- 01 Feb, 2022 4 commits
-
-
Douglas Anderson authored
This reverts commit 363c4c38. Since the point of this attribute is for a test, this should be done in debugfs, not sysfs. Let's revert and a new patch can be added later doing it in debugfs. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220201092152.1.Ibc65ec6fa05017e9856ba9ef557310268429c3ce@changeid
-
Douglas Anderson authored
Recently we added generic "edp-panel"s probed by EDID. To support panels in this way we look at the panel ID in the EDID and look up the panel in a table that has power sequence timings. If we find a panel that's not in the table we will still attempt to use it but we'll use conservative timings. While it's likely that these conservative timings will work for most nearly all panels, the performance of turning the panel off and on suffers. We'd like to be able to reliably detect the case that we're using the hardcoded timings without relying on parsing dmesg. This allows us to implement tests that ensure that no devices get shipped that are relying on the conservative timings. Let's add a new sysfs entry to panel devices. It will have one of: * UNKNOWN - We tried to detect a panel but it wasn't in our table. * HARDCODED - We're not using generic "edp-panel" probed by EDID. * A panel name - This is the name of the panel from our table. Signed-off-by:
-
Allen Chen authored
This adds support for the iTE IT6505. This device can convert DPI signal to DP output. From: Allen Chen <allen.chen@ite.com.tw> Tested-by:
Hsin-yi Wang <hsinyi@chromium.org> Signed-off-by:
Hermes Wu <hermes.wu@ite.com.tw> Signed-off-by:
Allen Chen <allen.chen@ite.com.tw> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220114091502.333083-1-allen.chen@ite.com.tw
-
Yongzhi Liu authored
[why] Unlock is needed on the error handling path to prevent dead lock. v3d_submit_cl_ioctl and v3d_submit_csd_ioctl is missing unlock. [how] Fix this by changing goto target on the error handling path. So changing the goto to target an error handling path that includes drm_gem_unlock reservations. Signed-off-by:
Yongzhi Liu <lyz_cs@pku.edu.cn> Reviewed-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/1643377262-109975-1-git-send-email-lyz_cs@pku.edu.cn
-
- 31 Jan, 2022 6 commits
-
-
Daniel Vetter authored
Hammer it a bit more in that iterators can be restarted and when that matters, plus suggest to prefer the locked version whenver. Also delete the two leftover kerneldoc for static functions plus sprinkle some more links while at it. v2: Keep some comments (Christian) Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20211130152756.1388106-1-daniel.vetter@ffwll.ch
-
Tomohito Esaki authored
The allow_fb_modifiers flag is unnecessary since it has been replaced with fb_modifiers_not_supported flag. v3: - change the order as follows: 1. add fb_modifiers_not_supported flag 2. add default modifiers 3. remove allow_fb_modifiers flag v5: - keep a sanity check in plane init func Signed-off-by:
Tomohito Esaki <etom@igel.co.jp> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220128060836.11216-4-etom@igel.co.jp
-
Tomohito Esaki authored
The LINEAR modifier is advertised as default if a driver doesn't specify modifiers. v2: - rebase to the latest master branch (5.16.0+) + "drm/plane: Make format_mod_supported truly optional" patch [1] [1] https://patchwork.freedesktop.org/patch/467940/?series=98255&rev=3 v3: - change the order as follows: 1. add fb_modifiers_not_supported flag 2. add default modifiers 3. remove allow_fb_modifiers flag v5: - change default_modifiers array from non-static to static - remove terminator in default_modifiers array - use ARRAY_SIZE to get the format_modifier_count - update sanity check in plane init func to use the fb_modifiers_not_supported - modify kernel docs Signed-off-by: -
Tomohito Esaki authored
If only linear modifier is advertised, since there are many drivers that only linear supported, the DRM core should handle this rather than open-coding in every driver. However, there are legacy drivers such as radeon that do not support modifiers but infer the actual layout of the underlying buffer. Therefore, a new flag fb_modifiers_not_supported is introduced for these legacy drivers, and allow_fb_modifiers is replaced with this new flag. v3: - change the order as follows: 1. add fb_modifiers_not_supported flag 2. add default modifiers 3. remove allow_fb_modifiers flag - add a conditional disable in amdgpu_dm_plane_init() v4: - modify kernel docs v5: - modify kernel docs Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
-
Christophe JAILLET authored
If lt9611_audio_init() fails, some resources still need to be released before returning an error code. Add the missing goto the error handling path. Fixes: 23278bf5 ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Yongzhi Liu authored
pm_runtime_get_sync() will increase the rumtime PM counter even when it returns an error. Thus a pairing decrement is needed to prevent refcount leak. Fix this by replacing this API with pm_runtime_resume_and_get(), which will not change the runtime PM counter on error. Besides, a matching decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
-
- 27 Jan, 2022 30 commits
-
-
Javier Martinez Canillas authored
According to disable Documentation/admin-guide/kernel-parameters.txt, this parameter can be used to disable kernel modesetting. DRM drivers will not perform display-mode changes or accelerated rendering and only the system framebuffer will be available if it was set-up. But only a few DRM drivers currently check for nomodeset, make this driver to also support the command line parameter. Signed-off-by:
Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by:
-
Javier Martinez Canillas authored
According to disable Documentation/admin-guide/kernel-parameters.txt, this parameter can be used to disable kernel modesetting. DRM drivers will not perform display-mode changes or accelerated rendering and only the system framebuffer will be available if it was set-up. But only a few DRM drivers currently check for nomodeset, make this driver to also support the command line parameter. Signed-off-by:
Jyri Sarha <jyri.sarha@iki.fi> Acked-by:
-
Javier Martinez Canillas authored
According to disable Documentation/admin-guide/kernel-parameters.txt, this parameter can be used to disable kernel modesetting. DRM drivers will not perform display-mode changes or accelerated rendering and only the system framebuffer will be available if it was set-up. But only a few DRM drivers currently check for nomodeset, make this driver to also support the command line parameter. Signed-off-by:
-
Javier Martinez Canillas authored
According to disable Documentation/admin-guide/kernel-parameters.txt, this parameter can be used to disable kernel modesetting. DRM drivers will not perform display-mode changes or accelerated rendering and only the system framebuffer will be available if it was set-up. But only a few DRM drivers currently check for nomodeset, make this driver to also support the command line parameter. Signed-off-by:
-
Javier Martinez Canillas authored
According to disable Documentation/admin-guide/kernel-parameters.txt, this parameter can be used to disable kernel modesetting. DRM drivers will not perform display-mode changes or accelerated rendering and only the system framebuffer will be available if it was set-up. But only a few DRM drivers currently check for nomodeset, make this driver to also support the command line parameter. Signed-off-by:
-
Javier Martinez Canillas authored
According to disable Documentation/admin-guide/kernel-parameters.txt, this parameter can be used to disable kernel modesetting. DRM drivers will not perform display-mode changes or accelerated rendering and only the system framebuffer will be available if it was set-up. But only a few DRM drivers currently check for nomodeset, make this driver to also support the command line parameter. Signed-off-by:
-
Javier Martinez Canillas authored
According to disable Documentation/admin-guide/kernel-parameters.txt, this parameter can be used to disable kernel modesetting. DRM drivers will not perform display-mode changes or accelerated rendering and only the system framebuffer will be available if it was set-up. But only a few DRM drivers currently check for nomodeset, make this driver to also support the command line parameter. Signed-off-by:
-
Javier Martinez Canillas authored
According to disable Documentation/admin-guide/kernel-parameters.txt, this parameter can be used to disable kernel modesetting. DRM drivers will not perform display-mode changes or accelerated rendering and only the system framebuffer will be available if it was set-up. But only a few DRM drivers currently check for nomodeset, make this driver to also support the command line parameter. Signed-off-by:
-
Javier Martinez Canillas authored
According to disable Documentation/admin-guide/kernel-parameters.txt, this parameter can be used to disable kernel modesetting. DRM drivers will not perform display-mode changes or accelerated rendering and only the system framebuffer will be available if it was set-up. But only a few DRM drivers currently check for nomodeset, make this driver to also support the command line parameter. Signed-off-by:
-
Javier Martinez Canillas authored
According to disable Documentation/admin-guide/kernel-parameters.txt, this parameter can be used to disable kernel modesetting. DRM drivers will not perform display-mode changes or accelerated rendering and only the system framebuffer will be available if it was set-up. But only a few DRM drivers currently check for nomodeset, make this driver to also support the command line parameter. Signed-off-by:
-
Javier Martinez Canillas authored
According to disable Documentation/admin-guide/kernel-parameters.txt, this parameter can be used to disable kernel modesetting. DRM drivers will not perform display-mode changes or accelerated rendering and only the system framebuffer will be available if it was set-up. But only a few DRM drivers currently check for nomodeset, make this driver to also support the command line parameter. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
-
Javier Martinez Canillas authored
According to disable Documentation/admin-guide/kernel-parameters.txt, this parameter can be used to disable kernel modesetting. DRM drivers will not perform display-mode changes or accelerated rendering and only the system framebuffer will be available if it was set-up. But only a few DRM drivers currently check for nomodeset, make this driver to also support the command line parameter. Signed-off-by:
-
Javier Martinez Canillas authored
According to disable Documentation/admin-guide/kernel-parameters.txt, this parameter can be used to disable kernel modesetting. DRM drivers will not perform display-mode changes or accelerated rendering and only the system framebuffer will be available if it was set-up. But only a few DRM drivers currently check for nomodeset, make this driver to also support the command line parameter. Signed-off-by:
-
Javier Martinez Canillas authored
According to disable Documentation/admin-guide/kernel-parameters.txt, this parameter can be used to disable kernel modesetting. DRM drivers will not perform display-mode changes or accelerated rendering and only the system framebuffer will be available if it was set-up. But only a few DRM drivers currently check for nomodeset, make this driver to also support the command line parameter. Signed-off-by:
Deepak Rawat <drawat.floss@gmail.com> Acked-by:
-
Javier Martinez Canillas authored
According to disable Documentation/admin-guide/kernel-parameters.txt, this parameter can be used to disable kernel modesetting. DRM drivers will not perform display-mode changes or accelerated rendering and only the system framebuffer will be available if it was set-up. But only a few DRM drivers currently check for nomodeset, make this driver to also support the command line parameter. Signed-off-by:
-
Javier Martinez Canillas authored
According to disable Documentation/admin-guide/kernel-parameters.txt, this parameter can be used to disable kernel modesetting. DRM drivers will not perform display-mode changes or accelerated rendering and only the system framebuffer will be available if it was set-up. But only a few DRM drivers currently check for nomodeset, make this driver to also support the command line parameter. Signed-off-by:
-
Javier Martinez Canillas authored
According to disable Documentation/admin-guide/kernel-parameters.txt, this parameter can be used to disable kernel modesetting. DRM drivers will not perform display-mode changes or accelerated rendering and only the system framebuffer will be available if it was set-up. But only a few DRM drivers currently check for nomodeset, make this driver to also support the command line parameter. Signed-off-by:
-
Javier Martinez Canillas authored
The macro calls to a DRM specific platform driver init handler that checks whether the driver is allowed to be registered or not. Signed-off-by:
-
Javier Martinez Canillas authored
The macro calls to a DRM specific platform driver init handler that checks whether the driver is allowed to be registered or not. Signed-off-by:
-
Javier Martinez Canillas authored
The macro calls to a DRM specific platform driver init handler that checks whether the driver is allowed to be registered or not. Signed-off-by:
-
Javier Martinez Canillas authored
The macro calls to a DRM specific platform driver init handler that checks whether the driver is allowed to be registered or not. Signed-off-by:
-
Javier Martinez Canillas authored
The macro calls to a DRM specific platform driver init handler that checks whether the driver is allowed to be registered or not. Signed-off-by:
-
Javier Martinez Canillas authored
The macro calls to a DRM specific platform driver init handler that checks whether the driver is allowed to be registered or not. Signed-off-by:
-
Javier Martinez Canillas authored
The macro calls to a DRM specific platform driver init handler that checks whether the driver is allowed to be registered or not. Signed-off-by:
-
Javier Martinez Canillas authored
The macro calls to a DRM specific platform driver init handler that checks whether the driver is allowed to be registered or not. Signed-off-by:
-
Javier Martinez Canillas authored
The macro calls to a DRM specific platform driver init handler that checks whether the driver is allowed to be registered or not. Signed-off-by:
-
Javier Martinez Canillas authored
The macro calls to a DRM specific platform driver init handler that checks whether the driver is allowed to be registered or not. Signed-off-by:
-
Javier Martinez Canillas authored
The macro calls to a DRM specific platform driver init handler that checks whether the driver is allowed to be registered or not. Signed-off-by:
-
Javier Martinez Canillas authored
The macro calls to a DRM specific platform driver init handler that checks whether the driver is allowed to be registered or not. Signed-off-by:
-
Javier Martinez Canillas authored
The macro calls to a DRM specific platform driver init handler that checks whether the driver is allowed to be registered or not. Signed-off-by:
-
