* for-next/feat_lse128:
  : HWCAP for FEAT_LSE128
  kselftest/arm64: add FEAT_LSE128 to hwcap test
  arm64: add FEAT_LSE128 HWCAP

* for-next/feat_lrcpc3:
  : HWCAP for FEAT_LRCPC3
  selftests/arm64: add HWCAP2_LRCPC3 test
  arm64: add FEAT_LRCPC3 HWCAP

* for-next/feat_sve_b16b16:
  : Add support for FEAT_SVE_B16B16 (BFloat16)
  kselftest/arm64: Verify HWCAP2_SVE_B16B16
  arm64/sve: Report FEAT_SVE_B16B16 to userspace

Merge branches 'for-next/sve-remove-pseudo-regs', 'for-next/backtrace-ipi', 'for-next/kselftest', 'for-next/misc' and 'for-next/cpufeat-display-cores', remote-tracking branch 'arm64/for-next/perf' into for-next/core

* arm64/for-next/perf:
  perf: hisi: Fix use-after-free when register pmu fails
  drivers/perf: hisi_pcie: Initialize event->cpu only on success
  drivers/perf: hisi_pcie: Check the type first in pmu::event_init()
  perf/arm-cmn: Enable per-DTC counter allocation
  perf/arm-cmn: Rework DTC counters (again)
  perf/arm-cmn: Fix DTC domain detection
  drivers: perf: arm_pmuv3: Drop some unused arguments from armv8_pmu_init()
  drivers: perf: arm_pmuv3: Read PMMIR_EL1 unconditionally
  drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process
  drivers/perf: xgene: Use device_get_match_data()
  perf/amlogic: add missing MODULE_DEVICE_TABLE
  docs/perf: Add ampere_cspmu to toctree to fix a build warning
  perf: arm_cspmu: ampere_cspmu: Add support for Ampere SoC PMU
  perf: arm_cspmu: Support implementation specific validation
  perf: arm_cspmu: Support implementation specific filters
  perf: arm_cspmu: Split 64-bit write to 32-bit writes
  perf: arm_cspmu: Separate Arm and vendor module

* for-next/sve-remove-pseudo-regs:
  : arm64/fpsimd: Remove the vector length pseudo registers
  arm64/sve: Remove SMCR pseudo register from cpufeature code
  arm64/sve: Remove ZCR pseudo register from cpufeature code

* for-next/backtrace-ipi:
  : Add IPI for backtraces/kgdb, use NMI
  arm64: smp: Don't directly call arch_smp_send_reschedule() for wakeup
  arm64: smp: avoid NMI IPIs with broken MediaTek FW
  arm64: smp: Mark IPI globals as __ro_after_init
  arm64: kgdb: Implement kgdb_roundup_cpus() to enable pseudo-NMI roundup
  arm64: smp: IPI_CPU_STOP and IPI_CPU_CRASH_STOP should try for NMI
  arm64: smp: Add arch support for backtrace using pseudo-NMI
  arm64: smp: Remove dedicated wakeup IPI
  arm64: idle: Tag the arm64 idle functions as __cpuidle
  irqchip/gic-v3: Enable support for SGIs to act as NMIs

* for-next/kselftest:
  : Various arm64 kselftest updates
  kselftest/arm64: Validate SVCR in streaming SVE stress test

* for-next/misc:
  : Miscellaneous patches
  arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer
  arm64: module: Fix PLT counting when CONFIG_RANDOMIZE_BASE=n
  arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a helper
  clocksource/drivers/arm_arch_timer: limit XGene-1 workaround
  arm64: Remove system_uses_lse_atomics()
  arm64: Mark the 'addr' argument to set_ptes() and __set_pte_at() as unused
  arm64/mm: Hoist synchronization out of set_ptes() loop
  arm64: swiotlb: Reduce the default size if no ZONE_DMA bouncing needed

* for-next/cpufeat-display-cores:
  : arm64 cpufeature display enabled cores
  arm64: cpufeature: Change DBM to display enabled cores
  arm64: cpufeature: Display the set of cores with a feature

Prior to LLVM 15.0.0, LLVM's integrated assembler would incorrectly
byte-swap NOP when compiling for big-endian, and the resulting series of
bytes happened to match the encoding of FNMADD S21, S30, S0, S0.

This went unnoticed until commit:

  34f66c4c ("arm64: Use a positive cpucap for FP/SIMD")

Prior to that commit, the kernel would always enable the use of FPSIMD
early in boot when __cpu_setup() initialized CPACR_EL1, and so usage of
FNMADD within the kernel was not detected, but could result in the
corruption of user or kernel FPSIMD state.

After that commit, the instructions happen to trap during boot prior to
FPSIMD being detected and enabled, e.g.

| Unhandled 64-bit el1h sync exception on CPU0, ESR 0x000000001fe00000 -- ASIMD
| CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c #1
| Hardware name: linux,dummy-virt (DT)
| pstate: 400000c9 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : __pi_strcmp+0x1c/0x150
| lr : populate_properties+0xe4/0x254
| sp : ffffd014173d3ad0
| x29: ffffd014173d3af0 x28: fffffbfffddffcb8 x27: 0000000000000000
| x26: 0000000000000058 x25: fffffbfffddfe054 x24: 0000000000000008
| x23: fffffbfffddfe000 x22: fffffbfffddfe000 x21: fffffbfffddfe044
| x20: ffffd014173d3b70 x19: 0000000000000001 x18: 0000000000000005
| x17: 0000000000000010 x16: 0000000000000000 x15: 00000000413e7000
| x14: 0000000000000000 x13: 0000000000001bcc x12: 0000000000000000
| x11: 00000000d00dfeed x10: ffffd414193f2cd0 x9 : 0000000000000000
| x8 : 0101010101010101 x7 : ffffffffffffffc0 x6 : 0000000000000000
| x5 : 0000000000000000 x4 : 0101010101010101 x3 : 000000000000002a
| x2 : 0000000000000001 x1 : ffffd014171f2988 x0 : fffffbfffddffcb8
| Kernel panic - not syncing: Unhandled exception
| CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c #1
| Hardware name: linux,dummy-virt (DT)
| Call trace:
|  dump_backtrace+0xec/0x108
|  show_stack+0x18/0x2c
|  dump_stack_lvl+0x50/0x68
|  dump_stack+0x18/0x24
|  panic+0x13c/0x340
|  el1t_64_irq_handler+0x0/0x1c
|  el1_abort+0x0/0x5c
|  el1h_64_sync+0x64/0x68
|  __pi_strcmp+0x1c/0x150
|  unflatten_dt_nodes+0x1e8/0x2d8
|  __unflatten_device_tree+0x5c/0x15c
|  unflatten_device_tree+0x38/0x50
|  setup_arch+0x164/0x1e0
|  start_kernel+0x64/0x38c
|  __primary_switched+0xbc/0xc4

Restrict CONFIG_CPU_BIG_ENDIAN to a known good assembler, which is
either GNU as or LLVM's IAS 15.0.0 and newer, which contains the linked
commit.

Closes: https://github.com/ClangBuiltLinux/linux/issues/1948
Link: https://github.com/llvm/llvm-project/commit/1379b150991f70a5782e9a143c2ba5308da1161cSigned-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: stable@vger.kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20231025-disable-arm64-be-ias-b4-llvm-15-v1-1-b25263ed8b23@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

The counting of module PLTs has been broken when CONFIG_RANDOMIZE_BASE=n
since commit:

  3e35d303 ("arm64: module: rework module VA range selection")

Prior to that commit, when CONFIG_RANDOMIZE_BASE=n, the kernel image and
all modules were placed within a 128M region, and no PLTs were necessary
for B or BL. Hence count_plts() and partition_branch_plt_relas() skipped
handling B and BL when CONFIG_RANDOMIZE_BASE=n.

After that commit, modules can be placed anywhere within a 2G window
regardless of CONFIG_RANDOMIZE_BASE, and hence PLTs may be necessary for
B and BL even when CONFIG_RANDOMIZE_BASE=n. Unfortunately that commit
failed to update count_plts() and partition_branch_plt_relas()
accordingly.

Due to this, module_emit_plt_entry() may fail if an insufficient number
of PLT entries have been reserved, resulting in modules failing to load
with -ENOEXEC.

Fix this by counting PLTs regardless of CONFIG_RANDOMIZE_BASE in
count_plts() and partition_branch_plt_relas().

Fixes: 3e35d303 ("arm64: module: rework module VA range selection")
Signed-off-by: Maria Yu <quic_aiquny@quicinc.com>
Cc: <stable@vger.kernel.org> # 6.5.x
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Fixes: 3e35d303 ("arm64: module: rework module VA range selection")
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20231024010954.6768-1-quic_aiquny@quicinc.comSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

ACPI, irqchip and the architecture code all inspect the MADT
enabled bit for a GICC entry in the MADT.

The addition of an 'online capable' bit means all these sites need
updating.

Move the current checks behind a helper to make future updates easier.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Acked-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/E1quv5D-00AeNJ-U8@rmk-PC.armlinux.org.ukSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

When we fail to register the uncore pmu, the pmu context may not been
allocated. The error handing will call cpuhp_state_remove_instance()
to call uncore pmu offline callback, which migrate the pmu context.
Since that's liable to lead to some kind of use-after-free.

Use cpuhp_state_remove_instance_nocalls() instead of
cpuhp_state_remove_instance() so that the notifiers don't execute after
the PMU device has been failed to register.

Fixes: a0ab25cd ("drivers/perf: hisi: Add support for HiSilicon PA PMU driver")
FIxes: 3bf30882 ("drivers/perf: hisi: Add support for HiSilicon SLLC PMU driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Link: https://lore.kernel.org/r/20231024113630.13472-1-hejunhao3@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Initialize the event->cpu only on success. To be more reasonable
and keep consistent with other PMUs.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20231024092954.42297-3-yangyicong@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Check whether the event type matches the PMU type firstly in
pmu::event_init() before touching the event. Otherwise we'll
change the events of others and lead to incorrect results.
Since in perf_init_event() we may call every pmu's event_init()
in a certain case, we should not modify the event if it's not
ours.

Fixes: 8404b0fb ("drivers/perf: hisi: Add driver for HiSilicon PCIe PMU")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20231024092954.42297-2-yangyicong@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Now that we have the ability to display the list of cores
with a feature when its selectivly enabled, lets convert
DBM to use that as well.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Link: https://lore.kernel.org/r/20231017052322.1211099-3-jeremy.linton@arm.comSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

The AMU feature can be enabled on a subset of the cores in a system.
Because of that, it prints a message for each core as it is detected.
This becomes tedious when there are hundreds of cores. Instead, for
CPU features which can be enabled on a subset of the present cores,
lets wait until update_cpu_capabilities() and print the subset of cores
the feature was enabled on.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
Tested-by: Punit Agrawal <punit.agrawal@bytedance.com>
Link: https://lore.kernel.org/r/20231017052322.1211099-2-jeremy.linton@arm.comSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Finally enable independent per-DTC-domain counter allocation, except on
CMN-600 where we still need to cope with not knowing the domain topology
and thus keep counter indices sychronised across domains. This allows
users to simultaneously count up to 8 targeted events per domain, rather
than 8 globally, for up to 4x wider coverage on maximum configurations.

Even though this now looks deceptively simple, I stand by my previous
assertion that it was a flippin' nightmare to implement; all the real
head-scratchers are hidden in the foundations in the previous patch...
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/849f65566582cb102c6d0843d0f26e231180f8ac.1697824215.git.robin.murphy@arm.comSigned-off-by: Will Deacon <will@kernel.org>

The bitmap-based scheme for tracking DTC counter usage turns out to be a
complete dead-end for its imagined purpose, since by the time we have to
keep track of a per-DTC counter index anyway, we already have enough
information to make the bitmap itself redundant. Revert the remains of
it back to almost the original scheme, but now expanded to track per-DTC
indices, in preparation for making use of them in anger.

Note that since cycle count events always use a dedicated counter on a
single DTC, we reuse the field to encode their DTC index directly.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/5f6ade76b47f033836d7a36c03555da896dfb4a3.1697824215.git.robin.murphy@arm.comSigned-off-by: Will Deacon <will@kernel.org>

It transpires that dtm_unit_info is another register which got shuffled
in CMN-700 without me noticing. Fix that in a way which also proactively
fixes the fragile laziness of its consumer, just in case any further
fields ever get added alongside dtc_domain.

Fixes: 23760a01 ("perf/arm-cmn: Add CMN-700 support")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/3076ee83d0554f6939fbb6ee49ab2bdb28d8c7ee.1697824215.git.robin.murphy@arm.comSigned-off-by: Will Deacon <will@kernel.org>

All the PMU init functions want the default sysfs attribute groups, and so
these all call armv8_pmu_init_nogroups() helper, with none of them calling
armv8_pmu_init() directly. When we introduced armv8_pmu_init_nogroups() in
the commit e424b179 ("arm64: perf: Refactor PMU init callbacks")

 ... we thought that we might need custom attribute groups in future, but
as we evidently haven't, we can remove the option.

This patch folds armv8_pmu_init_nogroups() into armv8_pmu_init(), removing
the ability to use custom attribute groups and simplifying the code.

CC: James Clark <james.clark@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20231016025436.1368945-1-anshuman.khandual@arm.comSigned-off-by: Will Deacon <will@kernel.org>

Currently the PMUv3 driver only reads PMMIR_EL1 if the PMU implements
FEAT_PMUv3p4 and the STALL_SLOT event, but the check for STALL_SLOT event
isn't necessary and can be removed.

The check for STALL_SLOT event was introduced with the read of PMMIR_EL1 in
commit f5be3a61 ("arm64: perf: Add support caps under sysfs")

When this logic was written, the ARM ARM said:

| If STALL_SLOT is not implemented, it is IMPLEMENTATION DEFINED whether
| the PMMIR System registers are implemented.

... and thus the driver had to check for STALL_SLOT event to verify that
PMMIR_EL1 was implemented and accesses to PMMIR_EL1 would not be UNDEFINED.

Subsequently, the architecture was retrospectively tightened to require
that any FEAT_PMUv3p4 implementation implements PMMIR_EL1. Since the G.b
release of the ARM ARM, the wording regarding STALL_SLOT event has been
removed, and the description of PMMIR_EL1 says:

| This register is present only when FEAT_PMUv3p4 is implemented.

Drop the unnecessary check for STALL_SLOT event when reading PMMIR_EL1.

Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20231013024354.1289070-1-anshuman.khandual@arm.comSigned-off-by: Will Deacon <will@kernel.org>

When tearing down a 'hisi_hns3' PMU, we mistakenly run the CPU hotplug
callbacks after the device has been unregistered, leading to fireworks
when we try to execute empty function callbacks within the driver:

  | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
  | CPU: 0 PID: 15 Comm: cpuhp/0 Tainted: G        W  O      5.12.0-rc4+ #1
  | Hardware name:  , BIOS KpxxxFPGA 1P B600 V143 04/22/2021
  | pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--)
  | pc : perf_pmu_migrate_context+0x98/0x38c
  | lr : perf_pmu_migrate_context+0x94/0x38c
  |
  | Call trace:
  |  perf_pmu_migrate_context+0x98/0x38c
  |  hisi_hns3_pmu_offline_cpu+0x104/0x12c [hisi_hns3_pmu]

Use cpuhp_state_remove_instance_nocalls() instead of
cpuhp_state_remove_instance() so that the notifiers don't execute after
the PMU device has been unregistered.

Fixes: 66637ab1 ("drivers/perf: hisi: add driver for HNS3 PMU")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20231019091352.998964-1-shaojijie@huawei.com
[will: Rewrote commit message]
Signed-off-by: Will Deacon <will@kernel.org>

The AppliedMicro XGene-1 CPU has an erratum where the timer condition
would only consider TVAL, not CVAL. We currently apply a workaround when
seeing the PartNum field of MIDR_EL1 being 0x000, under the assumption
that this would match only the XGene-1 CPU model.
However even the Ampere eMAG (aka XGene-3) uses that same part number, and
only differs in the "Variant" and "Revision" fields: XGene-1's MIDR is
0x500f0000, our eMAG reports 0x503f0002. Experiments show the latter
doesn't show the faulty behaviour.

Increase the specificity of the check to only consider partnum 0x000 and
variant 0x00, to exclude the Ampere eMAG.

Fixes: 012f1885 ("clocksource/drivers/arm_arch_timer: Work around broken CVAL implementations")
Reported-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20231016153127.116101-1-andre.przywara@arm.comSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

There are two variants of system_uses_lse_atomics(), depending on
CONFIG_ARM64_LSE_ATOMICS. The function isn't called anywhere when
CONFIG_ARM64_LSE_ATOMICS is disabled. It can be directly replaced
by alternative_has_cap_likely(ARM64_HAS_LSE_ATOMICS) when the kernel
option is enabled.

No need to keep system_uses_lse_atomics() and just remove it.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20231017005036.334067-1-gshan@redhat.comSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

This argument is not used by the arm64 implementation. Mark it as
__always_unused and also remove the unnecessary 'addr' increment in
set_ptes().
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310140531.BQQwt3NQ-lkp@intel.com/
Cc: Will Deacon <will@kernel.org>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/ZS6EvMiJ0QF5INkv@arm.com

Use preferred device_get_match_data() instead of of_match_device() and
acpi_match_device() to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20231009172923.2457844-14-robh@kernel.orgSigned-off-by: Will Deacon <will@kernel.org>

Add missing MODULE_DEVICE_TABLE macro to let this driver to be
automatically loaded as module.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231012103543.3381326-1-m.szyprowski@samsung.comSigned-off-by: Will Deacon <will@kernel.org>

set_ptes() sets a physically contiguous block of memory (which all
belongs to the same folio) to a contiguous block of ptes. The arm64
implementation of this previously just looped, operating on each
individual pte. But the __sync_icache_dcache() and mte_sync_tags()
operations can both be hoisted out of the loop so that they are
performed once for the contiguous set of pages (which may be less than
the whole folio). This should result in minor performance gains.

__sync_icache_dcache() already acts on the whole folio, and sets a flag
in the folio so that it skips duplicate calls. But by hoisting the call,
all the pte testing is done only once.

mte_sync_tags() operates on each individual page with its own loop. But
by passing the number of pages explicitly, we can rely solely on its
loop and do the checks only once. This approach also makes it robust for
the future, rather than assuming if a head page of a compound page is
being mapped, then the whole compound page is being mapped, instead we
explicitly know how many pages are being mapped. The old assumption may
not continue to hold once the "anonymous large folios" feature is
merged.
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20231005140730.2191134-1-ryan.roberts@arm.comSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Add test of a 128-bit atomic instruction for FEAT_LSE128.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20231003124544.858804-3-joey.gouly@arm.com
[catalin.marinas@arm.com: reordered lse128_sigill() alphabetically]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Add HWCAP for FEAT_LSE128 (128-bit Atomic instructions).
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20231003124544.858804-2-joey.gouly@arm.comSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Add a test for the newly added HWCAP2_LRCPC3.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230919162757.2707023-3-joey.gouly@arm.comSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

FEAT_LRCPC3 adds more instructions to support the Release Consistency model.
Add a HWCAP so that userspace can make decisions about instructions it can use.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230919162757.2707023-2-joey.gouly@arm.com
[catalin.marinas@arm.com: change the HWCAP number]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

With CONFIG_DMA_BOUNCE_UNALIGNED_KMALLOC enabled, the arm64 kernel still
allocates the default SWIOTLB buffer (64MB) even if ZONE_DMA is disabled
or all the RAM fits into this zone. However, this potentially wastes a
non-negligible amount of memory on platforms with little RAM.

Reduce the SWIOTLB size to 1MB per 1GB of RAM if only needed for
kmalloc() buffer bouncing.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Suggested-by: Ross Burton <ross.burton@arm.com>
Cc: Ross Burton <ross.burton@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>

Add ampere_cspmu to toctree in order to address the following warning
produced when building documents:

	Documentation/admin-guide/perf/ampere_cspmu.rst: WARNING: document isn't included in any toctree
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20231011172250.5a6498e5@canb.auug.org.au/
Fixes: 53a810ad ("perf: arm_cspmu: ampere_cspmu: Add support for Ampere SoC PMU")
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20231012074103.3772114-1-ilkka@os.amperecomputing.comSigned-off-by: Will Deacon <will@kernel.org>

Ampere SoC PMU follows CoreSight PMU architecture. It uses implementation
specific registers to filter events rather than PMEVFILTnR registers.
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20230913233941.9814-5-ilkka@os.amperecomputing.com
[will: Include linux/io.h in ampere_cspmu.c for writel()]
Signed-off-by: Will Deacon <will@kernel.org>

In commit 2b2d0a7a ("arm64: smp: Remove dedicated wakeup IPI") we
started using a scheduler IPI to avoid a dedicated reschedule. When we
did this, we used arch_smp_send_reschedule() directly rather than
calling smp_send_reschedule(). The only difference is that calling
arch_smp_send_reschedule() directly avoids tracing. Presumably we
_don't_ want to avoid tracing here, so switch to
smp_send_reschedule().

Fixes: 2b2d0a7a ("arm64: smp: Remove dedicated wakeup IPI")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Some MediaTek devices have broken firmware which corrupts some GICR
registers behind the back of the OS, and pseudo-NMIs cannot be used on
these devices. For more details see commit:

  44bd78dd ("irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issues")

We did not take this problem into account in commit:

  331a1b3a ("arm64: smp: Add arch support for backtrace using pseudo-NMI")

Since that commit arm64's SMP code will try to setup some IPIs as
pseudo-NMIs, even on systems with broken FW. The GICv3 code will
(rightly) reject attempts to request interrupts as pseudo-NMIs,
resulting in boot-time failures.

Avoid the problem by taking the broken FW into account when deciding to
request IPIs as pseudo-NMIs. The GICv3 driver maintains a static_key
named "supports_pseudo_nmis" which is false on systems with broken FW,
and we can consult this within ipi_should_be_nmi().

Fixes: 331a1b3a ("arm64: smp: Add arch support for backtrace using pseudo-NMI")
Reported-by: Chen-Yu Tsai <wenst@chromium.org>
Closes: https://issuetracker.google.com/issues/197061987#comment68Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Some platforms may use e.g. different filtering mechanism and, thus,
may need different way to validate the events and group.
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230913233941.9814-4-ilkka@os.amperecomputing.comSigned-off-by: Will Deacon <will@kernel.org>

ARM Coresight PMU architecture specification [1] defines PMEVTYPER and
PMEVFILT* registers as optional in Chapter 2.1. Moreover, implementers may
choose to use PMIMPDEF* registers (offset: 0xD80-> 0xDFF) to filter the
events. Add support for those by adding implementation specific filter
callback function.

[1] https://developer.arm.com/documentation/ihi0091/latestSigned-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: Besar Wicaksono <bwicaksono@nvidia.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230913233941.9814-3-ilkka@os.amperecomputing.comSigned-off-by: Will Deacon <will@kernel.org>

Split the 64-bit register accesses if 64-bit access is not supported
by the PMU.
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: Besar Wicaksono <bwicaksono@nvidia.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230913233941.9814-2-ilkka@os.amperecomputing.comSigned-off-by: Will Deacon <will@kernel.org>

Arm Coresight PMU driver consists of main standard code and
vendor backend code. Both are currently built as a single module.
This patch adds vendor registration API to separate the two to
keep things modular. The main driver requests each known backend
module during initialization and defer device binding process.
The backend module then registers an init callback to the main
driver and continue the device driver binding process.
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20230821231608.50911-1-bwicaksono@nvidia.comSigned-off-by: Will Deacon <will@kernel.org>

Validate that SVE B16B16 support is reported correctly and consistently to
userspace.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230915-arm64-zfr-b16b16-el0-v1-2-f9aba807bdb5@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

SVE 2.1 introduced a new feature FEAT_SVE_B16B16 which adds instructions
supporting the BFloat16 floating point format. Report this to userspace
through the ID registers and hwcap.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230915-arm64-zfr-b16b16-el0-v1-1-f9aba807bdb5@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

In the ZA and ZT test programs we explicitly validate that PSTATE.ZA is as
expected on each loop but we do not do the equivalent for our streaming
SVE test, add a check that we are still in streaming mode on every loop
in case that goes wrong.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230922-arm64-ssve-validate-svcr-v1-1-f518960eaeda@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>