Pull USB driver fixes from Greg KH:
 "Here's some USB driver fixes for 4.2-rc3.

  The ususal number of gadget driver fixes are in here, along with some
  new device ids and a build fix for the mn10300 arch which required
  some symbols to be renamed in the mos7720 driver.

  All have been in linux-next for a while with no reported issues"

* tag 'usb-4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: Destroy serial_minors IDR on module exit
  usb: gadget: f_midi: fix error recovery path
  usb: phy: mxs: suspend to RAM causes NULL pointer dereference
  usb: gadget: udc: fix free_irq() after request_irq() failed
  usb: gadget: composite: Fix NULL pointer dereference
  usb: gadget: f_fs: do not set cancel function on synchronous {read,write}
  usb: f_mass_storage: limit number of reported LUNs
  usb: dwc3: core: avoid NULL pointer dereference
  usb: dwc2: embed storage for reg backup in struct dwc2_hsotg
  usb: dwc2: host: allocate qtd before atomic enqueue
  usb: dwc2: host: allocate qh before atomic enqueue
  usb: musb: host: rely on port_mode to call musb_start()
  USB: cp210x: add ID for Aruba Networks controllers
  USB: mos7720: rename registers
  USB: option: add 2020:4000 ID

Pull sound fixes from Takashi Iwai:
 "There are two small fixes for HD-audio and USB LINE6, and the rest are
  a few new quirks and device ID addition that are good enough to get
  into 4.2"

* tag 'sound-4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: Enable HP amp and mute LED on HP Folio 9480m [v3]
  ALSA: line6: Fix -EBUSY error during active monitoring
  ALSA: hda - Fix a wrong busy check in alt PCM open
  ALSA: hda - add codec ID for Broxton display audio codec
  ALSA: usb-audio: Add MIDI support for Steinberg MI2/MI4

Pull GPIO fixes from Linus Walleij:
 "This is a first set of GPIO fixes for the v4.2 series, all hitting
  individual drivers and nothing else (except for a documentation
  oneliner.  I intended to send a request earlier but life intervened)"

* tag 'gpio-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: pca953x: fix nested irqs rescheduling
  gpio: omap: prevent module from being unloaded while in use
  gpio: max732x: Add missing dev reference to gpiochip
  gpio/xilinx: Use correct address when setting initial values.
  gpio: zynq: Fix problem with unbalanced pm_runtime_enable
  gpio: omap: add missed spin_unlock_irqrestore in omap_gpio_irq_type
  gpio: brcmstb: fix null ptr dereference in driver remove
  gpio: Remove double "base" in comment

Pull drm fixes from Dave Airlie:
 "Fixes all over the place.

  The rockchip and imx fixes I missed while on holidays, so I've queued
  them now which makes this a bit bigger.

  The rest is misc amdgpu, radeon, i915 and armada.

  I think the most important thing is the ioctl fix, we dropped the
  avoid compat ball, so we get to add a compat wrapper.

  There is also an i915 revert to avoid a regression with existing
  userspace"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (43 commits)
  drm/ttm: improve uncached page deallocation.
  drm/ttm: fix uncached page deallocation to properly fill page pool v3.
  drm/amdgpu/dce8: Re-set VBLANK interrupt state when enabling a CRTC
  drm/radeon/ci: silence a harmless PCC warning
  drm/amdgpu/cz: silence some dpm debug output
  drm/amdgpu/cz: store the forced dpm level
  drm/amdgpu/cz: unforce dpm levels before forcing to low/high
  drm/amdgpu: remove bogus check in gfx8 rb setup
  drm/amdgpu: set proper index/data pair for smc regs on CZ (v2)
  drm/amdgpu: disable the IP module if early_init returns -ENOENT (v2)
  drm/amdgpu: stop context leak in the error path
  drm/amdgpu: validate the context id in the dependencies
  drm/radeon: fix user ptr race condition
  drm/radeon: Don't flush the GART TLB if rdev->gart.ptr == NULL
  drm/radeon: add a dpm quirk for Sapphire Radeon R9 270X 2GB GDDR5
  drm/armada: avoid saving the adjusted mode to crtc->mode
  drm/armada: fix overlay when partially off-screen
  drm/armada: convert overlay to use drm_plane_helper_check_update()
  drm/armada: fix gem object free after failed prime import
  drm/armada: fix incorrect overlay plane cleanup
  ...

Calls to set_memory_wb() incure heavy TLB flush and IPI cost. To
minimize those wait until pool grow beyond batch size before
draining the pool.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-and-Tested-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Current code never allowed the page pool to actualy fill in anyway.
This fix it, so that we only start freeing page from the pool when
we go over the pool size.

Changed since v1:
  - Move the page batching optimization to its separate patch.

Changed since v2:
  - Do not remove code part of the batching optimization with
    this patch.
  - Better commit message.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull power management and ACPI fixes from Rafael Wysocki:
 "These fix two bugs in the cpufreq core (including one recent
  regression), fix a 4.0 PCI regression related to the ACPI resources
  management and quieten an RCU-related lockdep complaint about a
  tracepoint in the suspend-to-idle code.

  Specifics:

   - Fix a recently introduced issue in the cpufreq policy object
     reinitialization that leads to CPU offline/online breakage (Viresh
     Kumar)

   - Make it possible to access frequency tables of offline CPUs which
     is needed by thermal management code among other things (Viresh
     Kumar)

   - Fix an ACPI resource management regression introduced during the
     4.0 cycle that may cause incorrect resource validation results to
     appear in 32-bit x86 kernels due to silent truncation of 64-bit
     values to 32-bit (Jiang Liu)

   - Fix up an RCU-related lockdep complaint about suspicious RCU usage
     in idle caused by using a suspend tracepoint in the core suspend-
     to-idle code (Rafael J Wysocki)"

* tag 'pm+acpi-4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PCI: Fix regressions caused by resource_size_t overflow with 32-bit kernel
  cpufreq: Allow freq_table to be obtained for offline CPUs
  cpufreq: Initialize the governor again while restoring policy
  suspend-to-idle: Prevent RCU from complaining about tick_freeze()

Merge tag 'platform-drivers-x86-v4.2-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver fixes from Darren Hart:
 "Fix SMBIOS call handling and hwswitch state coherency in the
  dell-laptop driver.  Cleanups for intel_*_ipc drivers.  Details:

  dell-laptop:
   - Do not cache hwswitch state
   - Check return value of each SMBIOS call
   - Clear buffer before each SMBIOS call

  intel_scu_ipc:
   - Move local memory initialization out of a mutex

  intel_pmc_ipc:
   - Update kerneldoc formatting
   - Fix compiler casting warnings"

* tag 'platform-drivers-x86-v4.2-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  intel_scu_ipc: move local memory initialization out of a mutex
  intel_pmc_ipc: Update kerneldoc formatting
  dell-laptop: Do not cache hwswitch state
  dell-laptop: Check return value of each SMBIOS call
  dell-laptop: Clear buffer before each SMBIOS call
  intel_pmc_ipc: Fix compiler casting warnings

Pull m68knommu/coldfire fixes from Greg Ungerer:
 "Contains build fixes and updates for the ColdFire defconfigs.

  Specifically there is a couple of fixes that address problems building
  allnoconfig.  Also fix for enabling PCI bus on the M54xx family of
  ColdFire"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: enable PCI support for m5475evb defconfig
  m68k: fix io functions for ColdFire/MMU/PCI case
  m68knommu: update defconfig for ColdFire m5475evb
  m68knommu: update defconfig for ColdFire m5407c3
  m68knommu: update defconfig for ColdFire m5307c3
  m68knommu: update defconfig for ColdFire m5275evb
  m68knommu: update defconfig for ColdFire m5272c3
  m68knommu: update defconfig for ColdFire m5249evb
  m68knommu: update defconfig for m5208evb
  m68knommu: make ColdFire SoC selection a choice
  m68knommu: improve the clock configuration defaults
  m68knommu: force setting of CONFIG_CLOCK_FREQ for ColdFire

Merge branch 'drm-rockchip-2015-07-13' of https://github.com/markyzq/kernel-drm-rockchip into drm-fixes

misc rockchip fixes.

* 'drm-rockchip-2015-07-13' of https://github.com/markyzq/kernel-drm-rockchip:
  drm/rockchip: vop: remove hardware cursor window
  drm/rockchip: vop: switch cursor plane to window 3
  drm/rockchip: Drop owner assignment from platform_driver
  drm/rockchip: use drm_gem_mmap helpers
  drm/rockchip: only call drm_fb_helper_hotplug_event if fb_helper present
  drm/rockchip: Add BGR formats to VOP

imx-drm: fixes for parallel-display, imx-tve, and ipu-common

These patches fix the parallel-display driver to use the standard OF
graph bindings for connecting a drm_panel via device tree instead of
an undocumented, driver specific device tree property, take care to
disable all IPU interrupts before setting up the irq chip to fix a
kexec lockup, and fix VGA output on i.MX53-QSB boards by correcting
the media bus format set by the imx-tve driver.

* tag 'imx-drm-fixes-2015-07-14' of git://git.pengutronix.de/git/pza/linux:
  drm/imx: tve: fix media bus format for VGA output
  GPU: ipu: fix lockup caused by pending chained interrupts
  drm/imx: parallel-display: fix drm_panel support

A range of fixes for the Armada DRM driver:
- A missing wakeup could result in overlay frames being delayed, causing
  video playback to hiccup.
- Avoid unmapping a dma-buf attachment which was never mapped
- Fix the overlay when partially off the screen by switching to the
  drm_plane_helper_check_update() helper and using the calculated
  coordinates to set the start address.
- Remove an incorrect assignment to crtc->mode - which should be the
  unadjusted mode.
- Fix a missing call to drm_plane_cleanup() in the overlay code.

* 'drm-armada-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  drm/armada: avoid saving the adjusted mode to crtc->mode
  drm/armada: fix overlay when partially off-screen
  drm/armada: convert overlay to use drm_plane_helper_check_update()
  drm/armada: fix gem object free after failed prime import
  drm/armada: fix incorrect overlay plane cleanup
  drm/armada: fix missing overlay wake-up

Next batch of i915 fixes. Note that the compat32 patch here needs the drm
core one to be actually useful, I'll send you that one with a separate
drm-fixes pull request. One revert because a fix in -rc2 did break
existing userspace.

* tag 'drm-intel-fixes-2015-07-15' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Do not call intel_crtc_disable if the crtc is already disabled.
  Revert "drm/i915: Declare the swizzling unknown for L-shaped configurations"
  drm/i915: Forward all core DRM ioctls to core compat handling
  drm/i915: fix oops in primary_check_plane
  drm/i915: remove unused has_dma_mapping flag
  drm/i915: Fix missing return warning for !CONFIG_DEBUGFS
  drm/i915: avoid leaking DMA mappings
  drm/i915: Snapshot seqno of most recently submitted request.
  drm/i915: Store device pointer in contexts for late tracepoint usafe

Ok next attempt at drm-fixes pull. Big thing really is just the compat32
one for addfb2.1.

* tag 'topic/drm-fixes-2015-07-16' of git://anongit.freedesktop.org/drm-intel:
  drm: Provide compat ioctl for addfb2.1
  Documentation: drm: Fix tablulation in KMS properties table
  drm: add a check for x/y in drm_mode_setcrtc
  drm/rockchip: use drm_gem_mmap helpers

More radeon and amdgpu fixes for 4.2.  Mostly amdgpu bug fixes.

* 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu/dce8: Re-set VBLANK interrupt state when enabling a CRTC
  drm/radeon/ci: silence a harmless PCC warning
  drm/amdgpu/cz: silence some dpm debug output
  drm/amdgpu/cz: store the forced dpm level
  drm/amdgpu/cz: unforce dpm levels before forcing to low/high
  drm/amdgpu: remove bogus check in gfx8 rb setup
  drm/amdgpu: set proper index/data pair for smc regs on CZ (v2)
  drm/amdgpu: disable the IP module if early_init returns -ENOENT (v2)
  drm/amdgpu: stop context leak in the error path
  drm/amdgpu: validate the context id in the dependencies
  drm/radeon: fix user ptr race condition
  drm/radeon: Don't flush the GART TLB if rdev->gart.ptr == NULL
  drm/radeon: add a dpm quirk for Sapphire Radeon R9 270X 2GB GDDR5

Pull block fixes from Jens Axboe:
 "A collection of fixes from the last few weeks that should go into the
  current series.  This contains:

   - Various fixes for the per-blkcg policy data, fixing regressions
     since 4.1.  From Arianna and Tejun

   - Code cleanup for bcache closure macros from me.  Really just
     flushing this out, it's been sitting in another branch for months

   - FIELD_SIZEOF cleanup from Maninder Singh

   - bio integrity oops fix from Mike

   - Timeout regression fix for blk-mq from Ming Lei"

* 'for-linus' of git://git.kernel.dk/linux-block:
  blk-mq: set default timeout as 30 seconds
  NVMe: Reread partitions on metadata formats
  bcache: don't embed 'return' statements in closure macros
  blkcg: fix blkcg_policy_data allocation bug
  blkcg: implement all_blkcgs list
  blkcg: blkcg_css_alloc() should grab blkcg_pol_mutex while iterating blkcg_policy[]
  blkcg: allow blkcg_pol_mutex to be grabbed from cgroup [file] methods
  block/blk-cgroup.c: free per-blkcg data when freeing the blkcg
  block: use FIELD_SIZEOF to calculate size of a field
  bio integrity: do not assume bio_integrity_pool exists if bioset exists

Pull jfs fixes from David Kleikamp:
 "A couple trivial fixes and an error path fix"

* tag 'jfs-4.2' of git://github.com/kleikamp/linux-shaggy:
  jfs: clean up jfs_rename and fix out of order unlock
  jfs: fix indentation on if statement
  jfs: removed a prohibited space after opening parenthesis

* pm-cpuidle:
  suspend-to-idle: Prevent RCU from complaining about tick_freeze()

* pm-cpufreq:
  cpufreq: Allow freq_table to be obtained for offline CPUs
  cpufreq: Initialize the governor again while restoring policy

* acpi-resources:
  ACPI / PCI: Fix regressions caused by resource_size_t overflow with 32-bit kernel

Something (ATOM BIOS?) seems to be clobbering the LB_INTERRUPT_MASK
register while the CRTC is off, which caused e.g. glxgears or
gnome-shell to hang after a modeset.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>

This has been a source of confusion.  Make it debug only.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

So the selected forced level shows up properly in sysfs.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This is necessary to properly reset the min/max limits before
clamping them otherwise we may get improper clamping depending
on what what was the last forced level.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Always respect the harvest configuration as is.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

v2: squash in later fix
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

If we run into a part with a harvest configuration where the entire
IP block is unusable, just disable the IP block.

v2: fix logic as noted by Christian
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>

Just to make sure userspace don't send nonsense to the kernel.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>

Port of amdgpu patch 9298e52f.
Signed-off-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This can be the case when the GPU is powered off, e.g. via vgaswitcheroo
or runpm. When the GPU is powered up again, radeon_gart_table_vram_pin
flushes the TLB after setting rdev->gart.ptr to non-NULL.

Fixes panic on powering off R7xx GPUs.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61529Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=76490Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

It is reasonable to set default timeout of request as 30 seconds instead of
30000 ticks, which may be 300 seconds if HZ is 100, for example, some arm64
based systems may choose 100 HZ.
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Fixes: c76cbbcf ("blk-mq: put blk_queue_rq_timeout together in blk_mq_init_queue()"
Signed-off-by: Jens Axboe <axboe@fb.com>

pca953x interrupt controller functionality is implemented using
nested threaded IRQs which require parent_irq to be configured
properly otherwise below warning can be seen if IRQ core
will try re-schedule nested IRQ:

------------[ cut here ]------------
WARNING: CPU: 1 PID: 12 at kernel/irq/manage.c:696 irq_nested_primary_handler+0x30/0x38()
Primary handler called for nested irq 301
Modules linked in: uinput ipv6 smsc95xx usbnet mii imx2_wdt etnaviv(C) matrix_keypad matrix_keymap ar1021_i2c
CPU: 1 PID: 12 Comm: ksoftirqd/1 Tainted: G        WC    4.1.1 #9
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Backtrace:
[<c0013298>] (dump_backtrace) from [<c0013488>] (show_stack+0x20/0x24)
[<c0013468>] (show_stack) from [<c05743c4>] (dump_stack+0x70/0xc0)
[<c0574354>] (dump_stack) from [<c002b7b8>] (warn_slowpath_common+0x88/0xc0)
[<c002b730>] (warn_slowpath_common) from [<c002b8ac>] (warn_slowpath_fmt+0x40/0x48)
[<c002b870>] (warn_slowpath_fmt) from [<c0075798>] (irq_nested_primary_handler+0x30/0x38)
[<c0075768>] (irq_nested_primary_handler) from [<c0075200>] (handle_irq_event_percpu+0x70/0x2d0)
[<c0075190>] (handle_irq_event_percpu) from [<c00754ac>] (handle_irq_event+0x4c/0x6c)
[<c0075460>] (handle_irq_event) from [<c0078204>] (handle_simple_irq+0xa4/0xc8)
[<c0078160>] (handle_simple_irq) from [<c0077cd4>] (resend_irqs+0x50/0x7c)
[<c0077c84>] (resend_irqs) from [<c002f99c>] (tasklet_action+0x94/0x140)
[<c002f908>] (tasklet_action) from [<c002eea8>] (__do_softirq+0xa0/0x3c8)
[<c002ee08>] (__do_softirq) from [<c002f208>] (run_ksoftirqd+0x38/0x54)
[<c002f1d0>] (run_ksoftirqd) from [<c004b1e4>] (smpboot_thread_fn+0x1f8/0x2f0)
[<c004afec>] (smpboot_thread_fn) from [<c0047744>] (kthread+0xe8/0x104)
[<c004765c>] (kthread) from [<c000fac8>] (ret_from_fork+0x14/0x2c)
---[ end trace 96052cda48865769 ]---

The issue was reported and described in details by Lothar Waßmann and
Christian Gmeiner in https://lkml.org/lkml/2014/9/9/123.

Fix it by adding missed call of gpiochip_set_chained_irqchip()
so GPIO IRQ chip helpers will set parent_irq for nested IRQs
properly.
Reported-by: Lothar Waßmann <LW@KARO-electronics.de>
Tested-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

OMAP GPIO driver allowed to be built as loadable module, but it
doesn't set owner field in GPIO chip structure. As result,
module_get/put() API is not working and it's possible to unload
OMAP driver while in use:

  omap_gpio 48051000.gpio: REMOVING GPIOCHIP WITH GPIOS STILL REQUESTED

Hence, add missing configuration.

Cc: Tony Lindgren <tony@atomide.com>
Fixes: cac089f9 ('gpio: omap: Allow building as a loadable module')
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

In case the gpiochip doesn't have the .dev field set, as is the case
in here, it is not possible to reference this device in DT as a GPIO
controller. A good example of this problem is that gpio-leds can not
be used when connected to this chip, the gpio-leds driver bails out
with -EPROBE_DEFER.

Fix this problem by setting the .dev field of the gpio_chip to the
parent i2c device.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Mans Rullgard <mans@mansr.com>
Cc: Olaf Mandel <o.mandel@menlosystems.com>
Cc: Semen Protsenko <semen.protsenko@globallogic.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

xgpio_save_regs() is used in this driver to setup the initial
values of the registers in the hardware.

The relevant registers at that time are:
0x0 -> channel 0 data (32 bits, one for each GPIO on this channel).
0x4 -> channel 0 tri, controls in/out status for each GPIO of this channel.
0x8 -> channel 1 data
0xC -> channel 1 tri

gpio-xilinx.c defines these:
XGPIO_DATA_OFFSET   (0x0)
XGPIO_TRI_OFFSET    (0x4)
XGPIO_CHANNEL_OFFSET	0x8

Before this patch, the "data" register value of channel 1 was written
at 0x4 intead of 0x8 (overwriting the channel 0 "tri" register),
and the "tri" register value for channel 1 was written at 0x8 instead of 0xC.
Signed-off-by: Raphaël Teysseyre <rteysseyre@gmail.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Add missing pm_runtime_disabled to remove().

Error log:
root@zynqmp:~# modprobe gpio_zynq
root@zynqmp:~# lsmod
    Not tainted
gpio_zynq 7086 0 - Live 0xffffffbffc00a000
root@zynqmp:~# rmmod gpio_zynq
root@zynqmp:~# lsmod
    Not tainted
root@zynqmp:~# modprobe gpio_zynq
[  246.924438] zynq-gpio ff0a0000.gpio: Unbalanced pm_runtime_enable!
root@zynqmp:~# rmmod gpio_zynq
root@zynqmp:~# lsmod
    Not tainted
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This laptop needs GPIO4 pulled high to enable the headphone amplifier,
and has a mute LED on GPIO3. I modelled the patch on the existing
GPIO4 code which pulls the line low for the same purpose; this time,
the HP amp line is pulled high.

v2: Disable the headphone amplifier when no headphone is connected.
    Don't disable power savings to preserve the LED state.

v3: Remove headset-specific hooks and code; this is just a headphone.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add missed spin_unlock_irqrestore in omap_gpio_irq_type when
omap_set_gpio_triggering() is failed.

It fixes static checker warning:

	drivers/gpio/gpio-omap.c:523 omap_gpio_irq_type()
	warn: inconsistent returns 'spin_lock:&bank->lock'.

This fixes commit:
1562e461 ('gpio: omap: fix error handling in omap_gpio_irq_type')
Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Pull TPM bugfixes from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  tpm, tpm_crb: fail when TPM2 ACPI table contents look corrupted
  tpm: Fix initialization of the cdev