- 11 Feb, 2007 40 commits
-
-
Mike Frysinger authored
Fix typo when describing RTC_WKALM. Add some helpful pointers to people developing their own RTC driver. Change a bunch of the error messages in the test program to be a bit more helpful. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mathieu Desnoyers authored
The order of locking between lockdep_off/on() and local_irq_save/restore() in vprintk() should be changed. * In kernel/printk.c : vprintk() does : preempt_disable() local_irq_save() lockdep_off() spin_lock(&logbuf_lock) spin_unlock(&logbuf_lock) if(!down_trylock(&console_sem)) up(&console_sem) lockdep_on() local_irq_restore() preempt_enable() The goals here is to make sure we do not call printk() recursively from kernel/lockdep.c:__lock_acquire() (called from spin_* and down/up) nor from kernel/lockdep.c:trace_hardirqs_on/off() (called from local_irq_restore/save). It can then potentially call printk() through mark_held_locks/mark_lock. It correctly protects against the spin_lock call and the up/down call, but it does not protect against local_irq_restore. It could cause infinite recursive printk/trace_hardirqs_on() calls when printk() is called from the mark_lock() error handing path. We should change the locking so it becomes correct : preempt_disable() lockdep_off() local_irq_save() spin_lock(&logbuf_lock) spin_unlock(&logbuf_lock) if(!down_trylock(&console_sem)) up(&console_sem) local_irq_restore() lockdep_on() preempt_enable() Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Robert P. J. Day authored
Remove the unused kernel config option PARIDE_PARPORT. Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Signed-off-by:
-
Robert P. J. Day authored
Remove the kernel config option ZISOFS_FS, since it appears that the actual option is simply ZISOFS. Signed-off-by:
-
Robert P. J. Day authored
Remove the few references to the obsolete kernel config option DEBUG_RWSEMS. Signed-off-by:
-
Robert P. J. Day authored
Remove the dead kernel config option AEDSP16_MPU401. Signed-off-by: Robert P. J. Day <mindspring.com> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Robert P. J. Day authored
Replace a small number of expressions with a call to the "container_of()" macro. Signed-off-by:
Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Signed-off-by:
-
Adrian Bunk authored
- #ifdef guard this header for multiple inclusion - adjust the #include's to what is actually required by this header - remove an unneeded #ifdef - #endif comments Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Adrian Bunk authored
- reduce the userspace visible part - fix the in-kernel compilation Signed-off-by:
-
Robert P. J. Day authored
Remove the last (and commented out) invocation of the obsolete smp_commence() call. Signed-off-by:
Ingo Molnar <mingo@redhat.com> Signed-off-by:
-
Nick Piggin authored
unlock_buffer(), like unlock_page(), must not clear the lock without ensuring that the critical section is closed. Mingming later sent the same patch, saying: We are running SDET benchmark and saw double free issue for ext3 extended attributes block, which complains the same xattr block already being freed (in ext3_xattr_release_block()). The problem could also been triggered by multiple threads loop untar/rm a kernel tree. The race is caused by missing a memory barrier at unlock_buffer() before the lock bit being cleared, resulting in possible concurrent h_refcounter update. That causes a reference counter leak, then later leads to the double free that we have seen. Inside unlock_buffer(), there is a memory barrier is placed *after* the lock bit is being cleared, however, there is no memory barrier *before* the bit is cleared. On some arch the h_refcount update instruction and the clear bit instruction could be reordered, thus leave the critical section re-entered. The race is like this: For example, if the h_refcount is initialized as 1, cpu 0: cpu1 -------------------------------------- ----------------------------------- lock_buffer() /* test_and_set_bit */ clear_buffer_locked(bh); lock_buffer() /* test_and_set_bit */ h_refcount = h_refcount+1; /* = 2*/ h_refcount = h_refcount + 1; /*= 2 */ clear_buffer_locked(bh); .... ...... We lost a h_refcount here. We need a memory barrier before the buffer head lock bit being cleared to force the order of the two writes. Please apply. Signed-off-by:Nick Piggin <npiggin@suse.de> Signed-off-by:
Mingming Cao <cmm@us.ibm.com> Signed-off-by:
-
Rob Landley authored
Documentation for lib/rbtree.c. Signed-off-by:
Rob Landley <rob@landley.net> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by:
-
Robert P. J. Day authored
Extend the set of "__attribute__" shortcut macros, and remove identical (and now superfluous) definitions from a couple of source files. based on a page at robert love's blog: http://rlove.org/log/2005102601 extend the set of shortcut macros defined in compiler-gcc.h with the following: #define __packed __attribute__((packed)) #define __weak __attribute__((weak)) #define __naked __attribute__((naked)) #define __noreturn __attribute__((noreturn)) #define __pure __attribute__((pure)) #define __aligned(x) __attribute__((aligned(x))) #define __printf(a,b) __attribute__((format(printf,a,b))) Once these are in place, it's up to subsystem maintainers to decide if they want to take advantage of them. there is already a strong precedent for using shortcuts like this in the source tree. The ones that might give people pause are "__aligned" and "__printf", but shortcuts for both of those are already in use, and in some ways very confusingly. note the two very different definitions for a macro named "ALIGNED": drivers/net/sgiseeq.c:#define ALIGNED(x) ((((unsigned long)(x)) + 0xf) & ~(0xf)) drivers/scsi/ultrastor.c:#define ALIGNED(x) __attribute__((aligned(x))) also: include/acpi/platform/acgcc.h: #define ACPI_PRINTF_LIKE(c) __attribute__ ((__format__ (__printf__, c, c+1))) Given the precedent, then, it seems logical to at least standardize on a consistent set of these macros. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Kirill Korotaev authored
Remove hack with printing space to wake up klogd. Use explicit wake_up_klogd(). See earlier discussion http://groups.google.com/group/fa.linux.kernel/browse_frm/thread/75f496668409f58d/1a8f28983a51e1ff?lnk=st&q=wake_up_klogd+group%3Afa.linux.kernel&rnum=2#1a8f28983a51e1ffSigned-off-by:
Alexey Dobriyan <adobriyan@openvz.org> Signed-off-by:
-
Kirill Korotaev authored
Part of long forgotten patch http://groups.google.com/group/fa.linux.kernel/msg/e98e941ce1cf29f6?dmode=source Since then, m32r grabbed two copies. Leave s390 copy because of important absence of CONFIG_VT, but remove references to non-existent timerlist_lock. ia64 also loses timerlist_lock. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by:
-
Robert P. J. Day authored
Remove the lone, remaining reference to the long-deceased rwlock_is_locked() macro. Signed-off-by:
-
Eric Sandeen authored
- Naming is confusing, ext3_inc_count manipulates i_nlink not i_count - handle argument passed in is not used - ext3 and ext4 already call inc_nlink and dec_nlink directly in other places Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Eric Sandeen authored
Return -ENOENT from ext[34]_link if we've raced with unlink and i_nlink is 0. Doing otherwise has the potential to corrupt the orphan inode list, because we'd wind up with an inode with a non-zero link count on the list, and it will never get properly cleaned up & removed from the orphan list before it is freed. [akpm@osdl.org: build fix] Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by:
-
Hugh Dickins authored
Fix insecure default behaviour reported by Tigran Aivazian: if an ext2 or ext3 or ext4 filesystem is tuned to mount with "acl", but mounted by a kernel built without ACL support, then umask was ignored when creating inodes - though root or user has umask 022, touch creates files as 0666, and mkdir creates directories as 0777. This appears to have worked right until 2.6.11, when a fix to the default mode on symlinks (always 0777) assumed VFS applies umask: which it does, unless the mount is marked for ACLs; but ext[234] set MS_POSIXACL in s_flags according to s_mount_opt set according to def_mount_opts. We could revert to the 2.6.10 ext[234]_init_acl (adding an S_ISLNK test); but other filesystems only set MS_POSIXACL when ACLs are configured. We could fix this at another level; but it seems most robust to avoid setting the s_mount_opt flag in the first place (at the expense of more ifdefs). Likewise don't set the XATTR_USER flag when built without XATTR support. Signed-off-by:
Hugh Dickins <hugh@veritas.com> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: <linux-ext4@vger.kernel.org> Cc: Andreas Gruenbacher <agruen@suse.de> Signed-off-by:
-
Alexey Dobriyan authored
Compile-tested. Signed-off-by:
-
Alexey Dobriyan authored
fix-rmmod-read-write-races-in-proc-entries.patch doesn't want dynamically allocated ->proc_fops, because it will set it to NULL at module unload time. Regardless of module status, switch to statically allocated ->proc_fops which leads to simpler code without wrappers. AFAICS, also fix the following bug: "sn_force_interrupt" proc entry set ->write for itself, but was created with 0444 permissions. Change to 0644. Signed-off-by:
-
Jeff Moyer authored
Minor number 0 (under the raw major) is reserved for the rawctl device file, which is used to query, set, and unset raw device bindings. However, the ioctl interface does not protect the user from specifying a raw device with minor number 0: $ sudo ./raw /dev/raw/raw0 /dev/VolGroup00/swap /dev/raw/raw0: bound to major 253, minor 2 $ ls -l /dev/rawctl ls: /dev/rawctl: No such file or directory $ ls -l /dev/raw/raw0 crw------- 1 root root 162, 0 Jan 12 10:51 /dev/raw/raw0 $ sudo ./raw -qa Cannot open master raw device '/dev/rawctl' (No such file or directory) As you can see, this prevents any further raw operations from succeeding. The fix (from Steve Fernandez) is quite simple--do not allow the allocation of minor number 0. Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Cc: Steven Fernandez <sfernand@redhat.com> Signed-off-by:
-
Ingo Molnar authored
gcc emits this warning: kernel/auditfilter.c: In function 'audit_filter_user': kernel/auditfilter.c:1611: warning: 'state' is used uninitialized in this function I tend to agree with gcc - there are a couple of plausible exit paths from audit_filter_user_rules() where it does not set 'state', keeping the variable uninitialized. For example if a filter rule has an AUDIT_POSSIBLE action. Initialize to 'wont audit'. Fix whitespace damage too. Signed-off-by:
-
Eric Sandeen authored
In the rare case where we have skipped orphan inode processing due to a readonly block device, and the block device subsequently changes back to read-write, disallow a remount,rw transition of the filesystem when we have an unprocessed orphan inodes as this would corrupt the list. Ideally we should process the orphan inode list during the remount, but that's trickier, and this plugs the hole for now. Signed-off-by:
-
Eric Sandeen authored
In the rare case where we have skipped orphan inode processing due to a readonly block device, and the block device subsequently changes back to read-write, disallow a remount,rw transition of the filesystem when we have an unprocessed orphan inodes as this would corrupt the list. Ideally we should process the orphan inode list during the remount, but that's trickier, and this plugs the hole for now. Signed-off-by:
-
Adrian Bunk authored
- no longer a userspace header - add #include <linux/types.h> for in-kernel compilation Signed-off-by:
-
Matthias Fuchs authored
Add support for the CPCI-ASIO4 quad port CompactPCI UART board from electronic system design gmbh. Signed-off-by:
Matthias Fuchs <matthias.fuchs@esd-electronics.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Thomas Hoehn authored
Get the Perle quad-modem PCI card (PCI-RAS4) detected by serial driver. It may also get the PCI-RAS8 running, but can't guarantee as I didn't had one for testing. Signed-off-by:
Thomas Hoehn <thomas.hoehn@avocent.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Randy Dunlap authored
- in man and text mode output, if the function return type is empty (like it is for macros), don't print the return type and a following space; this fixes an output malalignment; - in the function short description, strip leading, trailing, and multiple embedded spaces (to one space); this makes function name/description output spacing consistent; - fix a comment typo; Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Randy Dunlap authored
Cleanup kernel-doc notation in drivers/firmware/edd.c. Add edd.c to DocBook/kernel-api.tmpl. Signed-off-by:
Matt Domsch <Matt_Domsch@dell.com> Signed-off-by:
-
David Brownell authored
This is an "RTC framework" driver for the "CMOS" RTCs which are standard on PCs and some other platforms. That's MC146818 compatible silicon. Advantages of this vs. drivers/char/rtc.c (use one _or_ the other, only one will be able to claim the RTC irq) include: - This leverages both the new RTC framework and the driver model; both PNPACPI and platform device modes are supported. (A separate patch creates a platform device on PCs where PNPACPI isn't configured.) - It supports common extensions like longer alarms. (A separate patch exports that information from ACPI through platform_data.) - Likewise, system wakeup events use "real driver model support", with policy control via sysfs "wakeup" attributes and and using normal rtc ioctls to manage wakeup. (Patch in the works. The ACPI hooks are known; /proc/acpi/alarm can vanish. Making it work with EFI will be a minor challenge to someone with e.g. a MiniMac.) It's not yet been tested on non-x86 systems, without ACPI, or with HPET. And the RTC framework will surely have teething pains on "mainstream" PC-based systems (though must embedded Linux systems use it heavily), not limited to sorting out the "/dev/rtc0" issue (udev easily tweaked). Also, the ALSA rtctimer code doesn't use the new RTC API. Otherwise, this should be a no-known-regressions replacement for the old drivers/char/rtc.c driver, and should help the non-embedded distros (and the new timekeeping code) start to switch to the framework. Note also that any systems using "rtc-m48t86" are candidates to switch over to this more functional driver; the platform data is different, and the way bytes are read is different, but otherwise those chips should be compatible. [akpm@osdl.org: sparc32 fix] [akpm@osdl.org: sparc64 fix] Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Cc: Woody Suwalski <woodys@xandros.com> Cc: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by:
-
Mathieu Desnoyers authored
Signed-off-by:
-
Kyle McMartin authored
I noticed that almost all architectures implemented exactly the same sys32_sysinfo... except parisc, where a bug was to be found in handling of the uptime. So let's remove a whole whack of code for fun and profit. Cribbed compat_sys_sysinfo from x86_64's implementation, since I figured it would be the best tested. This patch incorporates Arnd's suggestion of not using set_fs/get_fs, but instead extracting out the common code from sys_sysinfo. Cc: Christoph Hellwig <hch@infradead.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by:
-
Robert P. J. Day authored
A variety of (mostly) innocuous fixes to the embedded kernel-doc content in source files, including: * make multi-line initial descriptions single line * denote some function names, constants and structs as such * change erroneous opening '/*' to '/**' in a few places * reword some text for clarity Signed-off-by:
-
Robert P. J. Day authored
Explain a couple of the most common errors in kernel-doc usage. Signed-off-by:
-
Alan Cox authored
Mostly so people can see the work in progress. This enhances the encode function which isn't currently used in the base tree but is when using some of the testing tty patches. This resolves a problem with some hardware where applications got confusing information from the tty ioctls. Correct but confusing. In some situations asking for, say, 9600 baud actually gets you 9595 baud or similar near-miss values. With the old code this meant that a request for B9600 got a return of BOTHER, 9595 which programs interpreted as a failure. The new code now works on the following basis - If you ask for specific rate via BOTHER, you get a precise return - If you ask for a standard Bfoo rate and the result is close you get a Bfoo return - If you ask for a standard Bfoo rate and get something way off you get a BOTHER/rate return This seems to fix up the cases I've found where this broke compatibility. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Randy Dunlap authored
Allow whitespace in pointer-to-function [accept "(* done)", not just "(*done)"]. Allow tabs (spaces are already allowed) between "#define" and a macro name. Signed-off-by:
-
Randy Dunlap authored
Alphabetize the sysrq command keys list. Signed-off-by:
-
Alexey Dobriyan authored
Bug: pnx8550 code creates directory but resets ->nlink to 1. create_proc_entry() et al will correctly set ->nlink for you. Signed-off-by:
-
