code for pnfs_pageio_init_{read,write} and use
a common generic pg_test function.

Note that this function always assumes the the layout driver's
pg_test method is implemented.

[Fix BUG]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

* Define API for io-engines to report delta_space_used in IOs
* Encode the osd-layout specific information of the layoutcommit
  XDR buffer.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

Add a layout driver method to encode the layout type specific
opaque part of layout commit in-line in the xdr stream.

Currently, the pnfs-objects layout driver uses it to encode metadata hints
to the MDS and the blocks layout driver to commit provisionally allocated
extents to the file.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

An io_state pre-allocates an error information structure for each
possible osd-device that might error during IO. When IO is done if all
was well the io_state is freed. (as today). If the I/O has ended with an
error, the io_state is queued on a per-layout err_list. When eventually
encode_layoutreturn() is called, each error is properly encoded on the
XDR buffer and only then the io_state is removed from err_list and
de-allocated.

It is up to the io_engine to fill in the segment that fault and the type
of osd_error that occurred. By calling objlayout_io_set_result() for
each failing device.

In objio_osd:
* Allocate io-error descriptors space as part of io_state
* Use generic objlayout error reporting at end of io.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

Add a layout driver method to encode the layout type specific
opaque part of layout return in-line in the xdr stream.

Currently the pnfs-objects layout driver uses it to encode i/o error
information on LAYOUTRETURN.
Signed-off-by: Andy Adamson <andros@netapp.com>
[fixup layout header pointer for encode_layoutreturn]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

With the objects layout security model, we have object capabilities
that are associated with the layout and we anticipate that the server
will issue a cb_layoutrecall for any setattr that changes security
related attributes (user/group/mode/acl) or truncates the file.

Therefore, the layout is returned before issuing the setattr to avoid
the anticipated cb_layoutrecall.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

NFSv4.1 LAYOUTRETURN implementation

Currently, does not support layout-type payload encoding.
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Zhang Jingwang <zhangjingwang@nrchpc.ac.cn>
[call pnfs_return_layout right before pnfs_destroy_layout]
[remove assert_spin_locked from pnfs_clear_lseg_list]
[remove wait parameter from the layoutreturn path.]
[remove return_type field from nfs4_layoutreturn_args]
[remove range from nfs4_layoutreturn_args]
[no need to send layoutcommit from _pnfs_return_layout]
[don't wait on sync layoutreturn]
[fix layout stateid in layoutreturn args]
[fixed NULL deref in _pnfs_return_layout]
[removed recaim member of nfs4_layoutreturn_args]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>