- 08 Aug, 2023 4 commits
-
-
Mathieu Desnoyers authored
Use rseq_unqual_scalar_typeof() rather than typeof() in macros to remove the volatile qualifier (if there is one in the input argument), thus generating better assembly code in those scenarios. Also add extra brackets around the "p" parameter in RSEQ_READ_ONCE(), RSEQ_WRITE_ONCE(), and rseq_unqual_scalar_typeof() across architectures to preserve expectations of operator priority. Here is an example that shows how operator priority may be an issue with missing parentheses: #define m(p) \ do { \ __typeof__(*p) v = 0; \ } while (0) void fct(unsigned long long *p1) { m(p1 + 1); /* works */ m(1 + p1); /* broken */ } Signed-off-by:Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org>
-
Mathieu Desnoyers authored
The arm64 load-acquire/store-release macros from the Linux kernel rseq selftests are buggy. Remplace them by a working implementation. Signed-off-by:
-
Mathieu Desnoyers authored
Allow defining variables and perform cast with a typeof which removes the volatile and const qualifiers. This prevents declaring a stack variable with a volatile qualifier within a macro, which would generate sub-optimal assembler. This is imported from the "librseq" project. Signed-off-by:
-
Mathieu Desnoyers authored
Ensure that the basic percpu ops tests are effectively built against mm_cid. Signed-off-by:
-
- 25 Jul, 2023 21 commits
-
-
Shuah Khan authored
Add newly addded set-process-name test to .gitignore Signed-off-by: -
Shuah Khan authored
Remove clean target in Makefile to fix the following warning and use the one in common lib.mk Makefile:14: warning: overriding recipe for target 'clean' ../lib.mk:160: warning: ignoring old recipe for target 'clean' Signed-off-by: -
Ilpo Järvinen authored
cat_val() is only used during CAT test but it checks for test type. Remove test type checks and the unused else branch from cat_val(). Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by:
Reinette Chatre <reinette.chatre@intel.com> Tested-by:
Babu Moger <babu.moger@amd.com> Tested-by:
Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com> Signed-off-by:
-
Ilpo Järvinen authored
Results include warm-up test which is discarded before passing the sum to show_cache_info(). show_cache_info() handles this by subtracting one from the number of tests in divisor. It is a trappy construct to have sum and number of tests parameters to disagree like this. A more logical place for subtracting the skipped tests is where the sum is calculated so move it there. Pass the correct number of tests to show_cache_info() so it can be used directly as the divisor for calculating the average. Signed-off-by:
-
Ilpo Järvinen authored
CAT and CMT tests have count_of_bits, long_mask, cbm_mask, and cache_size global variables that can be moved into the sole using function. Make the global variables local variables of the relevant function to scope them better. While at it, move cache_size initialization into the declaration line. Signed-off-by:
-
Ilpo Järvinen authored
struct resctrl_val_param has ->setup() function that accepts variable argument list. All test cases use only 1 argument as input and it's the struct resctrl_val_param pointer. Instead of variable argument list, directly pass struct resctrl_val_param pointer as the only parameter to ->setup(). Co-developed-by:
Fenghua Yu <fenghua.yu@intel.com> Signed-off-by:
-
Ilpo Järvinen authored
Test name is passed to fill_buf functions so that they can loop around buffer only once. This is required for CAT test case. To loop around buffer only once, caller doesn't need to let fill_buf know which test case it is. Instead, pass a boolean argument 'once' which makes fill_buf more generic. As run_benchmark() no longer needs to pass the test name to run_fill_buf(), a few test running functions can be simplified to not write the test name into the default benchmark_cmd. The has_ben argument can also be removed now from those test running functions. Co-developed-by:
-
Ilpo Järvinen authored
fill_buf's arguments can be improved in multiple ways: - Multiple functions in fill_buf have start_ptr as one of their argument which is a bit long and the extra "start" is pretty obvious when it comes to pointers. - Some of the functions take end_ptr and others size_t to indicate the end of the buffer. - Some arguments meaning buffer size are called just 's' - mem_flush() takes void * but immediately converts it to char * Cleanup the parameters to make things simpler and more consistent: - Rename start_ptr to simply buf as it's shorter. - Replace end_ptr and s parameters with buf_size and only calculate end_ptr in the functions that truly use it. - Make mem_flush() parameters to follow the same convention as the other functions in fill_buf. - convert mem_flush() char * to unsigned char *. While at it, fix also a typo in a comment. Signed-off-by: -
Ilpo Järvinen authored
fill_buf stores buffer pointer into global variable startptr that is only used in fill_cache(). Remove startptr as global variable, the local variable in fill_cache() is enough to keep the pointer. Signed-off-by:
-
Ilpo Järvinen authored
run_fill_buf()'s malloc_and_init_memory parameter is always 1. There's also duplicated memory init code for malloc_and_init_memory == 0 case in fill_buf() which is unused. Remove the malloc_and_init_memory parameter and the duplicated mem init code. While at it, fix also a typo in run_fill_buf() prototype's argument. Co-developed-by:
-
Ilpo Järvinen authored
When no benchmark_cmd is given, benchmark_cmd[1] is set to span in main(). There's no need to do it again in run_mba_test(). Remove the duplicated preparation for span argument into benchmark_cmd[1] from run_mba_test(). After this, the has_ben and span arguments to run_mba_test() can be removed. Co-developed-by:
-
Ilpo Järvinen authored
MBA and MBM tests to use megabytes to represent span. CMT test uses bytes. The difference requires run_benchmark() to size the buffer differently based on the test name, which in turn requires passing the test name into run_benchmark(). Convert MBA and MBM tests to use span internally in bytes like CMT test to remove the internal inconsistency between the tests. Remove the test dependent buffer sizing from run_benchmark(). This change eliminates one of the reasons why the test name has to be passed around but there are still other users too so the test name passing cannot yet be removed. Co-developed-by:
-
Ilpo Järvinen authored
Span is defined either as unsigned long or int. Consistently use size_t everywhere for span as it refers to size of the memory block. Co-developed-by:
-
Ilpo Järvinen authored
Resctrl FS mount/umount are now cleanly paired leaving .mum_resctrlfs in the struct resctrl_val_param unused. Remove .mum_resctrlfs from struct resctrl_val_param. Signed-off-by:
-
Ilpo Järvinen authored
Mount/umount of the resctrl FS is now paired nicely per test. Rename remount_resctrl(bool mum_resctrlfs) to mount_resctrl(). Make it unconditionally try to mount the resctrl FS and return error if resctrl FS was mounted already. While at it, group the mount/umount prototypes in the header. Signed-off-by:
-
Ilpo Järvinen authored
A few places currently lack umounting resctrl FS on error paths: - cmt_resctrl_val() has multiple error paths with direct return. - cat_perf_miss_val() has multiple error paths with direct return. In addition, validate_resctrl_feature_request() is called by run_mbm_test() and run_mba_test(). Neither MBA nor MBM test tries to umount resctrl FS. Each and every test does require resctrl FS to be present already for feature check. Thus, it makes sense to just mount it on higher level in resctrl_tests.c and properly pair it with umount. Move resctrl FS (re)mount/unmount into each test function in resctrl_tests.c. Make feature validation to simply check that resctrl FS is mounted. As there's the final umount in main() before this change, the selftest should not leave resctrl FS behind after the tests even if one of the forementioned paths is taken (thus, no fixes tag). Signed-off-by:
-
Ilpo Järvinen authored
Resctrl FS mount/remount/umount code is hard to track. Better approach is to use mount/umount pair for each test but that assumes resctrl FS is not mounted beforehand. Change umount_resctrlfs() so that it can unmount resctrl FS from any path, and enable further simplifications into mount/remount/umount logic by unmounting resctrl FS at the start if a pre-existing mountpoint is found. Suggested-by:
-
Ilpo Järvinen authored
Perf event fd (fd_lm) is not closed when run_fill_buf() returns error. Close fd_lm only in cat_val() to make it easier to track it is always closed. Fixes: 790bf585 ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest") Signed-off-by:
-
Ilpo Järvinen authored
A child calls PARENT_EXIT() when it fails to run a benchmark to kill the parent process. PARENT_EXIT() lacks unmount for the resctrl FS and the parent won't be there to unmount it either after it gets killed. Add the resctrl FS unmount also to PARENT_EXIT(). Fixes: 591a6e85 ("selftests/resctrl: Add basic resctrl file system operations and data") Signed-off-by:
-
Ilpo Järvinen authored
The error path in fill_cache() does return before the allocated buffer is freed leaking the buffer. The leak was introduced when fill_cache_read() started to return errors in commit c7b607fa ("selftests/resctrl: Fix null pointer dereference on open failed"), before that both fill functions always returned 0. Move free() earlier to prevent the mem leak. Fixes: c7b607fa ("selftests/resctrl: Fix null pointer dereference on open failed") Signed-off-by:
-
Ilpo Järvinen authored
Makefile only lists *.c as build dependencies for the resctrl_tests executable which excludes resctrl.h. Add *.h to wildcard() to include resctrl.h. Fixes: 591a6e85 ("selftests/resctrl: Add basic resctrl file system operations and data") Signed-off-by:
-
- 24 Jul, 2023 1 commit
-
-
Osama Muhammad authored
This patch will add the new test, which covers the prctl call PR_SET_NAME command. The test tries to give a name using the PR_SET_NAME call and then confirm it that it changed correctly by using PR_GET_NAME. It also tries to rename it with empty name.In the test PR_GET_NAME is tested by passing null pointer to it and check its behaviour. Signed-off-by:
Osama Muhammad <osmtendev@gmail.com> Reviewed-by:
Muhammad Usama Anjum <usama.anjum@collabora.com> Tested-by:
-
- 23 Jul, 2023 14 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: - Swapping the ring buffer for snapshotting (for things like irqsoff) can crash if the ring buffer is being resized. Disable swapping when this happens. The missed swap will be reported to the tracer - Report error if the histogram fails to be created due to an error in adding a histogram variable, in event_hist_trigger_parse() - Remove unused declaration of tracing_map_set_field_descr() * tag 'trace-v6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/histograms: Return an error if we fail to add histogram to hist_vars list ring-buffer: Do not swap cpu_buffer during resize process tracing: Remove unused extern declaration tracing_map_set_field_descr()
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix stale help text in gconfig - Support *.S files in compile_commands.json - Flatten KBUILD_CFLAGS - Fix external module builds with Rust so that temporary files are created in the modules directories instead of the kernel tree * tag 'kbuild-fixes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: rust: avoid creating temporary files kbuild: flatten KBUILD_CFLAGS gen_compile_commands: add assembly files to compilation database kconfig: gconfig: correct program name in help text kconfig: gconfig: drop the Show Debug Info help text
-
Miguel Ojeda authored
`rustc` outputs by default the temporary files (i.e. the ones saved by `-Csave-temps`, such as `*.rcgu*` files) in the current working directory when `-o` and `--out-dir` are not given (even if `--emit=x=path` is given, i.e. it does not use those for temporaries). Since out-of-tree modules are compiled from the `linux` tree, `rustc` then tries to create them there, which may not be accessible. Thus pass `--out-dir` explicitly, even if it is just for the temporary files. Similarly, do so for Rust host programs too. Reported-by:
Raphael Nestler <raphael.nestler@gmail.com> Closes: https://github.com/Rust-for-Linux/linux/issues/1015Reported-by:
Andrea Righi <andrea.righi@canonical.com> Tested-by: Raphael Nestler <raphael.nestler@gmail.com> # non-hostprogs Tested-by: Andrea Righi <andrea.righi@canonical.com> # non-hostprogs Fixes: 295d8398 ("kbuild: specify output names separately for each emission type from rustc") Cc: stable@vger.kernel.org Signed-off-by:
Miguel Ojeda <ojeda@kernel.org> Tested-by:
Martin Rodriguez Reboredo <yakoyoku@gmail.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "ARM: - Avoid pKVM finalization if KVM initialization fails - Add missing BTI instructions in the hypervisor, fixing an early boot failure on BTI systems - Handle MMU notifiers correctly for non hugepage-aligned memslots - Work around a bug in the architecture where hypervisor timer controls have UNKNOWN behavior under nested virt - Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG in cpu hotplug resulting from per-CPU accessor sanity checking - Make WFI emulation on GICv4 systems robust w.r.t. preemption, consistently requesting a doorbell interrupt on vcpu_put() - Uphold RES0 sysreg behavior when emulating older PMU versions - Avoid macro expansion when initializing PMU register names, ensuring the tracepoints pretty-print the sysreg s390: - Two fixes for asynchronous destroy x86 fixes will come early next week" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: pv: fix index value of replaced ASCE KVM: s390: pv: simplify shutdown and fix race KVM: arm64: Fix the name of sys_reg_desc related to PMU KVM: arm64: Correctly handle RES0 bits PMEVTYPER<n>_EL0.evtCount KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t preemption KVM: arm64: Add missing BTI instructions KVM: arm64: Correctly handle page aging notifiers for unaligned memslot KVM: arm64: Disable preemption in kvm_arch_hardware_enable() KVM: arm64: Handle kvm_arm_init failure correctly in finalize_pkvm KVM: arm64: timers: Use CNTHCTL_EL2 when setting non-CNTKCTL_EL1 bits -
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Bug and regression fixes for 6.5-rc3 for ext4's mballoc and jbd2's checkpoint code" * tag 'ext4_for_linus-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix rbtree traversal bug in ext4_mb_use_preallocated ext4: fix off by one issue in ext4_mb_choose_next_group_best_avail() ext4: correct inline offset when handling xattrs in inode body jbd2: remove __journal_try_to_free_buffer() jbd2: fix a race when checking checkpoint buffer busy jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint jbd2: remove journal_clean_one_cp_list() jbd2: remove t_checkpoint_io_list jbd2: recheck chechpointing non-dirty buffer
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fix from Steve French: "Add minor debugging improvement. The change improves ability to read a network trace to debug problems on encrypted connections which are very common (e.g. using wireshark or tcpdump). That works today with tools like 'smbinfo keys /mnt/file' but requires passing in a filename on the mount (see e.g. [1]), but it often makes more sense to just pass in the mount point path (ie a directory not a filename). So this fix was needed to debug some types of problems (an obvious example is on an encrypted connection failing operations on an empty share or with no files in the root of the directory) - so you can simply pass in the 'smbinfo keys <mntpoint>' and get the information that wireshark needs" Link: https://wiki.samba.org/index.php/Wireshark_Decryption [1] * tag '6.5-rc2-smb3-client-fixes-ver2' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number for cifs.ko cifs: allow dumping keys for directories too
-
Paolo Bonzini authored
Merge tag 'kvm-s390-master-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD Two fixes for asynchronous destroy
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.5, part #1 - Avoid pKVM finalization if KVM initialization fails - Add missing BTI instructions in the hypervisor, fixing an early boot failure on BTI systems - Handle MMU notifiers correctly for non hugepage-aligned memslots - Work around a bug in the architecture where hypervisor timer controls have UNKNOWN behavior under nested virt. - Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG in cpu hotplug resulting from per-CPU accessor sanity checking. - Make WFI emulation on GICv4 systems robust w.r.t. preemption, consistently requesting a doorbell interrupt on vcpu_put() - Uphold RES0 sysreg behavior when emulating older PMU versions - Avoid macro expansion when initializing PMU register names, ensuring the tracepoints pretty-print the sysreg.
-
Mohamed Khalfella authored
Commit 6018b585 ("tracing/histograms: Add histograms to hist_vars if they have referenced variables") added a check to fail histogram creation if save_hist_vars() failed to add histogram to hist_vars list. But the commit failed to set ret to failed return code before jumping to unregister histogram, fix it. Link: https://lore.kernel.org/linux-trace-kernel/20230714203341.51396-1-mkhalfella@purestorage.com Cc: stable@vger.kernel.org Fixes: 6018b585 ("tracing/histograms: Add histograms to hist_vars if they have referenced variables") Signed-off-by:
Mohamed Khalfella <mkhalfella@purestorage.com> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org>
-
Chen Lin authored
When ring_buffer_swap_cpu was called during resize process, the cpu buffer was swapped in the middle, resulting in incorrect state. Continuing to run in the wrong state will result in oops. This issue can be easily reproduced using the following two scripts: /tmp # cat test1.sh //#! /bin/sh for i in `seq 0 100000` do echo 2000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 echo 5000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 done /tmp # cat test2.sh //#! /bin/sh for i in `seq 0 100000` do echo irqsoff > /sys/kernel/debug/tracing/current_tracer sleep 1 echo nop > /sys/kernel/debug/tracing/current_tracer sleep 1 done /tmp # ./test1.sh & /tmp # ./test2.sh & A typical oops log is as follows, sometimes with other different oops logs. [ 231.711293] WARNING: CPU: 0 PID: 9 at kernel/trace/ring_buffer.c:2026 rb_update_pages+0x378/0x3f8 [ 231.713375] Modules linked in: [ 231.714735] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec2 #15 [ 231.716750] Hardware name: linux,dummy-virt (DT) [ 231.718152] Workqueue: events update_pages_handler [ 231.719714] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 231.721171] pc : rb_update_pages+0x378/0x3f8 [ 231.722212] lr : rb_update_pages+0x25c/0x3f8 [ 231.723248] sp : ffff800082b9bd50 [ 231.724169] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000 [ 231.726102] x26: 0000000000000001 x25: fffffffffffff010 x24: 0000000000000ff0 [ 231.728122] x23: ffff0000c3a0b600 x22: ffff0000c3a0b5c0 x21: fffffffffffffe0a [ 231.730203] x20: ffff0000c3a0b600 x19: ffff0000c0102400 x18: 0000000000000000 [ 231.732329] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffe7aa8510 [ 231.734212] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000002 [ 231.736291] x11: ffff8000826998a8 x10: ffff800082b9baf0 x9 : ffff800081137558 [ 231.738195] x8 : fffffc00030e82c8 x7 : 0000000000000000 x6 : 0000000000000001 [ 231.740192] x5 : ffff0000ffbafe00 x4 : 0000000000000000 x3 : 0000000000000000 [ 231.742118] x2 : 00000000000006aa x1 : 0000000000000001 x0 : ffff0000c0007208 [ 231.744196] Call trace: [ 231.744892] rb_update_pages+0x378/0x3f8 [ 231.745893] update_pages_handler+0x1c/0x38 [ 231.746893] process_one_work+0x1f0/0x468 [ 231.747852] worker_thread+0x54/0x410 [ 231.748737] kthread+0x124/0x138 [ 231.749549] ret_from_fork+0x10/0x20 [ 231.750434] ---[ end trace 0000000000000000 ]--- [ 233.720486] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 233.721696] Mem abort info: [ 233.721935] ESR = 0x0000000096000004 [ 233.722283] EC = 0x25: DABT (current EL), IL = 32 bits [ 233.722596] SET = 0, FnV = 0 [ 233.722805] EA = 0, S1PTW = 0 [ 233.723026] FSC = 0x04: level 0 translation fault [ 233.723458] Data abort info: [ 233.723734] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 233.724176] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 233.724589] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 233.725075] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000104943000 [ 233.725592] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 233.726231] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 233.726720] Modules linked in: [ 233.727007] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec2 #15 [ 233.727777] Hardware name: linux,dummy-virt (DT) [ 233.728225] Workqueue: events update_pages_handler [ 233.728655] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 233.729054] pc : rb_update_pages+0x1a8/0x3f8 [ 233.729334] lr : rb_update_pages+0x154/0x3f8 [ 233.729592] sp : ffff800082b9bd50 [ 233.729792] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000 [ 233.730220] x26: 0000000000000000 x25: ffff800082a8b840 x24: ffff0000c0102418 [ 233.730653] x23: 0000000000000000 x22: fffffc000304c880 x21: 0000000000000003 [ 233.731105] x20: 00000000000001f4 x19: ffff0000c0102400 x18: ffff800082fcbc58 [ 233.731727] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000001 [ 233.732282] x14: ffff8000825fe0c8 x13: 0000000000000001 x12: 0000000000000000 [ 233.732709] x11: ffff8000826998a8 x10: 0000000000000ae0 x9 : ffff8000801b760c [ 233.733148] x8 : fefefefefefefeff x7 : 0000000000000018 x6 : ffff0000c03298c0 [ 233.733553] x5 : 0000000000000002 x4 : 0000000000000000 x3 : 0000000000000000 [ 233.733972] x2 : ffff0000c3a0b600 x1 : 0000000000000000 x0 : 0000000000000000 [ 233.734418] Call trace: [ 233.734593] rb_update_pages+0x1a8/0x3f8 [ 233.734853] update_pages_handler+0x1c/0x38 [ 233.735148] process_one_work+0x1f0/0x468 [ 233.735525] worker_thread+0x54/0x410 [ 233.735852] kthread+0x124/0x138 [ 233.736064] ret_from_fork+0x10/0x20 [ 233.736387] Code: 92400000 910006b5 aa000021 aa0303f7 (f9400060) [ 233.736959] ---[ end trace 0000000000000000 ]--- After analysis, the seq of the error is as follows [1-5]: int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size, int cpu_id) { for_each_buffer_cpu(buffer, cpu) { cpu_buffer = buffer->buffers[cpu]; //1. get cpu_buffer, aka cpu_buffer(A) ... ... schedule_work_on(cpu, &cpu_buffer->update_pages_work); //2. 'update_pages_work' is queue on 'cpu', cpu_buffer(A) is passed to // update_pages_handler, do the update process, set 'update_done' in // complete(&cpu_buffer->update_done) and to wakeup resize process. //----> //3. Just at this moment, ring_buffer_swap_cpu is triggered, //cpu_buffer(A) be swaped to cpu_buffer(B), the max_buffer. //ring_buffer_swap_cpu is called as the 'Call trace' below. Call trace: dump_backtrace+0x0/0x2f8 show_stack+0x18/0x28 dump_stack+0x12c/0x188 ring_buffer_swap_cpu+0x2f8/0x328 update_max_tr_single+0x180/0x210 check_critical_timing+0x2b4/0x2c8 tracer_hardirqs_on+0x1c0/0x200 trace_hardirqs_on+0xec/0x378 el0_svc_common+0x64/0x260 do_el0_svc+0x90/0xf8 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb8 el0_sync+0x180/0x1c0 //<---- /* wait for all the updates to complete */ for_each_buffer_cpu(buffer, cpu) { cpu_buffer = buffer->buffers[cpu]; //4. get cpu_buffer, cpu_buffer(B) is used in the following process, //the state of cpu_buffer(A) and cpu_buffer(B) is totally wrong. //for example, cpu_buffer(A)->update_done will leave be set 1, and will //not 'wait_for_completion' at the next resize round. if (!cpu_buffer->nr_pages_to_update) continue; if (cpu_online(cpu)) wait_for_completion(&cpu_buffer->update_done); cpu_buffer->nr_pages_to_update = 0; } ... } //5. the state of cpu_buffer(A) and cpu_buffer(B) is totally wrong, //Continuing to run in the wrong state, then oops occurs. Link: https://lore.kernel.org/linux-trace-kernel/202307191558478409990@zte.com.cnSigned-off-by:Chen Lin <chen.lin5@zte.com.cn> Signed-off-by:
-
YueHaibing authored
Since commit 08d43a5f ("tracing: Add lock-free tracing_map"), this is never used, so can be removed. Link: https://lore.kernel.org/linux-trace-kernel/20230722032123.24664-1-yuehaibing@huawei.com Cc: <mhiramat@kernel.org> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Alexey Dobriyan authored
Make it slightly easier to see which compiler options are added and removed (and not worry about column limit too!). Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by:
Nicolas Schier <n.schier@avm.de> Signed-off-by:
-
Benjamin Gray authored
Like C source files, tooling can find it useful to have the assembly source file compilation recorded. The .S extension appears to used across all architectures. Signed-off-by:
Benjamin Gray <bgray@linux.ibm.com> Reviewed-by:
Fangrui Song <maskray@google.com> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
