Add power domains dt-bindings for MediaTek Helio X10 (MT6795).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220503141441.125852-2-angelogioacchino.delregno@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

When building this driver for an architecture that does not support
CONFIG_PM_SLEEP, such as hexagon, the following warnings occur:

  drivers/soc/mediatek/mtk-svs.c:1481:12: error: unused function 'svs_suspend' [-Werror,-Wunused-function]
  static int svs_suspend(struct device *dev)
             ^
  drivers/soc/mediatek/mtk-svs.c:1515:12: error: unused function 'svs_resume' [-Werror,-Wunused-function]
  static int svs_resume(struct device *dev)
             ^
  2 errors generated.

This happens because SIMPLE_DEV_PM_OPS uses SET_SYSTEM_SLEEP_PM_OPS,
which evaluates to nothing when CONFIG_PM_SLEEP is not set, leaving the
functions unused in the eyes of the compiler.

This problem was rectified in commit 1a3c7bb0 ("PM: core: Add new
*_PM_OPS macros, deprecate old ones") with new macros. Use
DEFINE_SIMPLE_DEV_PM_OPS to fix the warning while not changing
svs_pm_ops when CONFIG_PM_SLEEP is set.

Fixes: 681a02e9 ("soc: mediatek: SVS: introduce MTK SVS engine")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220622175649.1856337-1-nathan@kernel.orgSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

MediaTek SoCs have multiple MFG power-domains, exclusively used for
the GPU which, in turn, requires external power supplies: make sure
to have the MTK_SCPD_DOMAIN_SUPPLY cap on the two topmost MFGs to
allow voting for regulators on/off upon usage of these power domains.

This also ensures that the SRAM is actually powered and that we're
not relying on the bootloader leaving this supply on when performing
the first (and latter) poweron sequence for these domains' sram.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220623123850.110225-2-angelogioacchino.delregno@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Fix the missing clk_disable_unprepare() before return
from svs_resume() in the error handling case.
Signed-off-by: Peng Wu <wupeng58@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Link: https://lore.kernel.org/r/20220623070240.63382-1-wupeng58@huawei.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

In commit
4e8988c6 ("soc: mediatek: add DDP_DOMPONENT_DITHER0 enum for mt8195 vdosys0")
the enum mtk_ddp_comp_id was modified to add an index number to the
DITHER component because some new SoCs have multiple dither blocks.

As a result, all of the mutex mod arrays have been changed to use the
new definition instead of the old one (even if that's retained): for
consistency purposes, follow the same trend on the newly introduced
MT8365 mutex mod array.

This commit brings no functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220620102454.131417-1-angelogioacchino.delregno@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Due to HW limitations, MDP3 is necessary to enable MUTEX in each frame
for SOF triggering and cooperate with CMDQ control to reduce the amount
of interrupts generated(also, reduce frame latency).

In response to the above situation, a new interface
"mtk_mutex_enable_by_cmdq" has been added to achieve the purpose.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://lore.kernel.org/r/20220610063424.7800-7-moudy.ho@mediatek.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

In order to allow modules with latency requirements such as MDP3
to set registers through CMDQ, add the relevant GCE property.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220610063424.7800-5-moudy.ho@mediatek.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

In order to share the same hardware information with MDP3,
change the MUTEX dt-binding to the path "soc/mediatek".
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220610063424.7800-4-moudy.ho@mediatek.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

For the purpose of module independence, related settings should be moved
from MDP to the corresponding driver.
This patch adds 8183 MUTEX MOD settings for MDP.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://lore.kernel.org/r/20220610063424.7800-3-moudy.ho@mediatek.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

In order to allow multiple modules to operate MUTEX hardware through
a common interfrace, two flexible indexes "mtk_mutex_mod_index" and
"mtk_mutex_sof_index" need to be added to replace original component
ID so that like DDP and MDP can add their own MOD table or SOF
settings independently.

In addition, 2 generic interface "mtk_mutex_write_mod" and
"mtk_mutex_write_sof" have been added, which is expected to replace
the "mtk_mutex_add_comp" and "mtk_mutex_remove_comp" pair originally
dedicated to DDP in the future.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://lore.kernel.org/r/20220610063424.7800-2-moudy.ho@mediatek.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

There is a t-phy shared by PCIe and USB3 on mt8195, if the t-phy is
used by PCIe, when power off its mtcmos, need software reset it
(workaround way, usually hardware do it, but has an issue on mt8195),
but it has side effect to USB2 phy(works with USB3 phy to support
USB3.2 Gen1), so add support GENPD_FLAG_ALWAYS_ON flag, and make its
power always on.
Another reason is that USB3.2 Gen1/2 need keep power always on when
support runtime-pm due to hardware limitation until now.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220617095841.23031-1-chunfeng.yun@mediatek.com
[mb: smaller nit fixes on commit message]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Right now only the DSI path connections are described in the mt8365
mmsys driver. The external path will be DPI/HDMI. This commit adds
the connections for DPI/HDMI.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://lore.kernel.org/r/20220530201436.902505-5-fparent@baylibre.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add mutex support for MT8365 SoC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://lore.kernel.org/r/20220530201436.902505-4-fparent@baylibre.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

mt8192 SVS GPU uses 2-line (high/low bank) HW architecture to provide
bank voltages. High bank helps update higher frequency's voltage
and low bank helps update lower frequency's voltage.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20220516004311.18358-8-roger.lu@mediatek.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add mt8192 svs compatible/resets in dt-bindings.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20220516004311.18358-7-roger.lu@mediatek.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

The purpose of SVS is to help find the suitable voltages
for DVFS. Therefore, if SVS bank voltages are concerned
to be wrong, we can show/disable SVS bank voltages by
this patch.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20220516004311.18358-6-roger.lu@mediatek.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

SVS monitor mode is based on different thermal temperature
to provide suitable SVS bank voltages.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20220516004311.18358-5-roger.lu@mediatek.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

The Smart Voltage Scaling(SVS) engine is a piece of hardware
which calculates suitable SVS bank voltages to OPP voltage table.
Then, DVFS driver could apply those SVS bank voltages to PMIC/Buck
when receiving OPP_EVENT_ADJUST_VOLTAGE.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20220516004311.18358-4-roger.lu@mediatek.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Document the binding for enabling mtk svs on MediaTek SoC.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20220516004311.18358-2-roger.lu@mediatek.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add devapc data and compatible to support MT8186 devapc.
Signed-off-by: Runyang Chen <runyang.chen@mediatek.com>
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220504115501.3490-4-rex-bc.chen@mediatek.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

The register offsets is the same between MT6779 and MT8186. To reuse the
register offsets, we move these register offsets to another structure
"mtk_devapc_regs_ofs".
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220504115501.3490-3-rex-bc.chen@mediatek.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add the dt-binding to support MT8186 devapc.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220504115501.3490-2-rex-bc.chen@mediatek.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Compress each entry of the of_device_id tables in this driver to one
line instead of three, as they fit just fine in a single line.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220517104712.24579-6-angelogioacchino.delregno@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

In the PMIC Wrapper driver each PMIC has its own regmap configuration
and its own pwrap_{read/write}() callbacks, but it's just about either
a 32 bits vs 16 bits register, and only one of them uses 32bits regs:
this means that the same ops are assigned over and over again to all
of the supported PMICs.

It is therefore possible to avoid reassigning the same things over
and over, reducing the amount of lines, without any impact on human
readability of this driver: add a pwrap_slv_regops structure and
move the callbacks and regmap_config pointer in there instead.
This allows to assign just one pointer to that shared data in the
per-pmic struct pwrap_slv_type.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220517104712.24579-5-angelogioacchino.delregno@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Check for the return value of platform_get_irq(): if no interrupt
is specified, it wouldn't make sense to call devm_request_irq().
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220517104712.24579-4-angelogioacchino.delregno@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

In order to simplify ioremapping resources, instead of calling
platform_get_resource_byname() and then devm_ioremap_resource(),
simply call devm_platform_ioremap_resource_byname().
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220517104712.24579-3-angelogioacchino.delregno@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Function pwrap_wait_for_state() is a function that polls an address
through a helper function, but this is the very same operation that
the readx_poll_timeout macro means to do.
Convert all instances of calling pwrap_wait_for_state() to instead
use the read_poll_timeout macro.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220517104712.24579-2-angelogioacchino.delregno@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Pull file descriptor fix from Al Viro:
 "Fix for breakage in #work.fd this window"

* tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix the breakage in close_fd_get_file() calling conventions change

Pull mm hotfixes from Andrew Morton:
 "Fixups for various recently-added and longer-term issues and a few
  minor tweaks:

   - fixes for material merged during this merge window

   - cc:stable fixes for more longstanding issues

   - minor mailmap and MAINTAINERS updates"

* tag 'mm-hotfixes-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/oom_kill.c: fix vm_oom_kill_table[] ifdeffery
  x86/kexec: fix memory leak of elf header buffer
  mm/memremap: fix missing call to untrack_pfn() in pagemap_range()
  mm: page_isolation: use compound_nr() correctly in isolate_single_pageblock()
  mm: hugetlb_vmemmap: fix CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON
  MAINTAINERS: add maintainer information for z3fold
  mailmap: update Josh Poimboeuf's email

Pull delay-accounting update from Andrew Morton:
 "A single featurette for delay accounting.

  Delayed a bit because, unusually, it had dependencies on both the
  mm-stable and mm-nonmm-stable queues"

* tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  delayacct: track delays from write-protect copy

The bluetooth code uses our bitmap infrastructure for the two bits (!)
of connection setup flags, and in the process causes odd problems when
it converts between a bitmap and just the regular values of said bits.

It's completely pointless to do things like bitmap_to_arr32() to convert
a bitmap into a u32.  It shoudln't have been a bitmap in the first
place.  The reason to use bitmaps is if you have arbitrary number of
bits you want to manage (not two!), or if you rely on the atomicity
guarantees of the bitmap setting and clearing.

The code could use an "atomic_t" and use "atomic_or/andnot()" to set and
clear the bit values, but considering that it then copies the bitmaps
around with "bitmap_to_arr32()" and friends, there clearly cannot be a
lot of atomicity requirements.

So just use a regular integer.

In the process, this avoids the warnings about erroneous use of
bitmap_from_u64() which were triggered on 32-bit architectures when
conversion from a u64 would access two words (and, surprise, surprise,
only one word is needed - and indeed overkill - for a 2-bit bitmap).

That was always problematic, but the compiler seems to notice it and
warn about the invalid pattern only after commit 0a97953f ("lib: add
bitmap_{from,to}_arr64") changed the exact implementation details of
'bitmap_from_u64()', as reported by Sudip Mukherjee and Stephen Rothwell.

Fixes: fe92ee64 ("Bluetooth: hci_core: Rework hci_conn_params flags")
Link: https://lore.kernel.org/all/YpyJ9qTNHJzz0FHY@debian/
Link: https://lore.kernel.org/all/20220606080631.0c3014f2@canb.auug.org.au/
Link: https://lore.kernel.org/all/20220605162537.1604762-1-yury.norov@gmail.com/Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It used to grab an extra reference to struct file rather than
just transferring to caller the one it had removed from descriptor
table.  New variant doesn't, and callers need to be adjusted.

Reported-and-tested-by: syzbot+47dd250f527cb7bebf24@syzkaller.appspotmail.com
Fixes: 6319194e ("Unify the primitives for file descriptor closing")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull x86 SGX fix from Thomas Gleixner:
 "A single fix for x86/SGX to prevent that memory which is allocated for
  an SGX enclave is accounted to the wrong memory control group"

* tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sgx: Set active memcg prior to shmem allocation

Pull x86 mm cleanup from Thomas Gleixner:
 "Use PAGE_ALIGNED() instead of open coding it in the x86/mm code"

* tag 'x86-mm-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Use PAGE_ALIGNED(x) instead of IS_ALIGNED(x, PAGE_SIZE)

Pull x86 microcode updates from Thomas Gleixner:

 - Disable late microcode loading by default. Unless the HW people get
   their act together and provide a required minimum version in the
   microcode header for making a halfways informed decision its just
   lottery and broken.

 - Warn and taint the kernel when microcode is loaded late

 - Remove the old unused microcode loader interface

 - Remove a redundant perf callback from the microcode loader

* tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Remove unnecessary perf callback
  x86/microcode: Taint and warn on late loading
  x86/microcode: Default-disable late loading
  x86/microcode: Rip out the OLD_INTERFACE

Pull x86 cleanups from Thomas Gleixner:
 "A set of small x86 cleanups:

   - Remove unused headers in the IDT code

   - Kconfig indendation and comment fixes

   - Fix all 'the the' typos in one go instead of waiting for bots to
     fix one at a time"

* tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Fix all occurences of the "the the" typo
  x86/idt: Remove unused headers
  x86/Kconfig: Fix indentation of arch/x86/Kconfig.debug
  x86/Kconfig: Fix indentation and add endif comments to arch/x86/Kconfig

Pull x86 boot update from Thomas Gleixner:
 "Use strlcpy() instead of strscpy() in arch_setup()"

* tag 'x86-boot-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/setup: Use strscpy() to replace deprecated strlcpy()

Pull clockevent/clocksource updates from Thomas Gleixner:

 - Device tree bindings for MT8186

 - Tell the kernel that the RISC-V SBI timer stops in deeper power
   states

 - Make device tree parsing in sp804 more robust

 - Dead code removal and tiny fixes here and there

 - Add the missing SPDX identifiers

* tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value
  clocksource/drivers/timer-ti-dm: Remove unnecessary NULL check
  clocksource/drivers/timer-sun5i: Convert to SPDX identifier
  clocksource/drivers/timer-sun4i: Convert to SPDX identifier
  clocksource/drivers/pistachio: Convert to SPDX identifier
  clocksource/drivers/orion: Convert to SPDX identifier
  clocksource/drivers/lpc32xx: Convert to SPDX identifier
  clocksource/drivers/digicolor: Convert to SPDX identifier
  clocksource/drivers/armada-370-xp: Convert to SPDX identifier
  clocksource/drivers/mips-gic-timer: Convert to SPDX identifier
  clocksource/drivers/jcore: Convert to SPDX identifier
  clocksource/drivers/bcm_kona: Convert to SPDX identifier
  clocksource/drivers/sp804: Avoid error on multiple instances
  clocksource/drivers/riscv: Events are stopped during CPU suspend
  clocksource/drivers/ixp4xx: Drop boardfile probe path
  dt-bindings: timer: Add compatible for Mediatek MT8186

Pull scheduler fix from Thomas Gleixner:
 "Fix the fallout of sysctl code move which placed the init function
  wrong"

* tag 'sched-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/autogroup: Fix sysctl move